Loading system/stack/Android.bp +53 −1 Original line number Original line Diff line number Diff line Loading @@ -197,7 +197,9 @@ cc_test { "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system/internal_include", "packages/modules/Bluetooth/system/internal_include", ], ], srcs: ["test/stack_a2dp_test.cc"], srcs: [ "test/stack_a2dp_test.cc", ], shared_libs: [ shared_libs: [ "libhidlbase", "libhidlbase", "liblog", "liblog", Loading @@ -221,6 +223,56 @@ cc_test { ], ], } } cc_test { name: "net_test_stack_rfcomm", defaults: ["fluoride_defaults"], host_supported: true, local_include_dirs: [ "include", "btm", "l2cap", "smp", "rfcomm", "test/common", ], include_dirs: [ "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system/internal_include", "packages/modules/Bluetooth/system/btcore/include", "packages/modules/Bluetooth/system/hci/include", "packages/modules/Bluetooth/system/utils/include", ], srcs: [ "rfcomm/port_api.cc", "rfcomm/port_rfc.cc", "rfcomm/port_utils.cc", "rfcomm/rfc_l2cap_if.cc", "rfcomm/rfc_mx_fsm.cc", "rfcomm/rfc_port_fsm.cc", "rfcomm/rfc_port_if.cc", "rfcomm/rfc_ts_frames.cc", "rfcomm/rfc_utils.cc", "test/common/mock_btm_layer.cc", "test/common/mock_btu_layer.cc", "test/common/mock_l2cap_layer.cc", "test/common/stack_test_packet_utils.cc", "test/rfcomm/stack_rfcomm_test.cc", "test/rfcomm/stack_rfcomm_test_main.cc", "test/rfcomm/stack_rfcomm_test_utils.cc", "test/rfcomm/stack_rfcomm_test_utils_test.cc", ], shared_libs: [ "libcutils", "libprotobuf-cpp-lite", ], static_libs: [ "liblog", "libgmock", "libosi", "libbt-protos-lite", ], } // Bluetooth stack smp unit tests for target // Bluetooth stack smp unit tests for target // ======================================================== // ======================================================== cc_test { cc_test { Loading system/stack/test/common/mock_btm_layer.cc 0 → 100644 +45 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include "mock_btm_layer.h" static bluetooth::manager::MockBtmSecurityInternalInterface* btm_security_internal_interface = nullptr; void bluetooth::manager::SetMockSecurityInternalInterface( MockBtmSecurityInternalInterface* mock_btm_security_internal_interface) { btm_security_internal_interface = mock_btm_security_internal_interface; } void btm_sec_abort_access_req(const RawAddress& bd_addr) { btm_security_internal_interface->AbortAccessRequest(bd_addr); } tBTM_STATUS btm_sec_mx_access_request(const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) { return btm_security_internal_interface->MultiplexingProtocolAccessRequest( bd_addr, psm, is_originator, mx_proto_id, mx_chan_id, p_callback, p_ref_data); } uint16_t btm_get_max_packet_size(const RawAddress& addr) { return RFCOMM_DEFAULT_MTU; } No newline at end of file system/stack/test/common/mock_btm_layer.h 0 → 100644 +57 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #pragma once #include <gmock/gmock.h> #include "btm_int.h" namespace bluetooth { namespace manager { class BtmSecurityInternalInterface { public: virtual void AbortAccessRequest(const RawAddress& bd_addr) = 0; virtual tBTM_STATUS MultiplexingProtocolAccessRequest( const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) = 0; virtual ~BtmSecurityInternalInterface() = default; }; class MockBtmSecurityInternalInterface : public BtmSecurityInternalInterface { public: MOCK_METHOD1(AbortAccessRequest, void(const RawAddress& bd_addr)); MOCK_METHOD7(MultiplexingProtocolAccessRequest, tBTM_STATUS(const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data)); }; /** * Set the {@link MockBtmSecurityInternalInterface} for testing * * @param mock_btm_security_internal_interface pointer to mock btm security * internal interface, could be null */ void