add new RadioError am: e29df60bdc am: 7f565c6ba8 am: b4c9e82e04 am: 034f6c8f20 (c146f861) · Commits · e / os / android_hardware_interfaces

radio/1.6/IRadio.hal

+30 −0

Original line number	Diff line number	Diff line
		@@ -34,6 +34,36 @@ import @1.5::LinkAddress;
		* setResponseFunctions must work with @1.6::IRadioResponse and @1.6::IRadioIndication.
		*/
		interface IRadio extends @1.5::IRadio {
		/**
		* Toggle radio on and off (for "airplane" mode)
		* If the radio is turned off/on the radio modem subsystem
		* is expected return to an initialized state. For instance,
		* any voice and data calls must be terminated and all associated
		* lists emptied.
		*
		* When setting radio power on to exit from airplane mode to place an emergency call on this
		* logical modem, powerOn, forEmergencyCall and preferredForEmergencyCall must be true. In
		* this case, this modem is optimized to scan only emergency call bands, until:
		* 1) Emergency call is completed; or
		* 2) Another setRadioPower_1_5 is issued with forEmergencyCall being false or
		* preferredForEmergencyCall being false; or
		* 3) Timeout after 30 seconds if dial or emergencyDial is not called.
		* Once one of these conditions is reached, the modem should move into normal operation.
		*
		* @param serial Serial number of request.
		* @param powerOn To turn on radio -> on = true, to turn off radio -> on = false.
		* @param forEmergencyCall To indication to radio if this request is due to emergency call.
		* No effect if powerOn is false.
		* @param preferredForEmergencyCall indicate whether the following emergency call will be sent
		* on this modem or not. No effect if forEmergencyCall is false, or powerOn is false.
		*
		* Response callback is IRadioConfigResponse. setRadioPowerResponse_1_6.

		* Note this API is the same as the 1.5
		*/
		oneway setRadioPower_1_6(int32_t serial, bool powerOn, bool forEmergencyCall,
		bool preferredForEmergencyCall);

		/**
		* Returns the data call list. An entry is added when a setupDataCall() is issued and removed
		* on a deactivateDataCall(). The list is emptied when setRadioPower() off/on issued or when

radio/1.6/IRadioResponse.hal

+12 −0

Original line number	Diff line number	Diff line
		@@ -25,6 +25,18 @@ import @1.6::SetupDataCallResult;
		* Interface declaring response functions to solicited radio requests.
		*/
		interface IRadioResponse extends @1.5::IRadioResponse {
		/**
		* @param info Response info struct containing response type, serial no. and error
		*
		* Valid errors returned:
		* RadioError:NONE
		* RadioError:INTERNAL_ERR
		* RadioError:INVALID_ARGUMENTS
		* RadioError:RF_HARDWARE_ISSUE
		* RadioError:NO_RF_CALIBRATION_INFO
		*/
		oneway setRadioPowerResponse_1_6(RadioResponseInfo info);

		/**
		* @param info Response info struct containing response type, serial no. and error
		* @param dcResponse SetupDataCallResult defined in types.hal

radio/1.6/types.hal

+16 −1

Original line number	Diff line number	Diff line
		@@ -111,7 +111,22 @@ enum RadioError : @1.0::RadioError {
		* SMS is blocked due to call control, e.g., resource unavailable
		* in the SMR entity.
		*/
		BLOCKED_DUE_TO_CALL = 69
		BLOCKED_DUE_TO_CALL = 69,

		/**
		* Returned from setRadioPowerResponse when detecting RF HW issues. Some RF
		* Front-End(RFFE) components like antenna are considered critical for modem
		* to provide telephony service. This RadioError is used when modem detect
		* such RFFE problem.
		*/
		RF_HARDWARE_ISSUE = 70,

		/**
		* Returned from setRadioPowerResponse when detecting no RF calibration
		* issue. Unlike RF_HARDWARE_ISSUE, this is a SW problem and no HW repair is
		* needed.
		*/
		NO_RF_CALIBRATION_INFO = 71,
		};

		/**

radio/1.6/vts/functional/Android.bp

+4 −1

Original line number	Diff line number	Diff line
		@@ -38,5 +38,8 @@ cc_test {
		"android.hardware.radio.config@1.1",
		],
		header_libs: ["radio.util.header@1.0"],
		test_suites: ["general-tests", "vts"]
		test_suites: [
		"general-tests",
		"vts",
		],
		}

radio/1.6/vts/functional/radio_hidl_hal_api.cpp

+32 −0

Original line number	Diff line number	Diff line
		@@ -227,3 +227,35 @@ TEST_P(RadioHidlTest_v1_6, sendCdmaSmsExpectMore_1_6) {
		CHECK_GENERAL_ERROR));
		}
		}

		/*
		* Test IRadio.setRadioPower_1_6() for the response returned by
		* IRadio.setRadioPowerResponse_1_6().
		*/
		TEST_P(RadioHidlTest_v1_6, setRadioPower_1_6_emergencyCall_cancelled) {
		// Set radio power to off.
		serial = GetRandomSerialNumber();
		radio_v1_6->setRadioPower_1_6(serial, false, false, false);
		EXPECT_EQ(std::cv_status::no_timeout, wait());
		EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
		EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
		EXPECT_EQ(::android::hardware::radio::V1_6::RadioError::NONE, radioRsp_v1_6->rspInfo.error);

		// Set radio power to on with forEmergencyCall being true. This should put modem to only scan
		// emergency call bands.
		serial = GetRandomSerialNumber();
		radio_v1_6->setRadioPower_1_6(serial, true, true, true);
		EXPECT_EQ(std::cv_status::no_timeout, wait());
		EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
		EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
		EXPECT_EQ(::android::hardware::radio::V1_6::RadioError::NONE, radioRsp_v1_6->rspInfo.error);

		// Set radio power to on with forEmergencyCall being false. This should put modem in regular
		// operation modem.
		serial = GetRandomSerialNumber();
		radio_v1_6->setRadioPower_1_6(serial, true, false, false);
		EXPECT_EQ(std::cv_status::no_timeout, wait());
		EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp_v1_6->rspInfo.type);
		EXPECT_EQ(serial, radioRsp_v1_6->rspInfo.serial);
		EXPECT_EQ(::android::hardware::radio::V1_6::RadioError::NONE, radioRsp_v1_6->rspInfo.error);
		}