Delete previous LC3 encoder implementation am: 111ff202ca (427b3990) · Commits · e / os / android_packages_modules_Bluetooth

system/bta/le_audio/client.cc

+0 −1

Original line number	Diff line number	Diff line
		@@ -34,7 +34,6 @@
		#include "device/include/controller.h"
		#include "devices.h"
		#include "embdrv/lc3/Api/Lc3Decoder.hpp"
		#include "embdrv/lc3/Api/Lc3Encoder.hpp"
		#include "embdrv/lc3_enc/include/lc3.h"
		#include "gatt/bta_gattc_int.h"
		#include "le_audio_types.h"

system/btif/src/btif_leaudio_hal_version_host.cc

+0 −2

Original line number	Diff line number	Diff line
		@@ -16,8 +16,6 @@

		#include <memory>

		#include "embdrv/lc3/Api/Lc3Encoder.hpp"

		namespace bluetooth {
		namespace audio {
		class HalVersionManager {

system/embdrv/lc3/Android.bp

+0 −13

Original line number	Diff line number	Diff line
		@@ -20,7 +20,6 @@ cc_library_static {
		"Common/*.cpp",
		"Common/fft/*.c",
		"Common/Tables/*.cpp",
		"Encoder/*.cpp",
		"Decoder/*.cpp",
		"TestSupport/DatapointsAndroid.cpp",
		],
		@@ -57,18 +56,6 @@ cc_library_static {
		],
		}

		cc_fuzz {
		name: "liblc3codec_encoder_fuzzer",

		srcs: [
		"fuzzer/liblc3codec_encoder_fuzzer.cpp",
		],

		static_libs: [
		"liblc3codec",
		],
		}

		cc_fuzz {
		name: "liblc3codec_decoder_fuzzer",

system/embdrv/lc3/Api/Lc3Encoder.hpp

deleted100644 → 0

+0 −198

Original line number	Diff line number	Diff line
		/*
		* Lc3Encoder.hpp
		*
		* Copyright 2021 HIMSA II K/S - www.himsa.com. Represented by EHIMA -
		* www.ehima.com
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*/

		#ifndef API_LC3ENCODER_HPP_
		#define API_LC3ENCODER_HPP_

		#include <cstdint>
		#include <vector>

		#include "Lc3Config.hpp"

		/*
		* Forward declaration of the "internal" class EncoderTop, so
		* that the private vector of single channel encoders can be declared in
		* Lc3Encoder.
		*/
		namespace Lc3Enc {
		class EncoderTop;
		}

		/*
		* The LC3 encoder interface is specified in
		* LC3 specification Sections 2.2 "Encoder interfaces" (dr09r07).
		*
		* Lc3Encoder is designed such that all specified features are provided
		* with the (current) exception of not providing other input bit depth
		* than 16 bit/sample. At the time of writing, the main purpose of the
		* implementation was to handle 16bit audio data provided within android
		* smartphones. Providing the specified 24bit and 32 bit audio data input,
		* would make the API more complex. However, the main argument to not support
		* these sample rates right now, is that internal operations and memory
		* consumption would have to be increased measurable otherwise.
		*
		* Instantiating Lc3Encoder implies providing a Lc3Config instance. A copy of
		* this instance is available as public const member so that all essential
		* session parameters can be obtained throughout the lifetime of the Lc3Encoder
		* instance.
		*
		* There is no possibility of changing Lc3Config within Lc3Encoder. When session
		* parameters have to be changed, the calling application has to create a new
		* instance of Lc3Encoder.
		*
		* Lc3 supports operation with variable encoded bitrate. It is possible to
		* change the bitrate from frame to frame, where for preciseness the parameter
		* is not given as bit rate directly but in terms of the byte_count per frame.
		* This parameter has to be in the range of 20 to 400 (see LC3 specification
		* Section 3.2.5 "Bit budget and bitrate")
		*
		*/

		class Lc3Encoder {
		public:
		/*
		* Convenience constructor of Lc3Encoder with one simple parameter only.
		* Note that this constructor instantiated Lc3Config implicitly with
		* Lc3Config(Fs, Lc3Config::FrameDuration::d10ms, 1) that means that this
		* constructor provides processing of one channel (mono) with 10ms frame
		* duration.
		*
		* Parameters:
		* Fs : Sampling frequency in Hz -> see Lc3Config.hpp for supported values
		*/
		Lc3Encoder(uint16_t Fs);

