Loading radio/1.2/Android.bp +2 −0 Original line number Diff line number Diff line Loading @@ -31,6 +31,8 @@ hidl_interface { "CellInfoLte", "CellInfoWcdma", "IncrementalResultsPeriodicityRange", "IndicationFilter", "LinkCapacityEstimate", "MaxSearchTimeRange", "NetworkScanRequest", "NetworkScanResult", Loading radio/1.2/IRadio.hal +69 −0 Original line number Diff line number Diff line Loading @@ -17,6 +17,7 @@ package android.hardware.radio@1.2; import @1.1::IRadio; import @1.1::RadioAccessNetworks; /** * This interface is used by telephony and telecom to talk to cellular radio. Loading @@ -37,4 +38,72 @@ interface IRadio extends @1.1::IRadio { * Response function is IRadioResponse.startNetworkScanResponse() */ oneway startNetworkScan_1_2(int32_t serial, NetworkScanRequest request); /** * Sets the indication filter. * * Prevents the reporting of specified unsolicited indications from the radio. This is used * for power saving in instances when those indications are not needed. If unset, defaults to * @1.2::IndicationFilter:ALL. * * @param serial Serial number of request. * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the * indications are enabled. See @1.2::IndicationFilter for the definition of each bit. * * Response callback is IRadioResponse.setIndicationFilterResponse() */ oneway setIndicationFilter_1_2(int32_t serial, bitfield<IndicationFilter> indicationFilter); /** * Sets the signal strength reporting criteria. * * The resulting reporting criteria are the AND of all the supplied criteria. * * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria * for that RAN are implementation-defined. * * Response callback is IRadioResponse.setSignalStrengthReportingCriteriaResponse(). * * @param serial Serial number of request. * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0 * disables hysteresis. * @param hysteresisDb An interval in dB defining the required magnitude change between reports. * hysteresisDb must be smaller than the smallest threshold delta. An * interval value of 0 disables hysteresis. * @param thresholdsDbm A vector of trigger thresholds in dBm. A vector size of 0 disables the * use of thresholds for reporting. * @param ran The type of network for which to apply these thresholds. */ oneway setSignalStrengthReportingCriteria(int32_t serial, int32_t hysteresisMs, int32_t hysteresisDb, vec<int32_t> thresholdsDbm, RadioAccessNetworks ran); /** * Sets the link capacity reporting criteria. * * The resulting reporting criteria are the AND of all the supplied criteria. * * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria * for that RAN are implementation-defined. * * Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse(). * * @param serial Serial number of request. * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0 * disables hysteresis. * @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL * reports. hysteresisDlKbps must be smaller than the smallest threshold * delta. A value of 0 disables hysteresis. * @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL * reports. hysteresisUlKbps must be smaller than the smallest threshold * delta. A value of 0 disables hysteresis. * @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A * vector size of 0 disables the use of DL thresholds for * reporting. * @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A * vector size of 0 disables the use of UL thresholds for reporting. * @param ran The type of network for which to apply these thresholds. */ oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs, int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps, vec<int32_t> thresholdsUplinkKbps, RadioAccessNetworks ran); }; radio/1.2/IRadioIndication.hal +16 −0 Original line number Diff line number Diff line Loading @@ -37,4 +37,20 @@ interface IRadioIndication extends @1.1::IRadioIndication { * @param records Current cell information known to radio */ oneway cellInfoList_1_2(RadioIndicationType type, vec<CellInfo> records); /** * Indicates current link capacity estimate. * * This replaces @1.0::IRadioIndication.lceData(). The framework must be able to handle * either this function or @1.0::IRadioIndication.lceData(). Implementations supporting * v1.2 must call this function instead of lceData(). * * This indication is sent whenever the reporting criteria, as set by * @1.2::IRadio.setLinkCapacityReportingCriteria, are met and the indication is not * suppressed by @1.2::IRadio.setIndicationFilter_1_2(). * * @param type Type of radio indication * @param lce LinkCapacityEstimate information as defined in types.hal */ oneway currentLinkCapacityEstimate(RadioIndicationType type, LinkCapacityEstimate lce); }; radio/1.2/IRadioResponse.hal +22 −0 Original line number Diff line number Diff line Loading @@ -50,4 +50,26 @@ interface IRadioResponse extends @1.1::IRadioResponse { * RadioError:NONE */ oneway getIccCardStatusResponse_1_2(RadioResponseInfo info, CardStatus cardStatus); /** * @param info Response info struct containing response type, serial no. and error * * Valid errors returned: * RadioError:NONE * RadioError:INVALID_ARGUMENTS * RadioError:RADIO_NOT_AVAILABLE * RadioError:INTERNAL_ERR */ oneway