Loading arch/arm64/boot/dts/qcom/sdm845-v2-camera-sensor-mtp-robotics.dtsi 0 → 100644 +582 −0 Original line number Diff line number Diff line /* * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { led_flash_rear: qcom,camera-flash@0 { cell-index = <0>; reg = <0x00 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash0 &pmi8998_flash1>; torch-source = <&pmi8998_torch0 &pmi8998_torch1>; switch-source = <&pmi8998_switch0>; status = "ok"; }; led_flash_rear_aux: qcom,camera-flash@1 { cell-index = <1>; reg = <0x01 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash0 &pmi8998_flash1>; torch-source = <&pmi8998_torch0 &pmi8998_torch1>; switch-source = <&pmi8998_switch0>; status = "ok"; }; led_flash_front: qcom,camera-flash@2 { cell-index = <2>; reg = <0x02 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash2>; torch-source = <&pmi8998_torch2>; switch-source = <&pmi8998_switch1>; status = "ok"; }; led_flash_iris: qcom,camera-flash@3 { cell-index = <3>; reg = <0x03 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash2>; torch-source = <&pmi8998_torch2>; switch-source = <&pmi8998_switch2>; status = "ok"; }; actuator_regulator: gpio-regulator@0 { compatible = "regulator-fixed"; reg = <0x00 0x00>; regulator-name = "actuator_regulator"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-enable-ramp-delay = <100>; enable-active-high; gpio = <&tlmm 27 0>; vin-supply = <&pmi8998_bob>; }; camera_rear_ldo: gpio-regulator@1 { compatible = "regulator-fixed"; reg = <0x01 0x00>; regulator-name = "camera_rear_ldo"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-enable-ramp-delay = <135>; enable-active-high; gpio = <&pm8998_gpios 12 0>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_dvdd_en_default>; vin-supply = <&pm8998_s3>; }; camera_ldo: gpio-regulator@2 { compatible = "regulator-fixed"; reg = <0x02 0x00>; regulator-name = "camera_ldo"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-enable-ramp-delay = <233>; enable-active-high; gpio = <&pm8998_gpios 9 0>; pinctrl-names = "default"; pinctrl-0 = <&camera_dvdd_en_default>; vin-supply = <&pm8998_s3>; }; camera_vana_ldo: gpio-regulator@4 { compatible = "regulator-fixed"; reg = <0x04 0x00>; regulator-name = "camera_vana_ldo"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-enable-ramp-delay = <233>; enable-active-high; gpio = <&tlmm 8 0>; pinctrl-names = "default"; pinctrl-0 = <&cam_sensor_rear_vana>; vin-supply = <&pmi8998_bob>; }; }; &cam_cci { qcom,cam-res-mgr { compatible = "qcom,cam-res-mgr"; status = "ok"; }; actuator_rear: qcom,actuator@0 { cell-index = <0>; reg = <0x0>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; actuator_rear_aux: qcom,actuator@1 { cell-index = <1>; reg = <0x1>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; actuator_front: qcom,actuator@2 { cell-index = <2>; reg = <0x2>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; ois_rear: qcom,ois@0 { cell-index = <0>; reg = <0x0>; compatible = "qcom,ois"; cci-master = <0>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; status = "ok"; }; eeprom_rear: qcom,eeprom@0 { cell-index = <0>; reg = <0>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0 2800000>; rgltr-max-voltage = <0 3600000 1050000 0 2800000>; rgltr-load-current = <0 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>; gpios = <&tlmm 13 0>, <&tlmm 80 0>, <&tlmm 79 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_rear_aux: qcom,eeprom@1 { cell-index = <1>; reg = <0x1>; compatible = "qcom,eeprom"; cam_vdig-supply = <&camera_ldo>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vdig", "cam_vio", "cam_vana", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1050000 0 3312000 0 2800000>; rgltr-max-voltage = <1050000 0 3600000 0 2800000>; rgltr-load-current = <105000 0 80000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_rear2_active>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_rear2_suspend>; gpios = <&tlmm 15 0>, <&tlmm 9 0>, <&tlmm 8 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1", "CAM_VANA1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_front: qcom,eeprom@2 { cell-index = <2>; reg = <0x2>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0 2800000>; rgltr-max-voltage = <0 3600000 1050000 0 2800000>; rgltr-load-current = <0 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>, <&tlmm 8 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2", "CAM_VANA2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_back: qcom,eeprom@3 { cell-index = <3>; reg = <0x3>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 3312000 1050000 0 2800000>; rgltr-max-voltage = <1800000 3600000 1050000 0 2800000>; rgltr-load-current = <80000 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend>; gpios = <&tlmm 13 0>; gpio-req-tbl-num = <0>; gpio-req-tbl-flags = <1>; gpio-req-tbl-label = "CAMIF_MCLK0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@0 { cell-index = <0>; compatible = "qcom,cam-sensor"; reg = <0x0>; csiphy-sd-index = <0>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; led-flash-src = <&led_flash_rear>; actuator-src = <&actuator_rear>; ois-src = <&ois_rear>; eeprom-src = <&eeprom_rear>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0>; rgltr-max-voltage = <0 3600000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>; gpios = <&tlmm 13 0>, <&tlmm 80 0>, <&tlmm 79 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@1 { cell-index = <1>; compatible = "qcom,cam-sensor"; reg = <0x1>; csiphy-sd-index = <1>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; actuator-src = <&actuator_rear_aux>; led-flash-src = <&led_flash_rear_aux>; eeprom-src = <&eeprom_rear_aux>; cam_vdig-supply = <&camera_ldo>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vdig", "cam_vio", "cam_vana", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <1050000 0 2850000 0>; rgltr-max-voltage = <1050000 0 2850000 0>; rgltr-load-current = <105000 0 80000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_rear2_active>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_rear2_suspend>; gpios = <&tlmm 15 0>, <&tlmm 9 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@2 { cell-index = <2>; compatible = "qcom,cam-sensor"; reg = <0x02>; csiphy-sd-index = <2>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; eeprom-src = <&eeprom_front>; actuator-src = <&actuator_front>; led-flash-src = <&led_flash_front>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@3 { cell-index = <3>; compatible = "qcom,cam-sensor"; reg = <0x03>; csiphy-sd-index = <3>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; led-flash-src = <&led_flash_iris>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_iris_active>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_iris_suspend>; gpios = <&tlmm 16 0>, <&tlmm 9 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@4 { cell-index = <4>; compatible = "qcom,cam-sensor"; reg = <0x4>; csiphy-sd-index = <0>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; actuator-src = <>; led-flash-src = <>; eeprom-src = <&eeprom_back>; cam_vdig-supply = <>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pm8998_s4>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 1800000 0>; rgltr-max-voltage = <1800000 1800000 0>; rgltr-load-current = <80000 100000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear4_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear4_suspend>; gpios = <&tlmm 13 0>, <&tlmm 11 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@5 { cell-index = <5>; compatible = "qcom,cam-sensor"; reg = <0x05>; csiphy-sd-index = <1>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; led-flash-src = <>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; }; arch/arm64/boot/dts/qcom/sdm845-v2-robotics.dts +2 −0 Original line number Diff line number Diff line Loading @@ -16,6 +16,8 @@ #include "sdm845-v2.dtsi" #include "sdm845-sde-display.dtsi" #include "sdm845-mtp.dtsi" #include "sdm845-v2-robotics.dtsi" #include "sdm845-v2-camera-sensor-mtp-robotics.dtsi" / { model = "Qualcomm Technologies, Inc. MSM sdm845 V2 Robotics MTP"; Loading arch/arm64/boot/dts/qcom/sdm845-v2-robotics.dtsi 0 → 100644 +44 −0 Original line number Diff line number Diff line /* * Copyright (c) 2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &tlmm { cam_sensor_rear4_active: cam_sensor_rear4_active { /* RESET */ mux { pins = "gpio11"; function = "gpio"; }; config { pins = "gpio11"; bias-disable; /* No PULL */ drive-strength = <2>; /* 2 MA */ }; }; cam_sensor_rear4_suspend: cam_sensor_rear4_suspend { /* RESET */ mux { pins = "gpio11"; function = "gpio"; }; config { pins = "gpio11"; bias-pull-down; /* PULL DOWN */ drive-strength = <2>; /* 2 MA */ output-low; }; }; }; Loading
arch/arm64/boot/dts/qcom/sdm845-v2-camera-sensor-mtp-robotics.dtsi 0 → 100644 +582 −0 Original line number Diff line number Diff line /* * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { led_flash_rear: qcom,camera-flash@0 { cell-index = <0>; reg = <0x00 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash0 &pmi8998_flash1>; torch-source = <&pmi8998_torch0 &pmi8998_torch1>; switch-source = <&pmi8998_switch0>; status = "ok"; }; led_flash_rear_aux: qcom,camera-flash@1 { cell-index = <1>; reg = <0x01 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash0 &pmi8998_flash1>; torch-source = <&pmi8998_torch0 &pmi8998_torch1>; switch-source = <&pmi8998_switch0>; status = "ok"; }; led_flash_front: qcom,camera-flash@2 { cell-index = <2>; reg = <0x02 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash2>; torch-source = <&pmi8998_torch2>; switch-source = <&pmi8998_switch1>; status = "ok"; }; led_flash_iris: qcom,camera-flash@3 { cell-index = <3>; reg = <0x03 0x00>; compatible = "qcom,camera-flash"; flash-source = <&pmi8998_flash2>; torch-source = <&pmi8998_torch2>; switch-source = <&pmi8998_switch2>; status = "ok"; }; actuator_regulator: gpio-regulator@0 { compatible = "regulator-fixed"; reg = <0x00 0x00>; regulator-name = "actuator_regulator"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-enable-ramp-delay = <100>; enable-active-high; gpio = <&tlmm 27 0>; vin-supply = <&pmi8998_bob>; }; camera_rear_ldo: gpio-regulator@1 { compatible = "regulator-fixed"; reg = <0x01 0x00>; regulator-name = "camera_rear_ldo"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-enable-ramp-delay = <135>; enable-active-high; gpio = <&pm8998_gpios 12 0>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_dvdd_en_default>; vin-supply = <&pm8998_s3>; }; camera_ldo: gpio-regulator@2 { compatible = "regulator-fixed"; reg = <0x02 0x00>; regulator-name = "camera_ldo"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-enable-ramp-delay = <233>; enable-active-high; gpio = <&pm8998_gpios 9 0>; pinctrl-names = "default"; pinctrl-0 = <&camera_dvdd_en_default>; vin-supply = <&pm8998_s3>; }; camera_vana_ldo: gpio-regulator@4 { compatible = "regulator-fixed"; reg = <0x04 0x00>; regulator-name = "camera_vana_ldo"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-enable-ramp-delay = <233>; enable-active-high; gpio = <&tlmm 8 0>; pinctrl-names = "default"; pinctrl-0 = <&cam_sensor_rear_vana>; vin-supply = <&pmi8998_bob>; }; }; &cam_cci { qcom,cam-res-mgr { compatible = "qcom,cam-res-mgr"; status = "ok"; }; actuator_rear: qcom,actuator@0 { cell-index = <0>; reg = <0x0>; compatible = "qcom,actuator"; cci-master = <0>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; actuator_rear_aux: qcom,actuator@1 { cell-index = <1>; reg = <0x1>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; actuator_front: qcom,actuator@2 { cell-index = <2>; reg = <0x2>; compatible = "qcom,actuator"; cci-master = <1>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; }; ois_rear: qcom,ois@0 { cell-index = <0>; reg = <0x0>; compatible = "qcom,ois"; cci-master = <0>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <2800000>; rgltr-max-voltage = <2800000>; rgltr-load-current = <0>; status = "ok"; }; eeprom_rear: qcom,eeprom@0 { cell-index = <0>; reg = <0>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0 2800000>; rgltr-max-voltage = <0 3600000 1050000 0 2800000>; rgltr-load-current = <0 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>; gpios = <&tlmm 13 0>, <&tlmm 80 0>, <&tlmm 79 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_rear_aux: qcom,eeprom@1 { cell-index = <1>; reg = <0x1>; compatible = "qcom,eeprom"; cam_vdig-supply = <&camera_ldo>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vdig", "cam_vio", "cam_vana", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1050000 0 3312000 0 2800000>; rgltr-max-voltage = <1050000 0 3600000 0 2800000>; rgltr-load-current = <105000 0 80000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_rear2_active>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_rear2_suspend>; gpios = <&tlmm 15 0>, <&tlmm 9 0>, <&tlmm 8 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1", "CAM_VANA1"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_front: qcom,eeprom@2 { cell-index = <2>; reg = <0x2>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0 2800000>; rgltr-max-voltage = <0 3600000 1050000 0 2800000>; rgltr-load-current = <0 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>, <&tlmm 8 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2", "CAM_VANA2"; sensor-position = <1>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; eeprom_back: qcom,eeprom@3 { cell-index = <3>; reg = <0x3>; compatible = "qcom,eeprom"; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; cam_vaf-supply = <&actuator_regulator>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 3312000 1050000 0 2800000>; rgltr-max-voltage = <1800000 3600000 1050000 0 2800000>; rgltr-load-current = <80000 80000 105000 0 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend>; gpios = <&tlmm 13 0>; gpio-req-tbl-num = <0>; gpio-req-tbl-flags = <1>; gpio-req-tbl-label = "CAMIF_MCLK0"; sensor-position = <0>; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@0 { cell-index = <0>; compatible = "qcom,cam-sensor"; reg = <0x0>; csiphy-sd-index = <0>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; led-flash-src = <&led_flash_rear>; actuator-src = <&actuator_rear>; ois-src = <&ois_rear>; eeprom-src = <&eeprom_rear>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pmi8998_bob>; cam_vdig-supply = <&camera_rear_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 3312000 1050000 0>; rgltr-max-voltage = <0 3600000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>; gpios = <&tlmm 13 0>, <&tlmm 80 0>, <&tlmm 79 0>; gpio-reset = <1>; gpio-vana = <2>; gpio-req-tbl-num = <0 1 2>; gpio-req-tbl-flags = <1 0 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0", "CAM_VANA"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@1 { cell-index = <1>; compatible = "qcom,cam-sensor"; reg = <0x1>; csiphy-sd-index = <1>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; actuator-src = <&actuator_rear_aux>; led-flash-src = <&led_flash_rear_aux>; eeprom-src = <&eeprom_rear_aux>; cam_vdig-supply = <&camera_ldo>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vdig", "cam_vio", "cam_vana", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <1050000 0 2850000 0>; rgltr-max-voltage = <1050000 0 2850000 0>; rgltr-load-current = <105000 0 80000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_rear2_active>; pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_rear2_suspend>; gpios = <&tlmm 15 0>, <&tlmm 9 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET1"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@2 { cell-index = <2>; compatible = "qcom,cam-sensor"; reg = <0x02>; csiphy-sd-index = <2>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; eeprom-src = <&eeprom_front>; actuator-src = <&actuator_front>; led-flash-src = <&led_flash_front>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@3 { cell-index = <3>; compatible = "qcom,cam-sensor"; reg = <0x03>; csiphy-sd-index = <3>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; led-flash-src = <&led_flash_iris>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk3_active &cam_sensor_iris_active>; pinctrl-1 = <&cam_sensor_mclk3_suspend &cam_sensor_iris_suspend>; gpios = <&tlmm 16 0>, <&tlmm 9 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK3", "CAM_RESET3"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@4 { cell-index = <4>; compatible = "qcom,cam-sensor"; reg = <0x4>; csiphy-sd-index = <0>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <180>; actuator-src = <>; led-flash-src = <>; eeprom-src = <&eeprom_back>; cam_vdig-supply = <>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&pm8998_s4>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <1800000 1800000 0>; rgltr-max-voltage = <1800000 1800000 0>; rgltr-load-current = <80000 100000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear4_active>; pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear4_suspend>; gpios = <&tlmm 13 0>, <&tlmm 11 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET0"; sensor-mode = <0>; cci-master = <0>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; qcom,cam-sensor@5 { cell-index = <5>; compatible = "qcom,cam-sensor"; reg = <0x05>; csiphy-sd-index = <1>; sensor-position-roll = <270>; sensor-position-pitch = <0>; sensor-position-yaw = <0>; led-flash-src = <>; cam_vio-supply = <&pm8998_lvs1>; cam_vana-supply = <&camera_vana_ldo>; cam_vdig-supply = <&camera_ldo>; cam_clk-supply = <&titan_top_gdsc>; regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; rgltr-cntrl-support; rgltr-min-voltage = <0 2850000 1050000 0>; rgltr-max-voltage = <0 2850000 1050000 0>; rgltr-load-current = <0 80000 105000 0>; gpio-no-mux = <0>; pinctrl-names = "cam_default", "cam_suspend"; pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_active>; pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_suspend>; gpios = <&tlmm 14 0>, <&tlmm 28 0>; gpio-reset = <1>; gpio-req-tbl-num = <0 1>; gpio-req-tbl-flags = <1 0>; gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET2"; sensor-mode = <0>; cci-master = <1>; status = "ok"; clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; clock-names = "cam_clk"; clock-cntl-level = "turbo"; clock-rates = <24000000>; }; };
arch/arm64/boot/dts/qcom/sdm845-v2-robotics.dts +2 −0 Original line number Diff line number Diff line Loading @@ -16,6 +16,8 @@ #include "sdm845-v2.dtsi" #include "sdm845-sde-display.dtsi" #include "sdm845-mtp.dtsi" #include "sdm845-v2-robotics.dtsi" #include "sdm845-v2-camera-sensor-mtp-robotics.dtsi" / { model = "Qualcomm Technologies, Inc. MSM sdm845 V2 Robotics MTP"; Loading
arch/arm64/boot/dts/qcom/sdm845-v2-robotics.dtsi 0 → 100644 +44 −0 Original line number Diff line number Diff line /* * Copyright (c) 2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &tlmm { cam_sensor_rear4_active: cam_sensor_rear4_active { /* RESET */ mux { pins = "gpio11"; function = "gpio"; }; config { pins = "gpio11"; bias-disable; /* No PULL */ drive-strength = <2>; /* 2 MA */ }; }; cam_sensor_rear4_suspend: cam_sensor_rear4_suspend { /* RESET */ mux { pins = "gpio11"; function = "gpio"; }; config { pins = "gpio11"; bias-pull-down; /* PULL DOWN */ drive-strength = <2>; /* 2 MA */ output-low; }; }; };
