diff --git a/.gitignore b/.gitignore index cecb3b040cc17d22acdb9268e130a459e771608a..b93fb7eff94286c7a15d475fa581dac32a89b0db 100644 --- a/.gitignore +++ b/.gitignore @@ -27,6 +27,7 @@ *.gz *.lzma *.patch +*.gcno # # Top-level generic files diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl index e36986663570d6be1577365645c25b11e866c138..f3f37f141dbdb4a00ab621e07a9c1fa361a1f782 100644 --- a/Documentation/DocBook/mac80211.tmpl +++ b/Documentation/DocBook/mac80211.tmpl @@ -184,8 +184,6 @@ usage should require reading the full document. !Finclude/net/mac80211.h ieee80211_ctstoself_get !Finclude/net/mac80211.h ieee80211_ctstoself_duration !Finclude/net/mac80211.h ieee80211_generic_frame_duration -!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb -!Finclude/net/mac80211.h ieee80211_hdrlen !Finclude/net/mac80211.h ieee80211_wake_queue !Finclude/net/mac80211.h ieee80211_stop_queue !Finclude/net/mac80211.h ieee80211_wake_queues diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt index e8ca040ba2cff4bb5b938939f75c1bb97f0610af..2d735b0ae383b625c87f37ed2603ec829adf6746 100644 --- a/Documentation/block/data-integrity.txt +++ b/Documentation/block/data-integrity.txt @@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata scatter-gather lists. The controller will interleave the buffers on write and split them on -read. This means that the Linux can DMA the data buffers to and from +read. This means that Linux can DMA the data buffers to and from host memory without changes to the page cache. Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs @@ -66,7 +66,7 @@ software RAID5). The IP checksum is weaker than the CRC in terms of detecting bit errors. However, the strength is really in the separation of the data -buffers and the integrity metadata. These two distinct buffers much +buffers and the integrity metadata. These two distinct buffers must match up for an I/O to complete. The separation of the data and integrity metadata buffers as well as diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index f9ca389dddf49a7f1bc80c7e724b4a2ffa7e1ba4..1d7e9784439adee55d9d7e983f90e2006b7ef954 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -777,6 +777,18 @@ in cpuset directories: # /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4 # /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4 +To add a CPU to a cpuset, write the new list of CPUs including the +CPU to be added. To add 6 to the above cpuset: + +# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6 + +Similarly to remove a CPU from a cpuset, write the new list of CPUs +without the CPU to be removed. + +To remove all the CPUs: + +# /bin/echo "" > cpus -> clear cpus list + 2.3 Setting flags ----------------- diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index a52adfc9a57fe4d7b8cfbbecfa525df6d91906e1..3d1b0ab70c8ef3ed498eb00da7c68b5371d55ce6 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -25,7 +25,7 @@ use IO::Handle; "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", - "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" ); + "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" ); # Check args syntax() if (scalar(@ARGV) != 1); @@ -381,6 +381,57 @@ sub cx18 { $allfiles; } +sub mpc718 { + my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip'; + my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive"; + my $fwfile = "dvb-cx18-mpc718-mt352.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + wgetfile($archive, $url); + unzip($archive, $tmpdir); + + my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys"; + my $found = 0; + + open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n"; + binmode IN; + open OUT, '>', $fwfile; + binmode OUT; + { + # Block scope because we change the line terminator variable $/ + my $prevlen = 0; + my $currlen; + + # Buried in the data segment are 3 runs of almost identical + # register-value pairs that end in 0x5d 0x01 which is a "TUNER GO" + # command for the MT352. + # Pull out the middle run (because it's easy) of register-value + # pairs to make the "firmware" file. + + local $/ = "\x5d\x01"; # MT352 "TUNER GO" + + while () { + $currlen = length($_); + if ($prevlen == $currlen && $currlen <= 64) { + chop; chop; # Get rid of "TUNER GO" + s/^\0\0//; # get rid of leading 00 00 if it's there + printf OUT "$_"; + $found = 1; + last; + } + $prevlen = $currlen; + } + } + close OUT; + close IN; + if (!$found) { + unlink $fwfile; + die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n"; + } + $fwfile; +} + sub cx23885 { my $url = "http://linuxtv.org/downloads/firmware/"; diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f8cd450be9aa83a4a88cee408f79378ef575ce18..09e031c558875139c72874b1ab78f322ed34d25f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -458,3 +458,13 @@ Why: Remove the old legacy 32bit machine check code. This has been but the old version has been kept around for easier testing. Note this doesn't impact the old P5 and WinChip machine check handlers. Who: Andi Kleen + +---------------------------- + +What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be + exported interface anymore. +When: 2.6.33 +Why: cpu_policy_rwsem has a new cleaner definition making it local to + cpufreq core and contained inside cpufreq.c. Other dependent + drivers should not use it in order to safely avoid lockdep issues. +Who: Venkatesh Pallipadi diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt index e716aadb3a337006865cfdfd8e53511adb20e787..40ec633527600be750ef15ec4f8706c8bcae0f01 100644 --- a/Documentation/gcov.txt +++ b/Documentation/gcov.txt @@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the corresponding Makefile. +Problem: Files copied from sysfs appear empty or incomplete. +Cause: Due to the way seq_file works, some tools such as cp or tar + may not correctly copy files from sysfs. +Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links. + Alternatively use the mechanism shown in Appendix B. + Appendix A: gather_on_build.sh ============================== Sample script to gather coverage meta files on the build machine (see 6a): - #!/bin/bash KSRC=$1 @@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh Sample script to gather coverage data files on the test machine (see 6b): -#!/bin/bash +#!/bin/bash -e DEST=$1 GCDA=/sys/kernel/debug/gcov @@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then exit 1 fi -find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T - +TEMPDIR=$(mktemp -d) +echo Collecting data.. +find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \; +find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \; +find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \; +tar czf $DEST -C $TEMPDIR sys +rm -rf $TEMPDIR -if [ $? -eq 0 ] ; then - echo "$DEST successfully created, copy to build system and unpack with:" - echo " tar xfz $DEST" -else - echo "Could not create file $DEST" -fi +echo "$DEST successfully created, copy to build system and unpack with:" +echo " tar xfz $DEST" diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d77fbd8b79acd4f985dd3c6a9ef6424d7af76b96..dd1a6d4bb7473c4966a720c40e8af0492f9853c5 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1720,8 +1720,8 @@ and is between 256 and 4096 characters. It is defined in the file oprofile.cpu_type= Force an oprofile cpu type This might be useful if you have an older oprofile userland or if you want common events. - Format: { archperfmon } - archperfmon: [X86] Force use of architectural + Format: { arch_perfmon } + arch_perfmon: [X86] Force use of architectural perfmon on Intel CPUs instead of the CPU specific event set. diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 0112da3b9ab87f731006993c76e1a7fdc4eddcaa..89068030b01bbdb34392df6bf4fd8782d928ac57 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -16,13 +16,17 @@ Usage ----- CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel -thread scans the memory every 10 minutes (by default) and prints any new -unreferenced objects found. To trigger an intermediate scan and display -all the possible memory leaks: +thread scans the memory every 10 minutes (by default) and prints the +number of new unreferenced objects found. To display the details of all +the possible memory leaks: # mount -t debugfs nodev /sys/kernel/debug/ # cat /sys/kernel/debug/kmemleak +To trigger an intermediate memory scan: + + # echo scan > /sys/kernel/debug/kmemleak + Note that the orphan objects are listed in the order they were allocated and one object at the beginning of the list may cause other subsequent objects to be reported as orphan. @@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the /sys/kernel/debug/kmemleak file. The following parameters are supported: off - disable kmemleak (irreversible) - stack=on - enable the task stacks scanning + stack=on - enable the task stacks scanning (default) stack=off - disable the tasks stacks scanning - scan=on - start the automatic memory scanning thread + scan=on - start the automatic memory scanning thread (default) scan=off - stop the automatic memory scanning thread - scan= - set the automatic memory scanning period in seconds (0 - to disable it) + scan= - set the automatic memory scanning period in seconds + (default 600, 0 to stop the automatic scanning) + scan - trigger a memory scan Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on the kernel command line. +Memory may be allocated or freed before kmemleak is initialised and +these actions are stored in an early log buffer. The size of this buffer +is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option. + Basic Algorithm --------------- diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index cf0e3ce0d52682171688c07974e90fce66036d5f..c1a5aad3c75a905d470725fc5795775227c4a4fd 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[]) { "lsb", 0, 0, 'L' }, { "cs-high", 0, 0, 'C' }, { "3wire", 0, 0, '3' }, + { "no-cs", 0, 0, 'N' }, + { "ready", 0, 0, 'R' }, { NULL, 0, 0, 0 }, }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL); if (c == -1) break; @@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[]) case '3': mode |= SPI_3WIRE; break; + case 'N': + mode |= SPI_NO_CS; + break; + case 'R': + mode |= SPI_READY; + break; default: print_usage(argv[0]); break; diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 873630e7e53eb5859b1cd722c0818865d895cd20..014d255231fc7cea3eb73378788e0ddae551eb88 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -66,3 +66,4 @@ 68 -> Terratec AV350 (em2860) [0ccd:0084] 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] 70 -> Evga inDtube (em2882) + 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX index dbe3377754af5ab0d36c5665a3a118e02fc5621f..f37b46d348614be9fc5a0b54a8c303617e979d56 100644 --- a/Documentation/x86/00-INDEX +++ b/Documentation/x86/00-INDEX @@ -2,3 +2,5 @@ - this file mtrr.txt - how to use x86 Memory Type Range Registers to increase performance +exception-tables.txt + - why and how Linux kernel uses exception tables on x86 diff --git a/Documentation/exception.txt b/Documentation/x86/exception-tables.txt similarity index 75% rename from Documentation/exception.txt rename to Documentation/x86/exception-tables.txt index 2d5aded64247343e1cfa13ded99c3a1e0204517a..32901aa36f0a99f7c087aa7c510bbceb0ec14a89 100644 --- a/Documentation/exception.txt +++ b/Documentation/x86/exception-tables.txt @@ -1,123 +1,123 @@ - Kernel level exception handling in Linux 2.1.8 + Kernel level exception handling in Linux Commentary by Joerg Pommnitz -When a process runs in kernel mode, it often has to access user -mode memory whose address has been passed by an untrusted program. +When a process runs in kernel mode, it often has to access user +mode memory whose address has been passed by an untrusted program. To protect itself the kernel has to verify this address. -In older versions of Linux this was done with the -int verify_area(int type, const void * addr, unsigned long size) +In older versions of Linux this was done with the +int verify_area(int type, const void * addr, unsigned long size) function (which has since been replaced by access_ok()). -This function verified that the memory area starting at address +This function verified that the memory area starting at address 'addr' and of size 'size' was accessible for the operation specified -in type (read or write). To do this, verify_read had to look up the -virtual memory area (vma) that contained the address addr. In the -normal case (correctly working program), this test was successful. +in type (read or write). To do this, verify_read had to look up the +virtual memory area (vma) that contained the address addr. In the +normal case (correctly working program), this test was successful. It only failed for a few buggy programs. In some kernel profiling tests, this normally unneeded verification used up a considerable amount of time. -To overcome this situation, Linus decided to let the virtual memory +To overcome this situation, Linus decided to let the virtual memory hardware present in every Linux-capable CPU handle this test. How does this work? -Whenever the kernel tries to access an address that is currently not -accessible, the CPU generates a page fault exception and calls the -page fault handler +Whenever the kernel tries to access an address that is currently not +accessible, the CPU generates a page fault exception and calls the +page fault handler void do_page_fault(struct pt_regs *regs, unsigned long error_code) -in arch/i386/mm/fault.c. The parameters on the stack are set up by -the low level assembly glue in arch/i386/kernel/entry.S. The parameter -regs is a pointer to the saved registers on the stack, error_code +in arch/x86/mm/fault.c. The parameters on the stack are set up by +the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter +regs is a pointer to the saved registers on the stack, error_code contains a reason code for the exception. -do_page_fault first obtains the unaccessible address from the CPU -control register CR2. If the address is within the virtual address -space of the process, the fault probably occurred, because the page -was not swapped in, write protected or something similar. However, -we are interested in the other case: the address is not valid, there -is no vma that contains this address. In this case, the kernel jumps -to the bad_area label. - -There it uses the address of the instruction that caused the exception -(i.e. regs->eip) to find an address where the execution can continue -(fixup). If this search is successful, the fault handler modifies the -return address (again regs->eip) and returns. The execution will +do_page_fault first obtains the unaccessible address from the CPU +control register CR2. If the address is within the virtual address +space of the process, the fault probably occurred, because the page +was not swapped in, write protected or something similar. However, +we are interested in the other case: the address is not valid, there +is no vma that contains this address. In this case, the kernel jumps +to the bad_area label. + +There it uses the address of the instruction that caused the exception +(i.e. regs->eip) to find an address where the execution can continue +(fixup). If this search is successful, the fault handler modifies the +return address (again regs->eip) and returns. The execution will continue at the address in fixup. Where does fixup point to? -Since we jump to the contents of fixup, fixup obviously points -to executable code. This code is hidden inside the user access macros. -I have picked the get_user macro defined in include/asm/uaccess.h as an -example. The definition is somewhat hard to follow, so let's peek at +Since we jump to the contents of fixup, fixup obviously points +to executable code. This code is hidden inside the user access macros. +I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h +as an example. The definition is somewhat hard to follow, so let's peek at the code generated by the preprocessor and the compiler. I selected -the get_user call in drivers/char/console.c for a detailed examination. +the get_user call in drivers/char/sysrq.c for a detailed examination. -The original code in console.c line 1405: +The original code in sysrq.c line 587: get_user(c, buf); The preprocessor output (edited to become somewhat readable): ( - { - long __gu_err = - 14 , __gu_val = 0; - const __typeof__(*( ( buf ) )) *__gu_addr = ((buf)); - if (((((0 + current_set[0])->tss.segment) == 0x18 ) || - (((sizeof(*(buf))) <= 0xC0000000UL) && - ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf))))))) + { + long __gu_err = - 14 , __gu_val = 0; + const __typeof__(*( ( buf ) )) *__gu_addr = ((buf)); + if (((((0 + current_set[0])->tss.segment) == 0x18 ) || + (((sizeof(*(buf))) <= 0xC0000000UL) && + ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf))))))) do { - __gu_err = 0; - switch ((sizeof(*(buf)))) { - case 1: - __asm__ __volatile__( - "1: mov" "b" " %2,%" "b" "1\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %3,%0\n" - " xor" "b" " %" "b" "1,%" "b" "1\n" - " jmp 2b\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,3b\n" + __gu_err = 0; + switch ((sizeof(*(buf)))) { + case 1: + __asm__ __volatile__( + "1: mov" "b" " %2,%" "b" "1\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl %3,%0\n" + " xor" "b" " %" "b" "1,%" "b" "1\n" + " jmp 2b\n" + ".section __ex_table,\"a\"\n" + " .align 4\n" + " .long 1b,3b\n" ".text" : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *) - ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ; - break; - case 2: + ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ; + break; + case 2: __asm__ __volatile__( - "1: mov" "w" " %2,%" "w" "1\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %3,%0\n" - " xor" "w" " %" "w" "1,%" "w" "1\n" - " jmp 2b\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,3b\n" + "1: mov" "w" " %2,%" "w" "1\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl %3,%0\n" + " xor" "w" " %" "w" "1,%" "w" "1\n" + " jmp 2b\n" + ".section __ex_table,\"a\"\n" + " .align 4\n" + " .long 1b,3b\n" ".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *) - ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )); - break; - case 4: - __asm__ __volatile__( - "1: mov" "l" " %2,%" "" "1\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %3,%0\n" - " xor" "l" " %" "" "1,%" "" "1\n" - " jmp 2b\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" " .long 1b,3b\n" + ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )); + break; + case 4: + __asm__ __volatile__( + "1: mov" "l" " %2,%" "" "1\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl %3,%0\n" + " xor" "l" " %" "" "1,%" "" "1\n" + " jmp 2b\n" + ".section __ex_table,\"a\"\n" + " .align 4\n" " .long 1b,3b\n" ".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *) - ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err)); - break; - default: - (__gu_val) = __get_user_bad(); - } - } while (0) ; - ((c)) = (__typeof__(*((buf))))__gu_val; + ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err)); + break; + default: + (__gu_val) = __get_user_bad(); + } + } while (0) ; + ((c)) = (__typeof__(*((buf))))__gu_val; __gu_err; } ); @@ -127,12 +127,12 @@ see what code gcc generates: > xorl %edx,%edx > movl current_set,%eax - > cmpl $24,788(%eax) - > je .L1424 + > cmpl $24,788(%eax) + > je .L1424 > cmpl $-1073741825,64(%esp) - > ja .L1423 + > ja .L1423 > .L1424: - > movl %edx,%eax + > movl %edx,%eax > movl 64(%esp),%ebx > #APP > 1: movb (%ebx),%dl /* this is the actual user access */ @@ -149,17 +149,17 @@ see what code gcc generates: > .L1423: > movzbl %dl,%esi -The optimizer does a good job and gives us something we can actually -understand. Can we? The actual user access is quite obvious. Thanks -to the unified address space we can just access the address in user +The optimizer does a good job and gives us something we can actually +understand. Can we? The actual user access is quite obvious. Thanks +to the unified address space we can just access the address in user memory. But what does the .section stuff do????? To understand this we have to look at the final kernel: > objdump --section-headers vmlinux - > + > > vmlinux: file format elf32-i386 - > + > > Sections: > Idx Name Size VMA LMA File off Algn > 0 .text 00098f40 c0100000 c0100000 00001000 2**4 @@ -198,18 +198,18 @@ final kernel executable: The whole user memory access is reduced to 10 x86 machine instructions. The instructions bracketed in the .section directives are no longer -in the normal execution path. They are located in a different section +in the normal execution path. They are located in a different section of the executable file: > objdump --disassemble --section=.fixup vmlinux - > + > > c0199ff5 <.fixup+10b5> movl $0xfffffff2,%eax > c0199ffa <.fixup+10ba> xorb %dl,%dl > c0199ffc <.fixup+10bc> jmp c017e7a7 And finally: > objdump --full-contents --section=__ex_table vmlinux - > + > > c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0 ................ > c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0 ................ > c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0 ................ @@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions ended up in the .fixup section of the object file and the addresses .long 1b,3b ended up in the __ex_table section of the object file. 1b and 3b -are local labels. The local label 1b (1b stands for next label 1 -backward) is the address of the instruction that might fault, i.e. +are local labels. The local label 1b (1b stands for next label 1 +backward) is the address of the instruction that might fault, i.e. in our case the address of the label 1 is c017e7a5: the original assembly code: > 1: movb (%ebx),%dl and linked in vmlinux : > c017e7a5 movb (%ebx),%dl @@ -254,7 +254,7 @@ The assembly code becomes the value pair > c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5 ................ ^this is ^this is - 1b 3b + 1b 3b c017e7a5,c0199ff5 in the exception table of the kernel. So, what actually happens if a fault from kernel mode with no suitable @@ -266,9 +266,9 @@ vma occurs? 3.) CPU calls do_page_fault 4.) do page fault calls search_exception_table (regs->eip == c017e7a5); 5.) search_exception_table looks up the address c017e7a5 in the - exception table (i.e. the contents of the ELF section __ex_table) + exception table (i.e. the contents of the ELF section __ex_table) and returns the address of the associated fault handle code c0199ff5. -6.) do_page_fault modifies its own return address to point to the fault +6.) do_page_fault modifies its own return address to point to the fault handle code and returns. 7.) execution continues in the fault handling code. 8.) 8a) EAX becomes -EFAULT (== -14) diff --git a/MAINTAINERS b/MAINTAINERS index 3ba68dc9fe48d4c472271581b82c30494ce01290..9d1601ec13113037859a88c5174e5b475fa194fe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -867,12 +867,22 @@ M: alex@shark-linux.de W: http://www.shark-linux.de/shark.html S: Maintained +ARM/SAMSUNG ARM ARCHITECTURES +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/plat-s3c/ +F: arch/arm/plat-s3c24xx/ + ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-linux@fluff.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained +F: arch/arm/mach-s3c2410/ ARM/S3C2440 ARM ARCHITECTURE P: Ben Dooks @@ -880,6 +890,39 @@ M: ben-linux@fluff.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained +F: arch/arm/mach-s3c2440/ + +ARM/S3C2442 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c2442/ + +ARM/S3C2443 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c2443/ + +ARM/S3C6400 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c6400/ + +ARM/S3C6410 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c6410/ ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT P: Lennert Buytenhek @@ -2087,9 +2130,9 @@ F: drivers/edac/i5400_edac.c EDAC-I82975X P: Ranganathan Desikan -M: rdesikan@jetzbroadband.com +M: ravi@jetztechnologies.com P: Arvind R. -M: arvind@acarlab.com +M: arvind@jetztechnologies.com L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained @@ -2808,7 +2851,9 @@ S: Maintained IA64 (Itanium) PLATFORM P: Tony Luck +P: Fenghua Yu M: tony.luck@intel.com +M: fenghua.yu@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git @@ -2886,7 +2931,7 @@ P: Dmitry Eremin-Solenikov M: dbaryshkov@gmail.com P: Sergey Lapin M: slapin@ossfans.org -L: linux-zigbee-devel@lists.sourceforge.net +L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git S: Maintained @@ -4362,7 +4407,7 @@ W: http://www.nongnu.org/orinoco/ S: Maintained F: drivers/net/wireless/orinoco/ -OSD LIBRARY +OSD LIBRARY and FILESYSTEM P: Boaz Harrosh M: bharrosh@panasas.com P: Benny Halevy @@ -4371,6 +4416,9 @@ L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git S: Maintained +F: drivers/scsi/osd/ +F: drivers/include/scsi/osd_* +F: fs/exofs/ P54 WIRELESS DRIVER P: Michael Wu @@ -5533,8 +5581,8 @@ F: drivers/staging/ STARFIRE/DURALAN NETWORK DRIVER P: Ion Badulescu -M: ionut@cs.columbia.edu -S: Maintained +M: ionut@badula.org +S: Odd Fixes F: drivers/net/starfire* STARMODE RADIO IP (STRIP) PROTOCOL DRIVER @@ -5758,17 +5806,17 @@ P: Jiri Kosina M: trivial@kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained -F: drivers/char/tty_* -F: drivers/serial/serial_core.c -F: include/linux/serial_core.h -F: include/linux/serial.h -F: include/linux/tty.h TTY LAYER P: Alan Cox M: alan@lxorguk.ukuu.org.uk S: Maintained T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ +F: drivers/char/tty_* +F: drivers/serial/serial_core.c +F: include/linux/serial_core.h +F: include/linux/serial.h +F: include/linux/tty.h TULIP NETWORK DRIVERS P: Grant Grundler @@ -5806,7 +5854,7 @@ UBI FILE SYSTEM (UBIFS) P: Artem Bityutskiy M: dedekind@infradead.org P: Adrian Hunter -M: ext-adrian.hunter@nokia.com +M: adrian.hunter@nokia.com L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubifs-2.6.git W: http://www.linux-mtd.infradead.org/doc/ubifs.html diff --git a/Makefile b/Makefile index d1216fea0c922bf70de0203d3a51124a825c98c4..bbe8453baa749253a4d14121f73dc5de7dc71fca 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* @@ -140,15 +140,13 @@ _all: modules endif srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -TOPDIR := $(srctree) -# FIXME - TOPDIR is obsolete, use srctree/objtree objtree := $(CURDIR) src := $(srctree) obj := $(objtree) VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) -export srctree objtree VPATH TOPDIR +export srctree objtree VPATH # SUBARCH tells the usermode build what the underlying arch is. That is set @@ -344,7 +342,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ - -Werror-implicit-function-declaration + -Werror-implicit-function-declaration \ + -Wno-format-security KBUILD_AFLAGS := -D__ASSEMBLY__ # Read KERNELRELEASE from include/config/kernel.release (if it exists) @@ -566,7 +565,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,) # disable invalid "can't wrap" optimizations for signed / pointers -KBUILD_CFLAGS += $(call cc-option,-fwrapv) +KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) # revert to pre-gcc-4.4 behaviour of .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 06c5c7a4afd3f6617440cdbcf669d70d591a0d44..b663f1f10b6a1011c7645580300951b977029acd 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #ifndef MODULE #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #else /* * To calculate addresses of locally defined variables, GCC uses 32-bit @@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; : "=&r"(__ptr), "=&r"(tmp_gp)); \ (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) -#define PER_CPU_ATTRIBUTES __used +#define PER_CPU_DEF_ATTRIBUTES __used #endif /* MODULE */ @@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #endif /* SMP */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index d069526bd7673f9ead6eb33e825782ea690e2fb0..60c83abfde7027832e0e7609ac7e032accb66386 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -37,6 +37,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .addr_limit = KERNEL_DS, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 1e9ad52c460ec293aa70f9cbc5bb3094adc08d74..e072041d19f8ba97f15ee6922ee5955e4db36930 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a71fd941ade7cdd82610b62a1109a6dc04615907..a89e4734b8f0b6a966b7dd2bba0d1af32896b467 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C_PORT - depends on DEBUG_LL && PLAT_S3C - bool "Kernel low-level debugging messages via S3C UART" - help - Say Y here if you want debug print routines to go to one of the - S3C internal UARTs. The chosen UART must have been configured - before it is used. - config DEBUG_S3C_UART depends on PLAT_S3C int "S3C UART to use for low-level debug" diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66f239db6bec52dd8f88ffa1a8c44603b55..605a8462f17263cb2547d16dcdd1e73f37d3034a 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # -# AT91RM9200 Implementations +# AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# IPMI +# Memory mapped GPIO expanders: # -# CONFIG_IPMI_HANDLER is not set # -# Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver +# PCI GPIO expanders: # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# SPI GPIO expanders: # -# CONFIG_AT91_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Misc devices +# Sonics Silicon Backplane # +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set # -# USB HID Boot Protocol drivers +# also be needed; see USB_STORAGE Help for more info # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices +# USB port drivers # -# CONFIG_USB_DABUSB is not set +# CONFIG_USB_SERIAL is not set # -# Video4Linux support is needed for USB Multimedia device support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB Network Adapters +# OTG and related infrastructure # -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB port drivers +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Serial Converter support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_SERIAL is not set +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB Miscellaneous drivers +# RTC interfaces # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# USB DSL modem support +# SPI RTC drivers # # -# USB Gadget Support +# Platform RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# MMC/SD Card support +# on-CPU RTC drivers # -# CONFIG_MMC is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2d58b8fe59bedb90791403301c2ffe4384e421f8..b49810461e41f7e90b57c9cb8de2ff833cbe2d49 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y +CONFIG_MACH_MINI2440=y # # S3C2442 Machines @@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 2e8fa50e9a09a190d89c01d38b41e5733dcc2715..32860609e057764caa9c1b1f34331717c4dfb734 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 07dfb98df4f0798da3b02a9497c0a32b081ff3be..9d32faef05f6e1b183f5d5fc23f4728413aa2b88 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_S3C_PORT is not set CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e1211470f85c603bd5498dfd3f27511535d..4762d900129841d637604195ecb8aaf4effcd218 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 00:16:59 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +79,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,20 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index be962c1349c4aa17a65f4cd364fd6221f1ea83bc..9c746af1bf6e150ae19acebe961b0a0c116b5d45 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -12,7 +12,7 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d6416bda447da0a64276ab2d302ff785cd19..c433c6c73112a70f379d954cdfb1ec07d19c86f3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -285,15 +285,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: * - * We support up to 32GB of swap on 4k machines + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <--- type --> 0 0 + * + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 2 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------------ offset -------------------------> 1 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 4f8848260ee2b85b4256b9762aeb7ce68e29ef38..73394e50cbca26e4198349de503fd18554f331d6 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -73,7 +73,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .flags = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 096f600dc8d84e25603f9269cbfebeab634ac4d6..b7c3490eaa24adb04bc7e7b2f971f5980f245221 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -98,17 +98,6 @@ unlock: return 0; } -/* Handle bad interrupts */ -static struct irq_desc bad_irq_desc = { - .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), -}; - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (irq >= NR_IRQS) - handle_bad_irq(irq, &bad_irq_desc); - else + if (unlikely(irq >= NR_IRQS)) { + if (printk_ratelimit()) + printk(KERN_WARNING "Bad IRQ%u\n", irq); + ack_bad_irq(irq); + } else { generic_handle_irq(irq); + } /* AT91 specific workaround */ irq_finish(irq); @@ -165,10 +157,6 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; -#ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.node = smp_processor_id(); -#endif init_arch_irq(); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4340bf3d2c84a8feae21eea058283f143640a698..69371028a2025a7f7b2f52fb32cdabadeae728e7 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #include #include #include +#include OUTPUT_ARCH(arm) ENTRY(stext) @@ -63,7 +64,7 @@ SECTIONS usr/built-in.o(.init.ramfs) __initramfs_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __per_cpu_load = .; __per_cpu_start = .; *(.data.percpu.page_aligned) @@ -73,7 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif } @@ -118,7 +119,7 @@ SECTIONS *(.got) /* Global offset table */ } - RODATA + RO_DATA(PAGE_SIZE) _etext = .; /* End of text and rodata section */ @@ -158,17 +159,17 @@ SECTIONS *(.data.init_task) #ifdef CONFIG_XIP_KERNEL - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; *(.data.nosave) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; /* diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index cc270beadd5d67bea4389fd6eed8113177bb3135..a55398ed1211d932266ac4ebace286ffe53490df 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include #include @@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = { } }; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA30, + .code = BTN_3, + .desc = "Button 3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA31, + .code = BTN_4, + .desc = "Button 4", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA30, 1); + at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ + at91_set_deglitch(AT91_PIN_PA31, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -245,6 +297,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 35e12a49d1a684372f736fe374abed15763cd6bd..f6b5672cabd6377e6fdb8cc9b9531c565c72042a 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { if (on) - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ + at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ else - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ } /* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, .default_monspecs = &at91fb_default_monspecs, .atmel_lcdfb_power_control = at91_lcdc_power_control, .guard_time = 1, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, }; #else diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e70fc7c66bbb63d0b8b28d59d3e404ac9263a5f7..ed2a48a9ce74b51634514b0d2e4eee8ec1802c49 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #define ADS7846_PENDOWN_GPIO 15 @@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .dma_mask = 0xffffffff, + .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, .get_cover_state = nokia770_mmc_get_cover_state, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 0af4d6c85b4763cad50a8af100b1a0045f47c90d..6810b4aeb02cd8d8e7d34de769772b3f8c81b3e4 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU" ); +MODULE_AUTHOR("Hiroshi DOYU "); MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index da93b86234ed47d7ef1546d55e98072c0abc913d..9a0bf6744a057518971f22d6d808c0f4c7af152b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, }; static void __init board_onenand_init(void) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 2fd22f9c5f0e785e694075efbccca830f52b397e..54fec53a48e7a8e4d5cabe7fade86e184f72df92 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = { static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) { struct gpmc_timings t; + u32 reg; + int err; const int t_cer = 15; const int t_avdp = 12; @@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - return gpmc_cs_set_timings(cs, &t); + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + + return 0; } static void set_onenand_cfg(void __iomem *onenand_base, int latency, @@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } else if (cfg->flags & ONENAND_SYNC_READWRITE) { sync_read = 1; sync_write = 1; - } + } else + return omap2_onenand_set_async_mode(cs, onenand_base); if (!freq) { /* Very first call freq is not known */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 458990e20c60db3a7f97d5b74ee33cee71496c78..a98201cc265cc08f5189b04fac3cb178212e0038 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci) } EXPORT_SYMBOL(omap_chip_is); +int omap_type(void) +{ + u32 val = 0; + + if (cpu_is_omap24xx()) + val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + else if (cpu_is_omap34xx()) + val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + else { + pr_err("Cannot detect omap type!\n"); + goto out; + } + + val &= OMAP2_DEVICETYPE_MASK; + val >>= 8; + +out: + return val; +} +EXPORT_SYMBOL(omap_type); + + /*----------------------------------------------------------------------------*/ #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index fd5b8a5925cc5abaa3193066a26f9f35af1e53e4..6f71f3730c97789d461880912de06abc5861fa58 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - mbox_dsp_info.irq = platform_get_irq(pdev, 0); - if (mbox_dsp_info.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; goto err_dsp; } + mbox_dsp_info.irq = ret; ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); if (ret) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 9756a878fd90263c5ddd4fcfd7a1d6dc60228c77..1541fd4c8d0fd0b28bacf30eca96853f7da04a3d 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { int ret = 0; - struct twl_mmc_controller *c = &hsmmc[1]; + struct twl_mmc_controller *c = NULL; struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; + + for (i = 1; i < ARRAY_SIZE(hsmmc); i++) { + if (mmc == hsmmc[i].mmc) { + c = &hsmmc[i]; + break; + } + } + + if (c == NULL) + return -ENODEV; /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 6a5bc3021bdb6218a5ffb31a0229b797f3994797..ec71a69657867edcbc7ffb79a2eda78d36f73bf3 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -48,8 +48,6 @@ #include #include -#include - #include #include #include @@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ }, }; diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index e23b581aa0e169dff61e4b58c4c8c73370277f5e..0fb385bd9cd9c44eaa164cfe14d6721063eab8d3 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { */ .name = "neo1973-nand", .nr_chips = 1, - .use_bbt = 1, - .force_soft_ecc = 1, + .flash_bbt = 1, }, }; diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b30166c1d3a1146725ddfa3a840e34..111f7ea32b384bd6e492d1cb1c0cf9635632c035 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48edd8c2ce951cb8ac5b3272e962785d6bae..ac5c80062b704b791d0d9af9be34e7484f8d4311 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec265b369f7929ea5bd841f4e97a6ac5b38..7677a4a1cef26f0df05e5db328cf7134bd27e0ee 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } + /* Enable smartidle idlemodes and autoidle */ + if (cpu_is_omap34xx()) { + u32 v = dma_read(OCP_SYSCONFIG); + v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | + DMA_SYSCONFIG_SIDLEMODE_MASK | + DMA_SYSCONFIG_AUTOIDLE); + v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_AUTOIDLE); + dma_write(v , OCP_SYSCONFIG); + } + + /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7fd89ba8d3b5939684ab6999a12fc19c5430b31e..26b387c1242393e9bd5450a6751d1ed9a2f3e54c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void) __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index fc60c4ebcc28af1d0d1fa80d583b7f35cf00feaf..285eaa3a82750bf986bb5ebe331f86b1e55177fe 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -30,6 +30,17 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + struct omap_chip_id { u8 oc; u8 type; @@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); -int omap_type(void); - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 8c1eae88737e9e6a0ca24d85a5b51c63050c156a..7b939cc01962034fd8003964be7bcc33d4e1a535 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -389,6 +389,21 @@ #define DMA_THREAD_FIFO_25 (0x02 << 14) #define DMA_THREAD_FIFO_50 (0x03 << 14) +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + /* Chaining modes*/ #ifndef CONFIG_ARCH_OMAP1 #define OMAP_DMA_STATIC_CHAIN 0x1 diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 3b28147205691a05df715d71a31d5e33fef858eb..73f483d56ca6a0180ea64d896f0979cf80318419 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -201,7 +201,7 @@ #define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) #ifdef __ASSEMBLER__ -#define IOMEM(x) x +#define IOMEM(x) (x) #else #define IOMEM(x) ((void __force __iomem *)(x)) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4cf449fa2cb54a8013cd8df951ab00af2c439905..4a03013990135c6c4faa2ee134a55c16feb26470 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 65006df3f1b750832b3832c3fb1ac62aa84b6a94..4ea73804d21e2ffcfbc4f5e314c9c27250e9d814 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -133,7 +133,12 @@ void __init omap_detect_sram(void) if (cpu_is_omap34xx()) { omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; - omap_sram_size = 0x8000; /* 32K */ + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + } else { + omap_sram_size = 0x8000; /* 32K */ + } } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 74bb7cb5da49571766c568ec3ad5ad90a4d434a4..0761766b183325cc3f5f0a7565445bc3ff94705a 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index b5b9c4d46e9a3b7e04745062d3086eb6d1947337..2e170827e0b078cd62db84541a7c23ebbf274672 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 636cb12711df8e98de68cce12d0196d10529da94..579a165c282708276c3511eb8f6734b3f3cc588a 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9edf7894eedd663fd5a2ad652515ce08c437f09d..da7a61728c18eacbe8acbbd5e4f8c36cf66ecc23 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -12,8 +12,7 @@ */ #include - -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index f34d0fc69ad81228add93dcd4db889aa4c44230c..86b9edc674133e4b85fcbe628fdf36ef4a0efa76 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -12,8 +12,7 @@ */ #include - -#include +#include #include #include diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h index 4442f8d2d4239a09470e04583aa9f168583246d9..fc42de5ca209ac5e9de0cfca9c1f35561f740be2 100644 --- a/arch/avr32/include/asm/thread_info.h +++ b/arch/avr32/include/asm/thread_info.h @@ -40,7 +40,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall \ } \ diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index 6e3d491184eab1d079b83a6cdaf33139f1365c1f..b91b2044af9c9660210bb9efd5f11ab60a08dcbc 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err) spin_lock_irq(&die_lock); bust_spinlocks(1); - printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG, + printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); + + printk(KERN_EMERG); + #ifdef CONFIG_PREEMPT - printk("PREEMPT "); + printk(KERN_CONT "PREEMPT "); #endif #ifdef CONFIG_FRAME_POINTER - printk("FRAME_POINTER "); + printk(KERN_CONT "FRAME_POINTER "); #endif if (current_cpu_data.features & AVR32_FEATURE_OCD) { unsigned long did = ocd_read(DID); - printk("chip: 0x%03lx:0x%04lx rev %lu\n", + printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n", (did >> 1) & 0x7ff, (did >> 12) & 0x7fff, (did >> 28) & 0xf); } else { - printk("cpu: arch %u r%u / core %u r%u\n", + printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n", current_cpu_data.arch_type, current_cpu_data.arch_revision, current_cpu_data.cpu_type, diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 2920087516f2a08175b54ed3086844434db937c9..2bbfdd950afc49c4623d876125b0a71dd7de4903 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -77,7 +77,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index d76618db50df8c4e3f4c06cb44d09906e5b41147..6a387eec6b65e5baa3bcfb247e037748bea6f587 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 298f023bcc09b91bbb34eb59262dbf60069b59e3..6136c33e919f79b700efcac55623eaf5a53f1911 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -408,13 +408,14 @@ static void __init print_memory_map(char *who) bfin_memmap.map[i].addr + bfin_memmap.map[i].size); switch (bfin_memmap.map[i].type) { case BFIN_MEMMAP_RAM: - printk("(usable)\n"); - break; + printk(KERN_CONT "(usable)\n"); + break; case BFIN_MEMMAP_RESERVED: - printk("(reserved)\n"); - break; - default: printk("type %lu\n", bfin_memmap.map[i].type); - break; + printk(KERN_CONT "(reserved)\n"); + break; + default: + printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type); + break; } } } @@ -614,19 +615,19 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" - KERN_INFO " fixedcode = 0x%p-0x%p\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" + " fixedcode = 0x%p-0x%p\n" + " text = 0x%p-0x%p\n" + " rodata = 0x%p-0x%p\n" + " bss = 0x%p-0x%p\n" + " data = 0x%p-0x%p\n" + " stack = 0x%p-0x%p\n" + " init = 0x%p-0x%p\n" + " available = 0x%p-0x%p\n" #ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" + " rootfs = 0x%p-0x%p\n" #endif #if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" + " DMA Zone = 0x%p-0x%p\n" #endif , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, _stext, _etext, @@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p) #endif printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1) - printk("Active "); + printk(KERN_CONT "Active "); else - printk("Off "); + printk(KERN_CONT "Off "); if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); + printk(KERN_CONT "and Enabled\n"); else - printk("and Disabled\n"); + printk(KERN_CONT "and Disabled\n"); #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) /* we need to initialize the Flashrom device here since we might diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index a8f1329c15a48befeb62f31a7b80603b263dda2d..3da60fb13ce46d8a45b5194e152985608c0cbaeb 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -29,7 +29,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include #include #include #include diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8eeb457ce5d5fc6cc6541a174be1c6989113328a..8a1caf2bb5b9defa94dc1fff7c6803afb3324fad 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) console_verbose(); oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE - printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + printk(KERN_EMERG "Double Fault\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { unsigned int cpu = smp_processor_id(); @@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M) verbose_printk(KERN_NOTICE "No trace since you do not have " - "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n" - KERN_NOTICE "\n"); + "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n"); else #endif dump_bfin_trace_buffer(); if (oops_in_progress) { /* Dump the current kernel stack */ - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + verbose_printk(KERN_NOTICE "Kernel Stack\n"); show_stack(current, NULL); print_modules(); #ifndef CONFIG_ACCESS_CHECK @@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) ret_addr = 0; if (!j && i % 8 == 0) - printk("\n" KERN_NOTICE "%p:",addr); + printk(KERN_NOTICE "%p:",addr); /* if it is an odd address, or zero, just skip it */ if (*addr & 0x1 || !*addr) @@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp) printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) - verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", + verbose_printk(KERN_NOTICE + "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", (void *)current->mm->start_code, (void *)current->mm->end_code, (void *)current->mm->start_data, @@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp) else verbose_printk(KERN_NOTICE "invalid mm\n"); } else - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE - "No Valid process in current context\n"); + verbose_printk(KERN_NOTICE + "No Valid process in current context\n"); #endif } @@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp) addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; addr++) { if (!((unsigned long)addr & 0xF)) - verbose_printk("\n" KERN_NOTICE "0x%p: ", addr); + verbose_printk(KERN_NOTICE "0x%p: ", addr); if (!get_instruction(&val, addr)) { val = 0; @@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp) oops_in_progress)){ verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n" - KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" - " better idea where it came from\n"); + verbose_printk(KERN_NOTICE +"The remaining message may be meaningless\n" +"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); #else /* If we are handling only one peripheral interrupt * and current mm and pid are valid, and the last error @@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp) verbose_printk(KERN_NOTICE "%s", linux_banner); - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); + verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", + print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", - (long)fp->seqstat, fp->ipend, fp->syscfg); + (long)fp->seqstat, fp->ipend, fp->syscfg); if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); @@ -1184,7 +1184,7 @@ unlock: verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n"); + verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", fp->r0, fp->r1, fp->r2, fp->r3); verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h index bc5b2935ca53a782c66acf4c371e87e46de39077..c3aade36c330400cb7dceb69051a422bb16ed34a 100644 --- a/arch/cris/include/asm/thread_info.h +++ b/arch/cris/include/asm/thread_info.h @@ -50,8 +50,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ #define INIT_THREAD_INFO(tsk) \ @@ -60,7 +58,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index a79fbd87021b02cf03663f7a06d680a58a24ceac..2ad962c7e88ebaddcbc11ed7a3a88f3e2e900385 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 8a5bd7a9c6f533b452b21de81127c476b1826765..b86e19c9b5b0a137c297f5a1a55e1be49b7d250b 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -7,6 +7,7 @@ config FRV default y select HAVE_IDE select HAVE_ARCH_TRACEHOOK + select HAVE_PERF_COUNTERS config ZONE_DMA bool diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 0409d981fd39501820618036f8667957ef7f205d..00a57af79afc6b7d6d45fd1046dd96abdf35184b 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +/* + * 64-bit atomic ops + */ +typedef struct { + volatile long long counter; +} atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static inline long long atomic64_read(atomic64_t *v) +{ + long long counter; + + asm("ldd%I1 %M1,%0" + : "=e"(counter) + : "m"(v->counter)); + return counter; +} + +static inline void atomic64_set(atomic64_t *v, long long i) +{ + asm volatile("std%I0 %1,%M0" + : "=m"(v->counter) + : "e"(i)); +} + +extern long long atomic64_inc_return(atomic64_t *v); +extern long long atomic64_dec_return(atomic64_t *v); +extern long long atomic64_add_return(long long i, atomic64_t *v); +extern long long atomic64_sub_return(long long i, atomic64_t *v); + +static inline long long atomic64_add_negative(long long i, atomic64_t *v) +{ + return atomic64_add_return(i, v) < 0; +} + +static inline void atomic64_add(long long i, atomic64_t *v) +{ + atomic64_add_return(i, v); +} + +static inline void atomic64_sub(long long i, atomic64_t *v) +{ + atomic64_sub_return(i, v); +} + +static inline void atomic64_inc(atomic64_t *v) +{ + atomic64_inc_return(v); +} + +static inline void atomic64_dec(atomic64_t *v) +{ + atomic64_dec_return(v); +} + +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) + /*****************************************************************************/ /* * exchange value with memory */ +extern uint64_t __xchg_64(uint64_t i, volatile void *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define xchg(ptr, x) \ @@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v); #define tas(ptr) (xchg((ptr), 1)) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) +#define atomic_xchg(v, new) (xchg(&(v)->counter, new)) +#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter)) +#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter)) static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) { diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h new file mode 100644 index 0000000000000000000000000000000000000000..ccf726e61b2e3cfbcdd076251fbef5df533cd8ef --- /dev/null +++ b/arch/frv/include/asm/perf_counter.h @@ -0,0 +1,17 @@ +/* FRV performance counter support + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PERF_COUNTER_H +#define _ASM_PERF_COUNTER_H + +#define PERF_COUNTER_INDEX_OFFSET 0 + +#endif /* _ASM_PERF_COUNTER_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index 7742ec000cc474d018c6378705395ce9e0b43688..efd22d9077ac3be05e0ce45b4d9cd5fa0f1a83ce 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -208,6 +208,8 @@ extern void free_initmem(void); * - if (*ptr == test) then orig = *ptr; *ptr = test; * - if (*ptr != test) then orig = *ptr; */ +extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define cmpxchg(ptr, test, new) \ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h index e8a5ed7be0212791674996fd16afeb4f38a6b751..e608e056bb5301582b44b13d2bba9d9ccabfc23a 100644 --- a/arch/frv/include/asm/thread_info.h +++ b/arch/frv/include/asm/thread_info.h @@ -56,8 +56,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -67,7 +65,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 96d78d5d2c41969b0b497846faff20a954f552bb..4a8fb427ce0a274a62aeffb989bbb195549d4ee8 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -341,10 +341,12 @@ #define __NR_inotify_init1 332 #define __NR_preadv 333 #define __NR_pwritev 334 +#define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_counter_open 336 #ifdef __KERNEL__ -#define NR_syscalls 335 +#define NR_syscalls 337 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 356e0e327a8923f87d366776f06e5b916852bf56..fde1e446b440e7a5027ec597437365350d18fda5 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1524,5 +1524,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_rt_tgsigqueueinfo /* 335 */ + .long sys_perf_counter_open syscall_table_size = (. - sys_call_table) diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 0316b3c50efff8814d0ba2b44156ddec40c886c4..a89803b58b9a970c47c0784ca1be398478de6142 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return); EXPORT_SYMBOL(__xchg_32); EXPORT_SYMBOL(__cmpxchg_32); #endif +EXPORT_SYMBOL(atomic64_add_return); +EXPORT_SYMBOL(atomic64_sub_return); +EXPORT_SYMBOL(__xchg_64); +EXPORT_SYMBOL(__cmpxchg_64); EXPORT_SYMBOL(__debug_bug_printk); EXPORT_SYMBOL(__delay_loops_MHz); diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile index 08be305c9f446c436a51aa6930d7cb8d2ebb24f6..0a377210c89b3117dec4145769b39998721a3f8a 100644 --- a/arch/frv/lib/Makefile +++ b/arch/frv/lib/Makefile @@ -4,5 +4,5 @@ lib-y := \ __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ - checksum.o memcpy.o memset.o atomic-ops.o \ - outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o + checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ + outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S index ee0ac905fb08ac271139ecd12de58e9fc9b61366..5e9e6ab5dd0e89ef2977743b847aa274da6f0890 100644 --- a/arch/frv/lib/atomic-ops.S +++ b/arch/frv/lib/atomic-ops.S @@ -163,11 +163,10 @@ __cmpxchg_32: ld.p @(gr11,gr0),gr8 orcr cc7,cc7,cc3 subcc gr8,gr9,gr7,icc0 - bne icc0,#0,1f + bnelr icc0,#0 cst.p gr10,@(gr11,gr0) ,cc3,#1 corcc gr29,gr29,gr0 ,cc3,#1 beq icc3,#0,0b -1: bralr .size __cmpxchg_32, .-__cmpxchg_32 diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S new file mode 100644 index 0000000000000000000000000000000000000000..b6194eeac127e4e07b6ae611544730a1554f9a0c --- /dev/null +++ b/arch/frv/lib/atomic64-ops.S @@ -0,0 +1,162 @@ +/* kernel atomic64 operations + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + + .text + .balign 4 + + +############################################################################### +# +# long long atomic64_inc_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_inc_return + .type atomic64_inc_return,@function +atomic64_inc_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addicc gr9,#1,gr9,icc0 + addxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_inc_return, .-atomic64_inc_return + +############################################################################### +# +# long long atomic64_dec_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_dec_return + .type atomic64_dec_return,@function +atomic64_dec_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subicc gr9,#1,gr9,icc0 + subxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_dec_return, .-atomic64_dec_return + +############################################################################### +# +# long long atomic64_add_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_add_return + .type atomic64_add_return,@function +atomic64_add_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addcc gr9,gr5,gr9,icc0 + addx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_add_return, .-atomic64_add_return + +############################################################################### +# +# long long atomic64_sub_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_sub_return + .type atomic64_sub_return,@function +atomic64_sub_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subcc gr9,gr5,gr9,icc0 + subx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_sub_return, .-atomic64_sub_return + +############################################################################### +# +# uint64_t __xchg_64(uint64_t i, uint64_t *v) +# +############################################################################### + .globl __xchg_64 + .type __xchg_64,@function +__xchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + cstd.p gr4,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __xchg_64, .-__xchg_64 + +############################################################################### +# +# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v) +# +############################################################################### + .globl __cmpxchg_64 + .type __cmpxchg_64,@function +__cmpxchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 + subcc gr8,gr4,gr0,icc0 + subcc.p gr9,gr5,gr0,icc1 + bnelr icc0,#0 + bnelr icc1,#0 + cstd.p gr10,@(gr12,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __cmpxchg_64, .-__cmpxchg_64 + diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c new file mode 100644 index 0000000000000000000000000000000000000000..2000feecd571773e256c82c999eb63c3a12136c1 --- /dev/null +++ b/arch/frv/lib/perf_counter.c @@ -0,0 +1,19 @@ +/* Performance counter handling + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include + +/* + * mark the performance counter as pending + */ +void set_perf_counter_pending(void) +{ +} diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h index 700014d2155fd8d82a4aeadb54c4b3ad682855bb..8bbc8b0ee45db3ad2ddb97f6c6c9be4b5550315f 100644 --- a/arch/h8300/include/asm/thread_info.h +++ b/arch/h8300/include/asm/thread_info.h @@ -36,7 +36,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index ae6922626bf49bbecae323b08e58478bcaeb4e07..8ce2e388e37c550573bfc2ca28033a43b7d74d50 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -48,7 +48,7 @@ struct thread_info { .flags = 0, \ .cpu = 0, \ .addr_limit = KERNEL_DS, \ - .preempt_count = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index ebf4e988e78ca7abd8e0397668dfeb5bc1ee47ae..d5764a3d74af2b73176444212e21f7747b35f679 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -65,7 +65,7 @@ static int __init esi_init (void) } if (!esi) - return -ENODEV;; + return -ENODEV; systab = __va(esi); diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index abce2468a40baeefd47bd8d39f5b61e9218b8f9e..f1782705b1f72caaf2cae0ae96ab869b84a8e0f3 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg) * /proc/perfmon interface, for debug only */ -#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1) +#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1) static void * pfm_proc_start(struct seq_file *m, loff_t *pos) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 92c9689b7d9764a80fc72b8a06f2c45b10443387..9daa87fdb0182e63cde61e6c78df1ff6dea41340 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 7053c55b7649337c19f5495c205a0d1584f33caa..e6676fca482876db425b281d476ad06ca64dc873 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms { static void salinfo_work_to_do(struct salinfo_data *data) { - down_trylock(&data->mutex); + (void)(down_trylock(&data->mutex) ?: 0); up(&data->mutex); } diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c index a8f84da04b49b8baa8daed4f49bdc2e178e240be..bb862fb224f2968df93206e37589612556988f6b 100644 --- a/arch/ia64/kvm/process.c +++ b/arch/ia64/kvm/process.c @@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu) if (vdcr & IA64_DCR_PP) { vpsr |= IA64_PSR_PP; } else { - vpsr &= ~IA64_PSR_PP;; + vpsr &= ~IA64_PSR_PP; } vcpu_set_psr(vcpu, vpsr); @@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu) p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); break; case PAL_BRAND_INFO: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30); break; default: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); } p->u.pal_data.gr28 = gr28; diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c index a2c6c15e4761871ffe98f5bba8b52b6b70691056..46b02cbcc8748b1ffc90fbe36865bb9c489f65a9 100644 --- a/arch/ia64/kvm/vcpu.c +++ b/arch/ia64/kvm/vcpu.c @@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val, * Now look at registers in [0-31] range and init correct UNAT */ addr = (unsigned long)regs; - unat = ®s->eml_unat;; + unat = ®s->eml_unat; addr += gr_info[regnum]; diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c index 4290a429bf7c9b48f0cd9ff049d60626e23af689..20b3852f7a6ec50d765fe3911fa0b6e6a0ef4859 100644 --- a/arch/ia64/kvm/vtlb.c +++ b/arch/ia64/kvm/vtlb.c @@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type) u64 rid; rid = vcpu_get_rr(vcpu, va); - rid = rid & RR_RID_MASK;; + rid = rid & RR_RID_MASK; if (type == D_TLB) { if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) { for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0; @@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data) struct thash_cb *hcb = &v->arch.vtlb; - cch = __vtr_lookup(v, va, is_data);; + cch = __vtr_lookup(v, va, is_data); if (cch) return cch; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 729298f4b23438dfbd299d6019d59889448e19a5..7de76dd352fe4e6350ee0a8bf6d366fe05c66f35 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res, /* * PCI BIOS setup, always defaults to SAL interface */ -char * __devinit +char * __init pcibios_setup (char *str) { return str; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 76645cf6ac5d1ded06cd4ae24eb7399ecf83075d..25831c47c579bcf3f3059c5bd914dc22e17f6c98 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address) bricktype = MODULE_GET_BTYPE(moduleid); if ((bricktype == L1_BRICKTYPE_191010) || (bricktype == L1_BRICKTYPE_1932)) - sprintf(address, "%s^%d", address, geo_slot(geoid)); + sprintf(address + strlen(address), "^%d", + geo_slot(geoid)); } void __devinit diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h index 8589d462df27e366863974619b5cf293e0b9213c..07bb5bd00e2a0660dc3be6c0c0c4514da8ade81b 100644 --- a/arch/m32r/include/asm/thread_info.h +++ b/arch/m32r/include/asm/thread_info.h @@ -57,8 +57,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -68,7 +66,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index bf0abe9e1f73e9bc9f30b1162df1577f75f51907..98b8feb12ed899e6dba32d0532b981057d4f5a6e 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h index af0fda46e94bc969978a9572221ac2843f23bae2..6ea5c33b3c564ed2d1558840f9642241fcc2e2e8 100644 --- a/arch/m68k/include/asm/thread_info_mm.h +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -19,6 +19,7 @@ struct thread_info { { \ .task = &tsk, \ .exec_domain = &default_exec_domain, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h index 82529f424ea3d567d0c1a9a2991b9591f7dacd85..c2bde5e24b0b9063d3c984e55dc168a6d9329158 100644 --- a/arch/m68k/include/asm/thread_info_no.h +++ b/arch/m68k/include/asm/thread_info_no.h @@ -49,6 +49,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 1e96c6eb631258f75946f9ab84f4ab26f1ab3890..8f8f4abab2ff16419afc8abb35fffdf4c4f63276 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -290,7 +290,7 @@ void dump(struct pt_regs *fp) unsigned char *tp; int i; - printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\nCURRENT PROCESS:\n\n"); printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid); if (current->mm) { @@ -301,8 +301,7 @@ void dump(struct pt_regs *fp) (int) current->mm->end_data, (int) current->mm->end_data, (int) current->mm->brk); - printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n" - KERN_EMERG "\n", + printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n", (int) current->mm->start_stack, (int)(((unsigned long) current) + THREAD_SIZE)); } @@ -313,35 +312,35 @@ void dump(struct pt_regs *fp) fp->d0, fp->d1, fp->d2, fp->d3); printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", fp->d4, fp->d5, fp->a0, fp->a1); - printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n", + printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n", (unsigned int) rdusp(), (unsigned int) fp); - printk(KERN_EMERG "\n" KERN_EMERG "CODE:"); + printk(KERN_EMERG "\nCODE:"); tp = ((unsigned char *) fp->pc) - 0x20; for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "KERNEL STACK:"); tp = ((unsigned char *) fp) - 0x40; for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "USER STACK:"); tp = (unsigned char *) (rdusp() - 0x10); for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); } /* diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 51d325343ab58baaa3f5abe3396dbea067ae41c2..3739c8f657d75f12d94c92e2e1665a6f927c2e7d 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i) if (i % 5) printk(KERN_CONT " [%08lx] ", addr); else - printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr); + printk(KERN_EMERG " [%08lx] ", addr); i++; #endif } @@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack) if (stack + 1 + i > endstack) break; if (i % 8 == 0) - printk("\n" KERN_EMERG " "); - printk(" %08lx", *(stack + i)); + printk(KERN_EMERG " "); + printk(KERN_CONT " %08lx", *(stack + i)); } printk("\n"); i = 0; diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index b50b845fdd506d6f6e914038794a854769301bfc..2db722d80d4d19133e8508c046c029a5c2c06cc1 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config GENERIC_GPIO def_bool y +config GENERIC_CSUM + def_bool y + config PCI def_bool n diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h index 0de612ad7cb2e5b2ca2ef8f98b4616768ab8d6c2..6d2e1d418be74f7dbc3797e82a497b8bcab93bc8 100644 --- a/arch/microblaze/include/asm/atomic.h +++ b/arch/microblaze/include/asm/atomic.h @@ -1,95 +1,7 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_ATOMIC_H #define _ASM_MICROBLAZE_ATOMIC_H -#include -#include /* likely */ -#include /* local_irq_XXX and friends */ - -#define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = (i)) - -#define atomic_inc(v) (atomic_add_return(1, (v))) -#define atomic_dec(v) (atomic_sub_return(1, (v))) - -#define atomic_add(i, v) (atomic_add_return(i, (v))) -#define atomic_sub(i, v) (atomic_sub_return(i, (v))) - -#define atomic_inc_return(v) (atomic_add_return(1, (v))) -#define atomic_dec_return(v) (atomic_sub_return(1, (v))) - -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - - c = atomic_read(v); - while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) - c = old; - return c != u; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save(flags); - *addr &= ~mask; - local_irq_restore(flags); -} - -/** - * atomic_add_return - add and return - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns @i + @v - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val += i; - local_irq_restore(flags); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - return atomic_add_return(-i, v); -} +#include /* * Atomically test *v and decrement if it is greater than 0. @@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v) return res; } -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include - #endif /* _ASM_MICROBLAZE_ATOMIC_H */ diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h index d6df1fd4e1e87522f22b494f465bdca17c0a3e5c..a72468f15c8b1cc8c696a4949e9365d0c975923e 100644 --- a/arch/microblaze/include/asm/bitops.h +++ b/arch/microblaze/include/asm/bitops.h @@ -1,27 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BITOPS_H -#define _ASM_MICROBLAZE_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include /* swab32 */ -#include /* save_flags */ - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() #include -#include - -#endif /* _ASM_MICROBLAZE_BITOPS_H */ diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h index 8eb2cdde11d7c28f417cd5f38420e51f33a36056..b12fd89e42e913ef67f0c05d95b98a21c1470c70 100644 --- a/arch/microblaze/include/asm/bug.h +++ b/arch/microblaze/include/asm/bug.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUG_H -#define _ASM_MICROBLAZE_BUG_H - -#include #include - -#endif /* _ASM_MICROBLAZE_BUG_H */ diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h index f2c6593653fb0217d0387523a0471ee2c28e3166..61791e1ad9f55cba48fafdf065e6fd05d9e95600 100644 --- a/arch/microblaze/include/asm/bugs.h +++ b/arch/microblaze/include/asm/bugs.h @@ -1,17 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUGS_H -#define _ASM_MICROBLAZE_BUGS_H - -static inline void check_bugs(void) -{ - /* nothing to do */ -} - -#endif /* _ASM_MICROBLAZE_BUGS_H */ +#include diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h index 97ea46b5cf80a2a1071b5b89dc9a85cb2e8e3f28..128bf03b54b7e9435abe99f8af19ef4eae91b611 100644 --- a/arch/microblaze/include/asm/checksum.h +++ b/arch/microblaze/include/asm/checksum.h @@ -10,12 +10,11 @@ #ifndef _ASM_MICROBLAZE_CHECKSUM_H #define _ASM_MICROBLAZE_CHECKSUM_H -#include - /* * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ +#define csum_tcpudp_nofold csum_tcpudp_nofold static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) @@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, return sum; } -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy((src), (dst), (len), (sum)) - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); +#include #endif /* _ASM_MICROBLAZE_CHECKSUM_H */ diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h new file mode 100644 index 0000000000000000000000000000000000000000..3a4988e8df456702e4ce51fc7540fc6baac50da1 --- /dev/null +++ b/arch/microblaze/include/asm/fb.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 0f2d6b013e11ead33ee6e1ca594c9a5214eccce9..41e1e1aa36aca0d3b2ee37c59e796f094c5ae7f0 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -9,21 +9,11 @@ #ifndef _ASM_MICROBLAZE_HARDIRQ_H #define _ASM_MICROBLAZE_HARDIRQ_H -#include -#include -#include -#include -#include - /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - +#define ack_bad_irq ack_bad_irq void ack_bad_irq(unsigned int irq); - -#include /* Standard mappings for irq_cpustat_t above */ +#include #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h index 03582b2492047cdd98dcdd897ef45e899fa026fc..ec34c760665eaee4e4ee74311bdf6967bbad5b68 100644 --- a/arch/microblaze/include/asm/ioctls.h +++ b/arch/microblaze/include/asm/ioctls.h @@ -1,91 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IOCTLS_H -#define _ASM_MICROBLAZE_IOCTLS_H - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -/* Get Pty Number (of pty-mux device) */ -#define TIOCGPTN _IOR('T', 0x30, unsigned int) -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_MICROBLAZE_IOCTLS_H */ +#include diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h index b056fa4206544a6d148dcf3eb8bb7fb29ed9edcf..84c7e51cb6d0befd2b3c013c8bbbbaad6ae02297 100644 --- a/arch/microblaze/include/asm/ipcbuf.h +++ b/arch/microblaze/include/asm/ipcbuf.h @@ -1,36 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IPCBUF_H -#define _ASM_MICROBLAZE_IPCBUF_H - -/* - * The user_ipc_perm structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm { - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_MICROBLAZE_IPCBUF_H */ +#include diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index db515deaa720c066c65c0bb85cce1ded59da015a..90f050535ebef0f51881fdc451bac5df84816a9d 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -10,6 +10,7 @@ #define _ASM_MICROBLAZE_IRQ_H #define NR_IRQS 32 +#include #include @@ -17,11 +18,6 @@ extern unsigned int nr_irq; #define NO_IRQ (-1) -static inline int irq_canonicalize(int irq) -{ - return irq; -} - struct pt_regs; extern void do_IRQ(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h index 4914b1329445ed1b7f3bef722b3984bd7f726533..8eebf89f5ab17884a98543f3b37a3b710355083b 100644 --- a/arch/microblaze/include/asm/mman.h +++ b/arch/microblaze/include/asm/mman.h @@ -1,25 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMAN_H -#define _ASM_MICROBLAZE_MMAN_H - #include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* _ASM_MICROBLAZE_MMAN_H */ diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h index 66cad6a99d77b41a8c5b50f140de1c3daf356121..8d6a654ceffb1b408532a27170d40909526aa157 100644 --- a/arch/microblaze/include/asm/mmu.h +++ b/arch/microblaze/include/asm/mmu.h @@ -12,12 +12,7 @@ #define _ASM_MICROBLAZE_MMU_H # ifndef CONFIG_MMU -# ifndef __ASSEMBLY__ -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; -# endif /* __ASSEMBLY__ */ +# include # else /* CONFIG_MMU */ # ifdef __KERNEL__ # ifndef __ASSEMBLY__ diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h index 385fed16bbfb12eb04281c838037c475fb72c8fa..24eab1674d3eeb53621c9f6afc7807a7f89d2c16 100644 --- a/arch/microblaze/include/asm/mmu_context.h +++ b/arch/microblaze/include/asm/mmu_context.h @@ -1,5 +1,5 @@ #ifdef CONFIG_MMU # include "mmu_context_mm.h" #else -# include "mmu_context_no.h" +# include #endif diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h deleted file mode 100644 index ba556719015481e1e25a7be4951766b82bde9d24..0000000000000000000000000000000000000000 --- a/arch/microblaze/include/asm/mmu_context_no.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H -#define _ASM_MICROBLAZE_MMU_CONTEXT_H - -# define init_new_context(tsk, mm) ({ 0; }) - -# define enter_lazy_tlb(mm, tsk) do {} while (0) -# define change_mm_context(old, ctx, _pml4) do {} while (0) -# define destroy_context(mm) do {} while (0) -# define deactivate_mm(tsk, mm) do {} while (0) -# define switch_mm(prev, next, tsk) do {} while (0) -# define activate_mm(prev, next) do {} while (0) - -#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */ diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h index 914565a90315138e2a091d5df5b642bb07df023a..7be1347fce42c0649e8e0a7d7b7941bd4f43db63 100644 --- a/arch/microblaze/include/asm/module.h +++ b/arch/microblaze/include/asm/module.h @@ -9,6 +9,8 @@ #ifndef _ASM_MICROBLAZE_MODULE_H #define _ASM_MICROBLAZE_MODULE_H +#include + /* Microblaze Relocations */ #define R_MICROBLAZE_NONE 0 #define R_MICROBLAZE_32 1 @@ -24,14 +26,6 @@ /* Keep this the last entry. */ #define R_MICROBLAZE_NUM 11 -struct mod_arch_specific { - int foo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - typedef struct { volatile int counter; } module_t; #endif /* _ASM_MICROBLAZE_MODULE_H */ diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h index 09dd97097211c5c2653716b93f27575839a7a547..809134c644a677032e9eb2ae5d5a844806bc347e 100644 --- a/arch/microblaze/include/asm/msgbuf.h +++ b/arch/microblaze/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef _ASM_MICROBLAZE_MSGBUF_H -#define _ASM_MICROBLAZE_MSGBUF_H - -/* - * The msqid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MICROBLAZE_MSGBUF_H */ +#include diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h index 8c538a49616d818fce6eab212ed147a743e29468..965d45427975907ae67efb45e20c8f500fd1ad3a 100644 --- a/arch/microblaze/include/asm/param.h +++ b/arch/microblaze/include/asm/param.h @@ -1,30 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_PARAM_H -#define _ASM_MICROBLAZE_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_MICROBLAZE_PARAM_H */ +#include diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h new file mode 100644 index 0000000000000000000000000000000000000000..cf252af6459087e0d01e92362bc7e2d5170e4c94 --- /dev/null +++ b/arch/microblaze/include/asm/parport.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index ca03794cf3f0e748e3ee6690e84f9b958139bf61..9f0df5faf2c88d1d89b37ba56c7b535e0e29f4ba 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -1 +1 @@ -#include +#include diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h index 8c758b231f376780dad5b30a0ae8b8b29da54b00..0e15039673e34f46df971fcb21444321345ac0de 100644 --- a/arch/microblaze/include/asm/posix_types.h +++ b/arch/microblaze/include/asm/posix_types.h @@ -1,73 +1,9 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H #define _ASM_MICROBLAZE_POSIX_TYPES_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char *__kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; -typedef unsigned int __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +#define __kernel_mode_t __kernel_mode_t -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#include #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */ diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 08ff1d049b4264a4d191abb970c0391fbb5cfc24..35d786fe93ae0dcba7e1cf434606e9e61d1b05c2 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1,28 +1 @@ -/* - * Copyright (C) 2008 Michal Simek - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SCATTERLIST_H -#define _ASM_MICROBLAZE_SCATTERLIST_H - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - dma_addr_t dma_address; - unsigned int offset; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (~0UL) - -#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */ +#include diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h index b804ed71a57e51d5eb186f3c1f196c17e5057546..7673b83cfef73397301a171e86cf492b771ad9b4 100644 --- a/arch/microblaze/include/asm/sembuf.h +++ b/arch/microblaze/include/asm/sembuf.h @@ -1,34 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEMBUF_H -#define _ASM_MICROBLAZE_SEMBUF_H - -/* - * The semid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - - -#endif /* _ASM_MICROBLAZE_SEMBUF_H */ +#include diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h index 39bfc8ce6af58348b1ede012394fda0802296bf6..a0cb0caff15241a41973f67b68756510b8bfe90e 100644 --- a/arch/microblaze/include/asm/serial.h +++ b/arch/microblaze/include/asm/serial.h @@ -1,14 +1 @@ -/* - * Copyright (C) 2009 Michal Simek - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SERIAL_H -#define _ASM_MICROBLAZE_SERIAL_H - -# define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_MICROBLAZE_SERIAL_H */ +#include diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h index f829c584361858e93ceb0468e30d3a7e3cdc398e..83c05fc2de385c3260286bf12fed846617c8c095 100644 --- a/arch/microblaze/include/asm/shmbuf.h +++ b/arch/microblaze/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMBUF_H -#define _ASM_MICROBLAZE_SHMBUF_H - -/* - * The shmid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_MICROBLAZE_SHMBUF_H */ +#include diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h index 9f5fc2b3b6a3cbf6b7eb7aa83fc23a1eb75005c1..93f30deb95d0803ee9b84ade84d3c6738894603a 100644 --- a/arch/microblaze/include/asm/shmparam.h +++ b/arch/microblaze/include/asm/shmparam.h @@ -1,6 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMPARAM_H -#define _ASM_MICROBLAZE_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_MICROBLAZE_SHMPARAM_H */ +#include diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h index f162911a8f50cfebff36d7d07ee4223e4a1e6f68..0815d29d82e5f5f14d6e570f8768d184d63912a9 100644 --- a/arch/microblaze/include/asm/siginfo.h +++ b/arch/microblaze/include/asm/siginfo.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGINFO_H -#define _ASM_MICROBLAZE_SIGINFO_H - -#include #include - -#endif /* _ASM_MICROBLAZE_SIGINFO_H */ diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h index 46bc2267d9497a751de01b75324120b384f4ce5f..7b1573ce19de50ed695751b2af1bd8dfc54b86e8 100644 --- a/arch/microblaze/include/asm/signal.h +++ b/arch/microblaze/include/asm/signal.h @@ -1,165 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * Yasushi SHOJI - * Tetsuya OHKAWA - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGNAL_H -#define _ASM_MICROBLAZE_SIGNAL_H - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -# ifndef __ASSEMBLY__ -# include -# include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -# ifdef __KERNEL__ -/* - * Most things should be clean enough to redefine this at will, if care - * is taken to make libc match. - */ -# define _NSIG 64 -# define _NSIG_BPW 32 -# define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -# include -# undef __HAVE_ARCH_SIG_BITOPS - -# define ptrace_signal_deliver(regs, cookie) do { } while (0) - -# else /* !__KERNEL__ */ - -/* Here we must cater to libcs that poke about in kernel headers. */ - -# define NSIG 32 -typedef unsigned long sigset_t; - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -# define sa_handler _u._sa_handler -# define sa_sigaction _u._sa_sigaction - -# endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SIGNAL_H */ +#include diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h index 8259368603149ea09320b079b1d41bebfb385211..6b71384b9d8b42ac6cce8a955a73220bda4957d5 100644 --- a/arch/microblaze/include/asm/socket.h +++ b/arch/microblaze/include/asm/socket.h @@ -1,69 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKET_H -#define _ASM_MICROBLAZE_SOCKET_H - -#include - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 - -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_MICROBLAZE_SOCKET_H */ +#include diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h index 9fff57a701e1e0a35d0c165c7e83bc6e624b202f..def6d4746ee7fef64057f79e8d76ac41688671d9 100644 --- a/arch/microblaze/include/asm/sockios.h +++ b/arch/microblaze/include/asm/sockios.h @@ -1,23 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKIOS_H -#define _ASM_MICROBLAZE_SOCKIOS_H - -#include - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_MICROBLAZE_SOCKIOS_H */ +#include diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h index a15f77520bfd74ac2dff80e4780d37c7b3574ed9..3dc90fa92c704d8fb07d66b034daadd44ee6376b 100644 --- a/arch/microblaze/include/asm/stat.h +++ b/arch/microblaze/include/asm/stat.h @@ -1,68 +1 @@ -/* - * Microblaze stat structure - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader - */ - -#ifndef _ASM_MICROBLAZE_STAT_H -#define _ASM_MICROBLAZE_STAT_H - -#include - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - unsigned long __pad1; - long st_size; - int st_blksize; - int __pad2; - long st_blocks; - int st_atime; - unsigned int st_atime_nsec; - int st_mtime; - unsigned int st_mtime_nsec; - int st_ctime; - unsigned int st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned long long __pad1; - long long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - int __pad2; - long long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - unsigned int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - unsigned int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - unsigned int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif /* _ASM_MICROBLAZE_STAT_H */ - +#include diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h index b375d7b65ad73b7b7578da5dfc71ba71115f59a5..7847e563ab66f18af1951d9cf94bf353daf54596 100644 --- a/arch/microblaze/include/asm/swab.h +++ b/arch/microblaze/include/asm/swab.h @@ -1,8 +1 @@ -#ifndef _ASM_MICROBLAZE_SWAB_H -#define _ASM_MICROBLAZE_SWAB_H - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -#define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_MICROBLAZE_SWAB_H */ +#include diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h index ddea9eb31f8da76aa4a3a820a7ee8a9c0744dae7..720761cc741f43209e8081afd8dde3d5fb028a40 100644 --- a/arch/microblaze/include/asm/syscalls.h +++ b/arch/microblaze/include/asm/syscalls.h @@ -1,48 +1,8 @@ #ifndef __ASM_MICROBLAZE_SYSCALLS_H -#define __ASM_MICROBLAZE_SYSCALLS_H -#ifdef __KERNEL__ -#include -#include -#include -#include +asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs); +#define sys_clone sys_clone -/* FIXME will be removed */ -asmlinkage int sys_ipc(uint call, int first, int second, - int third, void *ptr, long fifth); +#include -struct pt_regs; -asmlinkage int sys_vfork(struct pt_regs *regs); -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs); -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, - char __user *__user *envp, struct pt_regs *regs); - -asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); - -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); - -/* from signal.c */ -asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs); - -asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs); - -asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact); - -asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, size_t sigsetsize); - -asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs); - -asmlinkage int