Merge "supplicant(interface): Add the new radio work methods" (4aceb63b) · Commits · e / os / android_hardware_interfaces

wifi/supplicant/1.0/ISupplicantIface.hal

+13 −0

Original line number	Diff line number	Diff line
		@@ -137,6 +137,19 @@ interface ISupplicantIface {
		*/
		setWpsDeviceName(string name) generates (SupplicantStatus status);

		/**
		* Set the device type for WPS operations.
		*
		* @parm type Type of device. Refer to section B.1 of Wifi P2P
		* Technical specification v1.2.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		setWpsDeviceType(uint8_t[8] type) generates (SupplicantStatus status);

		/**
		* Set the manufacturer for WPS operations.
		* The manufacturer of the device (up to \|WPS_MANUFACTURER_MAX_LEN\| ASCII

wifi/supplicant/1.0/ISupplicantStaIface.hal

+55 −0

Original line number	Diff line number	Diff line
		@@ -67,6 +67,10 @@ interface ISupplicantStaIface extends ISupplicantIface {
		SENSE = 2
		};

		enum ExtRadioWorkDefaults : uint32_t {
		TIMEOUT_IN_SECS = 10
		};

		/**
		* Register for callbacks from this interface.
		*
		@@ -405,4 +409,55 @@ interface ISupplicantStaIface extends ISupplicantIface {
		* \|SupplicantStatusCode.FAILURE_IFACE_INVALID\|
		*/
		setExternalSim(bool useExternalSim) generates (SupplicantStatus status);

		/**
		* External programs can request supplicant to not start offchannel
		* operations during other tasks that may need exclusive control of the
		* radio.
		*
		* This method can be used to reserve a slot for radio access. If freq is
		* specified, other radio work items on the same channel can be completed in
		* parallel. Otherwise, all other radio work items are blocked during
		* execution. Timeout must be set to \|ExtRadioWorkDefaults.TIMEOUT_IN_SECS\|
		* seconds by default to avoid blocking supplicant operations on the iface
		* for excessive time. If a longer (or shorter) safety timeout is needed,
		* that may be specified with the optional timeout parameter. This command
		* returns an identifier for the radio work item.
		*
		* Once the radio work item has been started,
		* \|ISupplicant.onExtRadioWorkStart\| callback is indicated that the external
		* processing can start.
		*
		* @param name Name for the radio work being added.
		* @param freqInMhz Frequency to specify. Set to 0 for all channels.
		* @param timeoutInSec Timeout tospecify. Set to 0 for default timeout.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		* @return id Identifier for this radio work.
		*/
		addExtRadioWork(string name, uint32_t freqInMhz, uint32_t timeoutInSec)
		generates (SupplicantStatus status, uint32_t id);

		/**
		* Indicates to supplicant that the external radio work has completed.
		* This allows other radio works to be performed. If this method is not
		* invoked (e.g., due to the external program terminating), supplicant
		* must time out the radio work item on the iface and send
		* \|ISupplicantCallback.onExtRadioWorkTimeout\| event to indicate
		* that this has happened.
		*
		* This method may also be used to cancel items that have been scheduled
		* via \|addExtRadioWork\|, but have not yet been started (notified via
		* \|ISupplicantCallback.onExtRadioWorkStart\|).
		*
		* @return id Identifier generated for the radio work addition
		* (using \|addExtRadioWork\|).
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|
		*/
		removeExtRadioWork(uint32_t id) generates (SupplicantStatus status);
		};

wifi/supplicant/1.0/ISupplicantStaIfaceCallback.hal

+14 −0

Original line number	Diff line number	Diff line
		@@ -326,4 +326,18 @@ interface ISupplicantStaIfaceCallback {
		* Used to indicate the overlap of a WPS PBC connection attempt.
		*/
		oneway onWpsEventPbcOverlap();

		/**
		* Used to indicate that the external radio work can start now.
		*
		* @return id Identifier generated for the radio work request.
		*/
		oneway onExtRadioWorkStart(uint32_t id);

		/**
		* Used to indicate that the external radio work request has timed out.
		*
		* @return id Identifier generated for the radio work request.
		*/
		oneway onExtRadioWorkTimeout(uint32_t id);
		};

wifi/supplicant/1.0/ISupplicantStaNetwork.hal

+76 −2

Original line number	Diff line number	Diff line
		@@ -508,8 +508,30 @@ interface ISupplicantStaNetwork extends ISupplicantNetwork {
		*/
		setEapDomainSuffixMatch(string match)
		generates (SupplicantStatus status);

		/**
		* Get ID string set for this network.
		* This field can be used to enable proactive key caching which is also
		* known as opportunistic PMKSA caching for WPA2. This is disabled (0)
		* by default unless default value is changed with the global okc=1
		* parameter.
		*
		* Proactive key caching is used to make supplicant assume that the APs
		* are using the same PMK and generate PMKSA cache entries without
		* doing RSN pre-authentication. This requires support from the AP side
		* and is normally used with wireless switches that co-locate the
		* authenticator.
		*
		* @param enable true to set, false otherwise.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		setProactiveKeyCaching(bool enable) generates (SupplicantStatus status);

		/**
		* Set ID string for this network.
		* Network identifier string for external scripts.
		*
		* @return idStr ID string value to set.
		@@ -522,6 +544,20 @@ interface ISupplicantStaNetwork extends ISupplicantNetwork {
		*/
		setIdStr(string idStr) generates (SupplicantStatus status);

		/**
		* Set PPS MO ID for this network.
		* (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
		*
		* @return id ID value to set.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_ARGS_INVALID\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		setUpdateIdentifier(uint32_t id) generates (SupplicantStatus status);

		/**
		* Getters for the various network params.
		*/
		@@ -912,9 +948,21 @@ interface ISupplicantStaNetwork extends ISupplicantNetwork {
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		sendNetworkEapSimGsmAuthResponse(NetworkResponseEapSimGsmAuthParams params)
		sendNetworkEapSimGsmAuthResponse(vec<NetworkResponseEapSimGsmAuthParams> params)
		generates (SupplicantStatus status);

		/**
		* Used to send a response to the
		* \|ISupplicantNetworkCallback.onNetworkEapSimGsmAuthRequest\| request.
		*
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		sendNetworkEapSimGsmAuthFailure() generates (SupplicantStatus status);

		/**
		* Used to send a response to the
		* \|ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest\| request.
		@@ -929,6 +977,32 @@ interface ISupplicantStaNetwork extends ISupplicantNetwork {
		sendNetworkEapSimUmtsAuthResponse(NetworkResponseEapSimUmtsAuthParams params)
		generates (SupplicantStatus status);

		/**
		* Used to send a response to the
		* \|ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest\| request.
		*
		* @param auts Params to be used for EAP UMTS authentication.
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		sendNetworkEapSimUmtsAutsResponse(uint8_t[14] auts)
		generates (SupplicantStatus status);

		/**
		* Used to send a response to the
		* \|ISupplicantNetworkCallback.onNetworkEapSimUmtsAuthRequest\| request.
		*
		* @return status Status of the operation.
		* Possible status codes:
		* \|SupplicantStatusCode.SUCCESS\|,
		* \|SupplicantStatusCode.FAILURE_UNKNOWN\|,
		* \|SupplicantStatusCode.FAILURE_NETWORK_INVALID\|
		*/
		sendNetworkEapSimUmtsAuthFailure() generates (SupplicantStatus status);

		/**
		* Used to send a response to the
		* \|ISupplicantNetworkCallback.onNetworkEapIdentityRequest\| request.