Move CM config options after AOSP config options

         note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" -->

    <string translatable="false" name="config_tether_apndata"></string>

    <!-- Boolean indicating whether Softap requires reloading AP firmware -->

    <bool name="config_wifiApFirmwareReload">true</bool>

    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->

    <bool translatable="false" name="config_wifi_dual_band_support">false</bool>

         Default value is 2 minutes. -->

    <integer translatable="false" name="config_wifi_driver_stop_delay">120000</integer>

    <!-- Boolean indicating whether the start command should be called on the wireless interface

         when starting the SoftAp -->

    <bool name="config_wifiApStartInterface">false</bool>

    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.

         Software implementation will be used if config_hardware_auto_brightness_available is not set -->

    <bool name="config_automatic_brightness_available">false</bool>

         a car dock make the accelerometer more a physical input (like a lid). -->

    <bool name="config_carDockEnablesAccelerometer">true</bool>

    <!-- Control whether a desk dock event should override the default bluetooth

         audio routing, FORCE_BT_DESK_DOCK, with an analog dock, FORCE_ANALOG_DOCK. -->

    <bool name="config_forceAnalogDeskDock">false</bool>

    <!-- Control whether a car dock event should override the default bluetooth

         audio routing, FORCE_BT_CAR_DOCK, with an analog dock, FORCE_ANALOG_DOCK. -->

    <bool name="config_forceAnalogCarDock">false</bool>

    <!-- Indicate whether the lid state impacts the accessibility of

         the physical keyboard.  0 means it doesn't, 1 means it is accessible

         when the lid is open, 2 means it is accessible when the lid is

    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->

    <bool name="config_intrusiveNotificationLed">false</bool>

    <!-- Is the battery LED intrusive? Used to decide if there should be a disable option -->

    <bool name="config_intrusiveBatteryLed">false</bool>

    <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors -->

    <bool name="config_multiColorBatteryLed">false</bool>

    <!-- Default value for LED off time when the battery is low on charge in miliseconds -->

    <integer name="config_notificationsBatteryLedOff">2875</integer>

    <!-- Diable lockscreen rotation by default -->

    <bool name="config_enableLockScreenRotation">false</bool>

    <!-- Is the device capable of hot swapping an UICC Card -->

    <bool name="config_hotswapCapable">false</bool>

    <!-- Enable puk unlockscreen by default.

         If unlock screen is disabled, the puk should be unlocked through Emergency Dialer -->

    <bool name="config_enable_puk_unlock_screen">true</bool>

    <integer-array name="config_autoBrightnessKeyboardBacklightValues">

    </integer-array>

    <integer name="config_buttonBrightnessSettingDefault">255</integer>

    <integer name="config_keyboardBrightnessSettingDefault">0</integer>

    <bool name="config_deviceHasVariableButtonBrightness">false</bool>

    <!-- Amount of time it takes for the light sensor to warm up in milliseconds.

         For this time after the screen turns on, the Power Manager

         will not debounce light sensor readings -->

        <item>com.android.location.fused</item>

    </string-array>

    <!-- Component name of the service providing geofence API support. -->

    <string name="config_geofenceProvider" translatable="false">com.qualcomm.services.location</string>

    <!-- Boolean indicating if current platform supports bluetooth SCO for off call

    use cases -->

    <bool name="config_bluetooth_sco_off_call">true</bool>

               cell broadcasting sms, and MMS. -->

    <bool name="config_sms_capable">true</bool>

    <!-- If this value is true, we handle Samsung CDMA's message ID method -->

    <bool name="config_smsSamsungCdmaAlternateMessageIDEncoding">false</bool>

    <!-- Enable/disable default bluetooth profiles:

        HSP_AG, ObexObjectPush, Audio, NAP -->

    <bool name="config_bluetooth_default_profiles">true</bool>

    <!-- The VoiceMail default value is displayed to my own number if it is true -->

    <bool name="config_telephony_use_own_number_for_voicemail">false</bool>

    <!-- Set additional audio parameters for incall audio

         Usage: parameter=onstring=offstring

         Examples: <item>realcall=on=off</item>

                   <item>dualmic_enabled=true=false</item>

                   <item>mic_boost=yes=no</item> -->

    <string-array name="config_telephony_set_audioparameters" translatable="false">

    </string-array>

    <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder.

         If false, decoded by Latin decoder. -->

    <bool name="config_sms_utf8_support">false</bool>

        <item>100</item>

    </integer-array>

    <!-- Vibrator pattern to be used as for notifications while alerts

         are disabled (e.g. during phone calls) if enabled by the user.

     -->

    <integer-array name="config_notificationNoAlertsVibePattern">

        <item>0</item>

        <item>50</item>

        <item>100</item>

        <item>50</item>

    </integer-array>

    <!-- Flag indicating if the speed up audio on mt call code should be executed -->

    <bool name="config_speed_up_audio_on_mt_calls">false</bool>

        <item>com.android.inputmethod.latin</item>

    </string-array>

    <!-- ********** PUT CM CONFIG OPTIONS AFTER THIS LINE ********** -->

    <!-- Boolean indicating whether Softap requires reloading AP firmware -->

    <bool name="config_wifiApFirmwareReload">true</bool>

    <!-- Boolean indicating whether the start command should be called on the wireless interface

         when starting the SoftAp -->

    <bool name="config_wifiApStartInterface">false</bool>

    <!-- Control whether a desk dock event should override the default bluetooth

         audio routing, FORCE_BT_DESK_DOCK, with an analog dock, FORCE_ANALOG_DOCK. -->

    <bool name="config_forceAnalogDeskDock">false</bool>

    <!-- Control whether a car dock event should override the default bluetooth

         audio routing, FORCE_BT_CAR_DOCK, with an analog dock, FORCE_ANALOG_DOCK. -->

    <bool name="config_forceAnalogCarDock">false</bool>

    <!-- Is the battery LED intrusive? Used to decide if there should be a disable option -->

    <bool name="config_intrusiveBatteryLed">false</bool>

    <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors -->

    <bool name="config_multiColorBatteryLed">false</bool>

    <!-- Is the device capable of hot swapping an UICC Card -->

    <bool name="config_hotswapCapable">false</bool>

    <integer name="config_buttonBrightnessSettingDefault">255</integer>

    <integer name="config_keyboardBrightnessSettingDefault">0</integer>

    <bool name="config_deviceHasVariableButtonBrightness">false</bool>

    <!-- Component name of the service providing geofence API support. -->

    <string name="config_geofenceProvider" translatable="false">com.qualcomm.services.location</string>

    <!-- If this value is true, we handle Samsung CDMA's message ID method -->

    <bool name="config_smsSamsungCdmaAlternateMessageIDEncoding">false</bool>

    <!-- Set additional audio parameters for incall audio

         Usage: parameter=onstring=offstring

         Examples: <item>realcall=on=off</item>

                   <item>dualmic_enabled=true=false</item>

                   <item>mic_boost=yes=no</item> -->

    <string-array name="config_telephony_set_audioparameters" translatable="false">

    </string-array>

    <!-- Vibrator pattern to be used as for notifications while alerts

         are disabled (e.g. during phone calls) if enabled by the user.

     -->

    <integer-array name="config_notificationNoAlertsVibePattern">

        <item>0</item>

        <item>50</item>

        <item>100</item>

        <item>50</item>

    </integer-array>

    <!-- True will enable the electron beam screen-off animation. -->

    <bool name="config_screenOffAnimation">true</bool>