Merge changes I0b8ae921,Ib8bda8ab

#

# Template audio policy configuration file

#

# Global configuration section:

# - before audio HAL version 3.0:

#   lists input and output devices always present on the device

#   as well as the output device selected by default.

#   Devices are designated by a string that corresponds to the enum in audio.h

#

#  global_configuration {

#    attached_output_devices AUDIO_DEVICE_OUT_SPEAKER

#    default_output_device AUDIO_DEVICE_OUT_SPEAKER

#    attached_input_devices AUDIO_DEVICE_IN_BUILTIN_MIC|AUDIO_DEVICE_IN_REMOTE_SUBMIX

#  }

#

# - after and including audio HAL 3.0 the global_configuration section is included in each

#   hardware module section.

#   it also includes the audio HAL version of this hw module:

#  global_configuration {

#    ...

#     audio_hal_version <major.minor>  # audio HAL version in e.g. 3.0

#  }

#   other attributes (attached devices, default device) have to be included in the

#   global_configuration section of each hardware module

# audio hardware module section: contains descriptors for all audio hw modules present on the

# device. Each hw module node is named after the corresponding hw module library base name.

# For instance, "primary" corresponds to audio.primary.<device>.so.

# The "primary" module is mandatory and must include at least one output with

# AUDIO_OUTPUT_FLAG_PRIMARY flag.

# Each module descriptor contains one or more output profile descriptors and zero or more

# input profile descriptors. Each profile lists all the parameters supported by a given output

# or input stream category.

# The "channel_masks", "formats", "devices" and "flags" are specified using strings corresponding

# to enums in audio.h and audio_policy.h. They are concatenated by use of "|" without space or "\n".

#

# For audio HAL version posterior to 3.0 the following sections or sub sections can be present in

# a hw module section:

# - A "global_configuration" section: see above

# - Optionally a "devices" section:

#   This section contains descriptors for audio devices with attributes like an address or a

#   gain controller. The syntax for the devices section and device descriptor is as follows:

#    devices {

#      <device name> {              # <device name>: any string without space

#        type <device type>         # <device type> e.g. AUDIO_DEVICE_OUT_SPEAKER

#        address <address>          # optional: device address, char string less than 64 in length

#      }

#    }

# - one or more "gains" sections can be present in a device descriptor section.

#   If present, they describe the capabilities of gain controllers attached to this input or

#   output device. e.g. :

#   <device name> {                  # <device name>: any string without space

#     type <device type>             # <device type> e.g. AUDIO_DEVICE_OUT_SPEAKER

#     address <address>              # optional: device address, char string less than 64 in length

#     gains {

#       <gain name> {

#         mode <gain modes supported>              # e.g. AUDIO_GAIN_MODE_CHANNELS

#         channel_mask <controlled channels>       # needed if mode AUDIO_GAIN_MODE_CHANNELS

#         min_value_mB <min value in millibel>

#         max_value_mB <max value in millibel>

#         default_value_mB <default value in millibel>

#         step_value_mB <step value in millibel>

#         min_ramp_ms <min duration in ms>         # needed if mode AUDIO_GAIN_MODE_RAMP

#         max_ramp_ms <max duration ms>            # needed if mode AUDIO_GAIN_MODE_RAMP

#       }

#     }

#   }

# - when a device descriptor is present, output and input profiles can refer to this device by

# its name in their "devices" section instead of specifying a device type. e.g. :

#   outputs {

#     primary {

#       sampling_rates 44100

#       channel_masks AUDIO_CHANNEL_OUT_STEREO

#       formats AUDIO_FORMAT_PCM_16_BIT

#       devices <device name>

#       flags AUDIO_OUTPUT_FLAG_PRIMARY

#     }

#   }

# sample audio_policy.conf file below

audio_hw_modules {

  primary {

    global_configuration {

      attached_output_devices AUDIO_DEVICE_OUT_SPEAKER

      default_output_device AUDIO_DEVICE_OUT_SPEAKER

      attached_input_devices AUDIO_DEVICE_IN_BUILTIN_MIC

      audio_hal_version 3.0

    }

    devices {

      speaker {

        type AUDIO_DEVICE_OUT_SPEAKER

        gains {

          gain_1 {

            mode AUDIO_GAIN_MODE_JOINT

            min_value_mB -8400

            max_value_mB 4000

            default_value_mB 0

            step_value_mB 100

          }

        }

      }

    }

    outputs {

      primary {

        sampling_rates 48000

        channel_masks AUDIO_CHANNEL_OUT_STEREO

        formats AUDIO_FORMAT_PCM_16_BIT

        devices speaker

        flags AUDIO_OUTPUT_FLAG_PRIMARY

      }

    }

    inputs {

      primary {

        sampling_rates 8000|16000

        channel_masks AUDIO_CHANNEL_IN_MONO

        formats AUDIO_FORMAT_PCM_16_BIT

        devices AUDIO_DEVICE_IN_BUILTIN_MIC

      }

    }

  }

  r_submix {

    global_configuration {

      attached_input_devices AUDIO_DEVICE_IN_REMOTE_SUBMIX

      audio_hal_version 2.0

    }

    outputs {

      submix {

        sampling_rates 48000

        channel_masks AUDIO_CHANNEL_OUT_STEREO

        formats AUDIO_FORMAT_PCM_16_BIT

        devices AUDIO_DEVICE_OUT_REMOTE_SUBMIX

      }

    }

    inputs {

      submix {

        sampling_rates 48000

        channel_masks AUDIO_CHANNEL_IN_STEREO

        formats AUDIO_FORMAT_PCM_16_BIT

        devices AUDIO_DEVICE_IN_REMOTE_SUBMIX

      }

    }

  }

}

/*

 * Copyright (C) 2012 The Android Open Source Project

 *

 * Licensed under the Apache License, Version 2.0 (the "License");

 * you may not use this file except in compliance with the License.

