#!/bin/bash
set -e

function validateDomains {
    INPUT="$1"
    (INPUT=$(echo "$INPUT"| sed 's@;@,@g' | sed 's@ @,@g'); IFS=','; for DOMAIN in $INPUT; do echo "$DOMAIN" | xargs; done) | while read line; do echo "$line"; done | sort -u | while read line; do echo $line | grep -P '(?=^.{4,253}$)(^(?:[a-zA-Z0-9](?:(?:[a-zA-Z0-9\-]){0,61}[a-zA-Z0-9])?\.)+[a-zA-Z]{2,}$)'; done | tr "\n" "," | sed 's@,$@@g'
}

source /mnt/repo-base/scripts/bootstrap-commons.sh

cd "/mnt/repo-base/"
ENVFILE="/mnt/repo-base/.env"

while true;
do
    rm -f "$ENVFILE"
    # Create .env file
    generateEnvFile deployment/questionnaire/questionnaire.dat deployment/questionnaire/answers.dat "$ENVFILE"
    source /mnt/repo-base/scripts/base.sh

    VALIDATED_DOMAIN=$(validateDomains "$DOMAIN")

    echo "$VALIDATED_DOMAIN" | grep -q "," && (echo "Error: You can specify only a single management domain, use the additional domains question for more domains - try again") && continue

    if [ -z "$VALIDATED_DOMAIN" ]; then
        echo "Error : Entering at least the managemnt domain is mandatory - try again"
        continue
    fi

    VALIDATED_ADD_DOMAINS=$(validateDomains "$(echo $ADD_DOMAINS | sed "s@$VALIDATED_DOMAIN@@g")")

    if [ -z "$VALIDATED_ADD_DOMAINS" ]; then
        VALIDATED_ADD_DOMAINS="[N/A]"
    fi

    echo "Your management domain is: $VALIDATED_DOMAIN"
    echo "Your additional domains are: $VALIDATED_ADD_DOMAINS"
    read -r -p "Is this correct? (yes or no) " response   
    if [[ $response =~ ^([yY][eE][sS]|[yY])$ ]]; then
        break
    fi
done

sed -i '/DOMAIN/d' "$ENVFILE"
echo "DOMAIN=$VALIDATED_DOMAIN" >> "$ENVFILE"
if [ "$VALIDATED_ADD_DOMAINS" == "[N/A]" ]; then
    sed -i '/ADD_DOMAINS/d' "$ENVFILE"
    echo "ADD_DOMAINS=$VALIDATED_DOMAIN" >> "$ENVFILE"
elif ! echo "$VALIDATED_ADD_DOMAINS" | grep -q "$VALIDATED_DOMAIN" ; then
    sed -i '/ADD_DOMAINS/d' "$ENVFILE"
    echo "ADD_DOMAINS=$VALIDATED_ADD_DOMAINS,$VALIDATED_DOMAIN" >> "$ENVFILE"
fi

echo "WELCOME_SECRET_SHA=$(echo -n $WELCOME_SECRET |sha1sum | awk '{print $1}')" >> "$ENVFILE"
echo "WEBSITE_SECRET=not_defined" >> "$ENVFILE"

source /mnt/repo-base/scripts/base.sh

DC_DIR="templates/docker-compose/"
cat "${DC_DIR}docker-compose.yml" > docker-compose.yml
NUM_CERTIFICATES="3"

# To be constructed repo specific
echo "VHOSTS_ACCOUNTS=welcome.$DOMAIN" >> "$ENVFILE"
echo "SMTP_FROM=welcome@$DOMAIN" >> "$ENVFILE"
echo "SMTP_HOST=mail.$DOMAIN" >> "$ENVFILE"

VIRTUAL_HOST=$(echo "$ADD_DOMAINS" | tr "," "\n" | while read line; do echo "autoconfig.$line,autodiscover.$line"; done | tr "\n" "," | sed 's/.$//g')

echo "VIRTUAL_HOST=$VIRTUAL_HOST" >> "$ENVFILE"

