Merge "SurfaceFlinger: setGeometryAppliesWithResize crop latching fixes." into oc-dev (0f755fda) · Commits · e / os / android_frameworks_native-old

services/surfaceflinger/Layer.cpp

+44 −13

Original line number	Original line	Diff line number	Diff line
	@@ -103,7 +103,7 @@ Layer::Layer(SurfaceFlinger* flinger, const sp<Client>& client,
	mLastFrameNumberReceived(0),		mLastFrameNumberReceived(0),
	mUpdateTexImageFailed(false),		mUpdateTexImageFailed(false),
	mAutoRefresh(false),		mAutoRefresh(false),
	mFreezePositionUpdates(false)		mFreezeGeometryUpdates(false)
	{		{
	#ifdef USE_HWC2		#ifdef USE_HWC2
	ALOGV("Creating Layer %s", name.string());		ALOGV("Creating Layer %s", name.string());
	@@ -131,6 +131,8 @@ Layer::Layer(SurfaceFlinger* flinger, const sp<Client>& client,
	mCurrentState.active.transform.set(0, 0);		mCurrentState.active.transform.set(0, 0);
	mCurrentState.crop.makeInvalid();		mCurrentState.crop.makeInvalid();
	mCurrentState.finalCrop.makeInvalid();		mCurrentState.finalCrop.makeInvalid();
			mCurrentState.requestedFinalCrop = mCurrentState.finalCrop;
			mCurrentState.requestedCrop = mCurrentState.crop;
	mCurrentState.z = 0;		mCurrentState.z = 0;
	#ifdef USE_HWC2		#ifdef USE_HWC2
	mCurrentState.alpha = 1.0f;		mCurrentState.alpha = 1.0f;
	@@ -1636,12 +1638,25 @@ uint32_t Layer::doTransaction(uint32_t flags) {
	}		}
	}		}

	// always set active to requested, unless we're asked not to		// Here we apply various requested geometry states, depending on our
	// this is used by Layer, which special cases resizes.		// latching configuration. See Layer.h for a detailed discussion of
	if (flags & eDontUpdateGeometryState) {		// how geometry latching is controlled.
	} else {		if (!(flags & eDontUpdateGeometryState)) {
	Layer::State& editCurrentState(getCurrentState());		Layer::State& editCurrentState(getCurrentState());
	if (mFreezePositionUpdates) {
			// If mFreezeGeometryUpdates is true we are in the setGeometryAppliesWithResize
			// mode, which causes attributes which normally latch regardless of scaling mode,
			// to be delayed. We copy the requested state to the active state making sure
			// to respect these rules (again see Layer.h for a detailed discussion).
			//
			// There is an awkward asymmetry in the handling of the crop states in the position
			// states, as can be seen below. Largely this arises from position and transform
			// being stored in the same data structure while having different latching rules.
			// b/38182305
			//
			// Careful that "c" and editCurrentState may not begin as equivalent due to
			// applyPendingStates in the presence of deferred transactions.
			if (mFreezeGeometryUpdates) {
	float tx = c.active.transform.tx();		float tx = c.active.transform.tx();
	float ty = c.active.transform.ty();		float ty = c.active.transform.ty();
	c.active = c.requested;		c.active = c.requested;
	@@ -1650,6 +1665,14 @@ uint32_t Layer::doTransaction(uint32_t flags) {
	} else {		} else {
	editCurrentState.active = editCurrentState.requested;		editCurrentState.active = editCurrentState.requested;
	c.active = c.requested;		c.active = c.requested;
			if (c.crop != c.requestedCrop \|\|
			c.finalCrop != c.requestedFinalCrop) {
			c.sequence++;
			c.crop = c.requestedCrop;
			c.finalCrop = c.requestedFinalCrop;
			editCurrentState.crop = c.crop;
			editCurrentState.finalCrop = c.finalCrop;
			}
	}		}
	}		}

