Snap for 6088378 from 60f0f304bcd573581e7c6bf1cbd05cad36f97c67 to rvc-release (6aaf0aed) · Commits · e / os / android_frameworks_av

camera/ndk/impl/ACameraMetadata.cpp

+1 −0

Original line number	Diff line number	Diff line
		@@ -480,6 +480,7 @@ ACameraMetadata::isCaptureRequestTag(const uint32_t tag) {
		case ACAMERA_CONTROL_POST_RAW_SENSITIVITY_BOOST:
		case ACAMERA_CONTROL_ENABLE_ZSL:
		case ACAMERA_CONTROL_BOKEH_MODE:
		case ACAMERA_CONTROL_ZOOM_RATIO:
		case ACAMERA_EDGE_MODE:
		case ACAMERA_FLASH_MODE:
		case ACAMERA_HOT_PIXEL_MODE:

camera/ndk/include/camera/NdkCameraMetadataTags.h

+183 −9

Original line number	Diff line number	Diff line
		@@ -518,11 +518,22 @@ typedef enum acamera_metadata_tag {
		* region and output only the intersection rectangle as the metering region in the result
		* metadata. If the region is entirely outside the crop region, it will be ignored and
		* not reported in the result metadata.</p>
		* <p>Starting from API level 30, the coordinate system of activeArraySize or
		* preCorrectionActiveArraySize is used to represent post-zoomRatio field of view, not
		* pre-zoom field of view. This means that the same aeRegions values at different
		* ACAMERA_CONTROL_ZOOM_RATIO represent different parts of the scene. The aeRegions
		* coordinates are relative to the activeArray/preCorrectionActiveArray representing the
		* zoomed field of view. If ACAMERA_CONTROL_ZOOM_RATIO is set to 1.0 (default), the same
		* aeRegions at different ACAMERA_SCALER_CROP_REGION still represent the same parts of the
		* scene as they do before. See ACAMERA_CONTROL_ZOOM_RATIO for details. Whether to use
		* activeArraySize or preCorrectionActiveArraySize still depends on distortion correction
		* mode.</p>
		* <p>The data representation is <code>int[5 * area_count]</code>.
		* Every five elements represent a metering region of <code>(xmin, ymin, xmax, ymax, weight)</code>.
		* The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
		* ymax.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		@@ -698,11 +709,22 @@ typedef enum acamera_metadata_tag {
		* region and output only the intersection rectangle as the metering region in the result
		* metadata. If the region is entirely outside the crop region, it will be ignored and
		* not reported in the result metadata.</p>
		* <p>Starting from API level 30, the coordinate system of activeArraySize or
		* preCorrectionActiveArraySize is used to represent post-zoomRatio field of view, not
		* pre-zoom field of view. This means that the same afRegions values at different
		* ACAMERA_CONTROL_ZOOM_RATIO represent different parts of the scene. The afRegions
		* coordinates are relative to the activeArray/preCorrectionActiveArray representing the
		* zoomed field of view. If ACAMERA_CONTROL_ZOOM_RATIO is set to 1.0 (default), the same
		* afRegions at different ACAMERA_SCALER_CROP_REGION still represent the same parts of the
		* scene as they do before. See ACAMERA_CONTROL_ZOOM_RATIO for details. Whether to use
		* activeArraySize or preCorrectionActiveArraySize still depends on distortion correction
		* mode.</p>
		* <p>The data representation is <code>int[5 * area_count]</code>.
		* Every five elements represent a metering region of <code>(xmin, ymin, xmax, ymax, weight)</code>.
		* The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
		* ymax.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		@@ -873,11 +895,22 @@ typedef enum acamera_metadata_tag {
		* region and output only the intersection rectangle as the metering region in the result
		* metadata. If the region is entirely outside the crop region, it will be ignored and
		* not reported in the result metadata.</p>
		* <p>Starting from API level 30, the coordinate system of activeArraySize or
		* preCorrectionActiveArraySize is used to represent post-zoomRatio field of view, not
		* pre-zoom field of view. This means that the same awbRegions values at different
		* ACAMERA_CONTROL_ZOOM_RATIO represent different parts of the scene. The awbRegions
		* coordinates are relative to the activeArray/preCorrectionActiveArray representing the
		* zoomed field of view. If ACAMERA_CONTROL_ZOOM_RATIO is set to 1.0 (default), the same
		* awbRegions at different ACAMERA_SCALER_CROP_REGION still represent the same parts of
		* the scene as they do before. See ACAMERA_CONTROL_ZOOM_RATIO for details. Whether to use
		* activeArraySize or preCorrectionActiveArraySize still depends on distortion correction
		* mode.</p>
		* <p>The data representation is <code>int[5 * area_count]</code>.
		* Every five elements represent a metering region of <code>(xmin, ymin, xmax, ymax, weight)</code>.
		* The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
		* ymax.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		@@ -1735,8 +1768,10 @@ typedef enum acamera_metadata_tag {
		ACAMERA_CONTROL_AF_SCENE_CHANGE = // byte (acamera_metadata_enum_android_control_af_scene_change_t)
		ACAMERA_CONTROL_START + 42,
		/**
