Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b1dd42b0 authored by Chris Manton's avatar Chris Manton Committed by Automerger Merge Worker
Browse files

Remove unused code am: 8723d3dc am: 3c65a5ce 

Original change: https://android-review.googlesource.com/c/platform/system/bt/+/1459358

Change-Id: I4dc87e57409026c9745552be00bd0875484033b9
parents 37f5d8ba 3c65a5ce

system/bta/dm/bta_dm_act.cc

+0 −41
Original line number Diff line number Diff line
@@ -191,47 +191,6 @@ const uint16_t bta_service_id_to_uuid_lkup_tbl[BTA_MAX_SERVICE_ID] = { 
    UUID_PROTOCOL_ATT                     /* BTA_GATT_SERVICE_ID */

};



/*

 * NOTE : The number of element in bta_service_id_to_btm_srv_id_lkup_tbl should

 * be matching with the value BTA_MAX_SERVICE_ID in bta_api.h

 *

 * i.e., If you add new Service ID for BTA, the correct security ID of the new

 * service from Security service definitions (btm_api.h) should be added to

 * this lookup table.

 */

const uint32_t bta_service_id_to_btm_srv_id_lkup_tbl[BTA_MAX_SERVICE_ID] = {

    0,                             /* Reserved */

    BTM_SEC_SERVICE_SERIAL_PORT,   /* BTA_SPP_SERVICE_ID */

    BTM_SEC_SERVICE_DUN,           /* BTA_DUN_SERVICE_ID */

    BTM_SEC_SERVICE_AVDTP,         /* BTA_AUDIO_SOURCE_SERVICE_ID */

    BTM_SEC_SERVICE_LAN_ACCESS,    /* BTA_LAP_SERVICE_ID */

    BTM_SEC_SERVICE_HEADSET_AG,    /* BTA_HSP_SERVICE_ID */

    BTM_SEC_SERVICE_AG_HANDSFREE,  /* BTA_HFP_SERVICE_ID */

    BTM_SEC_SERVICE_OBEX,          /* BTA_OPP_SERVICE_ID */

    BTM_SEC_SERVICE_OBEX_FTP,      /* BTA_FTP_SERVICE_ID */

    BTM_SEC_SERVICE_CORDLESS,      /* BTA_CTP_SERVICE_ID */

    BTM_SEC_SERVICE_INTERCOM,      /* BTA_ICP_SERVICE_ID */

    BTM_SEC_SERVICE_IRMC_SYNC,     /* BTA_SYNC_SERVICE_ID */

    BTM_SEC_SERVICE_BPP_JOB,       /* BTA_BPP_SERVICE_ID */

    BTM_SEC_SERVICE_BIP,           /* BTA_BIP_SERVICE_ID */

    BTM_SEC_SERVICE_BNEP_PANU,     /* BTA_PANU_SERVICE_ID */

    BTM_SEC_SERVICE_BNEP_NAP,      /* BTA_NAP_SERVICE_ID */

    BTM_SEC_SERVICE_BNEP_GN,       /* BTA_GN_SERVICE_ID */

    BTM_SEC_SERVICE_SAP,           /* BTA_SAP_SERVICE_ID */

    BTM_SEC_SERVICE_AVDTP,         /* BTA_A2DP_SERVICE_ID */

    BTM_SEC_SERVICE_AVCTP,         /* BTA_AVRCP_SERVICE_ID */

    BTM_SEC_SERVICE_HIDH_SEC_CTRL, /* BTA_HID_SERVICE_ID */

    BTM_SEC_SERVICE_AVDTP,         /* BTA_VDP_SERVICE_ID */

    BTM_SEC_SERVICE_PBAP,          /* BTA_PBAP_SERVICE_ID */

    BTM_SEC_SERVICE_HEADSET,       /* BTA_HSP_HS_SERVICE_ID */

    BTM_SEC_SERVICE_HF_HANDSFREE,  /* BTA_HFP_HS_SERVICE_ID */

    BTM_SEC_SERVICE_MAP,           /* BTA_MAP_SERVICE_ID */

    BTM_SEC_SERVICE_MAP,           /* BTA_MN_SERVICE_ID */

    BTM_SEC_SERVICE_HDP_SNK,       /* BTA_HDP_SERVICE_ID */

    BTM_SEC_SERVICE_PBAP,          /* BTA_PCE_SERVICE_ID */

    BTM_SEC_SERVICE_ATT            /* BTA_GATT_SERVICE_ID */

};



/* bta security callback */

const tBTM_APPL_INFO bta_security = {&bta_dm_pin_cback,

                                     &bta_dm_new_link_key_cback,

system/bta/include/bta_api.h

+0 −5
Original line number Diff line number Diff line
@@ -49,11 +49,6 @@ typedef uint8_t tBTA_STATUS; 


/*

 * Service ID

 *

 * NOTES: When you add a new Service ID for BTA AND require to change the value

 * of BTA_MAX_SERVICE_ID, make sure that the correct security ID of the new

 * service from Security service definitions (btm_api.h) should be added to

 * bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.cc

 */



#define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */

system/stack/btm/btm_sco.cc

+0 −25
Original line number Diff line number Diff line
@@ -158,31 +158,6 @@ static void btm_esco_conn_rsp(uint16_t sco_inx, uint8_t hci_status, 
      *p_setup = btm_cb.sco_cb.def_esco_parms;