	@@ -1702,10 +1725,14 @@ bool Layer::setPosition(float x, float y, bool immediate) {
	// we want to apply the position portion of the transform matrix immediately,		// we want to apply the position portion of the transform matrix immediately,
	// but still delay scaling when resizing a SCALING_MODE_FREEZE layer.		// but still delay scaling when resizing a SCALING_MODE_FREEZE layer.
	mCurrentState.requested.transform.set(x, y);		mCurrentState.requested.transform.set(x, y);
	if (immediate && !mFreezePositionUpdates) {		if (immediate && !mFreezeGeometryUpdates) {
			// Here we directly update the active state
			// unlike other setters, because we store it within
			// the transform, but use different latching rules.
			// b/38182305
	mCurrentState.active.transform.set(x, y);		mCurrentState.active.transform.set(x, y);
	}		}
	mFreezePositionUpdates = mFreezePositionUpdates \|\| !immediate;		mFreezeGeometryUpdates = mFreezeGeometryUpdates \|\| !immediate;

	mCurrentState.modified = true;		mCurrentState.modified = true;
	setTransactionFlags(eTransactionNeeded);		setTransactionFlags(eTransactionNeeded);
	@@ -1828,26 +1855,30 @@ bool Layer::setFlags(uint8_t flags, uint8_t mask) {
	}		}

	bool Layer::setCrop(const Rect& crop, bool immediate) {		bool Layer::setCrop(const Rect& crop, bool immediate) {
	if (mCurrentState.crop == crop)		if (mCurrentState.requestedCrop == crop)
	return false;		return false;
	mCurrentState.sequence++;		mCurrentState.sequence++;
	mCurrentState.requestedCrop = crop;		mCurrentState.requestedCrop = crop;
	if (immediate) {		if (immediate && !mFreezeGeometryUpdates) {
	mCurrentState.crop = crop;		mCurrentState.crop = crop;
	}		}
			mFreezeGeometryUpdates = mFreezeGeometryUpdates \|\| !immediate;

	mCurrentState.modified = true;		mCurrentState.modified = true;
	setTransactionFlags(eTransactionNeeded);		setTransactionFlags(eTransactionNeeded);
	return true;		return true;
	}		}

	bool Layer::setFinalCrop(const Rect& crop, bool immediate) {		bool Layer::setFinalCrop(const Rect& crop, bool immediate) {
	if (mCurrentState.finalCrop == crop)		if (mCurrentState.requestedFinalCrop == crop)
	return false;		return false;
	mCurrentState.sequence++;		mCurrentState.sequence++;
	mCurrentState.requestedFinalCrop = crop;		mCurrentState.requestedFinalCrop = crop;
	if (immediate) {		if (immediate && !mFreezeGeometryUpdates) {
	mCurrentState.finalCrop = crop;		mCurrentState.finalCrop = crop;
	}		}
			mFreezeGeometryUpdates = mFreezeGeometryUpdates \|\| !immediate;

	mCurrentState.modified = true;		mCurrentState.modified = true;
	setTransactionFlags(eTransactionNeeded);		setTransactionFlags(eTransactionNeeded);
	return true;		return true;
	@@ -2137,7 +2168,7 @@ Region Layer::latchBuffer(bool& recomputeVisibleRegions, nsecs_t latchTime)
	bool queuedBuffer = false;		bool queuedBuffer = false;
	LayerRejecter r(mDrawingState, getCurrentState(), recomputeVisibleRegions,		LayerRejecter r(mDrawingState, getCurrentState(), recomputeVisibleRegions,
	getProducerStickyTransform() != 0, mName.string(),		getProducerStickyTransform() != 0, mName.string(),
	mOverrideScalingMode, mFreezePositionUpdates);		mOverrideScalingMode, mFreezeGeometryUpdates);
	status_t updateResult = mSurfaceFlingerConsumer->updateTexImage(&r,		status_t updateResult = mSurfaceFlingerConsumer->updateTexImage(&r,
	mFlinger->mPrimaryDispSync, &mAutoRefresh, &queuedBuffer,		mFlinger->mPrimaryDispSync, &mAutoRefresh, &queuedBuffer,
	mLastFrameNumberReceived);		mLastFrameNumberReceived);

services/surfaceflinger/Layer.h

+46 −7

Original line number	Original line	Diff line number	Diff line
	@@ -169,25 +169,64 @@ public:
	// the this layer's size and format		// the this layer's size and format
	status_t setBuffers(uint32_t w, uint32_t h, PixelFormat format, uint32_t flags);		status_t setBuffers(uint32_t w, uint32_t h, PixelFormat format, uint32_t flags);

