Merge "ARM: dts: msm: Enable OV5645 on CSI0"

		compatible = "ovti,ov5645";

		reg = <0x78 0x0>;

		qcom,slave-id = <0x78 0x300a 0x5645>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,sensor-name = "ov5645";

		cam_vdig-supply = <&vph_pwr_vreg>;

		qcom,cam-vreg-max-voltage = <2100000 0 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;

		gpios = <&msm_gpio 27 0>,

			<&msm_gpio 28 0>,

			<&msm_gpio 33 0>;

		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

					"CAM_RESET",

					"CAM_RESET1",

					"CAM_STANDBY";

		qcom,gpio-set-tbl-num = <1 1>;

		qcom,gpio-set-tbl-flags = <0 2>;

		qcom,gpio-set-tbl-delay = <1000 4000>;

		qcom,csi-lane-assign = <0x4320>;

		qcom,csi-lane-mask = <0x3>;

		qcom,sensor-position = <1>;

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		qcom,mclk-23880000;

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};