auto import from //depot/cupcake/@135843

#

# Copyright (C) 2007 The Android Open Source Project

#

# Licensed under the Apache License, Version 2.0 (the "License");

# you may not use this file except in compliance with the License.

# You may obtain a copy of the License at

#

#      http://www.apache.org/licenses/LICENSE-2.0

#

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

#

######################################################################

# This is a do-nothing template file.  To use it, copy it to a file

# named "buildspec.mk" in the root directory, and uncomment or change

# the variables necessary for your desired configuration.  The file

# "buildspec.mk" should never be checked in to source control.

######################################################################

# Uncomment this if you want the simulator, otherwise, build for arm

ifndef TARGET_SIMULATOR

#TARGET_SIMULATOR:=true

endif

# Set this to debug or release if you care.  Otherwise, it defaults to

# release for arm and debug for the simulator.

ifndef TARGET_BUILD_TYPE

#TARGET_BUILD_TYPE:=release

#TARGET_BUILD_TYPE:=debug

endif

# Uncomment this if you want the host tools built in debug mode.  Otherwise

# it defaults to release.

ifndef HOST_BUILD_TYPE

#HOST_BUILD_TYPE:=debug

endif

# Turn on debugging for selected modules.  If DEBUG_MODULE_<module-name> is set

# to a non-empty value, the appropriate HOST_/TARGET_CUSTOM_DEBUG_CFLAGS

# will be added to LOCAL_CFLAGS when building the module.

#DEBUG_MODULE_ModuleName:=true

# Specify the extra CFLAGS to use when building a module whose

# DEBUG_MODULE_ variable is set.  Host and device flags are handled

# separately.

#HOST_CUSTOM_DEBUG_CFLAGS:=

#TARGET_CUSTOM_DEBUG_CFLAGS:=

# Choose a product to build for.  Look in the products directory for ones

# that work.

ifndef TARGET_PRODUCT

#TARGET_PRODUCT:=generic

endif

# Choose additional targets to always install, even when building

# minimal targets like "make droid".  This takes simple target names

# like "Browser" or "MyApp", the names used by LOCAL_MODULE or

# LOCAL_PACKAGE_NAME.  Modules listed here will always be installed in

# /system, even if they'd usually go in /data.

ifndef CUSTOM_MODULES

#CUSTOM_MODULES:=

endif

# Choose additional locales, like "en_US" or "it_IT", to add to any

# built product.  Any locales that appear in CUSTOM_LOCALES but not in

# the locale list for the selected product will be added to the end

# of PRODUCT_LOCALES.

ifndef CUSTOM_LOCALES

#CUSTOM_LOCALES:=

endif

# If you have a special place to put your ouput files, set this, otherwise

# it goes to <build-root>/out

#OUT_DIR:=/tmp/stuff

# If you want to always set certain system properties, add them to this list.

# E.g., "ADDITIONAL_BUILD_PROPERTIES += ro.prop1=5 prop2=value"

# This mechanism does not currently support values containing spaces.

#ADDITIONAL_BUILD_PROPERTIES +=

# If you want to reduce the system.img size by several meg, and are willing to

# lose access to CJK (and other) character sets, define NO_FALLBACK_FONT:=true

ifndef NO_FALLBACK_FONT

#NO_FALLBACK_FONT:=true

endif

# To enabled instrumentation in webcore based apps like gmail and

# the browser, define WEBCORE_INSTRUMENTATION:=true

#WEBCORE_INSTRUMENTATION:=true

#endif

# when the build system changes such that this file must be updated, this

# variable will be changed.  After you have modified this file with the new

# changes (see buildspec.mk.default), update this to the new value from

# buildspec.mk.default.

BUILD_ENV_SEQUENCE_NUMBER := 9

# Copyright (C) 2007 The Android Open Source Project

#

# Licensed under the Apache License, Version 2.0 (the "License");

# you may not use this file except in compliance with the License.

# You may obtain a copy of the License at

#

#      http://www.apache.org/licenses/LICENSE-2.0

#

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

#

# Just bump this if you want to force a clean build.

# **********************************************************************

# WHEN DOING SO, DELETE ANY "add-clean-step" ENTRIES THAT HAVE PILED UP.

# **********************************************************************

#

INTERNAL_CLEAN_BUILD_VERSION := 2

#

# ***********************************************************************

# Do not touch INTERNAL_CLEAN_BUILD_VERSION if you've added a clean step!

# ***********************************************************************

# If you don't need to do a full clean build but would like to touch

# a file or delete some intermediate files, add a clean step to the end

# of the list.  These steps will only be run once, if they haven't been

# run before.

#

# E.g.:

#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)

#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/external/zlib/)

#

# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with

# files that are missing or have been moved.

#

# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.

# Use $(OUT_DIR) to refer to the "out" directory.

#

# If you need to re-do something that's already mentioned, just copy

# the command and add it to the bottom of the list.  E.g., if a change

# that you made last week required touching a file and a change you

# made today requires touching the same file, just copy the old

# touch step and add it to the end of the list.

#

# ************************************************

# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST

# ************************************************

# For example:

#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)

#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)

#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)

#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)

$(call add-clean-step, rm -f $(PRODUCT_OUT)/system/etc/NOTICE.html)

# Remove generated java files after CL 126153

$(call add-clean-step, find $(OUT_DIR) -type f -name "*.java" -print0 | xargs -0 rm -f)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/sapphire/obj/SHARED_LIBRARIES/libhardware_legacy_intermediates/led)

$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/mountd)

$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/mountd.conf)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/Browser_intermediates)

$(call add-clean-step, rm -f vendor/google/apps/Talk/res/drawable/%*)

$(call add-clean-step, rm -rf $(OUT_DIR)/product/*/obj/SHARED_LIBRARIES/libandroid_runtime_intermediates/android_os_NetStat.o)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/*/obj/SHARED_LIBRARIES/libjni_andpyime_intermediates)

$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/*/obj/SHARED_LIBRARIES/share)

# ************************************************

# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST

# ************************************************

******************************

You have tried to change the API from what has been previously approved.

To make these errors go away, you have two choices:

   1) You can add "@hide" javadoc comments to the methods, etc. listed in the

      errors above.

   2) You can update current.xml by executing the following commands:

         p4 edit frameworks/base/api/current.xml

         make update-api

      To check in the revised current.xml, you will need OWNERS approval.

******************************

******************************

You have tried to change the API from what has been previously released in

an SDK.  Please fix the errors listed above.

******************************