Loading wifi/hostapd/1.0/Android.bp 0 → 100644 +23 −0 Original line number Diff line number Diff line // This file is autogenerated by hidl-gen -Landroidbp. hidl_interface { name: "android.hardware.wifi.hostapd@1.0", root: "android.hardware", vndk: { enabled: true, }, srcs: [ "types.hal", "IHostapd.hal", ], interfaces: [ "android.hardware.wifi.supplicant@1.0", "android.hidl.base@1.0", ], types: [ "HostapdStatus", "HostapdStatusCode", ], gen_java: true, } wifi/hostapd/1.0/IHostapd.hal 0 → 100644 +160 −0 Original line number Diff line number Diff line /* * Copyright 2017 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.hostapd@1.0; import android.hardware.wifi.supplicant@1.0::Ssid; /** * Top-level object for managing SoftAPs. */ interface IHostapd { /** * Size limits for some of the params used in this interface. */ enum ParamSizeLimits : uint32_t { /** Max length of SSID param. */ SSID_MAX_LEN_IN_BYTES = 32, /** Min length of PSK passphrase param. */ WPA2_PSK_PASSPHRASE_MIN_LEN_IN_BYTES = 8, /** Max length of PSK passphrase param. */ WPA2_PSK_PASSPHRASE_MAX_LEN_IN_BYTES = 63, }; /** Possble Security types. */ enum EncryptionType : uint32_t { NONE, WPA, WPA2 }; /** * Band to use for the SoftAp operations. * When using ACS, special value |BAND_ANY| can be * used to indicate that any supported band can be used. This special * case is currently supported only with drivers with which * offloaded ACS is used. */ enum Band : uint32_t { BAND_2_4_GHZ, BAND_5_GHZ, BAND_ANY }; /** * Parameters to control the HW mode for the interface. */ struct HwModeParams { /** * Whether IEEE 802.11n (HT) is enabled or not. * Note: hwMode=G (2.4 GHz) and hwMode=A (5 GHz) is used to specify * the band. */ bool enable80211N; /** * Whether IEEE 802.11ac (VHT) is enabled or not. * Note: hw_mode=a is used to specify that 5 GHz band is used with VHT. */ bool enable80211AC; }; /** * Parameters to control the channel selection for the interface. */ struct ChannelParams { /** * Whether to enable ACS (Automatic Channel Selection) or not. * The channel can be selected automatically at run time by setting * this flag, which must enable the ACS survey based algorithm. */ bool enableAcs; /** * This option can be used to exclude all DFS channels from the ACS * channel list in cases where the driver supports DFS channels. **/ bool acsShouldExcludeDfs; /** * Channel number (IEEE 802.11) to use for the interface. * If ACS is enabled, this field is ignored. */ uint32_t channel; /** * Band to use for the SoftAp operations. */ Band band; }; /** * Parameters to use for setting up the access point interface. */ struct IfaceParams { /** Name of the interface */ string ifaceName; /** Hw mode params for the interface */ HwModeParams hwModeParams; /** Chanel params for the interface */ ChannelParams channelParams; }; /** * Parameters to use for setting up the access point network. */ struct NetworkParams { /** SSID to set for the network */ Ssid ssid; /** Whether the network needs to be hidden or not. */ bool isHidden; /** Key management mask for the network. */ EncryptionType encryptionType; /** Passphrase for WPA_PSK network. */ string pskPassphrase; }; /** * Adds a new access point for hostapd to control. * * This should trigger the setup of an access point with the specified * interface and network params. * * @param ifaceParams AccessPoint Params for the access point. * @param nwParams Network Params for the access point. * @return status Status of the operation. * Possible status codes: * |HostapdStatusCode.SUCCESS|, * |HostapdStatusCode.FAILURE_ARGS_INVALID|, * |HostapdStatusCode.FAILURE_UNKNOWN|, * |HostapdStatusCode.FAILURE_IFACE_EXISTS| */ addAccessPoint(IfaceParams ifaceParams, NetworkParams nwParams) generates(HostapdStatus status); /** * Removes an existing access point from hostapd. * * This should bring down the access point previously setup on the * interface. * * @param ifaceName Name of the interface. * @return status Status of the operation. * Possible status codes: * |HostapdStatusCode.SUCCESS|, * |HostapdStatusCode.FAILURE_UNKNOWN|, * |HostapdStatusCode.FAILURE_IFACE_UNKNOWN| */ removeAccessPoint(string ifaceName) generates(HostapdStatus status); }; wifi/hostapd/1.0/types.hal 0 → 100644 +45 −0 Original line number Diff line number Diff line /* * Copyright 2017 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.hostapd@1.0; /** * Enum values indicating the status of any hostapd operation. */ enum HostapdStatusCode : uint32_t { /** No errors. */ SUCCESS, /** Unknown failure occured. */ FAILURE_UNKNOWN, /** One or more of the incoming args is invalid. */ FAILURE_ARGS_INVALID, /** Iface with the provided name does not exist. */ FAILURE_IFACE_UNKNOWN, /** Iface with the provided name already exists. */ FAILURE_IFACE_EXISTS }; /** * Generic structure to return the status of any hostapd operation. */ struct HostapdStatus { HostapdStatusCode code; /** * A vendor-specific error message to provide more information beyond the * status code. * This must be used for debugging purposes only. */ string debugMessage; }; Loading
