Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6ef7a20d authored by Shrikar Amirisetty's avatar Shrikar Amirisetty Committed by Android (Google) Code Review
Browse files

Merge "Added info to docs to answer Q20 from Ford pending questions." into udc-dev

parents cdd964a8 0eca9c3d

automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl

+62 −30
Original line number Diff line number Diff line
@@ -428,10 +428,10 @@ enum VehicleProperty { 
     *

     * Each tires is identified by its areaConfig.areaId config and their

     * minFloatValue/maxFloatValue are used to store OEM recommended pressure

     * range.

     * The Min value in the areaConfig data represents the lower bound of

     * range. The minFloatValue and maxFloatValue in VehicleAreaConfig must be defined.

     * The minFloatValue in the areaConfig data represents the lower bound of

     * the recommended tire pressure.

     * The Max value in the areaConfig data represents the upper bound of

     * The maxFloatValue in the areaConfig data represents the upper bound of

     * the recommended tire pressure.

     * For example:

     * The following areaConfig indicates the recommended tire pressure
@@ -700,6 +700,14 @@ enum VehicleProperty { 
     *

     * Fan speed setting

     *

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * All integers between minInt32Value and maxInt32Value must be supported.

     *

     * The minInt32Value indicates the lowest fan speed.

     * The maxInt32Value indicates the highest fan speed.

     *

     * This property is not in any particular unit but in a specified range of relative speeds.

     *

     * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to

     * implement it as VehiclePropertyAccess.READ only.

     *
@@ -898,13 +906,15 @@ enum VehicleProperty { 
    /**

     * Seat heating/cooling

     *

     * Negative values indicate cooling.

     * 0 indicates off.

     * Positive values indicate heating.

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * All integers between minInt32Value and maxInt32Value must be supported.

     *

     * The maxInt32Value indicates the maximum seat temperature heating setting.

     * The minInt32Value must be 0, unless the vehicle supports seat cooling as well. In this case,

     * minInt32Value indicates the maximum seat temperature cooling setting.

     *

     * Some vehicles may have multiple levels of heating and cooling. The

     * min/max range defines the allowable range and number of steps in each

     * direction.

     * This property is not in any particular unit, but in a specified range of relative temperature

     * settings.

     *

     * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to

     * implement it as VehiclePropertyAccess.READ only.
@@ -918,8 +928,15 @@ enum VehicleProperty { 
     * Side Mirror Heat

     *

     * Increasing values denote higher heating levels for side mirrors.

     * The Max value in the config data represents the highest heating level.

     * The Min value in the config data MUST be zero and indicates no heating.

     *

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * All integers between minInt32Value and maxInt32Value must be supported.

     *

     * The maxInt32Value in the config data represents the maximum heating level.

     * The minInt32Value in the config data MUST be zero and indicates no heating.

     *

     * This property is not in any particular unit but in a specified range of relative heating

     * settings.

     *

     * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to

     * implement it as VehiclePropertyAccess.READ only.
@@ -932,11 +949,16 @@ enum VehicleProperty { 
    /**

     * Steering Wheel Heating/Cooling

     *

     * Sets the amount of heating/cooling for the steering wheel

     * config data Min and Max MUST be set appropriately.

     * Positive value indicates heating.

     * Negative value indicates cooling.

     * 0 indicates temperature control is off.

     * Sets the amount of heating/cooling for the steering wheel.

     *

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * All integers between minInt32Value and maxInt32Value must be supported.

     *

     * The maxInt32Value indicates the maximum steering wheel heating setting.

     * The minInt32Value should be 0, unless the vehicle supports steering wheel cooling as well. In

     * such a case, the minInt32Value indicates the maximum steering wheel cooling setting.

     *

     * This property is not in any particular unit but in a specified range of heating settings.

     *

     * This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to

     * implement it as VehiclePropertyAccess.READ only.
@@ -1061,8 +1083,14 @@ enum VehicleProperty { 
    /**

     * Seat ventilation

     *

     * 0 indicates off.

     * Positive values indicates ventilation level.

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * All integers between minInt32Value and maxInt32Value must be supported.

     *

     * The minInt32Value must be 0.

     * The maxInt32Value indicates the maximum ventilation setting available for the seat.

     *

     * This property is not in any particular unit but in the specified range of ventilation

     * settings.

     *

     * Used by HVAC apps and Assistant to enable, change, or read state of seat

     * ventilation.  This is different than seating cooling. It can be on at the
@@ -1823,13 +1851,14 @@ enum VehicleProperty { 
    /**

     * Seat memory select

     *

     * This parameter selects the memory preset to use to select the seat

     * position. The minValue is always 0, and the maxValue determines the

     * number of seat preset memory slots available (i.e. numSeatPresets - 1).

     * This parameter selects the memory preset to use to select the seat position. The

     * maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between

     * minInt32Value and maxInt32Value must be supported. The minInt32Value is always 0, and the

     * maxInt32Value determines the number of seat preset memory slots available (i.e.

     * numSeatPresets - 1).

     *

     * For instance, if the driver's seat has 3 memory presets, the maxValue

     * will be 2. When the user wants to select a preset, the desired preset

     * number (0, 1, or 2) is set.

     * For instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When

     * the user wants to select a preset, the desired preset number (0, 1, or 2) is set.

     *

     * @change_mode VehiclePropertyChangeMode.ON_CHANGE

     * @access VehiclePropertyAccess.WRITE
@@ -1839,9 +1868,10 @@ enum VehicleProperty { 
    /**

     * Seat memory set

     *

     * This setting allows the user to save the current seat position settings

     * into the selected preset slot.  The maxValue for each seat position

     * must match the maxValue for SEAT_MEMORY_SELECT.

     * This setting allows the user to save the current seat position settings into the selected

     * preset slot. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The

     * minInt32Value must be 0, and the maxInt32Value for each seat position must match the

     * maxInt32Value for SEAT_MEMORY_SELECT.

     *

     * @change_mode VehiclePropertyChangeMode.ON_CHANGE

     * @access VehiclePropertyAccess.WRITE
@@ -2807,8 +2837,9 @@ enum VehicleProperty { 
     * When an intermittent wiper setting is selected, this property value must be set to 0 during

     * the "pause" period of the intermittent wiping.

     *

     * The maxInt32Value for each area ID must specify the longest wiper period. The minInt32Value

     * must be set to 0 for each area ID.

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The maxInt32Value

     * for each area ID must specify the longest wiper period. The minInt32Value must be set to 0

     * for each area ID.

     *

     * @change_mode VehiclePropertyChangeMode.ON_CHANGE

     * @access VehiclePropertyAccess.READ
@@ -4775,7 +4806,7 @@ enum VehicleProperty { 
    /**

     * Current target speed for Cruise Control (CC).

     *

     * OEMs should set the minInt32Value and maxInt32Value values for this property to define the

     * OEMs should set the minFloatValue and maxFloatValue values for this property to define the

     * min and max target speed values. These values must be non-negative.

     *

     * The maxFloatValue represents the upper bound of the target speed.
@@ -4824,6 +4855,7 @@ enum VehicleProperty { 
     * Returns the measured distance in millimeters between the rear-most point of the leading

     * vehicle and the front-most point of the ACC vehicle.

     *

     * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.

     * The minInt32Value should be 0.

     * The maxInt32Value should be populated with the maximum range the distance sensor can support.

     * This value should be non-negative.