		/*
		* General constructor of Lc3Encoder.
		*
		* Parameters:
		* lc3Config_ : instance of Lc3Config. See documentation of Lc3Config for
		* more details. Note: providing an invalid instance of Lc3Config will result
		* in skipping any processing later.
		* The provided instance of Lc3Config will be copied to the
		* public field "lc3Config" (see below).
		*
		* bits_per_audio_sample_enc_ : The bits per audio sample for the input PCM
		* signal. See LC3 specification Section 2.2 "Encoder interfaces" and
		* Section 3.2.3 "Bits per sample" for the general LC3 requirement to support
		* 16, 24 and 32 bit. Note: This parameter may differ from the decoder output
		* PCM setting "bits_per_audio_sample_dec".
		*
		* However, the current implementation allows
		* 16 bit only and will return an error INVALID_BITS_PER_AUDIO_SAMPLE for
		* run() when configured with any other value. (see reasoning for this
		* constraint in the general class descripton above)
		*
		* datapoints : pointer to an instance of a class allowing to collect internal
		* data. Note: this feature is used and prepared for testing of the codec
		* implementation only. See general "Readme.txt"
		*/
		Lc3Encoder(Lc3Config lc3Config_, uint8_t bits_per_audio_sample_enc_ = 16,
		void* datapoints = nullptr);

		// no default constructor supported
		Lc3Encoder() = delete;

		// Destructor
		virtual ~Lc3Encoder();

		/*
		* Configuration provided during instantiation accessible as public const
		* fields. Note: Lc3Config provides a getter to check whether the
		* configuration is valid.
		*/
		const Lc3Config lc3Config;
		const uint8_t bits_per_audio_sample_enc;

		// encoding errors (see return values of "run" methods)
		static const uint8_t ERROR_FREE = 0x00;
		static const uint8_t INVALID_CONFIGURATION = 0x01;
		static const uint8_t INVALID_BYTE_COUNT = 0x02;
		static const uint8_t INVALID_BITS_PER_AUDIO_SAMPLE = 0x03;
		static const uint8_t ENCODER_ALLOCATION_ERROR = 0x04;

		/*
		* Encoding of one input frame for one channel.
		*
		* Note that this method can be used for multi-channel configurations as well,
		* particularly when the provided multi-channel "run" (see below) is not
		* providing the kind of byte stream concatenation desired by a specific
		* application.
		*
		* Parameters:
		* x : pointer to input signal array with 16bit/sample.
		* The length of the signal to be provided depends on the given
		* session configuration and can be obtained via
		* lc3Config.NF
		*
		* byte_count : determines the compression strength (-> bitrate) to be used
		* for this specific frame. Supported values are 20 bytes to 400
		* bytes, where values well below 40 bytes typically give rather poor audio
		* quality. Note: in case of having an application targeting a given bitrate,
		* the helper method "lc3Config.getByteCountFromBitrate(.)" can be used to
		* compute the proper setting for this byte_count parameter.
		*
		* bytes : pointer to byte array (memory) provided by the application,
		* where the encoded byte stream will be placed. The size of this memory is
		* given by the byte_count parameter.
		*
		* channelNr : index of channel to be processed (default=0), where channelNr
		* < lc3Config.Nc
		*
		* Return value: error code as listed above.
		*/
		uint8_t run(const int16_t* x, uint16_t byte_count, uint8_t* bytes,
		uint8_t channelNr = 0);

		/*
		* Encoding of one multi-channel frame.
		*
		* Note that this call always processes all channels configured in the given
		* session.
		*
		* Parameters:
		* x : pointer to input signal array with 16bit/sample.
		* The length of the signal to be provided depends on the given
		* session configuration and can be obtained via
		* lc3Config.NF * lc3Config.Nc
		*
		* byte_count_per_channel : determines the compression strength (-> bitrate)
		* to be used for each channel individually of this specific frame. Thus,
		* byte_count_per_channel is an array of byte_count values with length
		* lc3Conig.Nc Supported values per channel are 20 bytes to 400 bytes. See
		* also the documentation for the single channel "run" above.
		*
		* bytes : pointer to byte array (memory) provided by the application,
		* where the encoded byte stream will be placed. The size of this memory is
		* given by the byte_count_per_channel parameter, specifically by the sum of
		* all channel-wise byte_count values (byte_count_per_channel[0] + ... +
		* byte_count_per_channel[lc3Config.Nc]) This implies that the encoded bytes
		* from the individual channels are concatenated directly (without any
		* stuffing bytes or meta information).
		*
		* Return value: error code as listed above.
		*/
		uint8_t run(const int16_t* x, const uint16_t* byte_count_per_channel,
		uint8_t* bytes);

		private:
		std::vector<Lc3Enc::EncoderTop*> encoderList;
		};