	// modify current state		// ------------------------------------------------------------------------
			// Geometry setting functions.
			//
			// The following group of functions are used to specify the layers
			// bounds, and the mapping of the texture on to those bounds. According
			// to various settings changes to them may apply immediately, or be delayed until
			// a pending resize is completed by the producer submitting a buffer. For example
			// if we were to change the buffer size, and update the matrix ahead of the
			// new buffer arriving, then we would be stretching the buffer to a different
			// aspect before and after the buffer arriving, which probably isn't what we wanted.
			//
			// The first set of geometry functions are controlled by the scaling mode, described
			// in window.h. The scaling mode may be set by the client, as it submits buffers.
			// This value may be overriden through SurfaceControl, with setOverrideScalingMode.
			//
			// Put simply, if our scaling mode is SCALING_MODE_FREEZE, then
			// matrix updates will not be applied while a resize is pending
			// and the size and transform will remain in their previous state
			// until a new buffer is submitted. If the scaling mode is another value
			// then the old-buffer will immediately be scaled to the pending size
			// and the new matrix will be immediately applied following this scaling
			// transformation.

			// Set the default buffer size for the assosciated Producer, in pixels. This is
			// also the rendered size of the layer prior to any transformations. Parent
			// or local matrix transformations will not affect the size of the buffer,
			// but may affect it's on-screen size or clipping.
			bool setSize(uint32_t w, uint32_t h);
			// Set a 2x2 transformation matrix on the layer. This transform
			// will be applied after parent transforms, but before any final
			// producer specified transform.
			bool setMatrix(const layer_state_t::matrix22_t& matrix);

			// This second set of geometry attributes are controlled by
			// setGeometryAppliesWithResize, and their default mode is to be
			// immediate. If setGeometryAppliesWithResize is specified
			// while a resize is pending, then update of these attributes will
			// be delayed until the resize completes.

	// These members of state (position, crop, and finalCrop)		// setPosition operates in parent buffer space (pre parent-transform) or display
	// may be updated immediately or have the update delayed		// space for top-level layers.
	// until a pending surface resize completes (if applicable).
	bool setPosition(float x, float y, bool immediate);		bool setPosition(float x, float y, bool immediate);
			// Buffer space
	bool setCrop(const Rect& crop, bool immediate);		bool setCrop(const Rect& crop, bool immediate);
			// Parent buffer space/display space
	bool setFinalCrop(const Rect& crop, bool immediate);		bool setFinalCrop(const Rect& crop, bool immediate);

			// TODO(b/38182121): Could we eliminate the various latching modes by
			// using the layer hierarchy?
			// -----------------------------------------------------------------------
	bool setLayer(int32_t z);		bool setLayer(int32_t z);
	bool setRelativeLayer(const sp<IBinder>& relativeToHandle, int32_t relativeZ);		bool setRelativeLayer(const sp<IBinder>& relativeToHandle, int32_t relativeZ);

	bool setSize(uint32_t w, uint32_t h);
	#ifdef USE_HWC2		#ifdef USE_HWC2
	bool setAlpha(float alpha);		bool setAlpha(float alpha);
	#else		#else
	bool setAlpha(uint8_t alpha);		bool setAlpha(uint8_t alpha);
	#endif		#endif
	bool setMatrix(const layer_state_t::matrix22_t& matrix);
	bool setTransparentRegionHint(const Region& transparent);		bool setTransparentRegionHint(const Region& transparent);
	bool setFlags(uint8_t flags, uint8_t mask);		bool setFlags(uint8_t flags, uint8_t mask);
	bool setLayerStack(uint32_t layerStack);		bool setLayerStack(uint32_t layerStack);
	@@ -754,7 +793,7 @@ private:
	bool mUpdateTexImageFailed; // This is only accessed on the main thread.		bool mUpdateTexImageFailed; // This is only accessed on the main thread.