sys_sigreturn(struct pt_regs *regs); - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs); - -#endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_SYSCALLS_H */ diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index c4e308850b5d6af1be1e1c0fd8487fd307e8ba22..b1ed6159066006bd3d635f57126316a12f25962a 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -13,6 +13,9 @@ #include #include +#include +#include + struct task_struct; struct thread_info; diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h index a1b64bc4724ac0344b4f0d6b259719f808f2c643..3935b106de79bf2f8469b849576268ac1ca30bb2 100644 --- a/arch/microblaze/include/asm/termbits.h +++ b/arch/microblaze/include/asm/termbits.h @@ -1,203 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMBITS_H -#define _ASM_MICROBLAZE_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define BOTHER 0010000 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_MICROBLAZE_TERMBITS_H */ +#include diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h index 47a46d1fbe26fa4e1ddd1bf7b66f3290ea1facc8..280d78a9d96637ccbc93bc4c0debc88eb9443bba 100644 --- a/arch/microblaze/include/asm/termios.h +++ b/arch/microblaze/include/asm/termios.h @@ -1,88 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMIOS_H -#define _ASM_MICROBLAZE_TERMIOS_H - -#include -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -/* Line disciplines */ - -#define N_TTY 0 -#define N_SLIP 1 -#define N_MOUSE 2 -#define N_PPP 3 -#define N_STRIP 4 -#define N_AX25 5 -#define N_X25 6 /* X.25 async */ -#define N_6PACK 7 -#define N_MASC 8 /* Reserved for Mobitex module */ -#define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ -#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ -#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards - about SMS messages */ -#define N_HDLC 13 /* synchronous HDLC */ -#define N_SYNC_PPP 14 -#define N_HCI 15 /* Bluetooth HCI UART */ - -#ifdef __KERNEL__ - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_TERMIOS_H */ +#include diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 7fac44498445f82595431e75c28fcf61a6731e21..6e92885d381a80ee3adc680632415c3911ecdb64 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -75,8 +75,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ @@ -84,7 +82,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h index 678525dc6d0b1ee8e9f7a67b6c6951b676cde889..befcf3de5532c2df283b45a55816d4037a6f2759 100644 --- a/arch/microblaze/include/asm/timex.h +++ b/arch/microblaze/include/asm/timex.h @@ -9,10 +9,8 @@ #ifndef _ASM_MICROBLAZE_TIMEX_H #define _ASM_MICROBLAZE_TIMEX_H -#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ - -typedef unsigned long cycles_t; +#include -#define get_cycles() (0) +#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h index bebc018318f5527a33d6f7b3d409bbf24cf5c322..b9e79bc580dd6cf47ae1c6a939eb8c67e6f5f7e5 100644 --- a/arch/microblaze/include/asm/types.h +++ b/arch/microblaze/include/asm/types.h @@ -1,38 +1 @@ -/* - * Copyright (C) Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TYPES_H -#define _ASM_MICROBLAZE_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ - -#include - -# ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -# ifdef __KERNEL__ -# define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -# endif/* __KERNEL__ */ -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_TYPES_H */ +#include diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h index 11f6bb3ae3a4efd27d978a80dcb76651d0a6d20f..9bc07b9f30fba10518b48cadc01d9aa4eaa4260f 100644 --- a/arch/microblaze/include/asm/ucontext.h +++ b/arch/microblaze/include/asm/ucontext.h @@ -1,22 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_UCONTEXT_H -#define _ASM_MICROBLAZE_UCONTEXT_H - -#include - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_MICROBLAZE_UCONTEXT_H */ +#include diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index b5e2f5fa5c53559adaf1cd1dd593b4c57aa34404..0b852327c0e7bcaf73d45daa15d5f047533f7485 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -380,8 +380,10 @@ #define __NR_accept04 362 /* new */ #define __NR_preadv 363 /* new */ #define __NR_pwritev 364 /* new */ +#define __NR_rt_tgsigqueueinfo 365 /* new */ +#define __NR_perf_counter_open 366 /* new */ -#define __NR_syscalls 365 +#define __NR_syscalls 367 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -408,7 +410,7 @@ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION -/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */ +#define __ARCH_WANT_SYS_RT_SIGSUSPEND /* * "Conditional" syscalls diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h index 8b137891791fe96927ad78e64b0aad7bded08bdc..89d82fd8fcf17bcea5c5d0644d4ceda64883bde8 100644 --- a/arch/microblaze/include/asm/vga.h +++ b/arch/microblaze/include/asm/vga.h @@ -1 +1 @@ - +#include diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 1fce6b803f54905b69ffadca0162a4db0593ed66..9083d85376a4dc57b6e7c535869eb4b3f11570f5 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -551,30 +551,22 @@ no_work_pending: rtid r14, 0 nop -sys_vfork_wrapper: - brid sys_vfork +sys_vfork: + brid microblaze_vfork addk r5, r1, r0 -sys_clone_wrapper: - brid sys_clone +sys_clone: + brid microblaze_clone addk r7, r1, r0 -sys_execve_wrapper: - brid sys_execve +sys_execve: + brid microblaze_execve addk r8, r1, r0 -sys_sigreturn_wrapper: - brid sys_sigreturn - addk r5, r1, r0 - sys_rt_sigreturn_wrapper: brid sys_rt_sigreturn addk r5, r1, r0 -sys_sigsuspend_wrapper: - brid sys_rt_sigsuspend - addk r6, r1, r0 - sys_rt_sigsuspend_wrapper: brid sys_rt_sigsuspend addk r7, r1, r0 diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 91a0e7b185dd998c0b51981adc43e81ced768361..c7353e79f4a22f2ddb70d7b25d5e8c79783d8f0e 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork): brid ret_from_trap; /* Do normal trap return */ nop; -C_ENTRY(sys_vfork_wrapper): +C_ENTRY(sys_vfork): + brid microblaze_vfork /* Do real work (tail-call) */ la r5, r1, PTO - brid sys_vfork /* Do real work (tail-call) */ - nop -C_ENTRY(sys_clone_wrapper): +C_ENTRY(sys_clone): bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */ 1: la r7, r1, PTO; /* Arg 2: parent context */ @@ -444,20 +443,9 @@ C_ENTRY(sys_clone_wrapper): brid do_fork /* Do real work (tail-call) */ nop; -C_ENTRY(sys_execve_wrapper): +C_ENTRY(sys_execve): la r8, r1, PTO; /* add user context as 4th arg */ - brid sys_execve; /* Do real work (tail-call).*/ - nop; - -C_ENTRY(sys_sigsuspend_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r6, r1, PTO; /* add user context as 2nd arg */ - bralid r15, sys_sigsuspend; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ + brid microblaze_execve; /* Do real work (tail-call).*/ nop; C_ENTRY(sys_rt_sigsuspend_wrapper): @@ -471,18 +459,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper): bri ret_from_trap /* fall through will not work here due to align */ nop; - -C_ENTRY(sys_sigreturn_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r5, r1, PTO; /* add user context as 1st arg */ - brlid r15, sys_sigreturn; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ - nop; - C_ENTRY(sys_rt_sigreturn_wrapper): swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ swi r4, r1, PTO+PT_R4; diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index b86aa623e36d053f95c61de5533782c0d92a8bb2..53ff39af6a5c0eebfcf156dd02969d231896229d 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 4c0e6521b1140e6d92183fb165b03076253a889d..1c80e4fc40cef1fc0513951c449452ff23139c96 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -45,91 +44,8 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int -sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs) -{ - sigset_t saveset; - - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} - -asmlinkage int +asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) { @@ -139,7 +55,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, /* * Do a signal return; undo the signal stack. */ - struct sigframe { struct sigcontext sc; unsigned long extramask[_NSIG_WORDS-1]; @@ -176,40 +91,7 @@ static int restore_sigcontext(struct pt_regs *regs, return err; } -asmlinkage int sys_sigreturn(struct pt_regs *regs) -{ - struct sigframe *frame = - (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); - - sigset_t set; - int rval; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &rval)) - goto badframe; - return rval; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE); @@ -324,21 +206,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up to return from userspace. If provided, use a stub already in userspace. */ /* minus 8 is offset to cater for "rtsd r15,8" */ - if (ka->sa.sa_flags & SA_RESTORER) { - regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8; - } else { - /* addi r12, r0, __NR_sigreturn */ - err |= __put_user(0x31800000 | __NR_rt_sigreturn , - frame->tramp + 0); - /* brki r14, 0x8 */ - err |= __put_user(0xb9cc0008, frame->tramp + 1); - - /* Return from sighandler will jump to the tramp. - Negative 8 offset because return is rtsd r15, 8 */ - regs->r15 = ((unsigned long)frame->tramp)-8; - - __invalidate_cache_sigtramp((unsigned long)frame->tramp); - } + /* addi r12, r0, __NR_sigreturn */ + err |= __put_user(0x31800000 | __NR_rt_sigreturn , + frame->tramp + 0); + /* brki r14, 0x8 */ + err |= __put_user(0xb9cc0008, frame->tramp + 1); + + /* Return from sighandler will jump to the tramp. + Negative 8 offset because return is rtsd r15, 8 */ + regs->r15 = ((unsigned long)frame->tramp)-8; + + __invalidate_cache_sigtramp((unsigned long)frame->tramp); if (err) goto give_sigsegv; @@ -405,7 +283,7 @@ do_restart: * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { @@ -426,6 +304,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } + return 1; } /* @@ -456,7 +335,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) if (kernel_mode(regs)) return 1; - if (!oldset) + if (current_thread_info()->status & TS_RESTORE_SIGMASK) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -464,13 +345,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) /* Whee! Actually deliver the signal. */ if (in_syscall) handle_restart(regs, &ka, 1); - handle_signal(signr, &ka, &info, oldset, regs); + if (handle_signal(signr, &ka, &info, oldset, regs)) { + /* + * A signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TS_RESTORE_SIGMASK flag. + */ + current_thread_info()->status &= + ~TS_RESTORE_SIGMASK; + } return 1; } if (in_syscall) handle_restart(regs, NULL, 0); + /* + * If there's no signal to deliver, we just put the saved sigmask + * back. + */ + if (current_thread_info()->status & TS_RESTORE_SIGMASK) { + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + /* Did we come from a system call? */ return 0; } diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 31905ff590b704db07206f1d11d7acc84386d9ea..e000bce09b2bda6e41066e1ad77af992366a87be 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -39,7 +38,7 @@ * * This is really horribly ugly. This will be remove with new toolchain. */ -asmlinkage int +asmlinkage long sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) { int version, ret; @@ -134,20 +133,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) return ret; } -asmlinkage int sys_vfork(struct pt_regs *regs) +asmlinkage long microblaze_vfork(struct pt_regs *regs) { return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, regs, 0, NULL, NULL); } -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs) +asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs) { if (!stack) stack = regs->r1; return do_fork(flags, stack, regs, 0, NULL, NULL); } -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, +asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv, char __user *__user *envp, struct pt_regs *regs) { int error; @@ -163,8 +162,8 @@ out: return error; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, size_t len, +asmlinkage long +sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { @@ -189,18 +188,18 @@ out: return ret; } -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset) + unsigned long fd, off_t pgoff) { int err = -EINVAL; - if (offset & ~PAGE_MASK) { + if (pgoff & ~PAGE_MASK) { printk(KERN_INFO "no pagemask in mmap\r\n"); goto out; } - err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); out: return err; } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 376d1789f7c065e436fdf39d7b3e2f8f2318494f..31b32a6c5f4ee06a39c3defa757c27a8f13c5b5d 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -15,7 +15,7 @@ ENTRY(sys_call_table) .long sys_creat .long sys_link .long sys_unlink /* 10 */ - .long sys_execve_wrapper + .long sys_execve .long sys_chdir .long sys_time .long sys_mknod @@ -71,12 +71,12 @@ ENTRY(sys_call_table) .long sys_getppid .long sys_getpgrp /* 65 */ .long sys_setsid - .long sys_sigaction + .long sys_ni_syscall /* sys_sigaction */ .long sys_sgetmask .long sys_ssetmask .long sys_setreuid /* 70 */ .long sys_setregid - .long sys_sigsuspend_wrapper + .long sys_ni_syscall /* sys_sigsuspend_wrapper */ .long sys_sigpending .long sys_sethostname .long sys_setrlimit /* 75 */ @@ -123,8 +123,8 @@ ENTRY(sys_call_table) .long sys_sysinfo .long sys_ipc .long sys_fsync - .long sys_sigreturn_wrapper - .long sys_clone_wrapper /* 120 */ + .long sys_ni_syscall /* sys_sigreturn_wrapper */ + .long sys_clone /* 120 */ .long sys_setdomainname .long sys_newuname .long sys_ni_syscall /* modify_ldt */ @@ -194,7 +194,7 @@ ENTRY(sys_call_table) .long sys_sendfile .long sys_ni_syscall /* reserved for streams1 */ .long sys_ni_syscall /* reserved for streams2 */ - .long sys_vfork_wrapper /* 190 */ + .long sys_vfork /* 190 */ .long sys_getrlimit .long sys_mmap2 /* mmap2 */ .long sys_truncate64 @@ -369,3 +369,5 @@ ENTRY(sys_call_table) .long sys_ni_syscall .long sys_ni_syscall .long sys_ni_syscall + .long sys_rt_tgsigqueueinfo /* 365 */ + .long sys_perf_counter_open diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 71c8cb6c9e43767a4ebd43f9e4c54d3e9820928b..b579db068c06fd3346a1458879145ef8f50063b3 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -2,7 +2,7 @@ # Makefile # -lib-y := memset.o checksum.o +lib-y := memset.o ifeq ($(CONFIG_OPT_LIB_ASM),y) lib-y += fastcopy.o diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c deleted file mode 100644 index f08e74591418dc4d15563620eaff7bddbc0de95c..0000000000000000000000000000000000000000 --- a/arch/microblaze/lib/checksum.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, - * Arnt Gulbrandsen, - * Tom May, - * Andreas Schwab, - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc - * choose these registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access - kills, so most of the assembly has to go. */ - -#include -#include - -#include - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned int do_csum(const unsigned char *buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph, ihl*4); -} -EXPORT_SYMBOL(ip_fast_csum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum wsum) -{ - unsigned int sum = (__force unsigned int)wsum; - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += sum; - if (sum > result) - result += 1; - return (__force __wsum)result; -} -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *csum_err) -{ - int missing; - - missing = __copy_from_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *csum_err = -EFAULT; - } else - *csum_err = 0; - - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index b5a701cd71e08d86ceec067f011c98b4abe0f419..8d92c4efe9a4c8aa86ab5c123913524cfc2947a8 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -80,15 +80,15 @@ void __init setup_memory(void) memory_size = memory_end - memory_start; PAGE_OFFSET = memory_start; printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, " - "size 0x%08x\n", __func__, memory_start, - memory_end, memory_size); + "size 0x%08x\n", __func__, (u32) memory_start, + (u32) memory_end, (u32) memory_size); break; } } if (!memory_start || !memory_end) { panic("%s: Missing memory setting 0x%08x-0x%08x\n", - __func__, memory_start, memory_end); + __func__, (u32) memory_start, (u32) memory_end); } /* reservation of region where is the kernel */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8c4be1f301cf2f9b1310eae61502ebd33b5391f1..3ca0fe1a91231441d9767fdcd56a9caafe203c83 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -22,6 +22,26 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" +config AR7 + bool "Texas Instruments AR7" + select BOOT_ELF32 + select DMA_NONCOHERENT + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select NO_EXCEPT_FILL + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_GPIO + select GCD + select VLYNQ + help + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + config BASLER_EXCITE bool "Basler eXcite smart camera" select CEVT_R4K @@ -209,7 +229,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken + select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help @@ -247,6 +267,7 @@ config MACH_VR41XX select CEVT_R4K select CSRC_R4K select SYS_HAS_CPU_VR41XX + select ARCH_REQUIRE_GPIOLIB config NXP_STB220 bool "NXP STB220 board" @@ -1635,7 +1656,7 @@ config MIPS_APSP_KSPD config MIPS_CMP bool "MIPS CMP framework support" depends on SYS_SUPPORTS_MIPS_CMP - select SYNC_R4K if BROKEN + select SYNC_R4K select SYS_SUPPORTS_SMP select SYS_SUPPORTS_SCHED_SMT if SMP select WEAK_ORDERING @@ -2147,11 +2168,11 @@ menu "Power management options" config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP config ARCH_SUSPEND_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP source "kernel/power/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 807572a6a4d2df80335ee2334518c9ae5726841f..861da514a468a7cf84bdb0d32cd703921f7853e0 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -172,6 +172,13 @@ libs-y += arch/mips/fw/lib/ # Board-dependent options and extra files # +# +# Texas Instruments AR7 +# +core-$(CONFIG_AR7) += arch/mips/ar7/ +cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 +load-$(CONFIG_AR7) += 0xffffffff94100000 + # # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..7435e44b396404b355fe60dc1bf7e9de96e33665 --- /dev/null +++ b/arch/mips/ar7/Makefile @@ -0,0 +1,10 @@ + +obj-y := \ + prom.o \ + setup.o \ + memory.o \ + irq.o \ + time.o \ + platform.o \ + gpio.o \ + clock.o diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c new file mode 100644 index 0000000000000000000000000000000000000000..27dc6663f2fa586bbe232e9047e8500d08a2e265 --- /dev/null +++ b/arch/mips/ar7/clock.c @@ -0,0 +1,440 @@ +/* + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define BOOT_PLL_SOURCE_MASK 0x3 +#define CPU_PLL_SOURCE_SHIFT 16 +#define BUS_PLL_SOURCE_SHIFT 14 +#define USB_PLL_SOURCE_SHIFT 18 +#define DSP_PLL_SOURCE_SHIFT 22 +#define BOOT_PLL_SOURCE_AFE 0 +#define BOOT_PLL_SOURCE_BUS 0 +#define BOOT_PLL_SOURCE_REF 1 +#define BOOT_PLL_SOURCE_XTAL 2 +#define BOOT_PLL_SOURCE_CPU 3 +#define BOOT_PLL_BYPASS 0x00000020 +#define BOOT_PLL_ASYNC_MODE 0x02000000 +#define BOOT_PLL_2TO1_MODE 0x00008000 + +#define TNETD7200_CLOCK_ID_CPU 0 +#define TNETD7200_CLOCK_ID_DSP 1 +#define TNETD7200_CLOCK_ID_USB 2 + +#define TNETD7200_DEF_CPU_CLK 211000000 +#define TNETD7200_DEF_DSP_CLK 125000000 +#define TNETD7200_DEF_USB_CLK 48000000 + +struct tnetd7300_clock { + u32 ctrl; +#define PREDIV_MASK 0x001f0000 +#define PREDIV_SHIFT 16 +#define POSTDIV_MASK 0x0000001f + u32 unused1[3]; + u32 pll; +#define MUL_MASK 0x0000f000 +#define MUL_SHIFT 12 +#define PLL_MODE_MASK 0x00000001 +#define PLL_NDIV 0x00000800 +#define PLL_DIV 0x00000002 +#define PLL_STATUS 0x00000001 + u32 unused2[3]; +}; + +struct tnetd7300_clocks { + struct tnetd7300_clock bus; + struct tnetd7300_clock cpu; + struct tnetd7300_clock usb; + struct tnetd7300_clock dsp; +}; + +struct tnetd7200_clock { + u32 ctrl; + u32 unused1[3]; +#define DIVISOR_ENABLE_MASK 0x00008000 + u32 mul; + u32 prediv; + u32 postdiv; + u32 postdiv2; + u32 unused2[6]; + u32 cmd; + u32 status; + u32 cmden; + u32 padding[15]; +}; + +struct tnetd7200_clocks { + struct tnetd7200_clock cpu; + struct tnetd7200_clock dsp; + struct tnetd7200_clock usb; +}; + +int ar7_cpu_clock = 150000000; +EXPORT_SYMBOL(ar7_cpu_clock); +int ar7_bus_clock = 125000000; +EXPORT_SYMBOL(ar7_bus_clock); +int ar7_dsp_clock; +EXPORT_SYMBOL(ar7_dsp_clock); + +static void approximate(int base, int target, int *prediv, + int *postdiv, int *mul) +{ + int i, j, k, freq, res = target; + for (i = 1; i <= 16; i++) + for (j = 1; j <= 32; j++) + for (k = 1; k <= 32; k++) { + freq = abs(base / j * i / k - target); + if (freq < res) { + res = freq; + *mul = i; + *prediv = j; + *postdiv = k; + } + } +} + +static void calculate(int base, int target, int *prediv, int *postdiv, + int *mul) +{ + int tmp_gcd, tmp_base, tmp_freq; + + for (*prediv = 1; *prediv <= 32; (*prediv)++) { + tmp_base = base / *prediv; + tmp_gcd = gcd(target, tmp_base); + *mul = target / tmp_gcd; + *postdiv = tmp_base / tmp_gcd; + if ((*mul < 1) || (*mul >= 16)) + continue; + if ((*postdiv > 0) & (*postdiv <= 32)) + break; + } + + if (base / *prediv * *mul / *postdiv != target) { + approximate(base, target, prediv, postdiv, mul); + tmp_freq = base / *prediv * *mul / *postdiv; + printk(KERN_WARNING + "Adjusted requested frequency %d to %d\n", + target, tmp_freq); + } + + printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", + *prediv, *postdiv, *mul); +} + +static int tnetd7300_dsp_clock(void) +{ + u32 didr1, didr2; + u8 rev = ar7_chip_rev(); + didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); + didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); + if (didr2 & (1 << 