SetMockSecurityInternalInterface( MockBtmSecurityInternalInterface* mock_btm_security_internal_interface); } // namespace manager } // namespace bluetooth No newline at end of file system/stack/test/common/mock_btu_layer.cc 0 → 100644 +21 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include <base/message_loop/message_loop.h> base::MessageLoop* get_message_loop() { return nullptr; } No newline at end of file system/stack/test/common/mock_l2cap_layer.cc 0 → 100644 +59 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include "mock_l2cap_layer.h" static bluetooth::l2cap::MockL2capInterface* l2cap_interface = nullptr; void bluetooth::l2cap::SetMockInterface( MockL2capInterface* mock_l2cap_interface) { l2cap_interface = mock_l2cap_interface; } uint16_t L2CA_Register(uint16_t psm, tL2CAP_APPL_INFO* p_cb_info) { VLOG(1) << __func__ << ": psm=" << psm << ", p_cb_info=" << p_cb_info; return l2cap_interface->Register(psm, p_cb_info); } uint16_t L2CA_ConnectReq(uint16_t psm, const RawAddress& bd_addr) { return l2cap_interface->ConnectRequest(psm, bd_addr); } bool L2CA_ConnectRsp(const RawAddress& bd_addr, uint8_t id, uint16_t lcid, uint16_t result, uint16_t status) { return l2cap_interface->ConnectResponse(bd_addr, id, lcid, result, status); } bool L2CA_DisconnectReq(uint16_t cid) { return l2cap_interface->DisconnectRequest(cid); } bool L2CA_DisconnectRsp(uint16_t cid) { return l2cap_interface->DisconnectResponse(cid); } bool L2CA_ConfigReq(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) { return l2cap_interface->ConfigRequest(cid, p_cfg); } bool L2CA_ConfigRsp(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) { return l2cap_interface->ConfigResponse(cid, p_cfg); } uint8_t L2CA_DataWrite(uint16_t cid, BT_HDR* p_data) { return l2cap_interface->DataWrite(cid, p_data); } Loading
system/stack/Android.bp +53 −1 Original line number Original line Diff line number Diff line Loading @@ -197,7 +197,9 @@ cc_test { "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system/internal_include", "packages/modules/Bluetooth/system/internal_include", ], ], srcs: ["test/stack_a2dp_test.cc"], srcs: [ "test/stack_a2dp_test.cc", ], shared_libs: [ shared_libs: [ "libhidlbase", "libhidlbase", "liblog", "liblog", Loading @@ -221,6 +223,56 @@ cc_test { ], ], } } cc_test { name: "net_test_stack_rfcomm", defaults: ["fluoride_defaults"], host_supported: true, local_include_dirs: [ "include", "btm", "l2cap", "smp", "rfcomm", "test/common", ], include_dirs: [ "packages/modules/Bluetooth/system", "packages/modules/Bluetooth/system/internal_include", "packages/modules/Bluetooth/system/btcore/include", "packages/modules/Bluetooth/system/hci/include", "packages/modules/Bluetooth/system/utils/include", ], srcs: [ "rfcomm/port_api.cc", "rfcomm/port_rfc.cc", "rfcomm/port_utils.cc", "rfcomm/rfc_l2cap_if.cc", "rfcomm/rfc_mx_fsm.cc", "rfcomm/rfc_port_fsm.cc", "rfcomm/rfc_port_if.cc", "rfcomm/rfc_ts_frames.cc", "rfcomm/rfc_utils.cc", "test/common/mock_btm_layer.cc", "test/common/mock_btu_layer.cc", "test/common/mock_l2cap_layer.cc", "test/common/stack_test_packet_utils.cc", "test/rfcomm/stack_rfcomm_test.cc", "test/rfcomm/stack_rfcomm_test_main.cc", "test/rfcomm/stack_rfcomm_test_utils.cc", "test/rfcomm/stack_rfcomm_test_utils_test.cc", ], shared_libs: [ "libcutils", "libprotobuf-cpp-lite", ], static_libs: [ "liblog", "libgmock", "libosi", "libbt-protos-lite", ], } // Bluetooth stack smp unit tests for target // Bluetooth stack smp unit tests for target // ======================================================== // ======================================================== cc_test { cc_test { Loading
