Merge "msm_11ad: Add 11ad platform driver" into msm-4.9

wil6210 - Qualcomm Technologies Inc. 802.11ad Wireless Driver

wil6210 driver is responsible for managing 802.11ad chipset

connected to MSM over PCIe interface.

The platform data is needed in order to perform proper

bus-scaling and SMMU initialization by the driver.

Required properties:

- compatible: "qcom,wil6210"

- qcom,smmu-support: Boolean flag indicating whether PCIe has SMMU support

- qcom,pcie-parent: phandle for the PCIe root complex to which 11ad card is connected

- Refer to "Documentation/devicetree/bindings/arm/msm/msm_bus.txt" for

  the below optional properties:

	- qcom,msm-bus,name

	- qcom,msm-bus,num-cases

	- qcom,msm-bus,num-paths

	- qcom,msm-bus,vectors-KBps

Optional properties:

- qcom,sleep-clk-en: GPIO for sleep clock used for low power modes by 11ad card

- qcom,wigig-en: Enable GPIO connected to 11ad card

- qcom,use-ext-supply: Boolean flag to indicate if 11ad SIP uses external power supply

- vdd-supply: phandle to 11ad VDD regulator node

- vddio-supply: phandle to 11ad VDDIO regulator node

- qcom,use-ext-clocks: Boolean flag to indicate if 11ad SIP uses external clocks

- clocks	    : List of phandle and clock specifier pairs

- clock-names       : List of clock input name strings sorted in the same

		      order as the clocks property.

Example:

	wil6210: qcom,wil6210 {

		compatible = "qcom,wil6210";

		qcom,smmu-support;

		qcom,pcie-parent = <&pcie1>;

		qcom,wigig-en = <&tlmm 94 0>;

		qcom,msm-bus,name = "wil6210";

		qcom,msm-bus,num-cases = <2>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

			<100 512 0 0>,

			<100 512 600000 800000>; /* ~4.6Gbps (MCS12) */

		qcom,use-ext-supply;

		vdd-supply= <&pm8998_s7>;

		vddio-supply= <&pm8998_s5>;

		qcom,use-ext-clocks;

		clocks = <&clock_gcc clk_rf_clk3>,

			 <&clock_gcc clk_rf_clk3_pin>;

		clock-names = "rf_clk3_clk", "rf_clk3_pin_clk";

	};

	  option if you are interested in debugging the driver.

	  If unsure, say Y to make it easier to debug problems.

config WIL6210_PLATFORM_MSM

	bool "wil6210 MSM platform specific support"

	depends on WIL6210

	depends on ARCH_QCOM

	default y

	---help---

	  Say Y here to enable wil6210 driver support for MSM

	  platform specific features

CFLAGS_trace.o := -I$(src)

subdir-ccflags-y += -D__CHECK_ENDIAN__

MSM_11AD_PATH = drivers/platform/msm/msm_11ad

CFLAGS_wil_platform.o := -I$(MSM_11AD_PATH)

#include <linux/device.h>

#include "wil_platform.h"

#include "msm_11ad.h"

int __init wil_platform_modinit(void)

{

	return 0;

	return msm_11ad_modinit();

}

void wil_platform_modexit(void)

{

	msm_11ad_modexit();

}

/**

void *wil_platform_init(struct device *dev, struct wil_platform_ops *ops,

			const struct wil_platform_rops *rops, void *wil_handle)

{

	void *handle = ops; /* to return some non-NULL for 'void' impl. */

	void *handle;

	if (!ops) {

		dev_err(dev,

		return NULL;

	}

	/* platform specific init functions should be called here */

	handle = msm_11ad_dev_init(dev, ops, rops, wil_handle);

	return handle;

}

	  numbers in the kernel log along with the PMIC option status. The PMIC

	  type is mapped to a QTI chip part number and logged as well.

config MSM_MHI_DEV

        tristate "Modem Device Interface Driver"

	depends on EP_PCIE && IPA

	  Enabling this option adds USB BAM Driver.

	  USB BAM driver was added to supports SPS Peripheral-to-Peripheral

	  transfers between the USB and other peripheral.

config MSM_11AD

	tristate "Platform driver for 11ad chip"

	depends on PCI

	depends on PCI_MSM

	default n

	---help---

	  This module adds required platform support for wireless adapter based on

	  Qualcomm Technologies, Inc. 11ad chip, integrated into MSM platform

	  If you choose to build it as a module, it will be called

	  msm_11ad_proxy.

endmenu