23)) + return 0; + if ((rev >= 0x23) && (rev != 0x57)) + return 250000000; + if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) + > 4208000) + return 250000000; + return 0; +} + +static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int product; + int base_clock = AR7_REF_CLOCK; + u32 ctrl = readl(&clock->ctrl); + u32 pll = readl(&clock->pll); + int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; + int postdiv = (ctrl & POSTDIV_MASK) + 1; + int divisor = prediv * postdiv; + int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + if (*bootcr & BOOT_PLL_BYPASS) + return base_clock / divisor; + + if ((pll & PLL_MODE_MASK) == 0) + return (base_clock >> (mul / 16 + 1)) / divisor; + + if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { + product = (mul & 1) ? + (base_clock * mul) >> 1 : + (base_clock * (mul - 1)) >> 2; + return product / divisor; + } + + if (mul == 16) + return base_clock / divisor; + + return base_clock * mul / divisor; +} + +static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 frequency) +{ + int prediv, postdiv, mul; + int base_clock = ar7_bus_clock; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = ar7_bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + calculate(base_clock, frequency, &prediv, &postdiv, &mul); + + writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); + msleep(1); + writel(4, &clock->pll); + while (readl(&clock->pll) & PLL_STATUS) + ; + writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); + msleep(75); +} + +static void __init tnetd7300_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7300_clocks *clocks = + ioremap_nocache(UR8_REGS_CLOCKS, + sizeof(struct tnetd7300_clocks)); + + ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, + &clocks->bus, bootcr, AR7_AFE_CLOCK); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) + ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, + &clocks->cpu, bootcr, AR7_AFE_CLOCK); + else + ar7_cpu_clock = ar7_bus_clock; + + if (ar7_dsp_clock == 250000000) + tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, + bootcr, ar7_dsp_clock); + + iounmap(clocks); + iounmap(bootcr); +} + +static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int divisor = ((readl(&clock->prediv) & 0x1f) + 1) * + ((readl(&clock->postdiv) & 0x1f) + 1); + + if (*bootcr & BOOT_PLL_BYPASS) + return base / divisor; + + return base * ((readl(&clock->mul) & 0xf) + 1) / divisor; +} + + +static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, + int prediv, int postdiv, int postdiv2, int mul, u32 frequency) +{ + printk(KERN_INFO + "Clocks: base = %d, frequency = %u, prediv = %d, " + "postdiv = %d, postdiv2 = %d, mul = %d\n", + base, frequency, prediv, postdiv, postdiv2, mul); + + writel(0, &clock->ctrl); + writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv); + writel((mul - 1) & 0xF, &clock->mul); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(readl(&clock->ctrl) | 1, &clock->ctrl); +} + +static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) +{ + if (*bootcr & BOOT_PLL_ASYNC_MODE) + /* Async */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* Sync */ + if (*bootcr & BOOT_PLL_2TO1_MODE) + /* 2:1 */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* 1:1 */ + return AR7_REF_CLOCK; +} + + +static void __init tnetd7200_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7200_clocks *clocks = + ioremap_nocache(AR7_REGS_CLOCKS, + sizeof(struct tnetd7200_clocks)); + int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; + int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; + int usb_base, usb_mul, usb_prediv, usb_postdiv; + + cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); + dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + printk(KERN_INFO "Clocks: Async mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, + &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = + ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = + ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + } else + if (*bootcr & BOOT_PLL_2TO1_MODE) { + printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) + / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ar7_cpu_clock / 2; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + } else { + printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) + / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + + ar7_cpu_clock = ar7_bus_clock; + } + + printk(KERN_INFO "Clocks: Setting USB clock\n"); + usb_base = ar7_bus_clock; + calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, + &usb_postdiv, &usb_mul); + tnetd7200_set_clock(usb_base, &clocks->usb, + usb_prediv, usb_postdiv, -1, usb_mul, + TNETD7200_DEF_USB_CLK); + + ar7_dsp_clock = ar7_cpu_clock; + + iounmap(clocks); + iounmap(bootcr); +} + +int __init ar7_init_clocks(void) +{ + switch (ar7_chip_id()) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + tnetd7200_init_clocks(); + break; + case AR7_CHIP_7300: + ar7_dsp_clock = tnetd7300_dsp_clock(); + tnetd7300_init_clocks(); + break; + default: + break; + } + + return 0; +} +arch_initcall(ar7_init_clocks); diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..74e14a3dbf4aad05ab5ac6acdc1c0f55438919af --- /dev/null +++ b/arch/mips/ar7/gpio.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#include + +static const char *ar7_gpio_list[AR7_GPIO_MAX]; + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + if (ar7_gpio_list[gpio]) + return -EBUSY; + + if (label) + ar7_gpio_list[gpio] = label; + else + ar7_gpio_list[gpio] = "busy"; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + BUG_ON(!ar7_gpio_list[gpio]); + ar7_gpio_list[gpio] = NULL; +} +EXPORT_SYMBOL(gpio_free); diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c new file mode 100644 index 0000000000000000000000000000000000000000..c781556c44e46cea3c51a84d149e1b3d68f6c8b8 --- /dev/null +++ b/arch/mips/ar7/irq.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau + * Copyright (C) 2006,2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#include +#include +#include + +#define EXCEPT_OFFSET 0x80 +#define PACE_OFFSET 0xA0 +#define CHNLS_OFFSET 0x200 + +#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) +#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) +#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ +#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ +#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ +#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ +#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ +#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ +#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ +#define PIR_OFFSET (0x40) +#define MSR_OFFSET (0x44) +#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ +#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ + +#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) + +#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) + +static int ar7_irq_base; + +static void ar7_unmask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ESR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_mask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ECR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_ack_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(CR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_unmask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET)); +} + +static void ar7_mask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET)); +} + +static void ar7_ack_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET)); +} + +static struct irq_chip ar7_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_irq, + .mask = ar7_mask_irq, + .ack = ar7_ack_irq +}; + +static struct irq_chip ar7_sec_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_sec_irq, + .mask = ar7_mask_sec_irq, + .ack = ar7_ack_sec_irq, +}; + +static struct irqaction ar7_cascade_action = { + .handler = no_action, + .name = "AR7 cascade interrupt" +}; + +static void __init ar7_irq_init(int base) +{ + int i; + /* + * Disable interrupts and clear pending + */ + writel(0xffffffff, REG(ECR_OFFSET(0))); + writel(0xff, REG(ECR_OFFSET(32))); + writel(0xffffffff, REG(SEC_ECR_OFFSET)); + writel(0xffffffff, REG(CR_OFFSET(0))); + writel(0xff, REG(CR_OFFSET(32))); + writel(0xffffffff, REG(SEC_CR_OFFSET)); + + ar7_irq_base = base; + + for (i = 0; i < 40; i++) { + writel(i, REG(CHNL_OFFSET(i))); + /* Primary IRQ's */ + set_irq_chip_and_handler(base + i, &ar7_irq_type, + handle_level_irq); + /* Secondary IRQ's */ + if (i < 32) + set_irq_chip_and_handler(base + i + 40, + &ar7_sec_irq_type, + handle_level_irq); + } + + setup_irq(2, &ar7_cascade_action); + setup_irq(ar7_irq_base, &ar7_cascade_action); + set_c0_status(IE_IRQ0); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ar7_irq_init(8); +} + +static void ar7_cascade(void) +{ + u32 status; + int i, irq; + + /* Primary IRQ's */ + irq = readl(REG(PIR_OFFSET)) & 0x3f; + if (irq) { + do_IRQ(ar7_irq_base + irq); + return; + } + + /* Secondary IRQ's are cascaded through primary '0' */ + writel(1, REG(CR_OFFSET(irq))); + status = readl(REG(SEC_SR_OFFSET)); + for (i = 0; i < 32; i++) { + if (status & 1) { + do_IRQ(ar7_irq_base + i + 40); + return; + } + status >>= 1; + } + + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + ar7_cascade(); + else + spurious_interrupt(); +} diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c new file mode 100644 index 0000000000000000000000000000000000000000..46fed44825a6eb00719c05fb8a2eadec482a2842 --- /dev/null +++ b/arch/mips/ar7/memory.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +static int __init memsize(void) +{ + u32 size = (64 << 20); + u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4); + u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); + u32 *tmpaddr = addr; + + while (tmpaddr > kernel_end) { + *tmpaddr = (u32)tmpaddr; + size >>= 1; + tmpaddr -= size >> 2; + } + + do { + tmpaddr += size >> 2; + if (*tmpaddr != (u32)tmpaddr) + break; + size <<= 1; + } while (size < (64 << 20)); + + writel(tmpaddr, &addr); + + return size; +} + +void __init prom_meminit(void) +{ + unsigned long pages; + + pages = memsize() >> PAGE_SHIFT; + add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, + BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing to free */ +} diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c new file mode 100644 index 0000000000000000000000000000000000000000..542244961780dac3b6cd6f39335bc1f8e0f4fb52 --- /dev/null +++ b/arch/mips/ar7/platform.c @@ -0,0 +1,555 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau + * Copyright (C) 2006,2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct plat_vlynq_data { + struct plat_vlynq_ops ops; + int gpio_bit; + int reset_bit; +}; + + +static int vlynq_on(struct vlynq_device *dev) +{ + int result; + struct plat_vlynq_data *pdata = dev->dev.platform_data; + + result = gpio_request(pdata->gpio_bit, "vlynq"); + if (result) + goto out; + + ar7_device_reset(pdata->reset_bit); + + result = ar7_gpio_disable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = ar7_gpio_enable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = gpio_direction_output(pdata->gpio_bit, 0); + if (result) + goto out_gpio_enabled; + + msleep(50); + + gpio_set_value(pdata->gpio_bit, 1); + msleep(50); + + return 0; + +out_gpio_enabled: + ar7_gpio_disable(pdata->gpio_bit); +out_enabled: + ar7_device_disable(pdata->reset_bit); + gpio_free(pdata->gpio_bit); +out: + return result; +} + +static void vlynq_off(struct vlynq_device *dev) +{ + struct plat_vlynq_data *pdata = dev->dev.platform_data; + ar7_gpio_disable(pdata->gpio_bit); + gpio_free(pdata->gpio_bit); + ar7_device_disable(pdata->reset_bit); +} + +static struct resource physmap_flash_resource = { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, + .end = 0x107fffff, +}; + +static struct resource cpmac_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC0, + .end = AR7_REGS_MAC0 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 27, + .end = 27, + }, +}; + +static struct resource cpmac_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC1, + .end = AR7_REGS_MAC1 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 41, + .end = 41, + }, +}; + +static struct resource vlynq_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ0, + .end = AR7_REGS_VLYNQ0 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 29, + .end = 29, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x04000000, + .end = 0x04ffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 80, + .end = 111, + }, +}; + +static struct resource vlynq_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ1, + .end = AR7_REGS_VLYNQ1 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 33, + .end = 33, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x0c000000, + .end = 0x0cffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 112, + .end = 143, + }, +}; + +static struct resource usb_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_USB, + .end = AR7_REGS_USB + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 32, + .end = 32, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x03400000, + .end = 0x034001fff, + }, +}; + +static struct physmap_flash_data physmap_flash_data = { + .width = 2, +}; + +static struct plat_cpmac_data cpmac_low_data = { + .reset_bit = 17, + .power_bit = 20, + .phy_mask = 0x80000000, +}; + +static struct plat_cpmac_data cpmac_high_data = { + .reset_bit = 21, + .power_bit = 22, + .phy_mask = 0x7fffffff, +}; + +static struct plat_vlynq_data vlynq_low_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 20, + .gpio_bit = 18, +}; + +static struct plat_vlynq_data vlynq_high_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 16, + .gpio_bit = 19, +}; + +static struct platform_device physmap_flash = { + .id = 0, + .name = "physmap-flash", + .dev.platform_data = &physmap_flash_data, + .resource = &physmap_flash_resource, + .num_resources = 1, +}; + +static u64 cpmac_dma_mask = DMA_32BIT_MASK; +static struct platform_device cpmac_low = { + .id = 0, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_low_data, + }, + .resource = cpmac_low_res, + .num_resources = ARRAY_SIZE(cpmac_low_res), +}; + +static struct platform_device cpmac_high = { + .id = 1, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_high_data, + }, + .resource = cpmac_high_res, + .num_resources = ARRAY_SIZE(cpmac_high_res), +}; + +static struct platform_device vlynq_low = { + .id = 0, + .name = "vlynq", + .dev.platform_data = &vlynq_low_data, + .resource = vlynq_low_res, + .num_resources = ARRAY_SIZE(vlynq_low_res), +}; + +static struct platform_device vlynq_high = { + .id = 1, + .name = "vlynq", + .dev.platform_data = &vlynq_high_data, + .resource = vlynq_high_res, + .num_resources = ARRAY_SIZE(vlynq_high_res), +}; + + +static struct gpio_led default_leds[] = { + { + .name = "status", + .gpio = 8, + .active_low = 1, + }, +}; + +static struct gpio_led dsl502t_leds[] = { + { + .name = "status", + .gpio = 9, + .active_low = 1, + }, + { + .name = "ethernet", + .gpio = 7, + .active_low = 1, + }, + { + .name = "usb", + .gpio = 12, + .active_low = 1, + }, +}; + +static struct gpio_led dg834g_leds[] = { + { + .name = "ppp", + .gpio = 6, + .active_low = 1, + }, + { + .name = "status", + .gpio = 7, + .active_low = 1, + }, + { + .name = "adsl", + .gpio = 8, + .active_low = 1, + }, + { + .name = "wifi", + .gpio = 12, + .active_low = 1, + }, + { + .name = "power", + .gpio = 14, + .active_low = 1, + .default_trigger = "default-on", + }, +}; + +static struct gpio_led fb_sl_leds[] = { + { + .name = "1", + .gpio = 7, + }, + { + .name = "2", + .gpio = 13, + .active_low = 1, + }, + { + .name = "3", + .gpio = 10, + .active_low = 1, + }, + { + .name = "4", + .gpio = 12, + .active_low = 1, + }, + { + .name = "5", + .gpio = 9, + .active_low = 1, + }, +}; + +static struct gpio_led fb_fon_leds[] = { + { + .name = "1", + .gpio = 8, + }, + { + .name = "2", + .gpio = 3, + .active_low = 1, + }, + { + .name = "3", + .gpio = 5, + }, + { + .name = "4", + .gpio = 4, + .active_low = 1, + }, + { + .name = "5", + .gpio = 11, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ar7_led_data; + +static struct platform_device ar7_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ar7_led_data, + } +}; + +static struct platform_device ar7_udc = { + .id = -1, + .name = "ar7_udc", + .resource = usb_res, + .num_resources = ARRAY_SIZE(usb_res), +}; + +static inline unsigned char char2hex(char h) +{ + switch (h) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + return h - '0'; + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': + return h - 'A' + 10; + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': + return h - 'a' + 10; + default: + return 0; + } +} + +static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{ + int i; + char name[5], default_mac[ETH_ALEN], *mac; + + mac = NULL; + sprintf(name, "mac%c", 'a' + instance); + mac = prom_getenv(name); + if (!mac) { + sprintf(name, "mac%c", 'a'); + mac = prom_getenv(name); + } + if (!mac) { + random_ether_addr(default_mac); + mac = default_mac; + } + for (i = 0; i < 6; i++) + dev_addr[i] = (char2hex(mac[i * 3]) << 4) + + char2hex(mac[i * 3 + 1]); +} + +static void __init detect_leds(void) +{ + char *prid, *usb_prod; + + /* Default LEDs */ + ar7_led_data.num_leds = ARRAY_SIZE(default_leds); + ar7_led_data.leds = default_leds; + + /* FIXME: the whole thing is unreliable */ + prid = prom_getenv("ProductID"); + usb_prod = prom_getenv("usb_prod"); + + /* If we can't get the product id from PROM, use the default LEDs */ + if (!prid) + return; + + if (strstr(prid, "Fritz_Box_FON")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); + ar7_led_data.leds = fb_fon_leds; + } else if (strstr(prid, "Fritz_Box_")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); + ar7_led_data.leds = fb_sl_leds; + } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB")) + && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { + ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); + ar7_led_data.leds = dsl502t_leds; + } else if (strstr(prid, "DG834")) { + ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); + ar7_led_data.leds = dg834g_leds; + } +} + +static int __init ar7_register_devices(void) +{ + int res; + static struct uart_port uart_port[2]; + + memset(uart_port, 0, sizeof(struct uart_port) * 2); + + uart_port[0].type = PORT_16550A; + uart_port[0].line = 0; + uart_port[0].irq = AR7_IRQ_UART0; + uart_port[0].uartclk = ar7_bus_freq() / 2; + uart_port[0].iotype = UPIO_MEM32; + uart_port[0].mapbase = AR7_REGS_UART0; + uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); + uart_port[0].regshift = 2; + res = early_serial_setup(&uart_port[0]); + if (res) + return res; + + + /* Only TNETD73xx have a second serial port */ + if (ar7_has_second_uart()) { + uart_port[1].type = PORT_16550A; + uart_port[1].line = 1; + uart_port[1].irq = AR7_IRQ_UART1; + uart_port[1].uartclk = ar7_bus_freq() / 2; + uart_port[1].iotype = UPIO_MEM32; + uart_port[1].mapbase = UR8_REGS_UART1; + uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); + uart_port[1].regshift = 2; + res = early_serial_setup(&uart_port[1]); + if (res) + return res; + } + + res = platform_device_register(&physmap_flash); + if (res) + return res; + + ar7_device_disable(vlynq_low_data.reset_bit); + res = platform_device_register(&vlynq_low); + if (res) + return res; + + if (ar7_has_high_vlynq()) { + ar7_device_disable(vlynq_high_data.reset_bit); + res = platform_device_register(&vlynq_high); + if (res) + return res; + } + + if (ar7_has_high_cpmac()) { + cpmac_get_mac(1, cpmac_high_data.dev_addr); + res = platform_device_register(&cpmac_high); + if (res) + return res; + } else { + cpmac_low_data.phy_mask = 0xffffffff; + } + + cpmac_get_mac(0, cpmac_low_data.dev_addr); + res = platform_device_register(&cpmac_low); + if (res) + return res; + + detect_leds(); + res = platform_device_register(&ar7_gpio_leds); + if (res) + return res; + + res = platform_device_register(&ar7_udc); + + return res; +} +arch_initcall(ar7_register_devices); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c new file mode 100644 index 0000000000000000000000000000000000000000..a320bceb2f9dbf9d08ad0ddc396ad4bb037df683 --- /dev/null +++ b/arch/mips/ar7/prom.c @@ -0,0 +1,297 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MAX_ENTRY 80 + +struct env_var { + char *name; + char *value; +}; + +static struct env_var adam2_env[MAX_ENTRY]; + +char *prom_getenv(const char *name) +{ + int i; + for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) + if (!strcmp(name, adam2_env[i].name)) + return adam2_env[i].value; + + return NULL; +} +EXPORT_SYMBOL(prom_getenv); + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +static void __init ar7_init_cmdline(int argc, char *argv[]) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < argc) { + strcpy(cp, argv[actr]); + cp += strlen(argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} + +struct psbl_rec { + u32 psbl_size; + u32 env_base; + u32 env_size; + u32 ffs_base; + u32 ffs_size; +}; + +static __initdata char psp_env_version[] = "TIENV0.8"; + +struct psp_env_chunk { + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; +} __attribute__ ((packed)); + +struct psp_var_map_entry { + u8 num; + char *value; +}; + +static struct psp_var_map_entry psp_var_map[] = { + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, +}; + +/* + +Well-known variable (num is looked up in table above for matching variable name) +Example: cpufrequency=211968000 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in a single chunk +Example: NAME=VALUE ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Data is padded with 0xFF + +*/ + +#define PSP_ENV_SIZE 4096 + +static char psp_env_data[PSP_ENV_SIZE] = { 0, }; + +static char * __init lookup_psp_var_map(u8 num) +{ + int i; + + for (i = 0; i < sizeof(psp_var_map); i++) + if (psp_var_map[i].num == num) + return psp_var_map[i].value; + + return NULL; +} + +static void __init add_adam2_var(char *name, char *value) +{ + int i; + for (i = 0; i < MAX_ENTRY; i++) { + if (!adam2_env[i].name) { + adam2_env[i].name = name; + adam2_env[i].value = value; + return; + } else if (!strcmp(adam2_env[i].name, name)) { + adam2_env[i].value = value; + return; + } + } +} + +static int __init parse_psp_env(void *psp_env_base) +{ + int i, n; + char *name, *value; + struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; + + memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); + + i = 1; + n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); + while (i < n) { + if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) + break; + value = chunks[i].data; + if (chunks[i].num) { + name = lookup_psp_var_map(chunks[i].num); + } else { + name = value; + value += strlen(name) + 1; + } + if (name) + add_adam2_var(name, value); + i += chunks[i].len; + } + return 0; +} + +static void __init ar7_init_env(struct env_var *env) +{ + int i; + struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); + void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + + if (strcmp(psp_env, psp_env_version) == 0) { + parse_psp_env(psp_env); + } else { + for (i = 0; i < MAX_ENTRY; i++, env++) + if (env->name) + add_adam2_var(env->name, env->value); + } +} + +static void __init console_config(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s, *p; + + if (strstr(prom_getcmdline(), "console=")) + return; + +#ifdef CONFIG_KGDB + if (!strstr(prom_getcmdline(), "nokgdb")) { + strcat(prom_getcmdline(), " console=kgdb"); + kgdb_enabled = 1; + return; + } +#endif + + s = prom_getenv("modetty0"); + if (s) { + baud = simple_strtoul(s, &p, 10); + s = p; + if (*s == ',') + s++; + if (*s) + parity = *s++; + if (*s == ',') + s++; + if (*s) + bits = *s++; + if (*s == ',') + s++; + if (*s == 'h') + flow = 'r'; + } + + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + + if (flow == 'r') + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, + parity, bits, flow); + else + sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity, + bits); + strcat(prom_getcmdline(), console_string); +#endif +} + +void __init prom_init(void) +{ + ar7_init_cmdline(fw_arg0, (char **)fw_arg1); + ar7_init_env((struct env_var *)fw_arg2); + console_config(); +} + +#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) +static inline unsigned int serial_in(int offset) +{ + return readl((void *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + writel(value, (void *)PORT(offset)); +} + +char prom_getchar(void) +{ + while (!