# finished .env file generation

# fill autorenew config
rm -f "/mnt/repo-base/config/letsencrypt/autorenew/ssl-domains.dat"
echo "$DOMAIN,$VIRTUAL_HOST,mail.$DOMAIN,spam.$DOMAIN,welcome.$DOMAIN" | tr "," "\n" | while read CURDOMAIN; do
    echo "$CURDOMAIN" >> config/letsencrypt/autorenew/ssl-domains.dat
:; done


# Configure automx
cat templates/automx/automx.conf | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/automx/automx.conf"
chown www-data:www-data "config/automx/automx.conf"

# Configure rspamd whitelist
cat templates/mail/rspamd/ecloud/whitelist.sender.domain.map | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/mail/rspamd/ecloud/whitelist.sender.domain.map"

# Allow white/black lists editing
chown -R 107:109 "config/mail/rspamd/ecloud/"


# Configure nginx vhost

# automx
echo "$DOMAIN,$ADD_DOMAINS" | tr "," "\n" | while read CURDOMAIN; do
    cat "templates/nginx/sites-enabled/autoconfig.conf" | sed "s/@@@DOMAIN@@@/$CURDOMAIN/g" | sed "s/@@@SERVICE@@@/autoconfig/g" > "config/nginx/sites-enabled/autoconfig.$CURDOMAIN.conf"
    cat "templates/nginx/sites-enabled/autoconfig.conf" | sed "s/@@@DOMAIN@@@/$CURDOMAIN/g" | sed "s/@@@SERVICE@@@/autodiscover/g" > "config/nginx/sites-enabled/autodiscover.$CURDOMAIN.conf"
:; done

# other hosts
cat "templates/nginx/sites-enabled/nextcloud.conf" | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/nginx/sites-enabled/nextcloud.conf"
cat "templates/nginx/sites-enabled/postfixadmin.conf" | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/nginx/sites-enabled/postfixadmin.conf"
cat "templates/nginx/sites-enabled/rspamd.conf" | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/nginx/sites-enabled/rspamd.conf"
cat "templates/nginx/sites-enabled/welcome.conf" | sed "s/@@@DOMAIN@@@/$DOMAIN/g" > "config/nginx/sites-enabled/welcome.conf"

# confirm DNS is ready
echo ""
echo ""
echo "================================================================================================================================="
echo "Please setup the following DNS records for your domains before you proceed (subsequent steps will fail if a record is missing):"
echo "================================================================================================================================="
tempfile=$(mktemp /tmp/ecloud.dns.XXXXXX)
echo "RECORD,|,HOST,|,VALUE,|,Priority" >> "$tempfile"
echo "------,|,----,|,-----,|,--------" >> "$tempfile"
echo "A,|,mail.$DOMAIN,|,<Public IP>,|,-" >> "$tempfile"
echo "$ADD_DOMAINS" | tr "," "\n" | while read CURDOMAIN; do
    echo "A,|,$CURDOMAIN,|,<Public IP>,|,-" >> "$tempfile"
:; done
echo "$ADD_DOMAINS" | tr "," "\n" | while read CURDOMAIN; do
    echo "MX,|,$CURDOMAIN,|,mail.$DOMAIN,|,10" >> "$tempfile"
:; done
echo "PTR(For reverse DNS),|,<Public IP>,|,mail.$DOMAIN,|,-" >> "$tempfile"
echo ""
echo "$VIRTUAL_HOST,spam.$DOMAIN,welcome.$DOMAIN" | tr "," "\n" | while read CURDOMAIN; do
    echo "CNAME,|,$CURDOMAIN,|,mail.$DOMAIN,|,-" >> "$tempfile"
:; done
column "$tempfile" -t -s ","
rm "$tempfile"
echo "================================================================================================================================="
echo "================================================================================================================================="
echo ""

echo "Type 'yes' and hit ENTER to confirm that you have setup DNS properly before we continue:"
read CONFIRM
while [ "$CONFIRM" != "yes" ]
do
    read CONFIRM
done

