Move stack/include/hcimsgs#defs into br_edr compilation unit

#include "btm_int.h" /* Included for UIPC_* macro definitions */

#include "stack/include/acl_hci_link_interface.h"

#include "bt_target.h"

#include "bt_types.h"

#include "device/include/esco_parameters.h"

#include "hcidefs.h"

#include <base/callback_forward.h>

void bte_main_hci_send(BT_HDR* p_msg, uint16_t event);

/* Message by message.... */

#define HCIC_PARAM_SIZE_INQUIRY 5

#define HCIC_INQ_INQ_LAP_OFF 0

#define HCIC_INQ_DUR_OFF 3

#define HCIC_INQ_RSP_CNT_OFF 4

/* Inquiry */

/* Inquiry Cancel */

#define HCIC_PARAM_SIZE_INQ_CANCEL 0

/* Periodic Inquiry Mode */

#define HCIC_PARAM_SIZE_PER_INQ_MODE 9

#define HCI_PER_INQ_MAX_INTRVL_OFF 0

#define HCI_PER_INQ_MIN_INTRVL_OFF 2

#define HCI_PER_INQ_INQ_LAP_OFF 4

#define HCI_PER_INQ_DURATION_OFF 7

#define HCI_PER_INQ_RSP_CNT_OFF 8

/* Periodic Inquiry Mode */

/* Exit Periodic Inquiry Mode */

#define HCIC_PARAM_SIZE_EXIT_PER_INQ 0

/* Create Connection */

#define HCIC_PARAM_SIZE_CREATE_CONN 13

#define HCIC_CR_CONN_BD_ADDR_OFF 0

#define HCIC_CR_CONN_PKT_TYPES_OFF 6

#define HCIC_CR_CONN_REP_MODE_OFF 8

#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9

#define HCIC_CR_CONN_CLK_OFF_OFF 10

#define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12

/* Create Connection */

/* Disconnect */

#define HCIC_PARAM_SIZE_DISCONNECT 3

#define HCI_DISC_HANDLE_OFF 0

#define HCI_DISC_REASON_OFF 2

/* Disconnect */

/* Add SCO Connection */

#define HCIC_PARAM_SIZE_ADD_SCO_CONN 4

#define HCI_ADD_SCO_HANDLE_OFF 0

#define HCI_ADD_SCO_PACKET_TYPES_OFF 2

/* Add SCO Connection */

/* Create Connection Cancel */

#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6

#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0

/* Create Connection Cancel */

/* Accept Connection Request */

#define HCIC_PARAM_SIZE_ACCEPT_CONN 7

#define HCI_ACC_CONN_BD_ADDR_OFF 0

#define HCI_ACC_CONN_ROLE_OFF 6

/* Accept Connection Request */

/* Reject Connection Request */

#define HCIC_PARAM_SIZE_REJECT_CONN 7

#define HCI_REJ_CONN_BD_ADDR_OFF 0

#define HCI_REJ_CONN_REASON_OFF 6

/* Reject Connection Request */

/* Link Key Request Reply */

#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22

#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0

#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6

/* Link Key Request Reply  */

/* Link Key Request Neg Reply */

#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6

#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0

/* Link Key Request Neg Reply  */

/* PIN Code Request Reply */

#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23

#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0

#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6

#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7

/* PIN Code Request Reply  */

/* Link Key Request Neg Reply */

#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6

#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0

/* Link Key Request Neg Reply  */

/* Change Connection Type */

#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4

#define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0

#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2

/* Change Connection Type */

#define HCIC_PARAM_SIZE_CMD_HANDLE 2

#define HCI_CMD_HANDLE_HANDLE_OFF 0

/* Set Connection Encryption */

#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3

#define HCI_SET_ENCRYPT_HANDLE_OFF 0

