Merge "Add vendor-logged stats to statsd." into pi-dev (3ce667a4) · Commits · e / os / android_frameworks_base

cmds/statsd/src/atoms.proto

+107 −0

Original line number	Diff line number	Diff line
		@@ -110,6 +110,11 @@ message Atom {
		BluetoothEnabledStateChanged bluetooth_enabled_state_changed = 67;
		BluetoothConnectionStateChanged bluetooth_connection_state_changed = 68;
		BluetoothA2dpAudioStateChanged bluetooth_a2dp_audio_state_changed = 69;
		UsbConnectorStateChanged usb_connector_changed = 70;
		SpeakerImpedanceReported speaker_impedance_reported = 71;
		HardwareFailed hardware_failed = 72;
		PhysicalDropDetected physical_drop_detected = 73;
		ChargeCyclesReported charge_cycles_reported = 74;
		// TODO: Reorder the numbering so that the most frequent occur events occur in the first 15.
		}

		@@ -964,6 +969,108 @@ message BluetoothA2dpAudioStateChanged {
		optional State state = 1;
		}

		/**
		* Logs when something is plugged into or removed from the USB-C connector.
		*
		* Logged from:
		* Vendor USB HAL.
		*/
		message UsbConnectorStateChanged {
		enum State {
		DISCONNECTED = 0;
		CONNECTED = 1;
		}
		optional State state = 1;
		}

		/**
		* Logs the reported speaker impedance.
		*
		* Logged from:
		* Vendor audio implementation.
		*/
		message SpeakerImpedanceReported {
		optional int32 speaker_location = 1;
		optional int32 impedance = 2;
		}

		/**
		* Logs the report of a failed hardware.
		*
		* Logged from:
		* Vendor HALs.
		*
		*/
		message HardwareFailed {
		enum HardwareType {
		HARDWARE_FAILED_UNKNOWN = 0;
		HARDWARE_FAILED_MICROPHONE = 1;
		HARDWARE_FAILED_CODEC = 2;
		HARDWARE_FAILED_SPEAKER = 3;
		HARDWARE_FAILED_FINGERPRINT = 4;
		}
		optional HardwareType hardware_type = 1;

		/* hardware_location allows vendors to differentiate between multiple instances of
		* the same hardware_type. The specific locations are vendor defined integers,
		* referring to board-specific numbering schemes.
		*/
		optional int32 hardware_location = 2;

		/* failure_code is specific to the HardwareType of the failed hardware.
		* It should use the enum values defined below.
		*/
		enum MicrophoneFailureCode {
		MICROPHONE_FAILURE_COMPLETE = 0;
		}
		enum CodecFailureCode {
		CODEC_FAILURE_COMPLETE = 0;
		}
		enum SpeakerFailureCode {
		SPEAKER_FAILURE_COMPLETE = 0;
		SPEAKER_FAILURE_HIGH_Z = 1;
		SPEAKER_FAILURE_SHORT = 2;
		}
		enum FingerprintFailureCode {
		FINGERPRINT_FAILURE_COMPLETE = 0;
		FINGERPRINT_SENSOR_BROKEN = 1;
		FINGERPRINT_TOO_MANY_DEAD_PIXELS = 2;
		}
		optional int32 failure_code = 3;
		}

		/**
		* Log an event when the device has been physically dropped.
		* Reported from the /vendor partition.
		*/
		message PhysicalDropDetected {
		// Confidence that the event was actually a drop, 0 -> 100
		optional int32 confidence_pctg = 1;
		// Peak acceleration of the drop, in 1/1000s of a g.
		optional int32 accel_peak_thousandths_g = 2;
		}

		/**
		* Log bucketed battery charge cycles.
		*
		* Each bucket represents cycles of the battery past
		* a given charge point. For example, bucket 1 is the
		* lowest 1/8th of the battery, and bucket 8 is 100%.
		*
		* Logged from:
		* /sys/class/power_supply/bms/cycle_count, via Vendor.
		*/
		message ChargeCyclesReported {
		optional int32 cycle_bucket_1 = 1;
		optional int32 cycle_bucket_2 = 2;
		optional int32 cycle_bucket_3 = 3;
		optional int32 cycle_bucket_4 = 4;
		optional int32 cycle_bucket_5 = 5;
		optional int32 cycle_bucket_6 = 6;
		optional int32 cycle_bucket_7 = 7;
		optional int32 cycle_bucket_8 = 8;
		}

		/**
		* Logs the duration of a davey (jank of >=700ms) when it occurs
		*