Merge "[PTS-Bot] Add 7 AVCTP test cases AVCTP/TG/CCM/BV-03-C... (817a2b08) · Commits · e / os / android_packages_modules_Bluetooth

android/pandora/mmi2grpc/mmi2grpc/avrcp.py

+192 −0

Original line number	Diff line number	Diff line
		@@ -165,3 +165,195 @@ class AVRCPProxy(ProfileProxy):

		"""
		return "OK"

		@assert_description
		def _mmi_1002(self, test: str, pts_addr: bytes, **kwargs):
		"""
		If necessary, take action to accept the AVDTP Signaling Channel
		Connection initiated by the tester.

		Description: Make sure the IUT
		(Implementation Under Test) is in a state to accept incoming Bluetooth
		connections. Some devices may need to be on a specific screen, like a
		Bluetooth settings screen, in order to pair with PTS. If the IUT is
		still having problems pairing with PTS, try running a test case where
		the IUT connects to PTS to establish pairing.
		"""
		self.connection = self.host.WaitConnection(address=pts_addr).connection
		try:
		self.sink = self.a2dp.WaitSink(connection=self.connection).sink
		except RpcError:
		pass

		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_send_AVCT_ConnectRsp(self, **kwargs):
		"""
		Upon a call to the callback function ConnectInd_CBTest_System, use the
		Upper Tester to send an AVCT_ConnectRsp message to the IUT with the
		following parameter values:
		* BD_ADDR = BD_ADDRLower_Tester
		*
		Connect Result = Valid value for L2CAP connect response result.
		*
		Status = Valid value for L2CAP connect response status.

		The IUT should
		then initiate an L2CAP_ConnectRsp and L2CAP_ConfigRsp.
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_verify_ConnectInd_CB(self, **kwargs):
		"""
		Press 'OK' if the following conditions were met :

		1. The IUT returns
		the following AVCT_EventRegistration output parameters to the Upper
		Tester:
		* Result = 0x0000 (Event successfully registered)

		2. The IUT
		calls the ConnectInd_CBTest_System function in the Upper Tester with the
		following parameter values:
		* BD_ADDR = BD_ADDRLower_Tester

		3. After
		reception of any expected AVCT_EventRegistration command from the Upper
		Tester and the L2CAP_ConnectReq from the Lower Tester, the IUT issues an
		L2CAP_ConnectRsp to the Lower Tester.
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_register_ConnectInd_CB(self, **kwargs):
		"""
		Using the Upper Tester register the function ConnectInd_CBTest_System
		for callback on the AVCT_Connect_Ind event by sending an
		AVCT_EventRegistration command to the IUT with the following parameter
		values:
		* Event = AVCT_Connect_Ind
		* Callback =
		ConnectInd_CBTest_System
		* PID = PIDTest_System

		Press 'OK' to
		continue once the IUT has responded.
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_register_DisconnectInd_CB(self, **kwargs):
		"""
		Using the Upper Tester register the DisconnectInd_CBTest_System function
		for callback on the AVCT_Disconnect_Ind event by sending an
		AVCT_EventRegistration command to the IUT with the following parameter
		values :
		* Event = AVCT_Disconnect_Ind
		* Callback =
		DisconnectInd_CBTest_System
		* PID = PIDTest_System

		Press 'OK' to
		continue once the IUT has responded.
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_verify_DisconnectInd_CB(self, **kwargs):
		"""
		Press 'OK' if the following conditions were met :

		1. The IUT returns
		the following AVCT_EventRegistration output parameters to the Upper
		Tester:
		* Result = 0x0000 (Event successfully registered)

		2. The IUT
		calls the DisconnectInd_CBTest_System function in the Upper Tester with
		the following parameter values:
		* BD_ADDR = BD_ADDRLower_Tester
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_verify_AVCT_SendMessage_TG(self, **kwargs):
		"""
		Press 'OK' if the following conditions were met :

		1. The IUT returns
		the following AVCT_EventRegistration output parameters to the Upper
		Tester:
		* Result = 0x0000 (Event successfully registered)