		* <p>The list of bokeh modes that are supported by this camera device, and each bokeh mode's
		* maximum streaming (non-stall) size with bokeh effect.</p>
		* <p>The list of bokeh modes for ACAMERA_CONTROL_BOKEH_MODE that are supported by this camera
		* device, and each bokeh mode's maximum streaming (non-stall) size with bokeh effect.</p>
		*
		* @see ACAMERA_CONTROL_BOKEH_MODE
		*
		* <p>Type: int32[3*n]</p>
		*
		@@ -1761,8 +1796,30 @@ typedef enum acamera_metadata_tag {
		* application configures a stream with larger dimension, the stream may not have bokeh
		* effect applied.</p>
		*/
		ACAMERA_CONTROL_AVAILABLE_BOKEH_CAPABILITIES = // int32[3*n]
		ACAMERA_CONTROL_AVAILABLE_BOKEH_MAX_SIZES = // int32[3*n]
		ACAMERA_CONTROL_START + 43,
		/**
		* <p>The ranges of supported zoom ratio for non-OFF ACAMERA_CONTROL_BOKEH_MODE.</p>
		*
		* @see ACAMERA_CONTROL_BOKEH_MODE
		*
		* <p>Type: float[2*n]</p>
		*
		* <p>This tag may appear in:
		* <ul>
		* <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
		* </ul></p>
		*
		* <p>When bokeh mode is enabled, the camera device may have limited range of zoom ratios
		* compared to when bokeh mode is disabled. This tag lists the zoom ratio ranges for all
		* supported non-OFF bokeh modes, in the same order as in
		* ACAMERA_CONTROL_AVAILABLE_BOKEH_CAPABILITIES.</p>
		* <p>Range [1.0, 1.0] means that no zoom (optical or digital) is supported.</p>
		*
		* @see ACAMERA_CONTROL_AVAILABLE_BOKEH_CAPABILITIES
		*/
		ACAMERA_CONTROL_AVAILABLE_BOKEH_ZOOM_RATIO_RANGES = // float[2*n]
		ACAMERA_CONTROL_START + 44,
		/**
		* <p>Whether bokeh mode is enabled for a particular capture request.</p>
		*
		@@ -1804,7 +1861,71 @@ typedef enum acamera_metadata_tag {
		* bokeh mode is off.</p>
		*/
		ACAMERA_CONTROL_BOKEH_MODE = // byte (acamera_metadata_enum_android_control_bokeh_mode_t)
		ACAMERA_CONTROL_START + 44,
		ACAMERA_CONTROL_START + 45,
		/**
		* <p>Minimum and maximum zoom ratios supported by this camera device.</p>
		*
		* <p>Type: float[2]</p>
		*
		* <p>This tag may appear in:
		* <ul>
		* <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
		* </ul></p>
		*
		* <p>If the camera device supports zoom-out from 1x zoom, minZoom will be less than 1.0, and
		* setting android.control.zoomRation to values less than 1.0 increases the camera's field
		* of view.</p>
		*/
		ACAMERA_CONTROL_ZOOM_RATIO_RANGE = // float[2]
		ACAMERA_CONTROL_START + 46,
		/**
		* <p>The desired zoom ratio</p>
		*
		* <p>Type: float</p>
		*
		* <p>This tag may appear in:
		* <ul>
		* <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
		* <li>ACaptureRequest</li>
		* </ul></p>
		*
		* <p>Instead of using ACAMERA_SCALER_CROP_REGION with dual purposes of crop and zoom, the
		* application can now choose to use this tag to specify the desired zoom level. The
		* ACAMERA_SCALER_CROP_REGION can still be used to specify the horizontal or vertical
		* crop to achieve aspect ratios different than the native camera sensor.</p>
		* <p>By using this control, the application gains a simpler way to control zoom, which can
		* be a combination of optical and digital zoom. More specifically, for a logical
		* multi-camera with more than one focal length, using a floating point zoom ratio offers
		* more zoom precision when a telephoto lens is used, as well as allowing zoom ratio of
		* less than 1.0 to zoom out to a wide field of view.</p>
		* <p>Note that the coordinate system of cropRegion, AE/AWB/AF regions, and faces now changes
		* to the effective after-zoom field-of-view represented by rectangle of (0, 0,
		* activeArrayWidth, activeArrayHeight).</p>
		* <p>For example, if ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE is 4032*3024, and the preview stream
		* is configured to the same 4:3 aspect ratio, the application can achieve 2.0x zoom in
		* one of two ways:</p>
		* <ul>
		* <li>zoomRatio = 2.0, scaler.cropRegion = (0, 0, 4032, 3024)</li>
		* <li>zoomRatio = 1.0 (default), scaler.cropRegion = (1008, 756, 3024, 2268)</li>
		* </ul>
		* <p>If the application intends to set aeRegions to be top-left quarter of the preview
		* field-of-view, the ACAMERA_CONTROL_AE_REGIONS should be set to (0, 0, 2016, 1512) with
		* zoomRatio set to 2.0. Alternatively, the application can set aeRegions to the equivalent
		* region of (1008, 756, 2016, 1512) for zoomRatio of 1.0. If the application doesn't
		* explicitly set ACAMERA_CONTROL_ZOOM_RATIO, its value defaults to 1.0.</p>
		* <p>This coordinate system change isn't applicable to RAW capture and its related metadata
		* such as intrinsicCalibration and lensShadingMap.</p>
		* <p>One limitation of controlling zoom using zoomRatio is that the ACAMERA_SCALER_CROP_REGION
		* must only be used for letterboxing or pillarboxing of the sensor active array, and no
		* FREEFORM cropping can be used with ACAMERA_CONTROL_ZOOM_RATIO other than 1.0.</p>
		*
		* @see ACAMERA_CONTROL_AE_REGIONS
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		*/
		ACAMERA_CONTROL_ZOOM_RATIO = // float
		ACAMERA_CONTROL_START + 47,
		ACAMERA_CONTROL_END,

		/**
		@@ -3203,8 +3324,17 @@ typedef enum acamera_metadata_tag {
		* for rounding and other hardware requirements; the final
		* crop region used will be included in the output capture
		* result.</p>
		* <p>Starting from API level 30, it's strongly recommended to use ACAMERA_CONTROL_ZOOM_RATIO
		* to take advantage of better support for zoom with logical multi-camera. The benefits
		* include better precision with optical-digital zoom combination, and ability to do
		* zoom-out from 1.0x. When using ACAMERA_CONTROL_ZOOM_RATIO for zoom, the crop region in
		* the capture request must be either letterboxing or pillarboxing (but not both). The
		* coordinate system is post-zoom, meaning that the activeArraySize or
		* preCorrectionActiveArraySize covers the camera device's field of view "after" zoom.
		* See ACAMERA_CONTROL_ZOOM_RATIO for details.</p>
		* <p>The data representation is int[4], which maps to (left, top, width, height).</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		@@ -3232,6 +3362,12 @@ typedef enum acamera_metadata_tag {
		* <p>Crop regions that have a width or height that is smaller
		* than this ratio allows will be rounded up to the minimum
		* allowed size by the camera device.</p>
		* <p>Starting from API level 30, when using ACAMERA_CONTROL_ZOOM_RATIO to zoom in or out,
		* the application must use ACAMERA_CONTROL_ZOOM_RATIO_RANGE to query both the minimum and
		* maximum zoom ratio.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_CONTROL_ZOOM_RATIO_RANGE
		*/
		ACAMERA_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM = // float
		ACAMERA_SCALER_START + 4,
		@@ -3406,8 +3542,24 @@ typedef enum acamera_metadata_tag {
		* <p>Camera devices that support FREEFORM cropping will support any crop region that
		* is inside of the active array. The camera device will apply the same crop region and
		* return the final used crop region in capture result metadata ACAMERA_SCALER_CROP_REGION.</p>
		* <p>Starting from API level 30,</p>
		* <ul>
		* <li>If the camera device supports FREEFORM cropping, in order to do FREEFORM cropping, the
		* application must set ACAMERA_CONTROL_ZOOM_RATIO to 1.0, and use ACAMERA_SCALER_CROP_REGION
		* for zoom.</li>
		* <li>To do CENTER_ONLY zoom, the application has below 2 options:<ol>
		* <li>Set ACAMERA_CONTROL_ZOOM_RATIO to 1.0; adjust zoom by ACAMERA_SCALER_CROP_REGION.</li>
		* <li>Adjust zoom by ACAMERA_CONTROL_ZOOM_RATIO; use ACAMERA_SCALER_CROP_REGION to crop
		* the field of view vertically (letterboxing) or horizontally (pillarboxing), but not
		* windowboxing.</li>
		* </ol>
		* </li>
		* <li>Setting ACAMERA_CONTROL_ZOOM_RATIO to values different than 1.0 and
		* ACAMERA_SCALER_CROP_REGION to be windowboxing at the same time is undefined behavior.</li>
		* </ul>
		* <p>LEGACY capability devices will only support CENTER_ONLY cropping.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		*/
		@@ -4707,9 +4859,20 @@ typedef enum acamera_metadata_tag {
		* When the distortion correction mode is not OFF, the coordinate system follows
		* ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, with
		* <code>(0, 0)</code> being the top-left pixel of the active array.</p>
		* <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE == FULL</p>
		*
		* <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE == FULL.</p>
		* <p>Starting from API level 30, the coordinate system of activeArraySize or
		* preCorrectionActiveArraySize is used to represent post-zoomRatio field of view, not
