Merge "Remove main::shim::l2c_api header" into main am: 3598e6c355 am: fb18f55b30 (f36f477e) · Commits · e / os / android_packages_modules_Bluetooth

system/main/shim/l2c_api.h

deleted100644 → 0

+0 −457

Original line number	Diff line number	Diff line
		/*
		* Copyright 2019 The Android Open Source Project
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*/

		#pragma once

		#include <vector>

		#include "stack/include/bt_hdr.h"
		#include "stack/include/l2c_api.h"
		#include "types/ble_address_with_type.h"
		#include "types/hci_role.h"
		#include "types/raw_address.h"

		namespace bluetooth {
		namespace shim {

		/*******************************************************************************
		*
		* Function L2CA_Register
		*
		* Description Other layers call this function to register for L2CAP
		* services.
		*
		* Returns PSM to use or zero if error. Typically, the PSM returned
		* is the same as was passed in, but for an outgoing-only
		* connection to a dynamic PSM, a "virtual" PSM is returned
		* and should be used in the calls to L2CA_ConnectReq() and
		* BTM_SetSecurityLevel().
		*
		******************************************************************************/
		uint16_t L2CA_Register(uint16_t psm, const tL2CAP_APPL_INFO& p_cb_info, bool enable_snoop,
		tL2CAP_ERTM_INFO* p_ertm_info, uint16_t my_mtu, uint16_t required_remote_mtu,
		uint16_t sec_level);

		/*******************************************************************************
		*
		* Function L2CA_Deregister
		*
		* Description Other layers call this function to deregister for L2CAP
		* services.
		*
		* Returns void
		*
		******************************************************************************/
		void L2CA_Deregister(uint16_t psm);

		/*******************************************************************************
		*
		* Function L2CA_AllocateLePSM
		*
		* Description Other layers call this function to find an unused LE PSM for
		* L2CAP services.
		*
		* Returns LE_PSM to use if success. Otherwise returns 0.
		*
		******************************************************************************/
		uint16_t L2CA_AllocateLePSM(void);

		/*******************************************************************************
		*
		* Function L2CA_FreeLePSM
		*
		* Description Free an assigned LE PSM.
		*
		* Returns void
		*
		******************************************************************************/
		void L2CA_FreeLePSM(uint16_t psm);

		/*******************************************************************************
		*
		* Function L2CA_ConnectReq
		*
		* Description Higher layers call this function to create an L2CAP
		* connection.
		* Note that the connection is not established at this time,
		* but connection establishment gets started. The callback
		* will be invoked when connection establishes or fails.
		*
		* Returns the CID of the connection, or 0 if it failed to start
		*
		******************************************************************************/
		uint16_t L2CA_ConnectReq(uint16_t psm, const RawAddress& p_bd_addr);

		/*******************************************************************************
		*
		* Function L2CA_RegisterLECoc
		*
		* Description Other layers call this function to register for L2CAP
		* Connection Oriented Channel.
		*
		* Returns PSM to use or zero if error. Typically, the PSM returned
		* is the same as was passed in, but for an outgoing-only
		* connection to a dynamic PSM, a "virtual" PSM is returned
		* and should be used in the calls to L2CA_ConnectLECocReq()
		* and BTM_SetSecurityLevel().
		*
		******************************************************************************/
		uint16_t L2CA_RegisterLECoc(uint16_t psm, const tL2CAP_APPL_INFO& p_cb_info, uint16_t sec_level,
		tL2CAP_LE_CFG_INFO cfg);

		/*******************************************************************************
		*
		* Function L2CA_DeregisterLECoc
		*
		* Description Other layers call this function to deregister for L2CAP
		* Connection Oriented Channel.
		*
		* Returns void
		*
		******************************************************************************/
		void L2CA_DeregisterLECoc(uint16_t psm);