(serial_in(UART_LSR) & UART_LSR_DR)) + ; + return serial_in(UART_RX); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0) + ; + serial_out(UART_TX, c); + return 1; +} + diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c new file mode 100644 index 0000000000000000000000000000000000000000..6ebb5f16d96754db34e7e01757cbdc397a889a3c --- /dev/null +++ b/arch/mips/ar7/setup.c @@ -0,0 +1,94 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +static void ar7_machine_restart(char *command) +{ + u32 *softres_reg = ioremap(AR7_REGS_RESET + + AR7_RESET_SOFTWARE, 1); + writel(1, softres_reg); +} + +static void ar7_machine_halt(void) +{ + while (1) + ; +} + +static void ar7_machine_power_off(void) +{ + u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); + u32 power_state = readl(power_reg) | (3 << 30); + writel(power_state, power_reg); + ar7_machine_halt(); +} + +const char *get_system_type(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7300: + return "TI AR7 (TNETD7300)"; + case AR7_CHIP_7100: + return "TI AR7 (TNETD7100)"; + case AR7_CHIP_7200: + return "TI AR7 (TNETD7200)"; + default: + return "TI AR7 (Unknown)"; + } +} + +static int __init ar7_init_console(void) +{ + return 0; +} +console_initcall(ar7_init_console); + +/* + * Initializes basic routines and structures pointers, memory size (as + * given by the bios and saves the command line. + */ + +void __init plat_mem_setup(void) +{ + unsigned long io_base; + + _machine_restart = ar7_machine_restart; + _machine_halt = ar7_machine_halt; + pm_power_off = ar7_machine_power_off; + panic_timeout = 3; + + io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); + if (!io_base) + panic("Can't remap IO base!\n"); + set_io_port_base(io_base); + + prom_meminit(); + + printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", + get_system_type(), + ar7_chip_id(), ar7_chip_rev()); +} diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c new file mode 100644 index 0000000000000000000000000000000000000000..a1fba894daa25b6d15f27e545e01ad26013dfc36 --- /dev/null +++ b/arch/mips/ar7/time.c @@ -0,0 +1,30 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include +#include + +#include +#include + +void __init plat_time_init(void) +{ + mips_hpt_frequency = ar7_cpu_freq() / 2; +} diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 7c0528b0e34ccabd1668bcd5c3b4436076f00e76..d6903c3f3d513c0cd0990138aaada2445d27562b 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PCI) += pci-common.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_PCI_MSI) += msi.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 627c162a615980df13bffda63dc8517d66ac5695..4b92bfc662db0b629e253a92336a9396b41555ac 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -29,7 +29,7 @@ #include #ifdef CONFIG_PCI -#include "pci-common.h" +#include #endif #define BAR2_PCI_ADDRESS 0x8000000000ul diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c deleted file mode 100644 index cd029f88da7fab454367bcbaa15886be031cfbcf..0000000000000000000000000000000000000000 --- a/arch/mips/cavium-octeon/pci-common.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#include -#include -#include -#include -#include -#include -#include "pci-common.h" - -typeof(pcibios_map_irq) *octeon_pcibios_map_irq; -enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; - -/** - * Map a PCI device to the appropriate interrupt line - * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. - * @return Interrupt number for the device - */ -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (octeon_pcibios_map_irq) - return octeon_pcibios_map_irq(dev, slot, pin); - else - panic("octeon_pcibios_map_irq doesn't point to a " - "pcibios_map_irq() function"); -} - - -/** - * Called to perform platform specific PCI setup - * - * @param dev - * @return - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - uint16_t config; - uint32_t dconfig; - int pos; - /* - * Force the Cache line setting to 64 bytes. The standard - * Linux bus scan doesn't seem to set it. Octeon really has - * 128 byte lines, but Intel bridges get really upset if you - * try and set values above 64 bytes. Value is specified in - * 32bit words. - */ - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); - /* Set latency timers for all devices */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); - - /* Enable reporting System errors and parity errors on all devices */ - /* Enable parity checking and error reporting */ - pci_read_config_word(dev, PCI_COMMAND, &config); - config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - pci_write_config_word(dev, PCI_COMMAND, config); - - if (dev->subordinate) { - /* Set latency timers on sub bridges */ - pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); - /* More bridge error detection */ - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); - config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); - } - - /* Enable the PCIe normal error reporting */ - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (pos) { - /* Update Device Control */ - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); - /* Correctable Error Reporting */ - config |= PCI_EXP_DEVCTL_CERE; - /* Non-Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_NFERE; - /* Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_FERE; - /* Unsupported Request */ - config |= PCI_EXP_DEVCTL_URRE; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); - } - - /* Find the Advanced Error Reporting capability */ - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - if (pos) { - /* Clear Uncorrectable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - dconfig); - /* Enable reporting of all uncorrectable errors */ - /* Uncorrectable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); - /* - * Leave severity at HW default. This only controls if - * errors are reported as uncorrectable or - * correctable, not if the error is reported. - */ - /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ - /* Clear Correctable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); - /* Enable reporting of all correctable errors */ - /* Correctable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); - /* Advanced Error Capabilities */ - pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); - /* ECRC Generation Enable */ - if (config & PCI_ERR_CAP_ECRC_GENC) - config |= PCI_ERR_CAP_ECRC_GENE; - /* ECRC Check Enable */ - if (config & PCI_ERR_CAP_ECRC_CHKC) - config |= PCI_ERR_CAP_ECRC_CHKE; - pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); - /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ - /* Report all errors to the root complex */ - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, - PCI_ERR_ROOT_CMD_COR_EN | - PCI_ERR_ROOT_CMD_NONFATAL_EN | - PCI_ERR_ROOT_CMD_FATAL_EN); - /* Clear the Root status register */ - pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); - } - - return 0; -} diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c index 9e143989c7b8b889dcabc900fa86058d9c1517b2..4eaec8b46e0ce16280b70f261e1199fcf0959ee6 100644 --- a/arch/mips/cobalt/buttons.c +++ b/arch/mips/cobalt/buttons.c @@ -1,7 +1,7 @@ /* * Cobalt buttons platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c index 0720e4fae3112c41fb3c52cff618ad22bb5d4134..0f1cd90f37edcbcfcfa37447831045777374fbc5 100644 --- a/arch/mips/cobalt/lcd.c +++ b/arch/mips/cobalt/lcd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LCD platform device. * - * Copyright (C) 2008 Yoichi Yuasa + * Copyright (C) 2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c index 1c6ebd468b07ff3f440f5fd2401c7f78b4d1c3f6..d3ce6fa1dc74cec54c66d6e973ae03eeb429e2e0 100644 --- a/arch/mips/cobalt/led.c +++ b/arch/mips/cobalt/led.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LED platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c index 2b088ef3839a4b69d275b3b2e30eedc31051198c..691d620b6766a078b51c051ceeb4c57af4e76033 100644 --- a/arch/mips/cobalt/mtd.c +++ b/arch/mips/cobalt/mtd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt MTD device. * - * Copyright (C) 2006 Yoichi Yuasa + * Copyright (C) 2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c index e70794b8bcba897dc818a196c44581e4b6cac7ab..3ab39898b4e46b3a3b7c5615b8b5fe85b5e8473b 100644 --- a/arch/mips/cobalt/rtc.c +++ b/arch/mips/cobalt/rtc.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c index 53b8d0d6da90824ccc2d4447526f205bf36ed506..7cb51f57275e584bdf4d7ba61762e004023f01d7 100644 --- a/arch/mips/cobalt/serial.c +++ b/arch/mips/cobalt/serial.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c index 4a570e7145fe65fc0d551f60600feb916541bc3c..0162f9edc693c57bcf35c614be66289eb3db7f90 100644 --- a/arch/mips/cobalt/time.c +++ b/arch/mips/cobalt/time.c @@ -1,7 +1,7 @@ /* * Cobalt time initialization. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..dad5b6769d746c4a2e6b09004c10b1b576dc62f1 --- /dev/null +++ b/arch/mips/configs/ar7_defconfig @@ -0,0 +1,1182 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Wed Jun 24 14:08:59 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +CONFIG_AR7=y +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_NO_EXCEPT_FILL=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +CONFIG_HZ_100=y +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_KEXEC=y +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_PROBE_INITRD_HEADER=y +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +CONFIG_TCP_CONG_WESTWOOD=y +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +# CONFIG_NF_CT_ACCT is not set +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=m +# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +CONFIG_ATM=m +# CONFIG_ATM_CLIP is not set +# CONFIG_ATM_LANE is not set +CONFIG_ATM_BR2684=m +CONFIG_ATM_BR2684_IPFILTER=y +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_ATM is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +CONFIG_CPMAC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AR7_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_SERIAL=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_DRIVER_EXTIF=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_VLYNQ=y +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c index 5ec1c2ffd3a5e24b8c588156288c26195ebfb84e..6f9d0858f596e1ad53445c051a057b0cad348b22 100644 --- a/arch/mips/gt64120/wrppmc/serial.c +++ b/arch/mips/gt64120/wrppmc/serial.c @@ -1,7 +1,7 @@ /* * Registration of WRPPMC UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h new file mode 100644 index 0000000000000000000000000000000000000000..c3dc1a68dd8d906f88bbb72769652f66d7aebc8d --- /dev/null +++ b/arch/mips/include/asm/amon.h @@ -0,0 +1,7 @@ +/* + * Amon support + */ + +int amon_cpu_avail(int); +void amon_cpu_start(int, unsigned long, unsigned long, + unsigned long, unsigned long); diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h index ba1702e86931bff400708ee1c6d23089c9e705ed..3af0b8fb3b8c23500f9cd7476f769ae36cc05cfc 100644 --- a/arch/mips/include/asm/ds1287.h +++ b/arch/mips/include/asm/ds1287.h @@ -1,7 +1,7 @@ /* * DS1287 timer functions. * - * Copyright (C) 2008 Yoichi Yuasa + * Copyright (C) 2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index d58f128aa747be974ac10ffd5fb1749d3292f505..7990694cda221dbd9f0da1c2b11b4f8e77688680 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); extern int dump_task_regs(struct task_struct *, elf_gregset_t *); extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); +#ifndef ELF_CORE_COPY_REGS #define ELF_CORE_COPY_REGS(elf_regs, regs) \ elf_dump_regs((elf_greg_t *)&(elf_regs), regs); +#endif +#ifndef ELF_CORE_COPY_TASK_REGS #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#endif #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index d74a8a4ca861a9d5b2de96e995e5e7b1302b26d5..36fd969d64d6fc83a1b37daf5a22fe3b46c504b1 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -114,4 +114,6 @@ #define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ +extern int __init gcmp_probe(unsigned long, unsigned long); + #endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 954807d9d66ae82233cc48362c0ebeb7ce144eff..10292e37c1f714b56d2b4eb854f180cc8f5c0975 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -20,7 +20,11 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 +#if CONFIG_SMP +#define GIC_NUM_INTRS (24 + NR_CPUS * 2) +#else #define GIC_NUM_INTRS 32 +#endif #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) @@ -483,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr, extern unsigned int gic_get_int(void); extern void gic_send_ipi(unsigned int intr); +extern unsigned int plat_ipi_call_int_xlate(unsigned int); +extern unsigned int plat_ipi_resched_int_xlate(unsigned int); #endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h index f9a7c3ac2e6677445e25a47df7248b1fd2773f19..250a2407b599c32b51b71d803bce7c4694666854 100644 --- a/arch/mips/include/asm/irq_gt641xx.h +++ b/arch/mips/include/asm/irq_gt641xx.h @@ -1,7 +1,7 @@ /* * Galileo/Marvell GT641xx IRQ definitions. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h new file mode 100644 index 0000000000000000000000000000000000000000..de71694614de85e25cc2c64319517ca73e5b5219 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau + * Copyright (C) 2006,2007 Eugene Konev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_H__ +#define __AR7_H__ + +#include +#include +#include + +#include + +#define AR7_SDRAM_BASE 0x14000000 + +#define AR7_REGS_BASE 0x08610000 + +#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) +#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) +/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) +#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) +#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) +#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) +#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) +#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) +#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) +#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) + +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + +#define AR7_RESET_PEREPHERIAL 0x0 +#define AR7_RESET_SOFTWARE 0x4 +#define AR7_RESET_STATUS 0x8 + +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 + +/* GPIO control registers */ +#define AR7_GPIO_INPUT 0x0 +#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_DIR 0x8 +#define AR7_GPIO_ENABLE 0xc + +#define AR7_CHIP_7100 0x18 +#define AR7_CHIP_7200 0x2b +#define AR7_CHIP_7300 0x05 + +/* Interrupts */ +#define AR7_IRQ_UART0 15 +#define AR7_IRQ_UART1 16 + +/* Clocks */ +#define AR7_AFE_CLOCK 35328000 +#define AR7_REF_CLOCK 25000000 +#define AR7_XTAL_CLOCK 24000000 + +struct plat_cpmac_data { + int reset_bit; + int power_bit; + u32 phy_mask; + char dev_addr[6]; +}; + +struct plat_dsl_data { + int reset_bit_dsl; + int reset_bit_sar; +}; + +extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; + +static inline u16 ar7_chip_id(void) +{ + return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; +} + +static inline u8 ar7_chip_rev(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; +} + +static inline int ar7_cpu_freq(void) +{ + return ar7_cpu_clock; +} + +static inline int ar7_bus_freq(void) +{ + return ar7_bus_clock; +} + +static inline int ar7_vbus_freq(void) +{ + return ar7_bus_clock / 2; +} +#define ar7_cpmac_freq ar7_vbus_freq + +static inline int ar7_dsp_freq(void) +{ + return ar7_dsp_clock; +} + +static inline int ar7_has_high_cpmac(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + return 0; + case AR7_CHIP_7300: + return 1; + default: + return -ENXIO; + } +} +#define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac + +static inline void ar7_device_enable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) | (1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_disable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) & ~(1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_reset(u32 bit) +{ + ar7_device_disable(bit); + ar7_device_enable(bit); +} + +static inline void ar7_device_on(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) | (1 << bit), power_reg); + msleep(20); +} + +static inline void ar7_device_off(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) & ~(1 << bit), power_reg); + msleep(20); +} + +#endif /* __AR7_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..cbe9c4f126df6ca549ebaf374dd2d5eab203496d --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/gpio.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_GPIO_H__ +#define __AR7_GPIO_H__ + +#include + +#define AR7_GPIO_MAX 32 + +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); + +/* Common GPIO layer */ +static inline int gpio_get_value(unsigned gpio) +{ + void __iomem *gpio_in = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); + + return readl(gpio_in) & (1 << gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + void __iomem *gpio_out = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); + unsigned tmp; + + tmp = readl(gpio_out) & ~(1 << gpio); + if (value) + tmp |= 1 << gpio; + writel(tmp, gpio_out); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_dir) | (1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + gpio_set_value(gpio, value); + writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +/* Board specific GPIO functions */ +static inline int ar7_gpio_enable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) | (1 << gpio), gpio_en); + + return 0; +} + +static inline int ar7_gpio_disable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) & ~(1 << gpio), gpio_en); + + return 0; +} + +#include + +#endif diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h new file mode 100644 index 0000000000000000000000000000000000000000..39e9757e3d9388d8951e220202d4408ecf01d4a9 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/irq.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Shamelessly copied from asm-mips/mach-emma2rh/ + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_AR7_IRQ_H +#define __ASM_AR7_IRQ_H + +#define NR_IRQS 256 + +#include_next + +#endif /* __ASM_AR7_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h new file mode 100644 index 0000000000000000000000000000000000000000..088f61fe85ea6ce1bda03a814960e2de3929b3a7 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/prom.