		* pre-zoomRatio field of view. This means that if the relative position of faces and
		* the camera device doesn't change, when zooming in by increasing
		* ACAMERA_CONTROL_ZOOM_RATIO, the face landmarks move farther away from the center of the
		* activeArray or preCorrectionActiveArray. If ACAMERA_CONTROL_ZOOM_RATIO is set to 1.0
		* (default), the face landmarks coordinates won't change as ACAMERA_SCALER_CROP_REGION
		* changes. See ACAMERA_CONTROL_ZOOM_RATIO for details. Whether to use activeArraySize or
		* preCorrectionActiveArraySize still depends on distortion correction mode.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		* @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
		* @see ACAMERA_STATISTICS_FACE_DETECT_MODE
		@@ -4738,10 +4901,21 @@ typedef enum acamera_metadata_tag {
		* When the distortion correction mode is not OFF, the coordinate system follows
		* ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE, with
		* <code>(0, 0)</code> being the top-left pixel of the active array.</p>
		* <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE != OFF
		* The data representation is <code>int[4]</code>, which maps to <code>(left, top, right, bottom)</code>.</p>
		*
		* <p>Only available if ACAMERA_STATISTICS_FACE_DETECT_MODE != OFF.</p>
		* <p>Starting from API level 30, the coordinate system of activeArraySize or
		* preCorrectionActiveArraySize is used to represent post-zoomRatio field of view, not
		* pre-zoomRatio field of view. This means that if the relative position of faces and
		* the camera device doesn't change, when zooming in by increasing
		* ACAMERA_CONTROL_ZOOM_RATIO, the face rectangles grow larger and move farther away from
		* the center of the activeArray or preCorrectionActiveArray. If ACAMERA_CONTROL_ZOOM_RATIO
		* is set to 1.0 (default), the face rectangles won't change as ACAMERA_SCALER_CROP_REGION
		* changes. See ACAMERA_CONTROL_ZOOM_RATIO for details. Whether to use activeArraySize or
		* preCorrectionActiveArraySize still depends on distortion correction mode.</p>
		* <p>The data representation is <code>int[4]</code>, which maps to <code>(left, top, right, bottom)</code>.</p>
		*
		* @see ACAMERA_CONTROL_ZOOM_RATIO
		* @see ACAMERA_DISTORTION_CORRECTION_MODE
		* @see ACAMERA_SCALER_CROP_REGION
		* @see ACAMERA_SENSOR_INFO_ACTIVE_ARRAY_SIZE
		* @see ACAMERA_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE
		* @see ACAMERA_STATISTICS_FACE_DETECT_MODE

media/libeffects/config/src/EffectsConfig.cpp

+1 −0

Original line number	Diff line number	Diff line
		@@ -100,6 +100,7 @@ constexpr std::pair<audio_stream_type_t, const char*> STREAM_NAME_MAP<audio_stre
		{AUDIO_STREAM_ENFORCED_AUDIBLE, "enforced_audible"},
		{AUDIO_STREAM_DTMF, "dtmf"},
		{AUDIO_STREAM_TTS, "tts"},
		{AUDIO_STREAM_ASSISTANT, "assistant"},
		};

		/** All input stream types which support effects.

media/libmediahelper/TypeConverter.cpp

+1 −0

Original line number	Diff line number	Diff line
		@@ -312,6 +312,7 @@ const StreamTypeConverter::Table StreamTypeConverter::mTable[] = {
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_DTMF),
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_TTS),
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_ACCESSIBILITY),
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_ASSISTANT),
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_REROUTING),
		MAKE_STRING_FROM_ENUM(AUDIO_STREAM_PATCH),
		TERMINATOR

media/libmediametrics/MediaMetricsItem.cpp

+103 −531

File changed.

Preview size limit exceeded, changes collapsed.