# Verify DOMAIN lookup forward and reverse (very important)
IP=$(dig mail.$DOMAIN| grep mail.$DOMAIN | grep -v '^;' | awk '{ print $NF }')

if [ -z "$IP" ]
then
    echo "mail.$DOMAIN not resolving to IP"
    exit 1
fi
PTR=$(nslookup $IP | grep "name = mail.$DOMAIN" | wc -l)

if [ "1" != "$PTR" ]
then
    echo "$IP not resolving to mail.$DOMAIN (PTR record missing or wrong.."
    exit 1
fi

# Add NC_HOST_IP env variable to .env
echo "NC_HOST_IP=$IP" >> "$ENVFILE"

# Run LE cert request
bash scripts/ssl-renew.sh

# verify LE status
CTR_LE=$(find config/letsencrypt/certstore/live/mail.$DOMAIN/privkey.pem config/letsencrypt/certstore/live/spam.$DOMAIN/privkey.pem config/letsencrypt/certstore/live/welcome.$DOMAIN/privkey.pem 2>/dev/null| wc -l)
CTR_AC_LE=$(echo "$VIRTUAL_HOST" | tr "," "\n" | while read CURDOMAIN; do find config/letsencrypt/certstore/live/$CURDOMAIN/privkey.pem 2>/dev/null | grep $CURDOMAIN && echo found || echo missing; done  | grep missing | wc  -l)

if [ "$CTR_LE$CTR_AC_LE" = "${NUM_CERTIFICATES}0" ]
then
    echo "All LE certs present."
else
    echo "Verification of LE status failed. Some expected certificates are missing"
    echo "$CTR_LE of $NUM_CERTIFICATES certifcates found."
    echo "$CTR_AC_LE autoconfig/autodiscovery certificates are missing."
    exit 1
fi

# create nextcloud config
mkdir -p /mnt/repo-base/volumes/nextcloud/{html,data,log}
mkdir  "/mnt/repo-base/volumes/nextcloud/html/config/"
cat /mnt/repo-base/templates/nextcloud/config.php | sed "s/@@@DOMAIN@@@/$DOMAIN/g" | \
    sed "s/@@@DRIVE_SMTP_PASSWORD@@@/$DRIVE_SMTP_PASSWORD/g" | sed "s/@@@PFDB_DB@@@/$PFDB_DB/g" | \
    sed "s/@@@ECLOUD_ACCOUNTS_SECRET@@@/$ECLOUD_ACCOUNTS_SECRET/g" | \
    sed "s/@@@PFDB_USR@@@/$PFDB_USR/g" | sed "s/@@@DBPASS@@@/$PFDB_DBPASS/g" > \
    "/mnt/repo-base/volumes/nextcloud/html/config/config.php"
chown -R www-data: "/mnt/repo-base/volumes/nextcloud/"

docker-compose up -d

echo -e "\nHack: restart everything to ensure that database and nextcloud are initialized"
docker-compose restart

# needed to store accounts to create, and needs to be writable by welcome
touch /mnt/repo-base/volumes/accounts/auth.file
# needed to store created accounts, and needs to be writable by welcome
touch /mnt/repo-base/volumes/accounts/auth.file.done
ACCOUNTS_UID=$(docker-compose exec --user www-data welcome id -u | tr -d '\r')
chown "$ACCOUNTS_UID:$ACCOUNTS_UID" /mnt/repo-base/volumes/accounts/auth.file
chown "$ACCOUNTS_UID:$ACCOUNTS_UID" /mnt/repo-base/volumes/accounts/auth.file.done

printf "$(date): Waiting for Nextcloud to finish installation"
# sleep for 300 seconds
for i in {0..300}; do
  sleep 1
  printf "."
done

bash scripts/postinstall.sh