Integrate missing changes from vehicle.h (af3c7f46) · Commits · e / os / android_hardware_interfaces

vehicle/2.0/types.hal

+103 −28

Original line number	Diff line number	Diff line
		@@ -445,7 +445,7 @@ enum VehicleProperty: int32_t {
		* direction.
		*
		* @change_mode VehiclePropertyChangeMode:ON_CHANGE
		* @access VehiclePropertyAccess:WRITE
		* @access VehiclePropertyAccess:READ_WRITE
		*/
		HVAC_SEAT_TEMPERATURE = (
		0x050B
		@@ -453,6 +453,87 @@ enum VehicleProperty: int32_t {
		\| VehiclePropertyType:INT32
		\| VehicleArea:SEAT),

		/**
		* Side Mirror Heat
		*
		* Increase values denote higher heating levels for side mirrors.
		* 0 indicates heating is turned off.
		*
		* @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
		* @access VEHICLE_PROP_ACCESS_READ_WRITE
		*/
		HVAC_SIDE_MIRROR_HEAT = (
		0x050C
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:MIRROR),

		/**
		* Steering Wheel Temperature
		*
		* Sets the temperature for the steering wheel
		* Positive value indicates heating.
		* Negative value indicates cooling.
		* 0 indicates temperature control is off.
		*
		* @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
		* @access VEHICLE_PROP_ACCESS_READ_WRITE
		*/
		HVAC_STEERING_WHEEL_TEMP = (
		0x050D
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:GLOBAL),

		/**
		* Temperature units
		*
		* Indicates whether the temperature is in Celsius, Fahrenheit, or a
		* different unit from VehicleUnit enum.
		* This parameter affects all HVAC temperatures in the system.
		*
		* @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
		* @access VEHICLE_PROP_ACCESS_READ
		*/
		HVAC_TEMPERATURE_UNITS = (
		0x050E
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:ZONE),

		/**
		* Actual fan speed
		*
		* @change_mode VEHICLE_PROP_CHANGE_MODE_ON_CHANGE
		* @access VEHICLE_PROP_ACCESS_READ
		* @allow_out_of_range_value : OFF
		*/
		HVAC_ACTUAL_FAN_SPEED_RPM = (
		0x050F
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:ZONE),

		/**
		* Fan Positions Available
		*
		* This is a bit mask of fan positions available for the zone. Each entry in
		* vehicle_hvac_fan_direction is selected by bit position. For instance, if
		* only the FAN_DIRECTION_FACE (0x1) and FAN_DIRECTION_DEFROST (0x4) are available,
		* then this value shall be set to 0x12.
		*
		* 0x12 = (1 << 1) \| (1 << 4)
		*
		* @change_mode VEHICLE_PROP_CHANGE_MODE_STATIC
		* @access VEHICLE_PROP_ACCESS_READ
		* @allow_out_of_range_value : OFF
		*/
		HVAC_FAN_DIRECTION_AVAILABLE = (
		0x0511
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:ZONE),

		/*
		* Represents power state for HVAC. Some HVAC properties must require
		* matching power to be turned on to get out of OFF state. For non-zoned
		@@ -516,7 +597,7 @@ enum VehicleProperty: int32_t {
		* @config_flags Number of presets supported
		*/
		RADIO_PRESET = (
		0x801
		0x0801
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32_VEC
		\| VehicleArea:GLOBAL),
		@@ -1017,20 +1098,6 @@ enum VehicleProperty: int32_t {
		\| VehiclePropertyType:BOOLEAN
		\| VehicleArea:GLOBAL),

		/*
		* Mirror Heat
		*
		* Increase values denote higher heating levels.
		*
		* @change_mode VehiclePropertyChangeMode:ON_CHANGE
		* @access VehiclePropertyAccess:READ_WRITE
		*/
		MIRROR_HEAT = (
		0x0B45
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:INT32
		\| VehicleArea:GLOBAL),

		/*
		* Mirror Fold
		*
		@@ -1040,7 +1107,7 @@ enum VehicleProperty: int32_t {
		* @access VehiclePropertyAccess:READ_WRITE
		*/
		MIRROR_FOLD = (
		0x0B46
		0x0B45
		\| VehiclePropertyGroup:SYSTEM
		\| VehiclePropertyType:BOOLEAN
		\| VehicleArea:GLOBAL),
		@@ -1383,7 +1450,7 @@ enum VehicleProperty: int32_t {
		\| VehicleArea:GLOBAL),

		/*
		* Headrest heigh move
		* Headrest height move
		*
		* Moves the headrest up and down.
		*
		@@ -1427,6 +1494,11 @@ enum VehicleProperty: int32_t {
		\| VehicleArea:SEAT),

		/*
		* Headrest fore/aft position
		*
		* Adjusts the headrest forwards and backwards.
		* Max value indicates position closest to front of car.
		* Min value indicates position closest to rear of car.
		*
		* @change_mode VehiclePropertyChangeMode:ON_CHANGE
		* @access VehiclePropertyAccess:READ_WRITE
		@@ -1438,6 +1510,7 @@ enum VehicleProperty: int32_t {
		\| VehicleArea:SEAT),

		/*
		* Headrest fore/aft move
		*
		* @change_mode VehiclePropertyChangeMode:ON_CHANGE
		* @access VehiclePropertyAccess:READ_WRITE
		@@ -1991,7 +2064,9 @@ enum VehicleUnit : int32_t {
		MILLIMETER = 0x20,
		METER = 0x21,
		KILOMETER = 0x23,
		CELCIUS = 0x30,
		CELSIUS = 0x30,
		FAHRENHEIT = 0x31,
		KELVIN = 0x32,
		MILLILITER = 0x40,
		NANO_SECS = 0x50,
		SECS = 0x53,
		@@ -2140,15 +2215,15 @@ enum VehicleAreaZone : int32_t {
		* Various Seats in the car.
		*/
		enum VehicleAreaSeat : int32_t {
		ROW_1_PASSENGER_LEFT = 0x0001,
		ROW_1_PASSENGER_CENTER = 0x0002,
		ROW_1_PASSENGER_RIGHT = 0x0004,
		ROW_2_PASSENGER_LEFT = 0x0010,
		ROW_2_PASSENGER_CENTER = 0x0020,
		ROW_2_PASSENGER_RIGHT = 0x0040,
		ROW_3_PASSENGER_LEFT = 0x0100,
		ROW_3_PASSENGER_CENTER = 0x0200,
		ROW_3_PASSENGER_RIGHT = 0x0400,
		ROW_1_LEFT = 0x0001,
		ROW_1_CENTER = 0x0002,
		ROW_1_RIGHT = 0x0004,
		ROW_2_LEFT = 0x0010,
		ROW_2_CENTER = 0x0020,
		ROW_2_RIGHT = 0x0040,
		ROW_3_LEFT = 0x0100,
		ROW_3_CENTER = 0x0200,
		ROW_3_RIGHT = 0x0400
		};

		/*