#define HCI_SET_ENCRYPT_ENABLE_OFF 2

/* Set Connection Encryption */

/* Remote Name Request */

#define HCIC_PARAM_SIZE_RMT_NAME_REQ 10

#define HCI_RMT_NAME_BD_ADDR_OFF 0

#define HCI_RMT_NAME_REP_MODE_OFF 6

#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7

#define HCI_RMT_NAME_CLK_OFF_OFF 8

/* Remote Name Request */

/* Remote Name Request Cancel */

#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6

#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0

/* Remote Name Request Cancel */

/* Remote Extended Features */

#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3

#define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0

#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2

/* Remote Extended Features */

#define HCIC_PARAM_SIZE_SETUP_ESCO 17

#define HCI_SETUP_ESCO_HANDLE_OFF 0

#define HCI_SETUP_ESCO_TX_BW_OFF 2

#define HCI_SETUP_ESCO_RX_BW_OFF 6

#define HCI_SETUP_ESCO_MAX_LAT_OFF 10

#define HCI_SETUP_ESCO_VOICE_OFF 12

#define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14

#define HCI_SETUP_ESCO_PKT_TYPES_OFF 15

#define HCIC_PARAM_SIZE_ACCEPT_ESCO 21

#define HCI_ACCEPT_ESCO_BDADDR_OFF 0

#define HCI_ACCEPT_ESCO_TX_BW_OFF 6

#define HCI_ACCEPT_ESCO_RX_BW_OFF 10

#define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14

#define HCI_ACCEPT_ESCO_VOICE_OFF 16

#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18

#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19

#define HCIC_PARAM_SIZE_REJECT_ESCO 7

#define HCI_REJECT_ESCO_BDADDR_OFF 0

#define HCI_REJECT_ESCO_REASON_OFF 6

/* Hold Mode */

#define HCIC_PARAM_SIZE_HOLD_MODE 6

#define HCI_HOLD_MODE_HANDLE_OFF 0

#define HCI_HOLD_MODE_MAX_PER_OFF 2

#define HCI_HOLD_MODE_MIN_PER_OFF 4

/* Hold Mode */

/* Sniff Mode */

#define HCIC_PARAM_SIZE_SNIFF_MODE 10

#define HCI_SNIFF_MODE_HANDLE_OFF 0

#define HCI_SNIFF_MODE_MAX_PER_OFF 2

#define HCI_SNIFF_MODE_MIN_PER_OFF 4

#define HCI_SNIFF_MODE_ATTEMPT_OFF 6

#define HCI_SNIFF_MODE_TIMEOUT_OFF 8

/* Sniff Mode */

/* Park Mode */

#define HCIC_PARAM_SIZE_PARK_MODE 6

#define HCI_PARK_MODE_HANDLE_OFF 0

#define HCI_PARK_MODE_MAX_PER_OFF 2

#define HCI_PARK_MODE_MIN_PER_OFF 4

/* Park Mode */

/* QoS Setup */

#define HCIC_PARAM_SIZE_QOS_SETUP 20

#define HCI_QOS_HANDLE_OFF 0

#define HCI_QOS_FLAGS_OFF 2

#define HCI_QOS_SERVICE_TYPE_OFF 3

#define HCI_QOS_TOKEN_RATE_OFF 4

#define HCI_QOS_PEAK_BANDWIDTH_OFF 8

#define HCI_QOS_LATENCY_OFF 12

#define HCI_QOS_DELAY_VAR_OFF 16

/* QoS Setup */

#define HCIC_PARAM_SIZE_SWITCH_ROLE 7

#define HCI_SWITCH_BD_ADDR_OFF 0

#define HCI_SWITCH_ROLE_OFF 6

/* Switch Role Request */

/* Write Policy Settings */

#define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4

#define HCI_WRITE_POLICY_HANDLE_OFF 0

#define HCI_WRITE_POLICY_SETTINGS_OFF 2

/* Write Policy Settings */

/* Write Default Policy Settings */

#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2

#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0

/* Write Default Policy Settings */

#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8

#define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0

#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2

#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4

#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6

/* Sniff Subrating */

/* Extended Inquiry Response */

#define HCIC_PARAM_SIZE_EXT_INQ_RESP 241

#define HCIC_EXT_INQ_RESP_FEC_OFF 0

