Loading Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt 0 → 100644 +21 −0 Original line number Diff line number Diff line * MELFAS MIP4 Touchscreen Required properties: - compatible: must be "melfas,mip4_ts" - reg: I2C slave address of the chip (0x48 or 0x34) - interrupt-parent: interrupt controller to which the chip is connected - interrupts: interrupt to which the chip is connected Optional properties: - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip Example: i2c@00000000 { touchscreen: melfas_mip4@48 { compatible = "melfas,mip4_ts"; reg = <0x48>; interrupt-parent = <&gpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; }; }; Documentation/devicetree/bindings/vendor-prefixes.txt +1 −0 Original line number Diff line number Diff line Loading @@ -143,6 +143,7 @@ marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products mediatek MediaTek Inc. melexis Melexis N.V. melfas MELFAS Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. Loading Documentation/input/alps.txt +57 −0 Original line number Diff line number Diff line Loading @@ -319,3 +319,60 @@ For touchpad packet, the format is: otherwise byte 0 bit 4 must be set and byte 0/4/5 are in NEW fmt F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... ALPS Absolute Mode - Protocol Version 8 --------------------------------------- Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware. The packet type is given by the APD field, bits 4-5 of byte 3. Touchpad packet (APD = 0x2): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 0 0 X7 byte 1: 0 X6 X5 X4 X3 X2 X1 X0 byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0 byte 3: 0 T&P 1 0 1 0 0 Y7 byte 4: 0 Z6 Z5 Z4 Z3 Z2 Z1 Z0 byte 5: 0 0 0 0 0 0 0 0 SWM, SWR, SWL: Middle, Right, and Left button states Touchpad 1 Finger packet (APD = 0x0): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 X2 X1 X0 byte 1: X9 X8 X7 1 X6 X5 X4 X3 byte 2: 0 X11 X10 LFB Y3 Y2 Y1 Y0 byte 3: Y5 Y4 0 0 1 TAPF2 TAPF1 TAPF0 byte 4: Zv7 Y11 Y10 1 Y9 Y8 Y7 Y6 byte 5: Zv6 Zv5 Zv4 0 Zv3 Zv2 Zv1 Zv0 TAPF: ??? LFB: ??? Touchpad 2 Finger packet (APD = 0x1): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 byte 2: AY11 AY10 AY9 CONT AY8 AY7 AY6 AY5 byte 3: 0 0 0 1 1 BX6 BX5 BX4 byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 CONT: A 3-or-4 Finger packet is to follow Touchpad 3-or-4 Finger packet (APD = 0x3): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 byte 2: AY11 AY10 AY9 OVF AY8 AY7 AY6 AY5 byte 3: 0 0 1 1 1 BX6 BX5 BX4 byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 OVF: 5th finger detected Documentation/kernel-parameters.txt +8 −1 Original line number Diff line number Diff line Loading @@ -1409,7 +1409,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers i8042.notimeout [HW] Ignore timeout condition signalled by controller i8042.reset [HW] Reset the controller during init and cleanup i8042.reset [HW] Reset the controller during init, cleanup and suspend-to-ram transitions, only during s2r transitions, or never reset Format: { 1 | Y | y | 0 | N | n } 1, Y, y: always reset controller 0, N, n: don't ever reset controller Default: only on s2r transitions on x86; most other architectures force reset to be always executed i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port Loading MAINTAINERS +7 −0 Original line number Diff line number Diff line Loading @@ -7155,6 +7155,13 @@ F: Documentation/scsi/megaraid.txt F: drivers/scsi/megaraid.* F: drivers/scsi/megaraid/ MELFAS MIP4 TOUCHSCREEN DRIVER M: Sangwon Jee <jeesw@melfas.com> W: http://www.melfas.com S: Supported F: drivers/input/touchscreen/melfas_mip4.c F: Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt MELLANOX ETHERNET DRIVER (mlx4_en) M: Eugenia Emantayev <eugenia@mellanox.com> L: netdev@vger.kernel.org Loading Loading
Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt 0 → 100644 +21 −0 Original line number Diff line number Diff line * MELFAS MIP4 Touchscreen Required properties: - compatible: must be "melfas,mip4_ts" - reg: I2C slave address of the chip (0x48 or 0x34) - interrupt-parent: interrupt controller to which the chip is connected - interrupts: interrupt to which the chip is connected Optional properties: - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip Example: i2c@00000000 { touchscreen: melfas_mip4@48 { compatible = "melfas,mip4_ts"; reg = <0x48>; interrupt-parent = <&gpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; }; };
Documentation/devicetree/bindings/vendor-prefixes.txt +1 −0 Original line number Diff line number Diff line Loading @@ -143,6 +143,7 @@ marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products mediatek MediaTek Inc. melexis Melexis N.V. melfas MELFAS Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. Loading
Documentation/input/alps.txt +57 −0 Original line number Diff line number Diff line Loading @@ -319,3 +319,60 @@ For touchpad packet, the format is: otherwise byte 0 bit 4 must be set and byte 0/4/5 are in NEW fmt F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... ALPS Absolute Mode - Protocol Version 8 --------------------------------------- Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware. The packet type is given by the APD field, bits 4-5 of byte 3. Touchpad packet (APD = 0x2): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 0 0 X7 byte 1: 0 X6 X5 X4 X3 X2 X1 X0 byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0 byte 3: 0 T&P 1 0 1 0 0 Y7 byte 4: 0 Z6 Z5 Z4 Z3 Z2 Z1 Z0 byte 5: 0 0 0 0 0 0 0 0 SWM, SWR, SWL: Middle, Right, and Left button states Touchpad 1 Finger packet (APD = 0x0): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 X2 X1 X0 byte 1: X9 X8 X7 1 X6 X5 X4 X3 byte 2: 0 X11 X10 LFB Y3 Y2 Y1 Y0 byte 3: Y5 Y4 0 0 1 TAPF2 TAPF1 TAPF0 byte 4: Zv7 Y11 Y10 1 Y9 Y8 Y7 Y6 byte 5: Zv6 Zv5 Zv4 0 Zv3 Zv2 Zv1 Zv0 TAPF: ??? LFB: ??? Touchpad 2 Finger packet (APD = 0x1): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 byte 2: AY11 AY10 AY9 CONT AY8 AY7 AY6 AY5 byte 3: 0 0 0 1 1 BX6 BX5 BX4 byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 CONT: A 3-or-4 Finger packet is to follow Touchpad 3-or-4 Finger packet (APD = 0x3): b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 byte 2: AY11 AY10 AY9 OVF AY8 AY7 AY6 AY5 byte 3: 0 0 1 1 1 BX6 BX5 BX4 byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 OVF: 5th finger detected
Documentation/kernel-parameters.txt +8 −1 Original line number Diff line number Diff line Loading @@ -1409,7 +1409,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers i8042.notimeout [HW] Ignore timeout condition signalled by controller i8042.reset [HW] Reset the controller during init and cleanup i8042.reset [HW] Reset the controller during init, cleanup and suspend-to-ram transitions, only during s2r transitions, or never reset Format: { 1 | Y | y | 0 | N | n } 1, Y, y: always reset controller 0, N, n: don't ever reset controller Default: only on s2r transitions on x86; most other architectures force reset to be always executed i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port Loading
MAINTAINERS +7 −0 Original line number Diff line number Diff line Loading @@ -7155,6 +7155,13 @@ F: Documentation/scsi/megaraid.txt F: drivers/scsi/megaraid.* F: drivers/scsi/megaraid/ MELFAS MIP4 TOUCHSCREEN DRIVER M: Sangwon Jee <jeesw@melfas.com> W: http://www.melfas.com S: Supported F: drivers/input/touchscreen/melfas_mip4.c F: Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt MELLANOX ETHERNET DRIVER (mlx4_en) M: Eugenia Emantayev <eugenia@mellanox.com> L: netdev@vger.kernel.org Loading