		/*******************************************************************************
		*
		* Function L2CA_ConnectLECocReq
		*
		* Description Higher layers call this function to create an L2CAP LE COC.
		* Note that the connection is not established at this time,
		* but connection establishment gets started. The callback
		* will be invoked when connection establishes or fails.
		*
		* Returns the CID of the connection, or 0 if it failed to start
		*
		******************************************************************************/
		uint16_t L2CA_ConnectLECocReq(uint16_t psm, const RawAddress& p_bd_addr, tL2CAP_LE_CFG_INFO* p_cfg);

		/*******************************************************************************
		*
		* Function L2CA_GetPeerLECocConfig
		*
		* Description Get peers configuration for LE Connection Oriented Channel.
		*
		* Return value: true if peer is connected
		*
		******************************************************************************/
		bool L2CA_GetPeerLECocConfig(uint16_t lcid, tL2CAP_LE_CFG_INFO* peer_cfg);

		/*******************************************************************************
		*
		* Function L2CA_ReconfigCreditBasedConnsReq
		*
		* Description Start reconfigure procedure on Credit Based Connection Oriented
		* Channels.
		*
		* Return value: true if peer is connected
		*
		******************************************************************************/

		bool L2CA_ReconfigCreditBasedConnsReq(const RawAddress& bd_addr, std::vector<uint16_t>& lcids,
		tL2CAP_LE_CFG_INFO* p_cfg);

		/*******************************************************************************
		*
		* Function L2CA_ConnectCreditBasedReq
		*
		* Description With this function L2CAP will initiate setup of up to 5 credit
		* based connections for given psm using provided configuration.
		* L2CAP will notify user on the connection result, by calling
		* pL2CA_CreditBasedConnectCfm_Cb for each cid with a result.
		*
		* Return value: vector of allocated local cids for the connection
		*
		******************************************************************************/

		extern std::vector<uint16_t> L2CA_ConnectCreditBasedReq(uint16_t psm, const RawAddress& p_bd_addr,
		tL2CAP_LE_CFG_INFO* p_cfg);

		/*******************************************************************************
		*
		* Function L2CA_ConnectCreditBasedRsp
		*
		* Description Response for the pL2CA_CreditBasedConnectInd_Cb which is the
		* indication for peer requesting credit based connection.
		*
		* Return value: true if peer is connected
		*
		******************************************************************************/

		bool L2CA_ConnectCreditBasedRsp(const RawAddress& p_bd_addr, uint8_t id,
		std::vector<uint16_t>& accepted_lcids, uint16_t result,
		tL2CAP_LE_CFG_INFO* p_cfg);

		/*******************************************************************************
		*
		* Function L2CA_DisconnectReq
		*
		* Description Higher layers call this function to disconnect a channel.
		*
		* Returns true if disconnect sent, else false
		*
		******************************************************************************/
		bool L2CA_DisconnectReq(uint16_t cid);

		bool L2CA_DisconnectLECocReq(uint16_t cid);

		/*******************************************************************************
		*
		* Function L2CA_DataWrite
		*
		* Description Higher layers call this function to write data.
		*
		* Returns tL2CAP_DW_RESULT::SUCCESS, if data accepted, else
		* false
		* tL2CAP_DW_RESULT::CONGESTED, if data accepted
		* and the channel is congested
		* tL2CAP_DW_RESULT::FAILED, if error
		*
		******************************************************************************/
		uint8_t L2CA_DataWrite(uint16_t cid, BT_HDR* p_data);

		uint8_t L2CA_LECocDataWrite(uint16_t cid, BT_HDR* p_data);

		/*******************************************************************************
		*
		* Function L2CA_SetIdleTimeoutByBdAddr
		*
		* Description Higher layers call this function to set the idle timeout for
		* a connection. The "idle timeout" is the amount of time that
		* a connection can remain up with no L2CAP channels on it.
		* A timeout of zero means that the connection will be torn
		* down immediately when the last channel is removed.
		* A timeout of 0xFFFF means no timeout. Values are in seconds.
		* A bd_addr is the remote BD address. If bd_addr =
		* RawAddress::kAny, then the idle timeouts for all active
		* l2cap links will be changed.
		*
		* Returns true if command succeeded, false if failed
		*
		* NOTE This timeout applies to all logical channels active on the
		* ACL link.
		******************************************************************************/
		bool L2CA_SetIdleTimeoutByBdAddr(const RawAddress& bd_addr, uint16_t timeout,
		tBT_TRANSPORT transport);

