Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 689f891c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Pull some more input subsystem updates from Dmitry Torokhov:
 "An update to the ALPS driver to support the V8 protocol with
  touchstick, a change for i8042 to skip selftest on many Asus laptops
  which helps to keep their touchpads working after resume, and a couple
  other driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - skip selftest on ASUS laptops
  Input: melfas_mip4 - add ic_name sysfs attribute
  Input: melfas_mip4 - add maintainer information
  Input: melfas_mip4 - add devicetree binding documentations
  Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
  Input: synaptics-rmi4 - fix error handling in I2C transport driver
  Input: synaptics-rmi4 - fix error handling in SPI transport driver
  Input: ALPS - add V8 protocol documentation
  Input: ALPS - set DualPoint flag for 74 03 28 devices
  Input: ALPS - allow touchsticks to report pressure
  Input: ALPS - handle 0-pressure 1F events
  Input: ALPS - add touchstick support for SS5 hardware
  Input: elantech - force needed quirks on Fujitsu H760
  Input: elantech - fix Lenovo version typo
parents 8b70f716 1134ca26
Loading
Loading
Loading
Loading
+21 −0
Original line number Diff line number Diff line
* MELFAS MIP4 Touchscreen

Required properties:
- compatible: must be "melfas,mip4_ts"
- reg: I2C slave address of the chip (0x48 or 0x34)
- interrupt-parent: interrupt controller to which the chip is connected
- interrupts: interrupt to which the chip is connected

Optional properties:
- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip

Example:
	i2c@00000000 {
		touchscreen: melfas_mip4@48 {
			compatible = "melfas,mip4_ts";
			reg = <0x48>;
			interrupt-parent = <&gpio>;
			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
			ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
		};
	};
+1 −0
Original line number Diff line number Diff line
@@ -163,6 +163,7 @@ maxim Maxim Integrated Products
meas	Measurement Specialties
mediatek	MediaTek Inc.
melexis	Melexis N.V.
melfas	MELFAS Inc.
merrii	Merrii Technology Co., Ltd.
micrel	Micrel Inc.
microchip	Microchip Technology Inc.
+57 −0
Original line number Diff line number Diff line
@@ -319,3 +319,60 @@ For touchpad packet, the format is:
               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
               in NEW fmt
 F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...


ALPS Absolute Mode - Protocol Version 8
---------------------------------------

Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware.

The packet type is given by the APD field, bits 4-5 of byte 3.

Touchpad packet (APD = 0x2):

           b7   b6   b5   b4   b3   b2   b1   b0
 byte 0:  SWM  SWR  SWL    1    1    0    0   X7
 byte 1:    0   X6   X5   X4   X3   X2   X1   X0
 byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
 byte 3:    0  T&P    1    0    1    0    0   Y7
 byte 4:    0   Z6   Z5   Z4   Z3   Z2   Z1   Z0
 byte 5:    0    0    0    0    0    0    0    0

SWM, SWR, SWL: Middle, Right, and Left button states

Touchpad 1 Finger packet (APD = 0x0):

           b7   b6   b5   b4   b3   b2   b1   b0
 byte 0:  SWM  SWR  SWL    1    1   X2   X1   X0
 byte 1:   X9   X8   X7    1   X6   X5   X4   X3
 byte 2:    0  X11  X10  LFB   Y3   Y2   Y1   Y0
 byte 3:   Y5   Y4    0    0    1 TAPF2 TAPF1 TAPF0
 byte 4:  Zv7  Y11  Y10    1   Y9   Y8   Y7   Y6
 byte 5:  Zv6  Zv5  Zv4    0  Zv3  Zv2  Zv1  Zv0

TAPF: ???
LFB:  ???

Touchpad 2 Finger packet (APD = 0x1):

           b7   b6   b5   b4   b3   b2   b1   b0
 byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
 byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
 byte 2: AY11 AY10  AY9  CONT AY8  AY7  AY6  AY5
 byte 3:    0    0    0    1    1  BX6  BX5  BX4
 byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
 byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5

CONT: A 3-or-4 Finger packet is to follow

Touchpad 3-or-4 Finger packet (APD = 0x3):

           b7   b6   b5   b4   b3   b2   b1   b0
 byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
 byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
 byte 2: AY11 AY10  AY9  OVF  AY8  AY7  AY6  AY5
 byte 3:    0    0    1    1    1  BX6  BX5  BX4
 byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
 byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5

OVF: 5th finger detected
+8 −1
Original line number Diff line number Diff line
@@ -1511,7 +1511,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
			     controllers
	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
	i8042.reset	[HW] Reset the controller during init and cleanup
	i8042.reset	[HW] Reset the controller during init, cleanup and
			     suspend-to-ram transitions, only during s2r
			     transitions, or never reset
			Format: { 1 | Y | y | 0 | N | n }
			1, Y, y: always reset controller
			0, N, n: don't ever reset controller
			Default: only on s2r transitions on x86; most other
			architectures force reset to be always executed
	i8042.unlock	[HW] Unlock (ignore) the keylock
	i8042.kbdreset  [HW] Reset device connected to KBD port

+7 −0
Original line number Diff line number Diff line
@@ -7829,6 +7829,13 @@ F: Documentation/scsi/megaraid.txt
F:	drivers/scsi/megaraid.*
F:	drivers/scsi/megaraid/

MELFAS MIP4 TOUCHSCREEN DRIVER
M:	Sangwon Jee <jeesw@melfas.com>
W:	http://www.melfas.com
S:	Supported
F:	drivers/input/touchscreen/melfas_mip4.c
F:	Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt

MELLANOX ETHERNET DRIVER (mlx4_en)
M:	Tariq Toukan <tariqt@mellanox.com>
L:	netdev@vger.kernel.org
Loading