Loading wifi/supplicant/1.1/Android.bp +1 −0 Original line number Diff line number Diff line Loading @@ -8,6 +8,7 @@ hidl_interface { }, srcs: [ "ISupplicant.hal", "ISupplicantStaNetwork.hal", ], interfaces: [ "android.hardware.wifi.supplicant@1.0", Loading wifi/supplicant/1.1/ISupplicantStaNetwork.hal 0 → 100644 +100 −0 Original line number Diff line number Diff line /* * Copyright 2016 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.supplicant@1.1; import @1.0::ISupplicantNetwork; import @1.0::ISupplicantStaNetworkCallback; import @1.0::SupplicantStatus; import @1.0::ISupplicantStaNetwork; /** * Interface exposed by the supplicant for each station mode network * configuration it controls. */ interface ISupplicantStaNetwork extends @1.0::ISupplicantStaNetwork { /** * EAP IMSI Identity to be used for authentication to EAP SIM networks. * The identity must be derived from the IMSI retrieved from the SIM card. * * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols. * * Identity string is built from IMSI. Format is: * eapPrefix | IMSI | '@' | realm * where: * - "|" denotes concatenation * - realm is the 3GPP network domain name derived from the given * MCC/MNC according to the 3GGP spec(TS23.003) * * eapPrefix value: * '0' - EAP-AKA Identity * '1' - EAP-SIM Identity * '6' - EAP-AKA-PRIME Identity */ typedef vec<uint8_t> EapSimIdentity; /** * Encrypted EAP IMSI Identity to be used for authentication to EAP SIM * networks which supports encrypted IMSI. * The identity must be derived from the IMSI retrieved from the SIM card. * This identity is then encrypted using the public key of the carrier. * * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols. * See section 7.1 of RFC 2437 for RSA-OAEP encryption scheme. * * Identity string is built from encrypted IMSI. Format is: * '\0' | Base64{RSA-OAEP-SHA-256(eapPrefix | IMSI)} * | '@' | realm | {',' Key Identifier} * where: * - "|" denotes concatenation * - "{}" denotes an optional value * - realm is the 3GPP network domain name derived from the given * MCC/MNC according to the 3GGP spec(TS23.003) * - Key Identifier is a null-terminated string of the form "<Key>=<Value>" */ typedef vec<uint8_t> EapSimEncryptedIdentity; /** * Set EAP encrypted IMSI Identity for this network. * * @param identity Identity string built from the encrypted IMSI. * @return status Status of the operation. * Possible status codes: * |SupplicantStatusCode.SUCCESS|, * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, * |SupplicantStatusCode.FAILURE_UNKNOWN|, * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| */ setEapEncryptedImsiIdentity(EapSimEncryptedIdentity identity) generates (SupplicantStatus status); /** * Used to send a response to the * |ISupplicantNetworkCallback.onNetworkEapIdentityRequest| request. * * @param identity Identity string containing the IMSI. * @param encryptedIdentity Identity string containing the encrypted IMSI. * @return status Status of the operation. * Possible status codes: * |SupplicantStatusCode.SUCCESS|, * |SupplicantStatusCode.FAILURE_UNKNOWN|, * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| */ sendNetworkEapIdentityResponse_1_1( EapSimIdentity identity, EapSimEncryptedIdentity encryptedIdentity) generates (SupplicantStatus status); }; Loading
wifi/supplicant/1.1/Android.bp +1 −0 Original line number Diff line number Diff line Loading @@ -8,6 +8,7 @@ hidl_interface { }, srcs: [ "ISupplicant.hal", "ISupplicantStaNetwork.hal", ], interfaces: [ "android.hardware.wifi.supplicant@1.0", Loading
wifi/supplicant/1.1/ISupplicantStaNetwork.hal 0 → 100644 +100 −0 Original line number Diff line number Diff line /* * Copyright 2016 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.supplicant@1.1; import @1.0::ISupplicantNetwork; import @1.0::ISupplicantStaNetworkCallback; import @1.0::SupplicantStatus; import @1.0::ISupplicantStaNetwork; /** * Interface exposed by the supplicant for each station mode network * configuration it controls. */ interface ISupplicantStaNetwork extends @1.0::ISupplicantStaNetwork { /** * EAP IMSI Identity to be used for authentication to EAP SIM networks. * The identity must be derived from the IMSI retrieved from the SIM card. * * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols. * * Identity string is built from IMSI. Format is: * eapPrefix | IMSI | '@' | realm * where: * - "|" denotes concatenation * - realm is the 3GPP network domain name derived from the given * MCC/MNC according to the 3GGP spec(TS23.003) * * eapPrefix value: * '0' - EAP-AKA Identity * '1' - EAP-SIM Identity * '6' - EAP-AKA-PRIME Identity */ typedef vec<uint8_t> EapSimIdentity; /** * Encrypted EAP IMSI Identity to be used for authentication to EAP SIM * networks which supports encrypted IMSI. * The identity must be derived from the IMSI retrieved from the SIM card. * This identity is then encrypted using the public key of the carrier. * * See RFC4186 & RFC4187 & RFC5448 for EAP SIM protocols. * See section 7.1 of RFC 2437 for RSA-OAEP encryption scheme. * * Identity string is built from encrypted IMSI. Format is: * '\0' | Base64{RSA-OAEP-SHA-256(eapPrefix | IMSI)} * | '@' | realm | {',' Key Identifier} * where: * - "|" denotes concatenation * - "{}" denotes an optional value * - realm is the 3GPP network domain name derived from the given * MCC/MNC according to the 3GGP spec(TS23.003) * - Key Identifier is a null-terminated string of the form "<Key>=<Value>" */ typedef vec<uint8_t> EapSimEncryptedIdentity; /** * Set EAP encrypted IMSI Identity for this network. * * @param identity Identity string built from the encrypted IMSI. * @return status Status of the operation. * Possible status codes: * |SupplicantStatusCode.SUCCESS|, * |SupplicantStatusCode.FAILURE_ARGS_INVALID|, * |SupplicantStatusCode.FAILURE_UNKNOWN|, * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| */ setEapEncryptedImsiIdentity(EapSimEncryptedIdentity identity) generates (SupplicantStatus status); /** * Used to send a response to the * |ISupplicantNetworkCallback.onNetworkEapIdentityRequest| request. * * @param identity Identity string containing the IMSI. * @param encryptedIdentity Identity string containing the encrypted IMSI. * @return status Status of the operation. * Possible status codes: * |SupplicantStatusCode.SUCCESS|, * |SupplicantStatusCode.FAILURE_UNKNOWN|, * |SupplicantStatusCode.FAILURE_NETWORK_INVALID| */ sendNetworkEapIdentityResponse_1_1( EapSimIdentity identity, EapSimEncryptedIdentity encryptedIdentity) generates (SupplicantStatus status); };