 * You may obtain a copy of the License at

 *

 *      http://www.apache.org/licenses/LICENSE-2.0

 *

 * Unless required by applicable law or agreed to in writing, software

 * distributed under the License is distributed on an "AS IS" BASIS,

 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

 * See the License for the specific language governing permissions and

 * limitations under the License.

 */

#pragma once

/////////////////////////////////////////////////

//      Definitions for audio policy configuration file (audio_policy.conf)

/////////////////////////////////////////////////

#define AUDIO_HARDWARE_MODULE_ID_MAX_LEN 32

#define AUDIO_POLICY_CONFIG_FILE "/system/etc/audio_policy.conf"

#define AUDIO_POLICY_VENDOR_CONFIG_FILE "/vendor/etc/audio_policy.conf"

// global configuration

#define GLOBAL_CONFIG_TAG "global_configuration"

#define ATTACHED_OUTPUT_DEVICES_TAG "attached_output_devices"

#define DEFAULT_OUTPUT_DEVICE_TAG "default_output_device"

#define ATTACHED_INPUT_DEVICES_TAG "attached_input_devices"

#define SPEAKER_DRC_ENABLED_TAG "speaker_drc_enabled"

#define AUDIO_HAL_VERSION_TAG "audio_hal_version"

// hw modules descriptions

#define AUDIO_HW_MODULE_TAG "audio_hw_modules"

#define OUTPUTS_TAG "outputs"

#define INPUTS_TAG "inputs"

#define SAMPLING_RATES_TAG "sampling_rates"

#define FORMATS_TAG "formats"

#define CHANNELS_TAG "channel_masks"

#define DEVICES_TAG "devices"

#define FLAGS_TAG "flags"

#define APM_DEVICES_TAG "devices"

#define APM_DEVICE_TYPE "type"

#define APM_DEVICE_ADDRESS "address"

#define MIXERS_TAG "mixers"

#define MIXER_TYPE "type"

#define MIXER_TYPE_MUX "mux"

#define MIXER_TYPE_MIX "mix"

#define GAINS_TAG "gains"

#define GAIN_MODE "mode"

#define GAIN_CHANNELS "channel_mask"

#define GAIN_MIN_VALUE "min_value_mB"

#define GAIN_MAX_VALUE "max_value_mB"

#define GAIN_DEFAULT_VALUE "default_value_mB"

#define GAIN_STEP_VALUE "step_value_mB"

#define GAIN_MIN_RAMP_MS "min_ramp_ms"

#define GAIN_MAX_RAMP_MS "max_ramp_ms"

#define DYNAMIC_VALUE_TAG "dynamic" // special value for "channel_masks", "sampling_rates" and

                                    // "formats" in outputs descriptors indicating that supported

                                    // values should be queried after opening the output.

ifeq ($(USE_CONFIGURABLE_AUDIO_POLICY), 1)

ifneq ($(USE_XML_AUDIO_POLICY_CONF), 1)

$(error Configurable policy does not support legacy conf file)

endif #ifneq ($(USE_XML_AUDIO_POLICY_CONF), 1)

LOCAL_SHARED_LIBRARIES += libaudiopolicyengineconfigurable

else

LOCAL_SHARED_LIBRARIES += libbinder libhidlbase libxml2

ifeq ($(USE_XML_AUDIO_POLICY_CONF), 1)

LOCAL_CFLAGS += -DUSE_XML_AUDIO_POLICY_CONF

endif #ifeq ($(USE_XML_AUDIO_POLICY_CONF), 1)

LOCAL_CFLAGS += -Wall -Werror

LOCAL_MULTILIB := $(AUDIOSERVER_MULTILIB)

#include <private/android_filesystem_config.h>

#include <soundtrigger/SoundTrigger.h>

#include <system/audio.h>

#include <audio_policy_conf.h>

#include "AudioPolicyManager.h"

#include <Serializer.h>

#include "TypeConverter.h"

    initialize();

}

//  This check is to catch any legacy platform updating to Q without having

//  switched to XML since its deprecation on O.

// TODO: after Q release, remove this check and flag as XML is now the only

//        option and all legacy platform should have transitioned to XML.

#ifndef USE_XML_AUDIO_POLICY_CONF

#error Audio policy no longer supports legacy .conf configuration format

#endif

void AudioPolicyManager::loadConfig() {

    if (deserializeAudioPolicyXmlConfig(getConfig()) != NO_ERROR) {

        ALOGE("could not load audio policy configuration file, setting defaults");