Merge "Add new precise call fail causes and OEM causes" (a6d34756) · Commits · e / os / android_hardware_interfaces

radio/1.0/IRadioResponse.hal

+28 −7

Original line number	Diff line number	Diff line
		@@ -280,13 +280,34 @@ interface IRadioResponse {

		/*
		* @param info Response info struct containing response type, serial no. and error
		* @param failCauseInfo Contains LastCallFailCause and vendor cause code. GSM failure reasons
		* are mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA
		* failure reasons are derived from the possible call failure scenarios
		* described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard.
		* @param failCauseInfo Contains LastCallFailCause and vendor cause code.
		*
		* The vendor cause code must be used for debugging purpose only.
		* The implementation must return one of the values of LastCallFailCause
		* as mentioned below
		*
		* The implementation must return LastCallFailCause:ERROR_UNSPECIFIED for blocked
		* MO calls by restricted state (See unsolRestrictedStateChanged)
		* GSM failure reasons codes for the cause codes defined in TS 24.008 Annex H
		* where possible.
		* CDMA failure reasons codes for the possible call failure scenarios
		* described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard.
		* Any of the following reason codes if the call is failed or dropped due to reason
		* mentioned with in the braces.
		* LastCallFailCause:RADIO_OFF (Radio is OFF)
		* LastCallFailCause:OUT_OF_SERVICE (No cell coverage)
		* LastCallFailCause:NO_VALID_SIM (No valid SIM)
		* LastCallFailCause:RADIO_INTERNAL_ERROR (Modem hit unexpected error scenario)
		* LastCallFailCause:NETWORK_RESP_TIMEOUT (No response from network)
		* LastCallFailCause:NETWORK_REJECT (Explicit network reject)
		* LastCallFailCause:RADIO_ACCESS_FAILURE (RRC connection failure. Eg.RACH)
		* LastCallFailCause:RADIO_LINK_FAILURE (Radio Link Failure)
		* LastCallFailCause:RADIO_LINK_LOST (Radio link lost due to poor coverage)
		* LastCallFailCause:RADIO_UPLINK_FAILURE (Radio uplink failure)
		* LastCallFailCause:RADIO_SETUP_FAILURE (RRC connection setup failure)
		* LastCallFailCause:RADIO_RELEASE_NORMAL (RRC connection release, normal)
		* LastCallFailCause:RADIO_RELEASE_ABNORMAL (RRC connection release, abnormal)
		* LastCallFailCause:ACCESS_CLASS_BLOCKED (Access class barring)
		* LastCallFailCause:NETWORK_DETACH (Explicit network detach)
		* OEM causes (LastCallFailCause:OEM_CAUSE_XX) must be used for debug purpose only
		*
		* If the implementation does not have access to the exact cause codes,
		* then it must return one of the values listed in LastCallFailCause,

radio/1.0/types.hal

+36 −2

Original line number	Diff line number	Diff line
		@@ -383,6 +383,21 @@ enum LastCallFailCause : int32_t {
		DIAL_MODIFIED_TO_USSD = 244, // STK Call Control
		DIAL_MODIFIED_TO_SS = 245,
		DIAL_MODIFIED_TO_DIAL = 246,
		RADIO_OFF = 247, // Radio is OFF
		OUT_OF_SERVICE = 248, // No cellular coverage
		NO_VALID_SIM = 249, // No valid SIM is present
		RADIO_INTERNAL_ERROR = 250, // Internal error at Modem
		NETWORK_RESP_TIMEOUT = 251, // No response from network
		NETWORK_REJECT = 252, // Explicit network reject
		RADIO_ACCESS_FAILURE = 253, // RRC connection failure. Eg.RACH
		RADIO_LINK_FAILURE = 254, // Radio Link Failure
		RADIO_LINK_LOST = 255, // Radio link lost due to poor coverage
		RADIO_UPLINK_FAILURE = 256, // Radio uplink failure
		RADIO_SETUP_FAILURE = 257, // RRC connection setup failure
		RADIO_RELEASE_NORMAL = 258, // RRC connection release, normal
		RADIO_RELEASE_ABNORMAL = 259, // RRC connection release, abnormal
		ACCESS_CLASS_BLOCKED = 260, // Access class barring
		NETWORK_DETACH = 261, // Explicit network detach
		CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000,
		CDMA_DROP = 1001,
		CDMA_INTERCEPT = 1002,
		@@ -393,10 +408,29 @@ enum LastCallFailCause : int32_t {
		CDMA_PREEMPTED = 1007,
		CDMA_NOT_EMERGENCY = 1008, // For non-emergency number dialed during emergency
		// callback mode
		CDMA_ACCESS_BLOCKED = 1009, // This error will be deprecated soon,
		CDMA_ACCESS_BLOCKED = 1009,

		/* OEM specific error codes. Used to distinguish error from
		* CALL_FAIL_ERROR_UNSPECIFIED and help assist debugging */
		OEM_CAUSE_1 = 0xf001,
		OEM_CAUSE_2 = 0xf002,
		OEM_CAUSE_3 = 0xf003,
		OEM_CAUSE_4 = 0xf004,
		OEM_CAUSE_5 = 0xf005,
		OEM_CAUSE_6 = 0xf006,
		OEM_CAUSE_7 = 0xf007,
		OEM_CAUSE_8 = 0xf008,
		OEM_CAUSE_9 = 0xf009,
		OEM_CAUSE_10 = 0xf00a,
		OEM_CAUSE_11 = 0xf00b,
		OEM_CAUSE_12 = 0xf00c,
		OEM_CAUSE_13 = 0xf00d,
		OEM_CAUSE_14 = 0xf00e,
		OEM_CAUSE_15 = 0xf00f,

		ERROR_UNSPECIFIED = 0xffff, // This error will be deprecated soon,
		// vendor code must make sure to map error
		// code to specific error
		ERROR_UNSPECIFIED = 0xffff,
		};

		enum DataCallFailCause : int32_t {