		/*******************************************************************************
		*
		* Function L2CA_FlushChannel
		*
		* Description This function flushes none, some or all buffers queued up
		* for xmission for a particular CID. If called with
		* L2CAP_FLUSH_CHANS_GET (0), it simply returns the number
		* of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff)
		* flushes all buffers. All other values specifies the maximum
		* buffers to flush.
		*
		* Returns Number of buffers left queued for that CID
		*
		******************************************************************************/
		uint16_t L2CA_FlushChannel(uint16_t lcid, uint16_t num_to_flush);

		/*******************************************************************************
		*
		* Function L2CA_SetAclPriority
		*
		* Description Sets the transmission priority for an ACL channel.
		* (For initial implementation only two values are valid.
		* L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
		*
		* Returns true if a valid channel, else false
		*
		******************************************************************************/
		bool L2CA_SetAclPriority(const RawAddress& bd_addr, tL2CAP_PRIORITY priority);

		/*******************************************************************************
		*
		* Function L2CA_SetTxPriority
		*
		* Description Sets the transmission priority for a channel. (FCR Mode)
		*
		* Returns true if a valid channel, else false
		*
		******************************************************************************/
		bool L2CA_SetTxPriority(uint16_t cid, tL2CAP_CHNL_PRIORITY priority);

		/*******************************************************************************
		*
		* Function L2CA_SetChnlFlushability
		*
		* Description Higher layers call this function to set a channels
		* flushability flags
		*
		* Returns true if CID found, else false
		*
		******************************************************************************/
		bool L2CA_SetChnlFlushability(uint16_t cid, bool is_flushable);

		/*******************************************************************************
		*
		* Function L2CA_GetPeerFeatures
		*
		* Description Get a peers features and fixed channel map
		*
		* Parameters: BD address of the peer
		* Pointers to features and channel mask storage area
		*
		* Return value: true if peer is connected
		*
		******************************************************************************/
		bool L2CA_GetPeerFeatures(const RawAddress& bd_addr, uint32_t* p_ext_feat, uint8_t* p_chnl_mask);

		/*******************************************************************************
		*
		* Function L2CA_RegisterFixedChannel
		*
		* Description Register a fixed channel.
		*
		* Parameters: Fixed Channel #
		* Channel Callbacks and config
		*
		* Return value: true if registered OK
		*
		******************************************************************************/
		bool L2CA_RegisterFixedChannel(uint16_t fixed_cid, tL2CAP_FIXED_CHNL_REG* p_freg);

		/*******************************************************************************
		*
		* Function L2CA_ConnectFixedChnl
		*
		* Description Connect an fixed signalling channel to a remote device.
		*
		* Parameters: Fixed CID
		* BD Address of remote
		*
		* Return value: true if connection started
		*
		******************************************************************************/
		bool L2CA_ConnectFixedChnl(uint16_t fixed_cid, const RawAddress& bd_addr);

		/*******************************************************************************
		*
		* Function L2CA_SendFixedChnlData
		*
		* Description Write data on a fixed signalling channel.
		*
		* Parameters: Fixed CID
		* BD Address of remote
		* Pointer to buffer of type BT_HDR
		*
		* Return value tL2CAP_DW_RESULT::SUCCESS, if data accepted
		* tL2CAP_DW_RESULT::FAILED, if error
		*
		******************************************************************************/
		uint16_t L2CA_SendFixedChnlData(uint16_t fixed_cid, const RawAddress& rem_bda, BT_HDR* p_buf);