#define HCIC_EXT_INQ_RESP_RESPONSE 1

/* IO Capabilities Response */

#define HCIC_PARAM_SIZE_IO_CAP_RESP 9

#define HCI_IO_CAP_BD_ADDR_OFF 0

#define HCI_IO_CAPABILITY_OFF 6

#define HCI_IO_CAP_OOB_DATA_OFF 7

#define HCI_IO_CAP_AUTH_REQ_OFF 8

/* IO Capabilities Req Neg Reply */

#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7

#define HCI_IO_CAP_NR_BD_ADDR_OFF 0

#define HCI_IO_CAP_NR_ERR_CODE 6

/* Read Local OOB Data */

#define HCIC_PARAM_SIZE_R_LOCAL_OOB 0

#define HCIC_PARAM_SIZE_UCONF_REPLY 6

#define HCI_USER_CONF_BD_ADDR_OFF 0

#define HCIC_PARAM_SIZE_U_PKEY_REPLY 10

#define HCI_USER_PASSKEY_BD_ADDR_OFF 0

#define HCI_USER_PASSKEY_VALUE_OFF 6

#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6

#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0

/* Remote OOB Data Request Reply */

#define HCIC_PARAM_SIZE_REM_OOB_REPLY 38

#define HCI_REM_OOB_DATA_BD_ADDR_OFF 0

#define HCI_REM_OOB_DATA_C_OFF 6

#define HCI_REM_OOB_DATA_R_OFF 22

/* Remote OOB Data Request Negative Reply */

#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6

#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0

/* Read Tx Power Level */

#define HCIC_PARAM_SIZE_R_TX_POWER 0

/* Read Default Erroneous Data Reporting */

#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0

#define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3

#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7

#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0

#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6

/**** end of Simple Pairing Commands ****/

#define HCIC_PARAM_SIZE_SET_EVT_FILTER 9

#define HCI_FILT_COND_FILT_TYPE_OFF 0

#define HCI_FILT_COND_COND_TYPE_OFF 1

#define HCI_FILT_COND_FILT_OFF 2

/* Set Event Filter */

/* Delete Stored Key */

#define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7

#define HCI_DELETE_KEY_BD_ADDR_OFF 0

#define HCI_DELETE_KEY_ALL_FLAG_OFF 6

/* Delete Stored Key */

/* Change Local Name */

#define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN

#define HCI_CHANGE_NAME_NAME_OFF 0

/* Change Local Name */

#define HCIC_PARAM_SIZE_READ_CMD 0

#define HCIC_PARAM_SIZE_WRITE_PARAM1 1

#define HCIC_WRITE_PARAM1_PARAM_OFF 0

#define HCIC_PARAM_SIZE_WRITE_PARAM2 2

#define HCIC_WRITE_PARAM2_PARAM_OFF 0

#define HCIC_PARAM_SIZE_WRITE_PARAM3 3

#define HCIC_WRITE_PARAM3_PARAM_OFF 0

#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10

#define HCIC_PARAM_SIZE_ENH_SET_ESCO_CONN 59

#define HCIC_PARAM_SIZE_ENH_ACC_ESCO_CONN 63

#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4

#define HCI_SCAN_CFG_INTERVAL_OFF 0

#define HCI_SCAN_CFG_WINDOW_OFF 2

/* Write Page Scan Activity */

/* Write Inquiry Scan Activity */

#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4

#define HCI_SCAN_CFG_INTERVAL_OFF 0

#define HCI_SCAN_CFG_WINDOW_OFF 2

/* Write Inquiry Scan Activity */

/* Host Controller to Host flow control */

#define HCI_HOST_FLOW_CTRL_OFF 0

#define HCI_HOST_FLOW_CTRL_ACL_ON 1

#define HCI_HOST_FLOW_CTRL_SCO_ON 2

#define HCI_HOST_FLOW_CTRL_BOTH_ON 3

#define HCIC_PARAM_SIZE_WRITE_AUTOMATIC_FLUSH_TIMEOUT 4

#define HCI_FLUSH_TOUT_HANDLE_OFF 0

#define HCI_FLUSH_TOUT_TOUT_OFF 2

#define HCIC_PARAM_SIZE_READ_TX_POWER 3

#define HCI_READ_TX_POWER_HANDLE_OFF 0

#define HCI_READ_TX_POWER_TYPE_OFF 2

/* Read transmit power level parameter */

#define HCI_READ_CURRENT 0x00

#define HCI_READ_MAXIMUM 0x01

#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t)

