Merge "Add a copy of lockClocks.sh from androidx"

#

# Copyright (C) 2018 The Android Open Source Project

#

# Licensed under the Apache License, Version 2.0 (the "License");

# you may not use this file except in compliance with the License.

# You may obtain a copy of the License at

#

#      http://www.apache.org/licenses/LICENSE-2.0

#

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

#

#################################################################

###

###  DO NOT MODIFY THIS FILE

###  This is a copy of androidx's benchmark/lockClocks.sh

###  Make changes there instead then copy here!

###

#################################################################

# This script can be used to lock device clocks to stable levels for comparing

# different versions of software.  Since the clock levels are not necessarily

# indicative of real world behavior, this should **never** be used to compare

# performance between different device models.

# Fun notes for maintaining this file:

#      `expr` can deal with ints > INT32_MAX, but if compares cannot. This is why we use MHz.

#      `expr` can sometimes evaluate right-to-left. This is why we use parens.

#      Everything below the initial host-check isn't bash - Android uses mksh

#      mksh allows `\n` in an echo, bash doesn't

#      can't use `awk`

CPU_TARGET_FREQ_PERCENT=50

GPU_TARGET_FREQ_PERCENT=50

if [ "`command -v getprop`" == "" ]; then

    if [ -n "`command -v adb`" ]; then

        echo ""

        echo "Pushing $0 and running it on device..."

        dest=/data/local/tmp/`basename $0`

        adb push $0 ${dest}

        adb shell ${dest}

        adb shell rm ${dest}

        exit

    else

        echo "Could not find adb. Options are:"

        echo "  1. Ensure adb is on your \$PATH"

        echo "  2. Use './gradlew lockClocks'"

        echo "  3. Manually adb push this script to your device, and run it there"

        exit -1

    fi

fi

# require root

if [ "`id -u`" -ne "0" ]; then

    echo "Not running as root, cannot lock clocks, aborting"

    exit -1

fi

DEVICE=`getprop ro.product.device`

MODEL=`getprop ro.product.model`

# Find CPU max frequency, and lock big cores to an available frequency

# that's >= $CPU_TARGET_FREQ_PERCENT% of max. Disable other cores.

function_lock_cpu() {

    CPU_BASE=/sys/devices/system/cpu

    GOV=cpufreq/scaling_governor

    # Find max CPU freq, and associated list of available freqs

    cpuMaxFreq=0

    cpuAvailFreqCmpr=0

    cpuAvailFreq=0

    enableIndices=''

    disableIndices=''

    cpu=0

    while [ -f ${CPU_BASE}/cpu${cpu}/online ]; do

        # enable core, so we can find its frequencies

        echo 1 > ${CPU_BASE}/cpu${cpu}/online

        maxFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/cpuinfo_max_freq`

        availFreq=`cat ${CPU_BASE}/cpu$cpu/cpufreq/scaling_available_frequencies`

        availFreqCmpr=${availFreq// /-}

        if [ ${maxFreq} -gt ${cpuMaxFreq} ]; then

            # new highest max freq, look for cpus with same max freq and same avail freq list

            cpuMaxFreq=${maxFreq}

            cpuAvailFreq=${availFreq}

            cpuAvailFreqCmpr=${availFreqCmpr}

            if [ -z ${disableIndices} ]; then

                disableIndices="$enableIndices"

            else

                disableIndices="$disableIndices $enableIndices"

            fi

            enableIndices=${cpu}

        elif [ ${maxFreq} == ${cpuMaxFreq} ] && [ ${availFreqCmpr} == ${cpuAvailFreqCmpr} ]; then

            enableIndices="$enableIndices $cpu"

        else

            disableIndices="$disableIndices $cpu"

        fi

        cpu=$(($cpu + 1))

    done

    # Chose a frequency to lock to that's >= $CPU_TARGET_FREQ_PERCENT% of max

    # (below, 100M = 1K for KHz->MHz * 100 for %)

    TARGET_FREQ_MHZ=`expr \( ${cpuMaxFreq} \* ${CPU_TARGET_FREQ_PERCENT} \) \/ 100000`

    chosenFreq=0

    for freq in ${cpuAvailFreq}; do

        freqMhz=`expr ${freq} \/ 1000`

        if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ]; then

            chosenFreq=${freq}

            break

        fi

    done

    # enable 'big' CPUs

    for cpu in ${enableIndices}; do

        freq=${CPU_BASE}/cpu$cpu/cpufreq

        echo 1 > ${CPU_BASE}/cpu${cpu}/online

        echo userspace > ${CPU_BASE}/cpu${cpu}/${GOV}

        echo ${chosenFreq} > ${freq}/scaling_max_freq

        echo ${chosenFreq} > ${freq}/scaling_min_freq

        echo ${chosenFreq} > ${freq}/scaling_setspeed

        # validate setting the freq worked

        obsCur=`cat ${freq}/scaling_cur_freq`

        obsMin=`cat ${freq}/scaling_min_freq`

        obsMax=`cat ${freq}/scaling_max_freq`

        if [ obsCur -ne ${chosenFreq} ] || [ obsMin -ne ${chosenFreq} ] || [ obsMax -ne ${chosenFreq} ]; then

            echo "Failed to set CPU$cpu to $chosenFreq Hz! Aborting..."

