supplicant(interface): Minor fixes in P2P iface am: 282a0b35b8 (d6717d1e) · Commits · e / os / android_hardware_interfaces

wifi/supplicant/1.0/ISupplicantP2pIface.hal

+34 −10

Original line number	Diff line number	Diff line
		@@ -37,11 +37,7 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		/**
		* Keypad pin method configuration - pin is entered on device.
		*/
		KEYPAD,
		/**
		* Label pin method configuration - pin is labelled on device.
		*/
		LABEL
		KEYPAD
		};

		enum GroupCapabilityMask : uint32_t {
		@@ -54,6 +50,15 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		GROUP_FORMATION = 1 << 6
		};

		/**
		* Use to specify a range of frequencies.
		* For example: 2412-2432,2462,5000-6000, etc.
		*/
		struct FreqRange {
		uint32_t min;
		uint32_t max;
		};

		/**
		* Register for callbacks from this interface.
		*
		@@ -97,7 +102,7 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|
		*/
		setSsidPostfix(string postfix) generates (SupplicantStatus status);
		setSsidPostfix(vec<uint8_t> postfix) generates (SupplicantStatus status);

		/**
		* Set the Maximum idle time in seconds for P2P groups.
		@@ -106,6 +111,7 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		* associated stations in the group. As a P2P client, this means no
		* group owner seen in scan results.
		*
		* @param groupIfName Group interface name to use.
		* @param timeoutInSec Timeout value in seconds.
		* @return status Status of the operation.
		* Possible status codes:
		@@ -113,11 +119,13 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|
		*/
		setGroupIdle(uint32_t timeoutInSec) generates (SupplicantStatus status);
		setGroupIdle(string groupIfName, uint32_t timeoutInSec)
		generates (SupplicantStatus status);

		/**
		* Turn on/off power save mode for the interface.
		*
		* @param groupIfName Group interface name to use.
		* @param enable Indicate if power save is to be turned on/off.
		* @return status Status of the operation.
		* Possible status codes:
		@@ -126,7 +134,8 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|,
		* \|SupplicantStatusCode.FAILURE_IFACE_DISABLED\|
		*/
		setPowerSave(bool enable) generates (SupplicantStatus status);
		setPowerSave(string groupIfName, bool enable)
		generates (SupplicantStatus status);

		/**
		* Initiate a P2P service discovery with an optional timeout.
		@@ -192,11 +201,11 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		*/
		connect(MacAddress peerAddress,
		WpsProvisionMethod provisionMethod,
		vec<uint8_t> preSelectedPin,
		string preSelectedPin,
		bool joinExistingGroup,
		bool persistent,
		uint32_t goIntent)
		generates (SupplicantStatus status, vec<uint8_t> generatedPin);
		generates (SupplicantStatus status, string generatedPin);

		/**
		* Cancel an ongoing P2P group formation and joining-a-group related
		@@ -357,6 +366,21 @@ interface ISupplicantP2pIface extends ISupplicantIface {
		setListenChannel(uint32_t channel, uint32_t operatingClass)
		generates (SupplicantStatus status);

		/**
		* Set P2P disallowed frequency ranges.
		*
		* Specify ranges of frequencies that are disallowed for any p2p operations.

		* @param ranges List of ranges which needs to be disallowed.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|
		*/
		setDisallowedFrequencies(vec<FreqRange> ranges)
		generates (SupplicantStatus status);

		/**
		* Gets the operational SSID of the device.
		*