Merge "Fix up brightness docs." into pi-dev

         in darkness (although they may not be visible in a bright room). -->

    <integer name="config_screenBrightnessDark">1</integer>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.

    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.

         The N entries of this array define N + 1 control points as follows:

         (1-based arrays)

         The control points must be strictly increasing.  Each control point

         corresponds to an entry in the brightness backlight values arrays.

         For example, if LUX == level[1] (first element of the levels array)

         For example, if lux == level[1] (first element of the levels array)

         then the brightness will be determined by value[2] (second element

         of the brightness values array).

         Spline interpolation is used to determine the auto-brightness

         backlight values for LUX levels between these control points.

         backlight values for lux levels between these control points.

         Must be overridden in platform specific overlays -->

    <integer-array name="config_autoBrightnessLevels">

    </integer-array>

    <!-- Array of output values for LCD backlight corresponding to the LUX values

    <!-- Array of output values for LCD backlight corresponding to the lux values

         in the config_autoBrightnessLevels array.  This array should have size one greater

         than the size of the config_autoBrightnessLevels array.

         The brightness values must be between 0 and 255 and be non-decreasing.

    <array name="config_autoBrightnessDisplayValuesNits">

    </array>

    <!-- Array of output values for button backlight corresponding to the LUX values

    <!-- Array of output values for button backlight corresponding to the luX values

         in the config_autoBrightnessLevels array.  This array should have size one greater

         than the size of the config_autoBrightnessLevels array.

         The brightness values must be between 0 and 255 and be non-decreasing.

    <integer-array name="config_autoBrightnessButtonBacklightValues">

    </integer-array>

    <!-- Array of output values for keyboard backlight corresponding to the LUX values

    <!-- Array of output values for keyboard backlight corresponding to the lux values

         in the config_autoBrightnessLevels array.  This array should have size one greater

         than the size of the config_autoBrightnessLevels array.

         The brightness values must be between 0 and 255 and be non-decreasing.