            echo "scaling_cur_freq = $obsCur"

            echo "scaling_min_freq = $obsMin"

            echo "scaling_max_freq = $obsMax"

            exit -1

        fi

    done

    # disable other CPUs (Note: important to enable big cores first!)

    for cpu in ${disableIndices}; do

      echo 0 > ${CPU_BASE}/cpu${cpu}/online

    done

    echo "\nLocked CPUs ${enableIndices// /,} to $chosenFreq / $maxFreq KHz"

    echo "Disabled CPUs ${disableIndices// /,}"

}

# If we have a Qualcomm GPU, find its max frequency, and lock to

# an available frequency that's >= GPU_TARGET_FREQ_PERCENT% of max.

function_lock_gpu_kgsl() {

    if [ ! -d /sys/class/kgsl/kgsl-3d0/ ]; then

        # not kgsl, abort

        echo "\nCurrently don't support locking GPU clocks of $MODEL ($DEVICE)"

        return -1

    fi

    if [ ${DEVICE} == "walleye" ] || [ ${DEVICE} == "taimen" ]; then

        # Workaround crash

        echo "\nUnable to lock GPU clocks of $MODEL ($DEVICE)"

        return -1

    fi

    GPU_BASE=/sys/class/kgsl/kgsl-3d0

    gpuMaxFreq=0

    gpuAvailFreq=`cat $GPU_BASE/devfreq/available_frequencies`

    for freq in ${gpuAvailFreq}; do

        if [ ${freq} -gt ${gpuMaxFreq} ]; then

            gpuMaxFreq=${freq}

        fi

    done

    # (below, 100M = 1M for MHz * 100 for %)

    TARGET_FREQ_MHZ=`expr \( ${gpuMaxFreq} \* ${GPU_TARGET_FREQ_PERCENT} \) \/ 100000000`

    chosenFreq=${gpuMaxFreq}

    index=0

    chosenIndex=0

    for freq in ${gpuAvailFreq}; do

        freqMhz=`expr ${freq} \/ 1000000`

        if [ ${freqMhz} -ge ${TARGET_FREQ_MHZ} ] && [ ${chosenFreq} -ge ${freq} ]; then

            # note avail freq are generally in reverse order, so we don't break out of this loop

            chosenFreq=${freq}

            chosenIndex=${index}

        fi

        index=$(($index + 1))

    done

    lastIndex=$(($index - 1))

    firstFreq=`echo $gpuAvailFreq | cut -d" " -f1`

    if [ ${gpuMaxFreq} != ${firstFreq} ]; then

        # pwrlevel is index of desired freq among available frequencies, from highest to lowest.

        # If gpuAvailFreq appears to be in-order, reverse the index

        chosenIndex=$(($lastIndex - $chosenIndex))

    fi

    echo 0 > ${GPU_BASE}/bus_split

    echo 1 > ${GPU_BASE}/force_clk_on

    echo 10000 > ${GPU_BASE}/idle_timer

    echo performance > ${GPU_BASE}/devfreq/governor

    # NOTE: we store in min/max twice, because we don't know if we're increasing

    # or decreasing, and it's invalid to try and set min > max, or max < min

    echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq

    echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq

    echo ${chosenFreq} > ${GPU_BASE}/devfreq/min_freq

    echo ${chosenFreq} > ${GPU_BASE}/devfreq/max_freq

    echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel

    echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel

    echo ${chosenIndex} > ${GPU_BASE}/min_pwrlevel

    echo ${chosenIndex} > ${GPU_BASE}/max_pwrlevel

    obsCur=`cat ${GPU_BASE}/devfreq/cur_freq`

    obsMin=`cat ${GPU_BASE}/devfreq/min_freq`

    obsMax=`cat ${GPU_BASE}/devfreq/max_freq`

    if [ obsCur -ne ${chosenFreq} ] || [ obsMin -ne ${chosenFreq} ] || [ obsMax -ne ${chosenFreq} ]; then

        echo "Failed to set GPU to $chosenFreq Hz! Aborting..."

        echo "cur_freq = $obsCur"

        echo "min_freq = $obsMin"

        echo "max_freq = $obsMax"

        echo "index = $chosenIndex"

        exit -1

    fi

    echo "\nLocked GPU to $chosenFreq / $gpuMaxFreq Hz"

}

# kill processes that manage thermals / scaling

stop thermal-engine

stop perfd

stop vendor.thermal-engine

stop vendor.perfd

function_lock_cpu

function_lock_gpu_kgsl

# Memory bus - hardcoded per-device for now

if [ ${DEVICE} == "marlin" ] || [ ${DEVICE} == "sailfish" ]; then

    echo 13763 > /sys/class/devfreq/soc:qcom,gpubw/max_freq

else

    echo "\nUnable to lock memory bus of $MODEL ($DEVICE)."

fi

echo "\n$DEVICE clocks have been locked - to reset, reboot the device\n"

 No newline at end of file