Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0cb21f39 authored by Sooraj Sasindran's avatar Sooraj Sasindran Committed by Gerrit Code Review
Browse files

Merge "Use 0 as link capacity estimate if device is not connected"

parents 9d38b91d 6e9d3413

radio/1.6/types.hal

+4 −4
Original line number Diff line number Diff line
@@ -408,7 +408,7 @@ struct LinkCapacityEstimate { 
    * the estimated maximum sustainable link bandwidth (as would be measured

    * at the Upper PDCP or SNDCP SAP). If the DL Aggregate Maximum Bit Rate is known,

    * this value shall not exceed the DL-AMBR for the Internet PDN connection.

    * This must be filled with -1 if network is not connected.

    * This must be filled with 0 if network is not connected.

    */

   uint32_t downlinkCapacityKbps;
@@ -418,7 +418,7 @@ struct LinkCapacityEstimate { 
    * estimated maximum sustainable link bandwidth (as would be measured at the

    * Upper PDCP or SNDCP SAP). If the UL Aggregate Maximum Bit Rate is known,

    * this value shall not exceed the UL-AMBR for the Internet PDN connection.

    * This must be filled with -1 if network is not connected.

    * This must be filled with 0 if network is not connected.

    */

   uint32_t uplinkCapacityKbps;
@@ -427,7 +427,7 @@ struct LinkCapacityEstimate { 
    * This bandwidth estimate shall be the estimated maximum sustainable link bandwidth

    * (as would be measured at the Upper PDCP or SNDCP SAP). This is valid only

    * in if device is connected to both primary and secodary in dual connected

    * mode. This must be filled with -1 if secondary is not connected or if

    * mode. This must be filled with 0 if secondary is not connected or if

    * modem does not support this feature.

    */

   uint32_t secondaryDownlinkCapacityKbps;
@@ -437,7 +437,7 @@ struct LinkCapacityEstimate { 
    * This bandwidth estimate shall be the estimated

    * maximum sustainable link bandwidth (as would be measured at the Upper PDCP or SNDCP SAP).

    * This is valid only in if device is connected to both primary and secodary in dual connected

    * mode.This must be filled with -1 if secondary is not connected or if modem

    * mode.This must be filled with 0 if secondary is not connected or if modem

    * does not support this feature.

    */

   uint32_t secondaryUplinkCapacityKbps;