		2. The IUT
		calls the MessageInd_CBTest_System callback function of the test system
		with the following parameters:
		* BD_ADDR = BD_ADDRTest_System
		*
		Transaction = TRANSTest_System
		* Type = 0
		* Data =
		DATA[]Lower_Tester
		* Length = LengthOf(DATA[]Lower_Tester)
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_iut_reject_invalid_profile_id(self, **kwargs):
		"""
		Take action to reject the AVCTP DATA request with an invalid profile id.
		The IUT is expected to set the ipid field to invalid and return only the
		avctp header (no body data should be sent).
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_verify_fragmented_AVCT_SendMessage_TG(self, **kwargs):
		"""
		Press 'OK' if the following condition was met :

		The IUT receives three
		AVCTP packets from the Lower Tester, reassembles the message and calls
		the MessageInd_CBTestSystem callback function with the following
		parameters:
		* BD_ADDR = BD_ADDRTest_System
		* Transaction =
		TRANSTest_System
		* Type = 0x01 (Command Message)
		* Data =
		ADDRESSdata_buffer (Buffer holding DATA[]Lower_Tester)
		* Length =
		LengthOf(DATA[]Lower_Tester)
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_iut_initiate_avctp_data_response(self, **kwargs):
		"""
		Take action to send the data specified in TSPX_avctp_iut_response_data
		to the tester.

		Note: If TSPX_avctp_psm = '0017'(AVRCP control channel
		psm), a valid AVRCP response may be sent to the tester.
		"""
		return "OK"

		@assert_description
		def TSC_AVCTP_mmi_register_MessageInd_CB_TG(self, **kwargs):
		"""
		Using the Upper Tester register the function MessageInd_CBTest_System
		for callback on the AVCT_MessageRec_Ind event by sending an
		AVCT_EventRegistration command to the IUT with the following parameter
		values:
		* Event = AVCT_MessageRec_Ind
		* Callback =
		MessageInd_CBTest_System
		* PID = PIDTest_System

		Press 'OK' to
		continue once the IUT has responded.
		"""
		#TODO: Remove trailing space post "values:" from docstring description
		return "OK"
		No newline at end of file

android/pandora/server/configs/PtsBotTest.xml

+1 −0

Original line number	Diff line number	Diff line
		@@ -21,6 +21,7 @@
		<option name="tests-config-file" value="pts_bot_tests_config.json" />
		<option name="physical" value="false" />
		<option name="profile" value="A2DP/SRC" />
		<option name="profile" value="AVCTP" />
		<option name="profile" value="AVDTP/SRC" />
		<option name="profile" value="AVRCP" />
		<option name="profile" value="GATT/CL/GAC" />

android/pandora/server/configs/pts_bot_tests_config.json

+17 −0

Original line number	Diff line number	Diff line
		@@ -7,6 +7,13 @@
		"A2DP/SRC/SET/BV-01-I",
		"A2DP/SRC/SET/BV-02-I",
		"A2DP/SRC/SET/BV-04-I",
		"AVCTP/CT/CCM/BV-03-C",
		"AVCTP/CT/CCM/BV-04-C",
		"AVCTP/TG/CCM/BV-03-C",
		"AVCTP/TG/CCM/BV-04-C",
		"AVCTP/TG/FRA/BV-03-C",
		"AVCTP/TG/NFR/BI-01-C",
		"AVCTP/TG/NFR/BV-03-C",
		"AVDTP/SRC/ACP/SIG/SMG/BI-05-C",
		"AVDTP/SRC/ACP/SIG/SMG/BI-08-C",
		"AVDTP/SRC/ACP/SIG/SMG/BI-14-C",
		@@ -125,6 +132,16 @@
		"A2DP/SRC/SUS/BV-01-I",
		"A2DP/SRC/SUS/BV-02-I",
		"A2DP/SRC/SYN/BV-02-I",
		"AVCTP/CT/CCM/BV-01-C",
		"AVCTP/CT/CCM/BV-02-C",
		"AVCTP/CT/FRA/BV-01-C",
		"AVCTP/CT/FRA/BV-04-C",
		"AVCTP/CT/NFR/BV-01-C",
		"AVCTP/CT/NFR/BV-04-C",
		"AVCTP/TG/CCM/BV-01-C",
		"AVCTP/TG/CCM/BV-02-C",
		"AVCTP/TG/FRA/BV-02-C",
		"AVCTP/TG/NFR/BV-02-C",
		"AVDTP/SRC/ACP/SIG/SMG/BI-11-C",
		"AVDTP/SRC/ACP/SIG/SMG/BI-23-C",
		"AVDTP/SRC/ACP/SIG/SMG/BV-08-C",