#define MAX_DATA_HANDLES 10

#define HCI_PKTS_DONE_NUM_HANDLES_OFF 0

#define HCI_PKTS_DONE_HANDLE_OFF 1

#define HCI_PKTS_DONE_NUM_PKTS_OFF 3

#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4

#define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0

#define HCI_LINK_SUPER_TOUT_TOUT_OFF 2

/* Write Link Supervision Timeout */

#define MAX_IAC_LAPS 0x40

#define HCI_WRITE_IAC_LAP_NUM_OFF 0

#define HCI_WRITE_IAC_LAP_LAP_OFF 1

/* Write Current IAC LAP */

/*******************************************************************************

 * BLE Commands

 *      Note: "local_controller_id" is for transport, not counted in HCI

 *             message size

 ******************************************************************************/

#define HCIC_BLE_RAND_DI_SIZE 8

#define HCIC_BLE_IRK_SIZE 16

#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8

#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6

#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15

#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31

#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1

#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7

#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2

#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25

#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0

#define HCIC_PARAM_SIZE_CLEAR_ACCEPTLIST 0

#define HCIC_PARAM_SIZE_ADD_ACCEPTLIST 7

#define HCIC_PARAM_SIZE_REMOVE_ACCEPTLIST 7

#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14

#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5

#define HCIC_PARAM_SIZE_READ_CHNL_MAP 2

#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2

#define HCIC_PARAM_SIZE_BLE_ENCRYPT 32

#define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2

#define HCIC_BLE_RAND_DI_SIZE 8

#define HCIC_BLE_ENCRYPT_KEY_SIZE 16

#define HCIC_PARAM_SIZE_BLE_START_ENC \

  (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYPT_KEY_SIZE)

#define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYPT_KEY_SIZE)

#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2

#define HCIC_BLE_CHNL_MAP_SIZE 5

#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31

#define HCIC_PARAM_SIZE_BLE_ADD_DEV_RESOLVING_LIST (7 + HCIC_BLE_IRK_SIZE * 2)

#define HCIC_PARAM_SIZE_BLE_RM_DEV_RESOLVING_LIST 7

#define HCIC_PARAM_SIZE_BLE_SET_PRIVACY_MODE 8

#define HCIC_PARAM_SIZE_BLE_CLEAR_RESOLVING_LIST 0

#define HCIC_PARAM_SIZE_BLE_READ_RESOLVING_LIST_SIZE 0

#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_PEER 7

#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_LOCAL 7

#define HCIC_PARAM_SIZE_BLE_SET_ADDR_RESOLUTION_ENABLE 1

#define HCIC_PARAM_SIZE_BLE_SET_RAND_PRIV_ADDR_TIMOUT 2

#define HCIC_PARAM_SIZE_BLE_READ_PHY 2

#define HCIC_PARAM_SIZE_BLE_SET_DEFAULT_PHY 3

#define HCIC_PARAM_SIZE_BLE_SET_PHY 7

#define HCIC_PARAM_SIZE_BLE_ENH_RX_TEST 3

#define HCIC_PARAM_SIZE_BLE_ENH_TX_TEST 4

#define HCIC_PARAM_SIZE_BLE_SET_DATA_LENGTH 6

#define HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM 11

#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_REPLY 14

#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_NEG_REPLY 3

static void btsnd_hcic_inquiry(const LAP inq_lap, uint8_t duration,

                               uint8_t response_cnt) {

  BT_HDR* p = (BT_HDR*)osi_malloc(HCI_CMD_BUF_SIZE);