		#endif /* API_LC3ENCODER_HPP_ */

system/embdrv/lc3/Encoder/AttackDetector.cpp

deleted100644 → 0

+0 −120

Original line number	Diff line number	Diff line
		/*
		* AttackDetector.cpp
		*
		* Copyright 2021 HIMSA II K/S - www.himsa.com. Represented by EHIMA -
		* www.ehima.com
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*/

		#include "AttackDetector.hpp"

		#include <cmath>

		namespace Lc3Enc {

		AttackDetector::AttackDetector(const Lc3Config& lc3Config_)
		: lc3Config(lc3Config_),
		M_F((lc3Config.N_ms == Lc3Config::FrameDuration::d10ms)
		? 160
		: 120), // 16*N_ms
		F_att(0),
		E_att_last(0),
		A_att_last(0),
		P_att_last(-1) {
		// make sure these states are initially zero as demanded by the specification
		x_att_last[0] = 0;
		x_att_last[1] = 0;
		}

		AttackDetector::~AttackDetector() {}

		void AttackDetector::run(const int16_t* const x_s, uint16_t nbytes) {
		// 3.3.6.1 Overview (d09r06_FhG)
		// -> attack detection active only for higher bitrates and fs>=32000;
		// otherwise defaults are set
		F_att = 0;
		if (lc3Config.Fs < 32000) {
		return;
		}
		bool isActive =
		((lc3Config.N_ms == Lc3Config::FrameDuration::d10ms) &&
		(lc3Config.Fs == 32000) && (nbytes > 80)) \|\|
		((lc3Config.N_ms == Lc3Config::FrameDuration::d10ms) &&
		(lc3Config.Fs >= 44100) && (nbytes >= 100)) \|\|
		((lc3Config.N_ms == Lc3Config::FrameDuration::d7p5ms) &&
		(lc3Config.Fs == 32000) && (nbytes >= 61) && (nbytes < 150)) \|\|
		((lc3Config.N_ms == Lc3Config::FrameDuration::d7p5ms) &&
		(lc3Config.Fs >= 44100) && (nbytes >= 75) && (nbytes < 150));
		if (!isActive) {
		// Note: in bitrate switching situations we have to set proper states
		E_att_last = 0;
		A_att_last = 0;
		P_att_last = -1;
		return;
		}

		// 3.3.6.2 Downsampling and filtering of input signal (d09r02_F2F)
		// Note: the following section might be converted to int32 instead
		// of double computation (maybe something for optimization)
		double x_att_extended[M_F + 2];
		x_att_extended[0] = x_att_last[0];
		x_att_extended[1] = x_att_last[1];
		double* x_att = &x_att_extended[2];
		for (uint8_t n = 0; n < M_F; n++) // downsampling
		{
		x_att[n] = 0;
		for (uint8_t m = 0; m < lc3Config.NF / M_F; m++) {
		x_att[n] += x_s[lc3Config.NF / M_F * n + m];
		}
		}
		x_att_last[0] = x_att[M_F - 2];
		x_att_last[1] = x_att[M_F - 1];
		double* x_hp = x_att_extended; // just for improve readability
		for (uint8_t n = 0; n < M_F; n++) // highpass-filtering (in-place!)
		{
		x_hp[n] = 0.375 * x_att[n] - 0.5 * x_att[n - 1] + 0.125 * x_att[n - 2];
		}

		// 3.3.6.3 Energy calculation & 3.3.6.4 Attack detection (d09r06_FhG)
		int8_t P_att = -1;
		const uint8_t N_blocks =
		(lc3Config.N_ms == Lc3Config::FrameDuration::d10ms) ? 4 : 3; // N_ms/2.5
		for (uint8_t n = 0; n < N_blocks; n++) {
		double E_att = 0;
		for (uint8_t l = 40 * n; l <= (40 * n + 39); l++) {
		E_att += x_hp[l] * x_hp[l];
		}
		double A_att =
		(0.25 * A_att_last > E_att_last) ? 0.25 * A_att_last : E_att_last;
		if (E_att > 8.5 * A_att) {
		// attack detected
		P_att = n;
		}
		E_att_last = E_att;
		A_att_last = A_att;
		}
		const uint8_t T_att = (lc3Config.N_ms == Lc3Config::FrameDuration::d10ms)
		? 2
		: 1; // floor(N_blocks/2)
		F_att = (P_att >= 0) \|\| (P_att_last >= T_att);
		P_att_last = P_att; // prepare next frame
		}

		void AttackDetector::registerDatapoints(DatapointContainer* datapoints) {
		if (nullptr != datapoints) {
		datapoints->addDatapoint("F_att", &F_att, sizeof(F_att));
		}
		}

		} // namespace Lc3Enc