Merge "Support different SIM power states" (f94eb06d) · Commits · e / os / android_hardware_interfaces

radio/1.1/Android.bp

+4 −0

Original line number	Diff line number	Diff line
		@@ -3,6 +3,7 @@
		filegroup {
		name: "android.hardware.radio@1.1_hal",
		srcs: [
		"types.hal",
		"IRadio.hal",
		"IRadioIndication.hal",
		"IRadioResponse.hal",
		@@ -17,6 +18,7 @@ genrule {
		":android.hardware.radio@1.1_hal",
		],
		out: [
		"android/hardware/radio/1.1/types.cpp",
		"android/hardware/radio/1.1/RadioAll.cpp",
		"android/hardware/radio/1.1/RadioIndicationAll.cpp",
		"android/hardware/radio/1.1/RadioResponseAll.cpp",
		@@ -31,6 +33,8 @@ genrule {
		":android.hardware.radio@1.1_hal",
		],
		out: [
		"android/hardware/radio/1.1/types.h",
		"android/hardware/radio/1.1/hwtypes.h",
		"android/hardware/radio/1.1/IRadio.h",
		"android/hardware/radio/1.1/IHwRadio.h",
		"android/hardware/radio/1.1/BnHwRadio.h",

radio/1.1/IRadio.hal

+30 −0

Original line number	Diff line number	Diff line
		@@ -51,4 +51,34 @@ interface IRadio extends @1.0::IRadio {
		*/
		oneway setCarrierInfoForImsiEncryption(int32_t serial, vec<uint8_t> carrierKey,
		string keyIdentifier);

		/**
		* Set SIM card power state.
		* Request is equivalent to inserting or removing the card.
		*
		* The radio modem must generate IRadioIndication.simStatusChanged() as if the SIM had been
		* inserted or removed.
		*
		* @param serial Serial number of request
		* @param powerUp POWER_DOWN if powering down the SIM card,
		* POWER_UP if powering up the SIM card,
		* POWER_UP_PASS_THROUGH if powering up the SIM card in pass through mode.
		* When SIM card is in POWER_UP_PASS_THROUGH, the modem does not send any command to it
		* (for example SELECT of MF, or TERMINAL CAPABILITY), and the SIM card is controlled
		* completely by Telephony sending APDUs directly. The SIM card state must be
		* RIL_CARDSTATE_PRESENT and the number of card apps will be 0.
		* No new error code is generated. Emergency calls are supported in the same way as if the
		* SIM card is absent.
		* POWER_UP_PASS_THROUGH mode is valid only for the specific card session where it is activated,
		* and normal behavior occurs at the next SIM initialization, unless POWER_UP_PASS_THROUGH mode
		* is requested again.
		* The device is required to power down the SIM card before it can switch the mode between
		* POWER_UP and POWER_UP_PASS_THROUGH.
		* At device power up, the SIM interface is powered up automatically. Each subsequent request
		* to this method is processed only after the completion of the previous one.
		*
		* Response callback is IRadioResponse.setSimCardPowerResponse_1_1()
		*/
		oneway setSimCardPower_1_1(int32_t serial, CardPowerState powerUp);

		};

radio/1.1/IRadioResponse.hal

+12 −0

Original line number	Diff line number	Diff line
		@@ -34,4 +34,16 @@ interface IRadioResponse extends @1.0::IRadioResponse {
		* RadioError:MODEM_INTERNAL_FAILURE
		*/
		oneway setCarrierInfoForImsiEncryptionResponse(RadioResponseInfo info);

		/**
		* @param info Response info struct containing response type, serial no. and error
		*
		* Valid errors returned:
		* RadioError:NONE
		* RadioError:RADIO_NOT_AVAILABLE
		* RadioError:REQUEST_NOT_SUPPORTED
		* RadioError:INVALID_ARGUMENTS
		*/
		oneway setSimCardPowerResponse_1_1(RadioResponseInfo info);

		};

radio/1.1/types.hal

0 → 100644

+23 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2016 The Android Open Source Project
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*/

		package android.hardware.radio@1.1;

		enum CardPowerState : int32_t {
		POWER_DOWN,
		POWER_UP,
		POWER_UP_PASS_THROUGH,
		};