		/*******************************************************************************
		*
		* Function L2CA_RemoveFixedChnl
		*
		* Description Remove a fixed channel to a remote device.
		*
		* Parameters: Fixed CID
		* BD Address of remote
		*
		* Return value: true if channel removed or marked for removal
		*
		******************************************************************************/
		bool L2CA_RemoveFixedChnl(uint16_t fixed_cid, const RawAddress& rem_bda);

		uint16_t L2CA_GetLeHandle(const RawAddress& rem_bda);
		hci_role_t L2CA_GetBleConnRole(const RawAddress& bd_addr);

		void L2CA_LeConnectionUpdate(const RawAddress& rem_bda, uint16_t min_int, uint16_t max_int,
		uint16_t latency, uint16_t timeout, uint16_t min_ce_len,
		uint16_t max_ce_len);

		/*******************************************************************************
		*
		* Function L2CA_SetLeGattTimeout
		*
		* Description Higher layers call this function to set the idle timeout for
		* a fixed channel. The "idle timeout" is the amount of time
		* that a connection can remain up with no L2CAP channels on
		* it. A timeout of zero means that the connection will be torn
		* down immediately when the last channel is removed.
		* A timeout of 0xFFFF means no timeout. Values are in seconds.
		* A bd_addr is the remote BD address. If bd_addr =
		* RawAddress::kAny, then the idle timeouts for all active
		* l2cap links will be changed.
		*
		* Returns true if command succeeded, false if failed
		*
		******************************************************************************/
		bool L2CA_SetLeGattTimeout(const RawAddress& rem_bda, uint16_t idle_tout);

		bool L2CA_MarkLeLinkAsActive(const RawAddress& rem_bda);

		bool L2CA_UpdateBleConnParams(const RawAddress& rem_bda, uint16_t min_int, uint16_t max_int,
		uint16_t latency, uint16_t timeout, uint16_t min_ce_len,
		uint16_t max_ce_len);
		/* When called with lock=true, LE connection parameters will be locked on
		* fastest value, and we won't accept request to change it from remote. When
		* called with lock=false, parameters are relaxed.
		*/
		void L2CA_LockBleConnParamsForServiceDiscovery(const RawAddress& rem_bda, bool lock);

		/* When called with lock=true, LE connection parameters will be locked on
		* fastest value, and we won't accept request to change it from remote. When
		* called with lock=false, parameters are relaxed.
		*/
		void L2CA_LockBleConnParamsForProfileConnection(const RawAddress& rem_bda, bool lock);

		/*******************************************************************************
		*
		* Function L2CA_GetBleConnRole
		*
		* Description This function returns the connection role.
		*
		* Returns link role.
		*
		******************************************************************************/
		hci_role_t L2CA_GetBleConnRole(const RawAddress& bd_addr);

		/**
		* Check whether an ACL or LE link to the remote device is established
		*/
		bool L2CA_IsLinkEstablished(const RawAddress& bd_addr, tBT_TRANSPORT transport);

		void L2CA_ConnectForSecurity(const RawAddress& bd_addr);

		// Set bonding state to acquire/release link refcount
		void L2CA_SetBondingState(const RawAddress& p_bd_addr, bool is_bonding);

		void L2CA_SwitchRoleToCentral(const RawAddress& addr);

		bool L2CA_ReadRemoteVersion(const RawAddress& addr, uint8_t* lmp_version, uint16_t* manufacturer,
		uint16_t* lmp_sub_version);

		uint8_t* L2CA_ReadRemoteFeatures(const RawAddress& addr);

		void L2CA_DisconnectLink(const RawAddress& remote);

		uint16_t L2CA_GetNumLinks();

		bool L2CA_IsLeLink(uint16_t acl_handle);

		void L2CA_ReadConnectionAddr(const RawAddress& pseudo_addr, RawAddress& conn_addr,
		tBLE_ADDR_TYPE* p_addr_type);

		bool L2CA_ReadRemoteConnectionAddr(const RawAddress& pseudo_addr, RawAddress& conn_addr,
		tBLE_ADDR_TYPE* p_addr_type);

		} // namespace shim
		} // namespace bluetooth