Merge android-4.9.197(e9766ef) into msm-4.9 (234d2c71) · Commits · e / devices / android_kernel_fairphone_FP3

Documentation/usb/rio.txt

deleted100644 → 0

+0 −138

Original line number	Diff line number	Diff line
		Copyright (C) 1999, 2000 Bruce Tenison
		Portions Copyright (C) 1999, 2000 David Nelson
		Thanks to David Nelson for guidance and the usage of the scanner.txt
		and scanner.c files to model our driver and this informative file.

		Mar. 2, 2000

		CHANGES

		- Initial Revision


		OVERVIEW

		This README will address issues regarding how to configure the kernel
		to access a RIO 500 mp3 player.
		Before I explain how to use this to access the Rio500 please be warned:

		W A R N I N G:
		--------------

		Please note that this software is still under development. The authors
		are in no way responsible for any damage that may occur, no matter how
		inconsequential.

		It seems that the Rio has a problem when sending .mp3 with low batteries.
		I suggest when the batteries are low and you want to transfer stuff that you
		replace it with a fresh one. In my case, what happened is I lost two 16kb
		blocks (they are no longer usable to store information to it). But I don't
		know if that's normal or not; it could simply be a problem with the flash
		memory.

		In an extreme case, I left my Rio playing overnight and the batteries wore
		down to nothing and appear to have corrupted the flash memory. My RIO
		needed to be replaced as a result. Diamond tech support is aware of the
		problem. Do NOT allow your batteries to wear down to nothing before
		changing them. It appears RIO 500 firmware does not handle low battery
		power well at all.

		On systems with OHCI controllers, the kernel OHCI code appears to have
		power on problems with some chipsets. If you are having problems
		connecting to your RIO 500, try turning it on first and then plugging it
		into the USB cable.

		Contact information:
		--------------------

		The main page for the project is hosted at sourceforge.net in the following
		URL: <http://rio500.sourceforge.net>. You can also go to the project's
		sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
		There is also a mailing list: rio500-users@lists.sourceforge.net

		Authors:
		-------

		Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
		Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
		things work there. Bruce Tenison <btenison@dibbs.net> is adding support
		for .fon files and also does testing. The program will mostly sure be
		re-written and Pete Ikusz along with the rest will re-design it. I would
		also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
		with some important information regarding the communication with the Rio.

		ADDITIONAL INFORMATION and Userspace tools

		http://rio500.sourceforge.net/


		REQUIREMENTS

		A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
		(Compaq and others) hardware port should work.

		A Linux development kernel (2.3.x) with USB support enabled or a
		backported version to linux-2.2.x. See http://www.linux-usb.org for
		more information on accomplishing this.

		A Linux kernel with RIO 500 support enabled.

		'lspci' which is only needed to determine the type of USB hardware
		available in your machine.

		CONFIGURATION

		Using `lspci -v`, determine the type of USB hardware available.

		If you see something like:

		USB Controller: ......
		Flags: .....
		I/O ports at ....

		Then you have a UHCI based controller.

		If you see something like:

		USB Controller: .....
		Flags: ....
		Memory at .....

		Then you have a OHCI based controller.

		Using `make menuconfig` or your preferred method for configuring the
		kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
		hardware (determined from the steps above), 'USB Diamond Rio500 support', and
		'Preliminary USB device filesystem'. Compile and install the modules
		(you may need to execute `depmod -a` to update the module
		dependencies).

		Add a device for the USB rio500:
		`mknod /dev/usb/rio500 c 180 64`

		Set appropriate permissions for /dev/usb/rio500 (don't forget about
		group and world permissions). Both read and write permissions are
		required for proper operation.

		Load the appropriate modules (if compiled as modules):

		OHCI:
		modprobe usbcore
		modprobe usb-ohci
		modprobe rio500

		UHCI:
		modprobe usbcore
		modprobe usb-uhci (or uhci)
		modprobe rio500

		That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
		be able to access the rio500.

		BUGS

		If you encounter any problems feel free to drop me an email.

		Bruce Tenison
		btenison@dibbs.net

MAINTAINERS

+0 −7

Original line number	Diff line number	Diff line
		@@ -12486,13 +12486,6 @@ W: http://www.linux-usb.org/usbnet
		S: Maintained
		F: drivers/net/usb/dm9601.c

		USB DIAMOND RIO500 DRIVER
		M: Cesar Miquel <miquel@df.uba.ar>
		L: rio500-users@lists.sourceforge.net
		W: http://rio500.sourceforge.net
		S: Maintained
		F: drivers/usb/misc/rio500*

		USB EHCI DRIVER
		M: Alan Stern <stern@rowland.harvard.edu>
		L: linux-usb@vger.kernel.org

Makefile

+1 −1

Original line number	Diff line number	Diff line
		VERSION = 4
		PATCHLEVEL = 9
		SUBLEVEL = 196
		SUBLEVEL = 197
		EXTRAVERSION =
		NAME = Roaring Lionus

arch/arm/configs/badge4_defconfig

+0 −1

Original line number	Diff line number	Diff line
		@@ -97,7 +97,6 @@ CONFIG_USB_SERIAL_PL2303=m
		CONFIG_USB_SERIAL_CYBERJACK=m
		CONFIG_USB_SERIAL_XIRCOM=m
		CONFIG_USB_SERIAL_OMNINET=m
		CONFIG_USB_RIO500=m
		CONFIG_EXT2_FS=m
		CONFIG_EXT3_FS=m
		CONFIG_MSDOS_FS=y

arch/arm/configs/corgi_defconfig

+0 −1

Original line number	Diff line number	Diff line
		@@ -207,7 +207,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
		CONFIG_USB_SERIAL_OMNINET=m
		CONFIG_USB_EMI62=m
		CONFIG_USB_EMI26=m
		CONFIG_USB_RIO500=m
		CONFIG_USB_LEGOTOWER=m
		CONFIG_USB_LCD=m
		CONFIG_USB_LED=m