setSignalStrengthReportingCriteriaResponse(RadioResponseInfo info); /** * @param info Response info struct containing response type, serial no. and error * * Valid errors returned: * RadioError:NONE * RadioError:INVALID_ARGUMENTS * RadioError:RADIO_NOT_AVAILABLE * RadioError:INTERNAL_ERR */ oneway setLinkCapacityReportingCriteriaResponse(RadioResponseInfo info); }; radio/1.2/types.hal +51 −0 Original line number Diff line number Diff line Loading @@ -64,6 +64,46 @@ enum IncrementalResultsPeriodicityRange : int32_t { MAX = 10, }; /** * Overwritten from @1.0::IndicationFilter in order to redefine ALL. In the future, this should * be extended instead of overwritten. */ enum IndicationFilter : int32_t { NONE = 0, ALL = ~0, /** * When this bit is set, modem must send the signal strength update through * IRadioIndication.currentSignalStrength() when all criteria specified by * IRadio.setSignalStrengthReportingCriteria() are met. */ SIGNAL_STRENGTH = 1 << 0, /** * When this bit is set, modem must invoke IRadioIndication.networkStateChanged() when any field * in VoiceRegStateResult or DataRegStateResult changes. When this bit is not set, modem must * suppress IRadioIndication.networkStateChanged() when there are only changes from * insignificant fields. Modem must invoke IRadioIndication.networkStateChanged() when * significant fields are updated regardless of whether this bit is set. * * The following fields are considered significant: VoiceRegStateResult.regState, * VoiceRegStateResult.rat, DataRegStateResult.regState, DataRegStateResult.rat. */ FULL_NETWORK_STATE = 1 << 1, /** * When this bit is set, modem must send IRadioIndication.dataCallListChanged() whenever any * field in ITypes.SetupDataCallResult changes. When this bit is not set, modem must suppress * the indication when the only changed field is 'active' (for data dormancy). For all other * field changes, the modem must send IRadioIndication.dataCallListChanged() regardless of * whether this bit is set. */ DATA_CALL_DORMANCY_CHANGED = 1 << 2, /** * When this bit is set, modem must send the link capacity update through * IRadioIndication.currentLinkCapacityEstimate() when all criteria specified by * IRadio.setLinkCapacityReportingCriteria() are met. */ LINK_CAPACITY_ESTIMATE = 1 << 3, }; struct NetworkScanRequest { ScanType type; Loading Loading @@ -244,3 +284,14 @@ struct CardStatus { */ string iccid; }; struct LinkCapacityEstimate { /** * Estimated downlink capacity in kbps. */ uint32_t downlinkCapacityKbps; /** * Estimated uplink capacity in kbps. */ uint32_t uplinkCapacityKbps; }; Loading
radio/1.2/Android.bp +2 −0 Original line number Diff line number Diff line Loading @@ -31,6 +31,8 @@ hidl_interface { "CellInfoLte", "CellInfoWcdma", "IncrementalResultsPeriodicityRange", "IndicationFilter", "LinkCapacityEstimate", "MaxSearchTimeRange", "NetworkScanRequest", "NetworkScanResult", Loading
radio/1.2/IRadio.hal +69 −0 Original line number Diff line number Diff line Loading @@ -17,6 +17,7 @@ package android.hardware.radio@1.2; import @1.1::IRadio; import @1.1::RadioAccessNetworks; /** * This interface is used by telephony and telecom to talk to cellular radio. Loading @@ -37,4 +38,72 @@ interface IRadio extends @1.1::IRadio { * Response function is IRadioResponse.startNetworkScanResponse() */ oneway startNetworkScan_1_2(int32_t serial, NetworkScanRequest request); /** * Sets the indication filter. * * Prevents the reporting of specified unsolicited indications from the radio. This is used * for power saving in instances when those indications are not needed. If unset, defaults to * @1.2::IndicationFilter:ALL. * * @param serial Serial number of request. * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the * indications are enabled. See @1.2::IndicationFilter for the definition of each bit. * * Response callback is IRadioResponse.setIndicationFilterResponse() */ oneway setIndicationFilter_1_2(int32_t serial, bitfield<IndicationFilter> indicationFilter); /** * Sets the signal strength reporting criteria. * * The resulting reporting criteria are the AND of all the supplied criteria. * * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria * for that RAN are implementation-defined. * * Response callback is IRadioResponse.setSignalStrengthReportingCriteriaResponse(). * * @param serial Serial number of request. * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0 * disables hysteresis. * @param hysteresisDb An interval in dB defining the required magnitude change between reports. * hysteresisDb must be smaller than the smallest threshold delta. An * interval value of 0 disables hysteresis. * @param thresholdsDbm A vector of trigger thresholds in dBm. A vector size of 0 disables the * use of thresholds for reporting. * @param ran The type of network for which to apply these thresholds. */ oneway setSignalStrengthReportingCriteria(int32_t serial, int32_t hysteresisMs, int32_t hysteresisDb, vec<int32_t> thresholdsDbm, RadioAccessNetworks ran); /** * Sets the link capacity reporting criteria. * * The resulting reporting criteria are the AND of all the supplied criteria. * * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria * for that RAN are implementation-defined. * * Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse(). * * @param serial Serial number of request. * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0 * disables hysteresis. * @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL * reports. hysteresisDlKbps must be smaller than the smallest threshold * delta. A value of 0 disables hysteresis. * @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL * reports. hysteresisUlKbps must be smaller than the smallest threshold * delta. A value of 0 disables hysteresis. * @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A * vector size of 0 disables the use of DL thresholds for * reporting. * @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A * vector size of 0 disables the use of UL thresholds for reporting. * @param ran The type of network for which to apply these thresholds. */ oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs, int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps, vec<int32_t> thresholdsUplinkKbps, RadioAccessNetworks ran); };
radio/1.2/IRadioIndication.hal +16 −0 Original line number Diff line number Diff line Loading @@ -37,4 +37,20 @@ interface IRadioIndication extends @1.1::IRadioIndication { * @param records Current cell information known to radio */ oneway cellInfoList_1_2(RadioIndicationType type, vec<CellInfo> records); /** * Indicates current link capacity estimate. * * This replaces @1.0::IRadioIndication.lceData(). The framework must be able to handle * either this function or @1.0::IRadioIndication.lceData(). Implementations supporting * v1.2 must call this function instead of lceData(). * * This indication is sent whenever the reporting criteria, as set by * @1.2::IRadio.setLinkCapacityReportingCriteria, are met and the indication is not * suppressed by @1.2::IRadio.setIndicationFilter_1_2(). * * @param type Type of radio indication * @param lce LinkCapacityEstimate information as defined in types.hal */ oneway currentLinkCapacityEstimate(RadioIndicationType type, LinkCapacityEstimate lce); };
radio/1.2/IRadioResponse.hal +22 −0 Original line number Diff line number Diff line Loading @@ -50,4 +50,26 @@ interface IRadioResponse extends @1.1::IRadioResponse { * RadioError:NONE */ oneway getIccCardStatusResponse_1_2(RadioResponseInfo info, CardStatus cardStatus); /** * @param info Response info struct containing response type, serial no. and error * * Valid errors returned: * RadioError:NONE * RadioError:INVALID_ARGUMENTS * RadioError:RADIO_NOT_AVAILABLE * RadioError:INTERNAL_ERR */ oneway setSignalStrengthReportingCriteriaResponse(RadioResponseInfo info); /** * @param info Response info struct containing response type, serial no. and error * * Valid errors returned: * RadioError:NONE * RadioError:INVALID_ARGUMENTS * RadioError:RADIO_NOT_AVAILABLE * RadioError:INTERNAL_ERR */ oneway setLinkCapacityReportingCriteriaResponse(RadioResponseInfo info); };
radio/1.2/types.hal +51 −0 Original line number Diff line number Diff line Loading @@ -64,6 +64,46 @@ enum IncrementalResultsPeriodicityRange : int32_t { MAX = 10, }; /** * Overwritten from @1.0::IndicationFilter in order to redefine ALL. In the future, this should * be extended instead of overwritten. */ enum IndicationFilter : int32_t { NONE = 0, ALL = ~0, /** * When this bit is set, modem must send the signal strength update through * IRadioIndication.currentSignalStrength() when all criteria specified by * IRadio.setSignalStrengthReportingCriteria() are met. */ SIGNAL_STRENGTH = 1 << 0, /** * When this bit is set, modem must invoke IRadioIndication.networkStateChanged() when any field * in VoiceRegStateResult or DataRegStateResult changes. When this bit is not set, modem must * suppress IRadioIndication.networkStateChanged() when there are only changes from * insignificant fields. Modem must invoke IRadioIndication.networkStateChanged() when * significant fields are updated regardless of whether this bit is set. * * The following fields are considered significant: VoiceRegStateResult.regState, * VoiceRegStateResult.rat, DataRegStateResult.regState, DataRegStateResult.rat. */ FULL_NETWORK_STATE = 1 << 1, /** * When this bit is set, modem must send IRadioIndication.dataCallListChanged() whenever any * field in ITypes.SetupDataCallResult changes. When this bit is not set, modem must suppress * the indication when the only changed field is 'active' (for data dormancy). For all other * field changes, the modem must send IRadioIndication.dataCallListChanged() regardless of * whether this bit is set. */ DATA_CALL_DORMANCY_CHANGED = 1 << 2, /** * When this bit is set, modem must send the link capacity update through * IRadioIndication.currentLinkCapacityEstimate() when all criteria specified by * IRadio.setLinkCapacityReportingCriteria() are met. */ LINK_CAPACITY_ESTIMATE = 1 << 3, }; struct NetworkScanRequest { ScanType type; Loading Loading @@ -244,3 +284,14 @@ struct CardStatus { */ string iccid; }; struct LinkCapacityEstimate { /** * Estimated downlink capacity in kbps. */ uint32_t downlinkCapacityKbps; /** * Estimated uplink capacity in kbps. */ uint32_t uplinkCapacityKbps; };
