Loading radio/1.3/Android.bp 0 → 100644 +24 −0 Original line number Original line Diff line number Diff line // This file is autogenerated by hidl-gen -Landroidbp. hidl_interface { name: "android.hardware.radio@1.3", root: "android.hardware", vndk: { enabled: true, }, srcs: [ "types.hal", "IRadio.hal", ], interfaces: [ "android.hardware.radio@1.0", "android.hardware.radio@1.1", "android.hardware.radio@1.2", "android.hidl.base@1.0", ], types: [ "AccessNetwork", ], gen_java: true, } radio/1.3/IRadio.hal 0 → 100644 +85 −0 Original line number Original line Diff line number Diff line /* * Copyright (C) 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.radio@1.3; import @1.0::DataProfileInfo; import @1.2::DataRequestReason; import @1.2::IRadio; import @1.3::AccessNetwork; /** * This interface is used by telephony and telecom to talk to cellular radio. * All the functions have minimum one parameter: * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the * duration of a method call. If clients provide colliding serials (including passing the same * serial to different methods), multiple responses (one for each method call) must still be served. * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication. */ interface IRadio extends @1.2::IRadio { /** * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE, * the data connection must be added to data calls and a unsolDataCallListChanged() must be * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be * lost due to many factors, including deactivateDataCall() being issued, the radio powered * off, reception lost or even transient factors like congestion. This data call list is * returned by getDataCallList() and dataCallListChanged(). * * The Radio is expected to: * - Create one data call context. * - Create and configure a dedicated interface for the context. * - The interface must be point to point. * - The interface is configured with one or more addresses and is capable of sending and * receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128 * for IPv6. * - Must not modify routing configuration related to this interface; routing management is * exclusively within the purview of the Android OS. * - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified * in the response of getDataRegistrationState. * * @param serial Serial number of request. * @param accessNetwork The access network to setup the data call. If the data connection cannot * be established on the specified access network, the setup request must be failed. * @param dataProfileInfo Data profile info. * @param modemCognitive Indicates that the requested profile has previously been provided via * setDataProfile(). * @param roamingAllowed Indicates whether or not data roaming is allowed by the user. * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for * a roaming network. The 'protocol' parameter in the old RIL API must be filled * accordingly based on the roaming condition. Note this is for backward compatibility with * the old radio modem. The modem must not use this param for any other reason. * @param reason The request reason. Must be DataRequestReason.NORMAL or * DataRequestReason.HANDOVER. * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link * addresses of the existing data connection. The format is IP address with optional "/" * prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3", * "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If * the prefix length is absent, then the addresses are assumed to be point to point with * IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored * unless reason is DataRequestReason.HANDOVER. * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS * addresses of the existing data connection. The format is defined in RFC-4291 section * 2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless * reason is DataRequestReason.HANDOVER. * * Response function is IRadioResponse.setupDataCallResponse() * * Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param. */ oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork, DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed, bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses); }; radio/1.3/types.hal 0 → 100644 +26 −0 Original line number Original line Diff line number Diff line /* * Copyright (C) 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.radio@1.3; import @1.2::AccessNetwork; enum AccessNetwork : @1.2::AccessNetwork { /** * Unknown access network */ UNKNOWN = 0, }; Loading
radio/1.3/Android.bp 0 → 100644 +24 −0 Original line number Original line Diff line number Diff line // This file is autogenerated by hidl-gen -Landroidbp. hidl_interface { name: "android.hardware.radio@1.3", root: "android.hardware", vndk: { enabled: true, }, srcs: [ "types.hal", "IRadio.hal", ], interfaces: [ "android.hardware.radio@1.0", "android.hardware.radio@1.1", "android.hardware.radio@1.2", "android.hidl.base@1.0", ], types: [ "AccessNetwork", ], gen_java: true, }
radio/1.3/IRadio.hal 0 → 100644 +85 −0 Original line number Original line Diff line number Diff line /* * Copyright (C) 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.radio@1.3; import @1.0::DataProfileInfo; import @1.2::DataRequestReason; import @1.2::IRadio; import @1.3::AccessNetwork; /** * This interface is used by telephony and telecom to talk to cellular radio. * All the functions have minimum one parameter: * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the * duration of a method call. If clients provide colliding serials (including passing the same * serial to different methods), multiple responses (one for each method call) must still be served. * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication. */ interface IRadio extends @1.2::IRadio { /** * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE, * the data connection must be added to data calls and a unsolDataCallListChanged() must be * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be * lost due to many factors, including deactivateDataCall() being issued, the radio powered * off, reception lost or even transient factors like congestion. This data call list is * returned by getDataCallList() and dataCallListChanged(). * * The Radio is expected to: * - Create one data call context. * - Create and configure a dedicated interface for the context. * - The interface must be point to point. * - The interface is configured with one or more addresses and is capable of sending and * receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128 * for IPv6. * - Must not modify routing configuration related to this interface; routing management is * exclusively within the purview of the Android OS. * - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified * in the response of getDataRegistrationState. * * @param serial Serial number of request. * @param accessNetwork The access network to setup the data call. If the data connection cannot * be established on the specified access network, the setup request must be failed. * @param dataProfileInfo Data profile info. * @param modemCognitive Indicates that the requested profile has previously been provided via * setDataProfile(). * @param roamingAllowed Indicates whether or not data roaming is allowed by the user. * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for * a roaming network. The 'protocol' parameter in the old RIL API must be filled * accordingly based on the roaming condition. Note this is for backward compatibility with * the old radio modem. The modem must not use this param for any other reason. * @param reason The request reason. Must be DataRequestReason.NORMAL or * DataRequestReason.HANDOVER. * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link * addresses of the existing data connection. The format is IP address with optional "/" * prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3", * "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If * the prefix length is absent, then the addresses are assumed to be point to point with * IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored * unless reason is DataRequestReason.HANDOVER. * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS * addresses of the existing data connection. The format is defined in RFC-4291 section * 2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless * reason is DataRequestReason.HANDOVER. * * Response function is IRadioResponse.setupDataCallResponse() * * Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param. */ oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork, DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed, bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses); };
radio/1.3/types.hal 0 → 100644 +26 −0 Original line number Original line Diff line number Diff line /* * Copyright (C) 2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.radio@1.3; import @1.2::AccessNetwork; enum AccessNetwork : @1.2::AccessNetwork { /** * Unknown access network */ UNKNOWN = 0, };
