graphics: update raw10 to allow padding between rows

     *

     * This format is exposed outside of the camera HAL to applications.

     *

     * RAW10 is a single-channel, 10-bit per pixel, densely packed, unprocessed

     * format, representing raw Bayer-pattern images coming from an image sensor.

     * RAW10 is a single-channel, 10-bit per pixel, densely packed in each row,

     * unprocessed format, usually representing raw Bayer-pattern images coming from

     * an image sensor.

     *

     * In an image buffer with this format, starting from the first pixel, each 4

     * consecutive pixels are packed into 5 bytes (40 bits). Each one of the first

     * 4 bytes contains the top 8 bits of each pixel, The fifth byte contains the

     * 2 least significant bits of the 4 pixels, the exact layout data for each 4

     * consecutive pixels is illustrated below (Pi[j] stands for the jth bit of

     * the ith pixel):

     * In an image buffer with this format, starting from the first pixel of each

     * row, each 4 consecutive pixels are packed into 5 bytes (40 bits). Each one

     * of the first 4 bytes contains the top 8 bits of each pixel, The fifth byte

     * contains the 2 least significant bits of the 4 pixels, the exact layout data

     * for each 4 consecutive pixels is illustrated below (Pi[j] stands for the jth

     * bit of the ith pixel):

     *

     *          bit 7                                     bit 0

     *          =====|=====|=====|=====|=====|=====|=====|=====|

     * This format assumes

     * - a width multiple of 4 pixels

     * - an even height

     * - a horizontal stride equal to the width

     * - a vertical stride equal to the height

     * - strides are specified in pixels, not in bytes

     * - strides are specified in bytes, not in pixels

     *

     *   size = stride * height

     *

     *   size = stride * height * 10 / 8

     * When stride is equal to width * (10 / 8), there will be no padding bytes at

     * the end of each row, the entire image data is densely packed. When stride is

     * larger than width * (10 / 8), padding bytes will be present at the end of each

     * row (including the last row).

     *

     * This format must be accepted by the gralloc module when used with the

     * following usage flags: