Merge "p2p: add new HAL API to pass vendor-specific data"

  void stopFind();

  void findOnSocialChannels(in int timeoutInSec);

  void findOnSpecificFrequency(in int freqInHz, in int timeoutInSec);

  void setVendorElements(in android.hardware.wifi.supplicant.P2pFrameTypeMask frameTypeMask, in byte[] vendorElemBytes);

}

  oneway void onStaAuthorized(in byte[] srcAddress, in byte[] p2pDeviceAddress);

  oneway void onStaDeauthorized(in byte[] srcAddress, in byte[] p2pDeviceAddress);

  oneway void onGroupFrequencyChanged(in String groupIfname, in int frequency);

  oneway void onDeviceFoundWithVendorElements(in byte[] srcAddress, in byte[] p2pDeviceAddress, in byte[] primaryDeviceType, in String deviceName, in android.hardware.wifi.supplicant.WpsConfigMethods configMethods, in byte deviceCapabilities, in android.hardware.wifi.supplicant.P2pGroupCapabilityMask groupCapabilities, in byte[] wfdDeviceInfo, in byte[] wfdR2DeviceInfo, in byte[] vendorElemBytes);

}

/*

 * Copyright (C) 2022 The Android Open Source Project

 *

 * Licensed under the Apache License, Version 2.0 (the "License");

 * you may not use this file except in compliance with the License.

 * You may obtain a copy of the License at

 *

 *      http://www.apache.org/licenses/LICENSE-2.0

 *

 * Unless required by applicable law or agreed to in writing, software

 * distributed under the License is distributed on an "AS IS" BASIS,

 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

 * See the License for the specific language governing permissions and

 * limitations under the License.

 */

///////////////////////////////////////////////////////////////////////////////

// THIS FILE IS IMMUTABLE. DO NOT EDIT IN ANY CASE.                          //

///////////////////////////////////////////////////////////////////////////////

// This file is a snapshot of an AIDL file. Do not edit it manually. There are

// two cases:

// 1). this is a frozen version file - do not edit this in any case.

// 2). this is a 'current' file. If you make a backwards compatible change to

//     the interface (from the latest frozen version), the build system will

//     prompt you to update this file with `m <name>-update-api`.

//

// You must not make a backward incompatible change to any AIDL file built

// with the aidl_interface module type with versions property set. The module

// type is used to build AIDL files in a way that they can be used across

// independently updatable components of the system. If a device is shipped

// with such a backward incompatible change, it has a high risk of breaking

// later when a module using the interface is updated, e.g., Mainline modules.

package android.hardware.wifi.supplicant;

@Backing(type="int") @VintfStability

enum P2pFrameTypeMask {

  P2P_FRAME_PROBE_REQ_P2P = 1,

  P2P_FRAME_PROBE_RESP_P2P = 2,

  P2P_FRAME_PROBE_RESP_P2P_GO = 4,

  P2P_FRAME_BEACON_P2P_GO = 8,

  P2P_FRAME_P2P_PD_REQ = 16,

  P2P_FRAME_P2P_PD_RESP = 32,

  P2P_FRAME_P2P_GO_NEG_REQ = 64,

  P2P_FRAME_P2P_GO_NEG_RESP = 128,

  P2P_FRAME_P2P_GO_NEG_CONF = 256,

  P2P_FRAME_P2P_INV_REQ = 512,

  P2P_FRAME_P2P_INV_RESP = 1024,

  P2P_FRAME_P2P_ASSOC_REQ = 2048,

  P2P_FRAME_P2P_ASSOC_RESP = 4096,

}

import android.hardware.wifi.supplicant.ISupplicantP2pNetwork;

import android.hardware.wifi.supplicant.IfaceType;

import android.hardware.wifi.supplicant.MiracastMode;

import android.hardware.wifi.supplicant.P2pFrameTypeMask;

import android.hardware.wifi.supplicant.P2pGroupCapabilityMask;

import android.hardware.wifi.supplicant.WpsConfigMethods;

import android.hardware.wifi.supplicant.WpsProvisionMethod;

     *         |SupplicantStatusCode.FAILURE_IFACE_DISABLED|

     */

    void findOnSpecificFrequency(in int freqInHz, in int timeoutInSec);

    /**

     * Set vendor-specific information elements to P2P frames.

     *

     * @param frameTypeMask The bit mask of P2P frame type represented by

     *         P2pFrameTypeMask.

     * @param vendorElemBytes Vendor-specific information element bytes. The format of an

     *         information element is EID (1 byte) + Length (1 Byte) + Payload which is

     *         defined in Section 9.4.4 TLV encodings of 802.11-2016 IEEE Standard for

     *         Information technology. The length indicates the size of the payload.

     *         Multiple information elements may be appended within the byte array.

     * @throws ServiceSpecificException with one of the following values:

     *         |SupplicantStatusCode.FAILURE_UNKNOWN|,

     *         |SupplicantStatusCode.FAILURE_IFACE_INVALID|

     */

    void setVendorElements(in P2pFrameTypeMask frameTypeMask, in byte[] vendorElemBytes);

}

     * @param frequency New operating frequency in MHz.

     */

    oneway void onGroupFrequencyChanged(in String groupIfname, in int frequency);

    /**

     * Used to indicate that a P2P device has been found.

     *

     * @param srcAddress MAC address of the device found. This must either

     *        be the P2P device address for a peer which is not in a group,

     *        or the P2P interface address for a peer which is a Group Owner.

     * @param p2pDeviceAddress P2P device address.

     * @param primaryDeviceType Type of device. Refer to section B.1 of Wifi P2P

     *        Technical specification v1.2.

     * @param deviceName Name of the device.

     * @param configMethods Mask of WPS configuration methods supported by the

     *        device.

     * @param deviceCapabilities Refer to section 4.1.4 of Wifi P2P Technical

     *        specification v1.2.

     * @param groupCapabilites Refer to section 4.1.4 of Wifi P2P Technical

     *        specification v1.2.

     * @param wfdDeviceInfo WFD device info as described in section 5.1.2 of WFD

     *        technical specification v1.0.0.

     * @param wfdR2DeviceInfo WFD R2 device info as described in section 5.1.12 of WFD

     *        technical specification v2.1.

     * @param vendorElemBytes Vendor-specific information element bytes. The format of an

     *         information element is EID (1 byte) + Length (1 Byte) + Payload which is

     *         defined in Section 9.4.4 TLV encodings of 802.11-2016 IEEE Standard for

     *         Information technology. The length indicates the size of the payload.

     *         Multiple information elements may be appended within the byte array.

     */

    oneway void onDeviceFoundWithVendorElements(in byte[] srcAddress, in byte[] p2pDeviceAddress,

            in byte[] primaryDeviceType, in String deviceName, in WpsConfigMethods configMethods,

            in byte deviceCapabilities, in P2pGroupCapabilityMask groupCapabilities,

            in byte[] wfdDeviceInfo, in byte[] wfdR2DeviceInfo, in byte[] vendorElemBytes);

}