    }



    uint16_t temp_packet_types =

        (p_setup->packet_types & BTM_SCO_SUPPORTED_PKTS_MASK &

         btm_cb.btm_sco_pkt_types_supported);



    /* Make sure at least one eSCO packet type is sent, else might confuse peer

     */

    /* Taking this out to confirm with BQB tests

    ** Real application would like to include this though, as many devices

    ** do not retry with SCO only if an eSCO connection fails.

    if (!(temp_packet_types & BTM_ESCO_LINK_ONLY_MASK))

    {

        temp_packet_types |= BTM_SCO_PKT_TYPES_MASK_EV3;

    }

    */

    /* If SCO request, remove eSCO packet types (conformance) */

    if (p_sco->esco.data.link_type == BTM_LINK_TYPE_SCO) {

      temp_packet_types &= BTM_SCO_LINK_ONLY_MASK;

      temp_packet_types |= BTM_SCO_EXCEPTION_PKTS_MASK;

    } else {

      /* OR in any exception packet types */

      temp_packet_types |=

          ((p_setup->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) |

           (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK));

    }



    /* Use Enhanced Synchronous commands if supported */

    if (controller_get_interface()

            ->supports_enhanced_setup_synchronous_connection()) {

system/stack/hid/hidh_conn.cc

+0 −8
Original line number Diff line number Diff line
@@ -811,9 +811,6 @@ tHID_STATUS hidh_conn_snd_data(uint8_t dhandle, uint8_t trans_type, 
 *

 ******************************************************************************/

tHID_STATUS hidh_conn_initiate(uint8_t dhandle) {

  uint8_t service_id = BTM_SEC_SERVICE_HIDH_NOSEC_CTRL;

  uint32_t mx_chan_id = HID_NOSEC_CHN;



  tHID_HOST_DEV_CTB* p_dev = &hh_cb.devices[dhandle];



  if (p_dev->conn.conn_state != HID_CONN_STATE_UNUSED)
@@ -828,11 +825,6 @@ tHID_STATUS hidh_conn_initiate(uint8_t dhandle) { 
  /* We are the originator of this connection */

  p_dev->conn.conn_flags = HID_CONN_FLAGS_IS_ORIG;



  if (p_dev->attr_mask & HID_SEC_REQUIRED) {

    service_id = BTM_SEC_SERVICE_HIDH_SEC_CTRL;

    mx_chan_id = HID_SEC_CHN;

  }



  /* Check if L2CAP started the connection process */

  p_dev->conn.ctrl_cid = L2CA_ConnectReq2(

      HID_PSM_CONTROL, p_dev->addr, BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);

system/stack/include/btm_api_types.h

+0 −34
Original line number Diff line number Diff line
@@ -531,44 +531,10 @@ typedef uint8_t tBTM_LINK_KEY_TYPE; 
#define BTM_SEC_PROTO_HID 6 /* HID      */

#define BTM_SEC_PROTO_AVDT 7



/* Security service definitions (BTM_SetSecurityLevel)

 * Used for Authorization APIs

*/

#define BTM_SEC_SERVICE_SDP_SERVER 0

#define BTM_SEC_SERVICE_SERIAL_PORT 1

#define BTM_SEC_SERVICE_LAN_ACCESS 2

#define BTM_SEC_SERVICE_DUN 3

#define BTM_SEC_SERVICE_IRMC_SYNC 4

#define BTM_SEC_SERVICE_OBEX 6

#define BTM_SEC_SERVICE_OBEX_FTP 7

#define BTM_SEC_SERVICE_HEADSET 8

#define BTM_SEC_SERVICE_CORDLESS 9

#define BTM_SEC_SERVICE_INTERCOM 10

#define BTM_SEC_SERVICE_HEADSET_AG 12

#define BTM_SEC_SERVICE_BPP_JOB 22

#define BTM_SEC_SERVICE_BNEP_PANU 25

#define BTM_SEC_SERVICE_BNEP_GN 26

#define BTM_SEC_SERVICE_BNEP_NAP 27

#define BTM_SEC_SERVICE_HF_HANDSFREE 28

#define BTM_SEC_SERVICE_AG_HANDSFREE 29



#define BTM_SEC_SERVICE_HIDH_SEC_CTRL 32

#define BTM_SEC_SERVICE_HIDH_NOSEC_CTRL 33

#define BTM_SEC_SERVICE_HIDH_INTR 34

#define BTM_SEC_SERVICE_BIP 35

#define BTM_SEC_SERVICE_AVDTP 37

#define BTM_SEC_SERVICE_AVDTP_NOSEC 38

#define BTM_SEC_SERVICE_AVCTP 39

#define BTM_SEC_SERVICE_SAP 40

#define BTM_SEC_SERVICE_PBAP 41

#define BTM_SEC_SERVICE_RFC_MUX 42

#define BTM_SEC_SERVICE_AVCTP_BROWSE 43

#define BTM_SEC_SERVICE_MAP 44

#define BTM_SEC_SERVICE_HDP_SNK 48

#define BTM_SEC_SERVICE_ATT 50

#define BTM_SEC_SERVICE_HIDD_SEC_CTRL 51

#define BTM_SEC_SERVICE_HIDD_NOSEC_CTRL 52

#define BTM_SEC_SERVICE_HIDD_INTR 53

#define BTM_SEC_SERVICE_HEARING_AID_LEFT 54

#define BTM_SEC_SERVICE_HEARING_AID_RIGHT 55