wifi/hostapd/1.0/Android.bp 0 → 100644 +23 −0 Original line number Diff line number Diff line // This file is autogenerated by hidl-gen -Landroidbp. hidl_interface { name: "android.hardware.wifi.hostapd@1.0", root: "android.hardware", vndk: { enabled: true, }, srcs: [ "types.hal", "IHostapd.hal", ], interfaces: [ "android.hardware.wifi.supplicant@1.0", "android.hidl.base@1.0", ], types: [ "HostapdStatus", "HostapdStatusCode", ], gen_java: true, }
wifi/hostapd/1.0/IHostapd.hal 0 → 100644 +160 −0 Original line number Diff line number Diff line /* * Copyright 2017 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.hostapd@1.0; import android.hardware.wifi.supplicant@1.0::Ssid; /** * Top-level object for managing SoftAPs. */ interface IHostapd { /** * Size limits for some of the params used in this interface. */ enum ParamSizeLimits : uint32_t { /** Max length of SSID param. */ SSID_MAX_LEN_IN_BYTES = 32, /** Min length of PSK passphrase param. */ WPA2_PSK_PASSPHRASE_MIN_LEN_IN_BYTES = 8, /** Max length of PSK passphrase param. */ WPA2_PSK_PASSPHRASE_MAX_LEN_IN_BYTES = 63, }; /** Possble Security types. */ enum EncryptionType : uint32_t { NONE, WPA, WPA2 }; /** * Band to use for the SoftAp operations. * When using ACS, special value |BAND_ANY| can be * used to indicate that any supported band can be used. This special * case is currently supported only with drivers with which * offloaded ACS is used. */ enum Band : uint32_t { BAND_2_4_GHZ, BAND_5_GHZ, BAND_ANY }; /** * Parameters to control the HW mode for the interface. */ struct HwModeParams { /** * Whether IEEE 802.11n (HT) is enabled or not. * Note: hwMode=G (2.4 GHz) and hwMode=A (5 GHz) is used to specify * the band. */ bool enable80211N; /** * Whether IEEE 802.11ac (VHT) is enabled or not. * Note: hw_mode=a is used to specify that 5 GHz band is used with VHT. */ bool enable80211AC; }; /** * Parameters to control the channel selection for the interface. */ struct ChannelParams { /** * Whether to enable ACS (Automatic Channel Selection) or not. * The channel can be selected automatically at run time by setting * this flag, which must enable the ACS survey based algorithm. */ bool enableAcs; /** * This option can be used to exclude all DFS channels from the ACS * channel list in cases where the driver supports DFS channels. **/ bool acsShouldExcludeDfs; /** * Channel number (IEEE 802.11) to use for the interface. * If ACS is enabled, this field is ignored. */ uint32_t channel; /** * Band to use for the SoftAp operations. */ Band band; }; /** * Parameters to use for setting up the access point interface. */ struct IfaceParams { /** Name of the interface */ string ifaceName; /** Hw mode params for the interface */ HwModeParams hwModeParams; /** Chanel params for the interface */ ChannelParams channelParams; }; /** * Parameters to use for setting up the access point network. */ struct NetworkParams { /** SSID to set for the network */ Ssid ssid; /** Whether the network needs to be hidden or not. */ bool isHidden; /** Key management mask for the network. */ EncryptionType encryptionType; /** Passphrase for WPA_PSK network. */ string pskPassphrase; }; /** * Adds a new access point for hostapd to control. * * This should trigger the setup of an access point with the specified * interface and network params. * * @param ifaceParams AccessPoint Params for the access point. * @param nwParams Network Params for the access point. * @return status Status of the operation. * Possible status codes: * |HostapdStatusCode.SUCCESS|, * |HostapdStatusCode.FAILURE_ARGS_INVALID|, * |HostapdStatusCode.FAILURE_UNKNOWN|, * |HostapdStatusCode.FAILURE_IFACE_EXISTS| */ addAccessPoint(IfaceParams ifaceParams, NetworkParams nwParams) generates(HostapdStatus status); /** * Removes an existing access point from hostapd. * * This should bring down the access point previously setup on the * interface. * * @param ifaceName Name of the interface. * @return status Status of the operation. * Possible status codes: * |HostapdStatusCode.SUCCESS|, * |HostapdStatusCode.FAILURE_UNKNOWN|, * |HostapdStatusCode.FAILURE_IFACE_UNKNOWN| */ removeAccessPoint(string ifaceName) generates(HostapdStatus status); };
wifi/hostapd/1.0/types.hal 0 → 100644 +45 −0 Original line number Diff line number Diff line /* * Copyright 2017 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.wifi.hostapd@1.0; /** * Enum values indicating the status of any hostapd operation. */ enum HostapdStatusCode : uint32_t { /** No errors. */ SUCCESS, /** Unknown failure occured. */ FAILURE_UNKNOWN, /** One or more of the incoming args is invalid. */ FAILURE_ARGS_INVALID, /** Iface with the provided name does not exist. */ FAILURE_IFACE_UNKNOWN, /** Iface with the provided name already exists. */ FAILURE_IFACE_EXISTS }; /** * Generic structure to return the status of any hostapd operation. */ struct HostapdStatus { HostapdStatusCode code; /** * A vendor-specific error message to provide more information beyond the * status code. * This must be used for debugging purposes only. */ string debugMessage; };