	bool mAutoRefresh;		bool mAutoRefresh;
	bool mFreezePositionUpdates;		bool mFreezeGeometryUpdates;

	// Child list about to be committed/used for editing.		// Child list about to be committed/used for editing.
	LayerVector mCurrentChildren;		LayerVector mCurrentChildren;

services/surfaceflinger/LayerRejecter.cpp

+2 −12

Original line number	Original line	Diff line number	Diff line
	@@ -37,7 +37,7 @@ LayerRejecter::LayerRejecter(Layer::State& front,
	mStickyTransformSet(stickySet),		mStickyTransformSet(stickySet),
	mName(name),		mName(name),
	mOverrideScalingMode(overrideScalingMode),		mOverrideScalingMode(overrideScalingMode),
	mFreezePositionUpdates(freezePositionUpdates) {}		mFreezeGeometryUpdates(freezePositionUpdates) {}

	bool LayerRejecter::reject(const sp<GraphicBuffer>& buf, const BufferItem& item) {		bool LayerRejecter::reject(const sp<GraphicBuffer>& buf, const BufferItem& item) {
	if (buf == NULL) {		if (buf == NULL) {
	@@ -115,17 +115,7 @@ bool LayerRejecter::reject(const sp<GraphicBuffer>& buf, const BufferItem& item)
	mRecomputeVisibleRegions = true;		mRecomputeVisibleRegions = true;
	}		}

	if (mFront.crop != mFront.requestedCrop) {		mFreezeGeometryUpdates = false;
	mFront.crop = mFront.requestedCrop;
	mCurrent.crop = mFront.requestedCrop;
	mRecomputeVisibleRegions = true;
	}
	if (mFront.finalCrop != mFront.requestedFinalCrop) {
	mFront.finalCrop = mFront.requestedFinalCrop;
	mCurrent.finalCrop = mFront.requestedFinalCrop;
	mRecomputeVisibleRegions = true;
	}
	mFreezePositionUpdates = false;

	return false;		return false;
	}		}

services/surfaceflinger/LayerRejecter.h

+2 −2

Original line number	Original line	Diff line number	Diff line
	@@ -40,7 +40,7 @@ namespace android {
	bool mStickyTransformSet;		bool mStickyTransformSet;
	const char *mName;		const char *mName;
	int32_t mOverrideScalingMode;		int32_t mOverrideScalingMode;
	bool &mFreezePositionUpdates;		bool &mFreezeGeometryUpdates;
	};		};
	} // namespace android		} // namespace android

services/surfaceflinger/tests/Transaction_test.cpp

+21 −0

Original line number	Original line	Diff line number	Diff line
	@@ -605,6 +605,27 @@ TEST_F(CropLatchingTest, FinalCropLatching) {
	EXPECT_CROPPED_STATE("after the resize finishes");		EXPECT_CROPPED_STATE("after the resize finishes");
	}		}

			TEST_F(CropLatchingTest, FinalCropLatchingRegressionForb37531386) {
			EXPECT_INITIAL_STATE("before anything");
			// In this scenario, we attempt to set the final crop a second time while the resize
			// is still pending, and ensure we are successful.
			SurfaceComposerClient::openGlobalTransaction();
			mFGSurfaceControl->setSize(128, 128);
			mFGSurfaceControl->setGeometryAppliesWithResize();
			mFGSurfaceControl->setFinalCrop(Rect(64, 64, 127, 127));
			SurfaceComposerClient::closeGlobalTransaction(true);

			SurfaceComposerClient::openGlobalTransaction();
			mFGSurfaceControl->setFinalCrop(Rect(0, 0, -1, -1));
			SurfaceComposerClient::closeGlobalTransaction(true);

			EXPECT_INITIAL_STATE("after setting crops with geometryAppliesWithResize");

			completeFGResize();

			EXPECT_INITIAL_STATE("after the resize finishes");
			}

	TEST_F(LayerUpdateTest, DeferredTransactionTest) {		TEST_F(LayerUpdateTest, DeferredTransactionTest) {
	sp<ScreenCapture> sc;		sp<ScreenCapture> sc;
	{		{