Merge "Update fingerprint SensorLocation interface for multi-display" into sc-dev (981f9b6c) · Commits · e / os / android_hardware_interfaces

biometrics/fingerprint/aidl/aidl_api/android.hardware.biometrics.fingerprint/current/android/hardware/biometrics/fingerprint/SensorLocation.aidl

0 → 100644

+40 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2021 The Android Open Source Project
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*////////////////////////////////////////////////////////////////////////////////
		// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE. //
		///////////////////////////////////////////////////////////////////////////////

		// This file is a snapshot of an AIDL file. Do not edit it manually. There are
		// two cases:
		// 1). this is a frozen version file - do not edit this in any case.
		// 2). this is a 'current' file. If you make a backwards compatible change to
		// the interface (from the latest frozen version), the build system will
		// prompt you to update this file with `m <name>-update-api`.
		//
		// You must not make a backward incompatible change to any AIDL file built
		// with the aidl_interface module type with versions property set. The module
		// type is used to build AIDL files in a way that they can be used across
		// independently updatable components of the system. If a device is shipped
		// with such a backward incompatible change, it has a high risk of breaking
		// later when a module using the interface is updated, e.g., Mainline modules.

		package android.hardware.biometrics.fingerprint;
		@VintfStability
		parcelable SensorLocation {
		int displayId;
		int sensorLocationX;
		int sensorLocationY;
		int sensorRadius;
		}

biometrics/fingerprint/aidl/aidl_api/android.hardware.biometrics.fingerprint/current/android/hardware/biometrics/fingerprint/SensorProps.aidl

+1 −4

Original line number	Diff line number	Diff line
		@@ -35,10 +35,7 @@ package android.hardware.biometrics.fingerprint;
		parcelable SensorProps {
		android.hardware.biometrics.common.CommonProps commonProps;
		android.hardware.biometrics.fingerprint.FingerprintSensorType sensorType;
		android.hardware.biometrics.fingerprint.SensorLocation[] sensorLocations;
		boolean supportsNavigationGestures;
		int sensorLocationX;
		int sensorLocationY;
		int sensorRadius;
		int displayId;
		boolean supportsDetectInteraction;
		}

biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorLocation.aidl

0 → 100644

+54 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2021 The Android Open Source Project
		*
		* Licensed under the Apache License, Version 2.0 (the "License");
		* you may not use this file except in compliance with the License.
		* You may obtain a copy of the License at
		*
		* http://www.apache.org/licenses/LICENSE-2.0
		*
		* Unless required by applicable law or agreed to in writing, software
		* distributed under the License is distributed on an "AS IS" BASIS,
		* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		* See the License for the specific language governing permissions and
		* limitations under the License.
		*/

		package android.hardware.biometrics.fingerprint;

		@VintfStability
		parcelable SensorLocation {
		/**
		* The display to which the following measurements are relative to. This must correspond to the
		* android.hardware.DisplayManager#getDisplay Android API.
		*
		* A few examples:
		* 1) A capacitive rear fingerprint sensor would specify the display to which it is behind.
		* 2) An under-display fingerprint sensor would specify the display on which the sensor is
		* located.
		* 3) A foldable device would specify multiple locations and have a SensorLocation entry
		* for each display from which the sensor is accessible from.
		*/
		int displayId;

		/**
		* The location of the center of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
		* measured from the left edge of the screen.
		*/
		int sensorLocationX;

		/**
		* The location of the center of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
		* measured from the top edge of the screen.
		*/
		int sensorLocationY;

		/**
		* The radius of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the radius of the sensor,
		* in pixels.
		*/
		int sensorRadius;
		}
		No newline at end of file

biometrics/fingerprint/aidl/android/hardware/biometrics/fingerprint/SensorProps.aidl

+7 −27

Original line number	Diff line number	Diff line
		@@ -18,6 +18,7 @@ package android.hardware.biometrics.fingerprint;

		import android.hardware.biometrics.common.CommonProps;
		import android.hardware.biometrics.fingerprint.FingerprintSensorType;
		import android.hardware.biometrics.fingerprint.SensorLocation;

		@VintfStability
		parcelable SensorProps {
		@@ -32,37 +33,16 @@ parcelable SensorProps {
		FingerprintSensorType sensorType;

		/**
		* Must be set to true for sensors that support "swipe" gestures via
		* android.view.KeyEvent#KEYCODE_SYSTEM_NAVIGATION_*.
		*/
		boolean supportsNavigationGestures;

		/**
		* The location of the center of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
		* measured from the left edge of the screen.
		* A list of display-specific locations from where the sensor is usable from. See SensorLocation
		* for more details.
		*/
		int sensorLocationX;
		SensorLocation[] sensorLocations;

		/**
		* The location of the center of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the distance in pixels,
		* measured from the top edge of the screen.
		*/
		int sensorLocationY;

		/**
		* The radius of the sensor if applicable. For example, sensors of
		* FingerprintSensorType::UNDER_DISPLAY_* would report this value as the radius of the sensor,
		* in pixels.
		*/
		int sensorRadius;

		/**
		* For sensors of FingerprintSensorType::UNDER_DISPLAY_*, this must correspond to the
		* android.hardware.DisplayManager#getDisplay Android API.
		* Must be set to true for sensors that support "swipe" gestures via
		* android.view.KeyEvent#KEYCODE_SYSTEM_NAVIGATION_*.
		*/
		int displayId;
		boolean supportsNavigationGestures;

		/**
		* Specifies whether or not the implementation supports ISession#detectInteraction.

biometrics/fingerprint/aidl/default/Fingerprint.cpp

+8 −4

Original line number	Diff line number	Diff line
		@@ -43,13 +43,17 @@ ndk::ScopedAStatus Fingerprint::getSensorProps(std::vector<SensorProps>* return_
		kSensorStrength,
		kMaxEnrollmentsPerUser,
		hardwareInfos};
		SensorLocation sensorLocation = {
		0 /* displayId */,
		0 /* sensorLocationX */,
		0 /* sensorLocationY */,
		0 /* sensorRadius */
		};
		SensorProps props = {commonProps,
		kSensorType,
		{sensorLocation},
		kSupportsNavigationGestures,
		0 /* sensorLocationX */,
		0 /* sensorLocationY */,
		0 /* sensorRadius */,
		0 /* displayId */};
		false /* supportsDetectInteraction */};
		return_val->push_back(props);
		return ndk::ScopedAStatus::ok();
		}