system/stack/test/common/mock_btm_layer.cc 0 → 100644 +45 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include "mock_btm_layer.h" static bluetooth::manager::MockBtmSecurityInternalInterface* btm_security_internal_interface = nullptr; void bluetooth::manager::SetMockSecurityInternalInterface( MockBtmSecurityInternalInterface* mock_btm_security_internal_interface) { btm_security_internal_interface = mock_btm_security_internal_interface; } void btm_sec_abort_access_req(const RawAddress& bd_addr) { btm_security_internal_interface->AbortAccessRequest(bd_addr); } tBTM_STATUS btm_sec_mx_access_request(const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) { return btm_security_internal_interface->MultiplexingProtocolAccessRequest( bd_addr, psm, is_originator, mx_proto_id, mx_chan_id, p_callback, p_ref_data); } uint16_t btm_get_max_packet_size(const RawAddress& addr) { return RFCOMM_DEFAULT_MTU; } No newline at end of file
system/stack/test/common/mock_btm_layer.h 0 → 100644 +57 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #pragma once #include <gmock/gmock.h> #include "btm_int.h" namespace bluetooth { namespace manager { class BtmSecurityInternalInterface { public: virtual void AbortAccessRequest(const RawAddress& bd_addr) = 0; virtual tBTM_STATUS MultiplexingProtocolAccessRequest( const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) = 0; virtual ~BtmSecurityInternalInterface() = default; }; class MockBtmSecurityInternalInterface : public BtmSecurityInternalInterface { public: MOCK_METHOD1(AbortAccessRequest, void(const RawAddress& bd_addr)); MOCK_METHOD7(MultiplexingProtocolAccessRequest, tBTM_STATUS(const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data)); }; /** * Set the {@link MockBtmSecurityInternalInterface} for testing * * @param mock_btm_security_internal_interface pointer to mock btm security * internal interface, could be null */ void SetMockSecurityInternalInterface( MockBtmSecurityInternalInterface* mock_btm_security_internal_interface); } // namespace manager } // namespace bluetooth No newline at end of file
system/stack/test/common/mock_btu_layer.cc 0 → 100644 +21 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include <base/message_loop/message_loop.h> base::MessageLoop* get_message_loop() { return nullptr; } No newline at end of file
system/stack/test/common/mock_l2cap_layer.cc 0 → 100644 +59 −0 Original line number Original line Diff line number Diff line /****************************************************************************** * * Copyright 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #include "mock_l2cap_layer.h" static bluetooth::l2cap::MockL2capInterface* l2cap_interface = nullptr; void bluetooth::l2cap::SetMockInterface( MockL2capInterface* mock_l2cap_interface) { l2cap_interface = mock_l2cap_interface; } uint16_t L2CA_Register(uint16_t psm, tL2CAP_APPL_INFO* p_cb_info) { VLOG(1) << __func__ << ": psm=" << psm << ", p_cb_info=" << p_cb_info; return l2cap_interface->Register(psm, p_cb_info); } uint16_t L2CA_ConnectReq(uint16_t psm, const RawAddress& bd_addr) { return l2cap_interface->ConnectRequest(psm, bd_addr); } bool L2CA_ConnectRsp(const RawAddress& bd_addr, uint8_t id, uint16_t lcid, uint16_t result, uint16_t status) { return l2cap_interface->ConnectResponse(bd_addr, id, lcid, result, status); } bool L2CA_DisconnectReq(uint16_t cid) { return l2cap_interface->DisconnectRequest(cid); } bool L2CA_DisconnectRsp(uint16_t cid) { return l2cap_interface->DisconnectResponse(cid); } bool L2CA_ConfigReq(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) { return l2cap_interface->ConfigRequest(cid, p_cfg); } bool L2CA_ConfigRsp(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) { return l2cap_interface->ConfigResponse(cid, p_cfg); } uint8_t L2CA_DataWrite(uint16_t cid, BT_HDR* p_data) { return l2cap_interface->DataWrite(cid, p_data); }