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006, 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __PROM_H__ +#define __PROM_H__ + +extern char *prom_getenv(const char *name); +extern void prom_meminit(void); + +#endif /* __PROM_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h new file mode 100644 index 0000000000000000000000000000000000000000..ac28f273449cfdde16cb2456aa24ac8af537c376 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_AR7_SPACES_H +#define _ASM_AR7_SPACES_H + +/* + * This handles the memory map. + * We handle pages at KSEG0 for kernels with 32 bit address space. + */ +#define PAGE_OFFSET 0x94000000UL +#define PHYS_OFFSET 0x14000000UL + +#include + +#endif /* __ASM_AR7_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h new file mode 100644 index 0000000000000000000000000000000000000000..f4862b563080c2d9f9b9c22e9e0633aa63450b37 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_AR7_WAR_H +#define __ASM_MIPS_MACH_AR7_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_AR7_WAR_H */ diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h index 57c8c9ac585162b6a16a32d912d7d438d0a772be..9da9acf5dcba4754642404fc05380946aa4a7ff8 100644 --- a/arch/mips/include/asm/mach-cobalt/irq.h +++ b/arch/mips/include/asm/mach-cobalt/irq.h @@ -8,7 +8,7 @@ * Copyright (C) 1997 Cobalt Microserver * Copyright (C) 1997, 2003 Ralf Baechle * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa */ #ifndef _ASM_COBALT_IRQ_H #define _ASM_COBALT_IRQ_H diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h index ae9c5523c7effae9679ce4c3b79a290121d58fd0..f8afec3f294330ea4322211f7b640f4146aabad8 100644 --- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Yoichi Yuasa + * Copyright (C) 2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/include/asm/octeon/pci-octeon.h similarity index 52% rename from arch/mips/cavium-octeon/pci-common.h rename to arch/mips/include/asm/octeon/pci-octeon.h index 74ae79991e456410f35424b09b4d180feceab6cc..6ac5d3e3398eaff20144dafc5190910eb8f4ef13 100644 --- a/arch/mips/cavium-octeon/pci-common.h +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -3,23 +3,29 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ -#ifndef __OCTEON_PCI_COMMON_H__ -#define __OCTEON_PCI_COMMON_H__ + +#ifndef __PCI_OCTEON_H__ +#define __PCI_OCTEON_H__ #include /* Some PCI cards require delays when accessing config space. */ #define PCI_CONFIG_SPACE_DELAY 10000 -/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the - Octeon specific version pointed to by this variable. This function needs to - change for PCI or PCIe based hosts */ -extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; +/* + * pcibios_map_irq() is defined inside pci-octeon.c. All it does is + * call the Octeon specific version pointed to by this variable. This + * function needs to change for PCI or PCIe based hosts. + */ +extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); -/* The following defines are only used when octeon_dma_bar_type = - OCTEON_DMA_BAR_TYPE_BIG */ +/* + * The following defines are used when octeon_dma_bar_type = + * OCTEON_DMA_BAR_TYPE_BIG + */ #define OCTEON_PCI_BAR1_HOLE_BITS 5 #define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) @@ -30,9 +36,9 @@ enum octeon_dma_bar_type { OCTEON_DMA_BAR_TYPE_PCIE }; -/** - * This is a variable to tell the DMA mapping system in dma-octeon.c - * how to map PCI DMA addresses. +/* + * This tells the DMA mapping system in dma-octeon.c how to map PCI + * DMA addresses. */ extern enum octeon_dma_bar_type octeon_dma_bar_type; diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index dc0eaa7312816112a006cb6af0a0b0b6f5022979..96a14a426a7c39f7e2d4ccf5bef49a7be5c425f7 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + /* avoid include hell */ \ + extern unsigned long min_low_pfn; \ + \ + __pfn >= min_low_pfn && __pfn < max_mapnr; \ +}) #elif defined(CONFIG_SPARSEMEM) diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h index 634b55d7e7f6d1ada10dfa02175c11a81790f78d..910e71a12466de2f1fb3f1fab82c6203ef062e63 100644 --- a/arch/mips/include/asm/reg.h +++ b/arch/mips/include/asm/reg.h @@ -69,7 +69,7 @@ #endif -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H) #define EF_R0 0 #define EF_R1 1 diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h index 99993c0d6c12bb3ea50996991c8072ed254d7155..97c2f81b4b43af66d766778ea2c17dcca6d8303b 100644 --- a/arch/mips/include/asm/swab.h +++ b/arch/mips/include/asm/swab.h @@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) } #define __arch_swab32 __arch_swab32 -#ifdef CONFIG_CPU_MIPS64_R2 +/* + * Having already checked for CONFIG_CPU_MIPSR2, enable the + * optimized version for 64-bit kernel on r2 CPUs. + */ +#ifdef CONFIG_64BIT static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( @@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x) return x; } #define __arch_swab64 __arch_swab64 -#endif /* CONFIG_CPU_MIPS64_R2 */ +#endif /* CONFIG_64BIT */ #endif /* CONFIG_CPU_MIPSR2 */ #endif /* _ASM_SWAB_H */ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 143a48136a4b0f7e599adf1ce41d2bea290a7777..f9df720d2e40e215aa0cb21561f467d6d95a2b6b 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -39,8 +39,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ @@ -48,7 +46,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = _TIF_FIXADE, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 40005010827cb4f72c1734778a520a74c7958153..b70c49fdda26afb0b66b6f74f241d570da09ad09 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -352,16 +352,18 @@ #define __NR_inotify_init1 (__NR_Linux + 329) #define __NR_preadv (__NR_Linux + 330) #define __NR_pwritev (__NR_Linux + 331) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332) +#define __NR_perf_counter_open (__NR_Linux + 333) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 331 +#define __NR_Linux_syscalls 333 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 331 +#define __NR_O32_Linux_syscalls 333 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -660,16 +662,18 @@ #define __NR_inotify_init1 (__NR_Linux + 288) #define __NR_preadv (__NR_Linux + 289) #define __NR_pwritev (__NR_Linux + 290) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291) +#define __NR_perf_counter_open (__NR_Linux + 292) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 290 +#define __NR_Linux_syscalls 292 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 290 +#define __NR_64_Linux_syscalls 292 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -972,16 +976,18 @@ #define __NR_inotify_init1 (__NR_Linux + 292) #define __NR_preadv (__NR_Linux + 293) #define __NR_pwritev (__NR_Linux + 294) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295) +#define __NR_perf_counter_open (__NR_Linux + 296) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 294 +#define __NR_Linux_syscalls 296 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 294 +#define __NR_N32_Linux_syscalls 296 #ifdef __KERNEL__ diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h index e0ee05a3dfcccfd3c1bc13e1d843793bfb78f8ba..fcc6569414faaf2fda683289894fa78a32e8f985 100644 --- a/arch/mips/include/asm/vr41xx/capcella.h +++ b/arch/mips/include/asm/vr41xx/capcella.h @@ -1,7 +1,7 @@ /* * capcella.h, Include file for ZAO Networks Capcella. * - * Copyright (C) 2002-2004 Yoichi Yuasa + * Copyright (C) 2002-2004 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h index 0bcdd3a5c2560b6817174af92d1e1dbfe2a9cd07..6a90bc1d916b4aa58ddc57ae6edd8ee40ae9b4ee 100644 --- a/arch/mips/include/asm/vr41xx/giu.h +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series General-purpose I/O Unit. * - * Copyright (C) 2005 Yoichi Yuasa + * Copyright (C) 2005-2009 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,8 @@ typedef enum { IRQ_SIGNAL_HOLD, } irq_signal_t; -extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); +extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal); typedef enum { IRQ_LEVEL_LOW, @@ -50,23 +51,6 @@ typedef enum { extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); -typedef enum { - GPIO_DATA_LOW, - GPIO_DATA_HIGH, - GPIO_DATA_INVAL, -} gpio_data_t; - -extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); -extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); - -typedef enum { - GPIO_INPUT, - GPIO_OUTPUT, - GPIO_OUTPUT_DISABLE, -} gpio_direction_t; - -extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); - typedef enum { GPIO_PULL_DOWN, GPIO_PULL_UP, diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h index d315dfbc08f2c269fcc4b0c1ebfde5b0b38c5292..b07f7321751dd577004e4e3025acc272a09d31f2 100644 --- a/arch/mips/include/asm/vr41xx/irq.h +++ b/arch/mips/include/asm/vr41xx/irq.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2006 Yoichi Yuasa + * Copyright (C) 2003-2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h index 1d67df843dc32d93f9feada3ab2a3d0df5fe0454..130d09d8c8cbbc285a44fca21063569a4004454b 100644 --- a/arch/mips/include/asm/vr41xx/mpc30x.h +++ b/arch/mips/include/asm/vr41xx/mpc30x.h @@ -1,7 +1,7 @@ /* * mpc30x.h, Include file for Victor MP-C303/304. * - * Copyright (C) 2002-2004 Yoichi Yuasa + * Copyright (C) 2002-2004 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h index 6fc01ce1977706fbb09325299342d55d7b073358..c231a3d6cfd8fb5ccb01b1da7cdb72238c1a84b3 100644 --- a/arch/mips/include/asm/vr41xx/pci.h +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series PCI Control Unit. * - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h index da9f6e3734099b31198cf31dd77b6070e158fdbb..ca806bc4ddc8a8857247e3985672a8d343c49a0f 100644 --- a/arch/mips/include/asm/vr41xx/siu.h +++ b/arch/mips/include/asm/vr41xx/siu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series Serial Interface Unit. * - * Copyright (C) 2005-2008 Yoichi Yuasa + * Copyright (C) 2005-2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h index dc981b4be0a404bd0ff3090baccbcd22be8d20ed..c78e8243b447e3b4fde3d697d58be19d125a6c45 100644 --- a/arch/mips/include/asm/vr41xx/tb0219.h +++ b/arch/mips/include/asm/vr41xx/tb0219.h @@ -1,7 +1,7 @@ /* * tb0219.h, Include file for TANBAC TB0219. * - * Copyright (C) 2002-2004 Yoichi Yuasa + * Copyright (C) 2002-2004 Yoichi Yuasa * * Modified for TANBAC TB0219: * Copyright (C) 2003 Megasolution Inc. diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h index de527dcfa5f31b0301430c170aa36cc0afba32bf..36f5f798e4169cb4a05db452960fcb97bbffa9be 100644 --- a/arch/mips/include/asm/vr41xx/tb0226.h +++ b/arch/mips/include/asm/vr41xx/tb0226.h @@ -1,7 +1,7 @@ /* * tb0226.h, Include file for TANBAC TB0226. * - * Copyright (C) 2002-2004 Yoichi Yuasa + * Copyright (C) 2002-2004 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h index 22be64971cc69202823ddb79ff83f32500f1a7da..7b96a43b72ba5e09351f48e21a7d7d01006d1624 100644 --- a/arch/mips/include/asm/vr41xx/vr41xx.h +++ b/arch/mips/include/asm/vr41xx/vr41xx.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2008 Yoichi Yuasa + * Copyright (C) 2003-2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index e1333d7319e275a065546490baa8401b87c9bf47..ff448233dab55737ca2ba1aa54edfa252263b924 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) #include + +/* + * When this file is selected, we are definitely running a 64bit kernel. + * So using the right regs define in asm/reg.h + */ +#define WANT_COMPAT_REG_H + +/* These MUST be defined before elf.h gets included */ +extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs); +#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); +#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \ +({ \ + int __res = 1; \ + elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \ + __res; \ +}) + #include #include #include @@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) value->tv_usec = rem / NSEC_PER_USEC; } -#undef ELF_CORE_COPY_REGS -#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); - void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs) { int i; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 1ada45ea07003d426cf591b2d639d45ffda0c53b..6996da4d74a276ed1d61cf07459fb7ac82dfd7db 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -1,7 +1,7 @@ /* * DS1287 clockevent driver * - * Copyright (C) 2008 Yoichi Yuasa + * Copyright (C) 2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index e9b787feedcb7595fb763e057cfb18a06fb1ede1..92351e00ae0e2ff3f98f8d7432aebf88d659966f 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx clockevent routines. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index b551f48d3a076483eccd3b543f6188c4f87797df..23da108506b0a325a8c0c4f8de12d744129d2676 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -1,7 +1,7 @@ /* * DEC I/O ASIC's counter clocksource * - * Copyright (C) 2008 Yoichi Yuasa + * Copyright (C) 2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 39000f103f2caf250cdd26297e0c70cd33e3b201..d2072cd385922db78c5b1278622ad4d4243a4949 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); return 0; } @@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq) #endif pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { if (!gic_wedgeb2bok) @@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); } static void gic_unmask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); } #ifdef CONFIG_SMP @@ -254,6 +247,10 @@ static void __init gic_basic_init(void) if (cpu == X) continue; + if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 && + _intrmap[i].ipiflag == 0) + continue; + setup_intr(_intrmap[i].intrnum, _intrmap[i].cpunum, _intrmap[i].pin, diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c index 1b81b131f43c9acff2f39b9b954651555020a06a..ebcc5f7ad9c21e6155413e826613c5dc39c58220 100644 --- a/arch/mips/kernel/irq-gt641xx.c +++ b/arch/mips/kernel/irq-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx IRQ routines. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index c4f9ac17474a2157d7a6ab12e0c485cd61b11c48..32644b4a07144979be8d1466ad639787abcf795d 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 0b31b9bda0486988128d39d07d52ac2c0d0ad8d8..20a86e08fd58d4bf942688fd4e4d02d1333d4a8a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -652,6 +652,8 @@ einval: li v0, -ENOSYS sys sys_inotify_init1 1 sys sys_preadv 6 /* 4330 */ sys sys_pwritev 6 + sys sys_rt_tgsigqueueinfo 4 + sys sys_perf_counter_open 5 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index c647fd6e722f7acb2872ad0f01491b6f2a2637e9..b046130d4c5d57338c3aa5aac9b109eff297d412 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -489,4 +489,6 @@ sys_call_table: PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev /* 5390 */ + PTR sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 93cc672f4522169977739553eeb1001ddb40bd2b..15874f9812ccc1cb3fae7d56147fc51502f10810 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -415,4 +415,6 @@ EXPORT(sysn32_call_table) PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo /* 5295 */ + PTR sys_perf_counter_open .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index a5598b2339dd451a4586d3dde4b30050a48c5290..781e0f1e9533ae3f36c9624b3f9554d3c90520a2 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -535,4 +535,6 @@ sys_call_table: PTR sys_inotify_init1 PTR compat_sys_preadv /* 4330 */ PTR compat_sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index 653be061b9ec6745c17cac05f6f5827ed2013b17..ad0ff5dc4d59bfbcdef6e967f1317b0ea2459c3a 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -37,80 +37,24 @@ #include #include #include - -/* - * Crude manipulation of the CPU masks to control which - * which CPU's are brought online during initialisation - * - * Beware... this needs to be called after CPU discovery - * but before CPU bringup - */ -static int __init allowcpus(char *str) -{ - cpumask_t cpu_allow_map; - char buf[256]; - int len; - - cpus_clear(cpu_allow_map); - if (cpulist_parse(str, &cpu_allow_map) == 0) { - cpu_set(0, cpu_allow_map); - cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map); - len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map); - buf[len] = '\0'; - pr_debug("Allowable CPUs: %s\n", buf); - return 1; - } else - return 0; -} -__setup("allowcpus=", allowcpus); +#include +#include static void ipi_call_function(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_call_int_xlate(cpu)); } static void ipi_resched(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_RESCHED_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_RESCHED_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_RESCHED_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_RESCHED_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_resched_int_xlate(cpu)); } /* @@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle) (unsigned long)(gp + sizeof(struct thread_info))); #endif - amon_cpu_start(cpu, pc, sp, gp, a0); + amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0); } /* diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 9021108eb9c1af0edbf67946284ebf3dad8c5513..05dd170a83f7e379ec4e40fe37c454e2c7a4e61a 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -1,7 +1,7 @@ /* * Count register synchronisation. * - * All CPUs will have their count registers synchronised to the CPU0 expirelo + * All CPUs will have their count registers synchronised to the CPU0 next time * value. This can cause a small timewarp for CPU0. All other CPU's should * not have done anything significant (but they may have had interrupts * enabled briefly - prom_smp_finish() should not be responsible for enabling @@ -13,21 +13,22 @@ #include #include #include -#include +#include +#include #include #include -#include #include -static atomic_t __initdata count_start_flag = ATOMIC_INIT(0); -static atomic_t __initdata count_count_start = ATOMIC_INIT(0); -static atomic_t __initdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __init synchronise_count_master(void) +void __cpuinit synchronise_count_master(void) { int i; unsigned long flags; @@ -42,19 +43,20 @@ void __init synchronise_count_master(void) return; #endif - pr_info("Checking COUNT synchronization across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters across %u CPUs: ", + num_online_cpus()); local_irq_save(flags); /* * Notify the slaves that it's time to start */ + atomic_set(&count_reference, read_c0_count()); atomic_set(&count_start_flag, 1); smp_wmb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to current timer for all CPU's */ + initcount = read_c0_count(); /* * We loop a few times to get a primed instruction cache, @@ -106,7 +108,7 @@ void __init synchronise_count_master(void) printk("done.\n"); } -void __init synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(void) { int i; unsigned long flags; @@ -131,8 +133,8 @@ void __init synchronise_count_slave(void) while (!atomic_read(&count_start_flag)) mb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to next expire for all CPU's */ + initcount = atomic_read(&count_reference); ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { @@ -156,4 +158,3 @@ void __init synchronise_count_slave(void) local_irq_restore(flags); } #undef NR_LOOPS -#endif diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3ca5f42e819dc3ab4a6793510216d38218b6bc72..07b9ec2c6e3d04d1194a46a66e6783f2dcf0d29b 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr, return len; out_einval: - return -EINVAL;; + return -EINVAL; } static struct device_attribute vpe_class_attributes[] = { diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index 471c09aa1614ae4aebe0b3d4143cef29e9bd52e9..8c2834f5919da563a06a861206cf37164b06615c 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 475038a141a65038ee34792a6d06395010004a93..27c807b67feaf4fc1a8f7e745462d8dd1bcc9624 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { + int result; + prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -358,12 +361,21 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif + /* Early detection of CMP support */ + result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + #ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); + if (result) + register_smp_ops(&cmp_smp_ops); #endif #ifdef CONFIG_MIPS_MT_SMP +#ifdef CONFIG_MIPS_CMP + if (!result) + register_smp_ops(&vsmp_smp_ops); +#else register_smp_ops(&vsmp_smp_ops); #endif +#endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); #endif diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index b4eaf137e4a7143bf046c04303166e4d7446f7fc..a8756f82c31b9d6d06a7f5191c9d7c67fc28118c 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -331,6 +331,21 @@ static struct irqaction irq_call = { .flags = IRQF_DISABLED|IRQF_PERCPU, .name = "IPI_call" }; + +static int gic_resched_int_base; +static int gic_call_int_base; +#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) +#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) + +unsigned int plat_ipi_call_int_xlate(unsigned int cpu) +{ + return GIC_CALL_INT(cpu); +} + +unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) +{ + return GIC_RESCHED_INT(cpu); +} #endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { @@ -370,7 +385,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); * Interrupts and CPUs/Core Interrupts. The nature of the External * Interrupts is also defined here - polarity/trigger. */ -static struct gic_intr_map gic_intr_map[] = { +static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { GIC_EXT_INTR(0), X, X, X, X, 0 }, { GIC_EXT_INTR(1), X, X, X, X, 0 }, { GIC_EXT_INTR(2), X, X, X, X, 0 }, @@ -387,21 +402,14 @@ static struct gic_intr_map gic_intr_map[] = { { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(15), X, X, X, X, 0 }, - { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +/* This is the end of the general interrupts now we do IPI ones */ }; #endif /* * GCMP needs to be detected before any SMP initialisation */ -static int __init gcmp_probe(unsigned long addr, unsigned long size) +int __init gcmp_probe(unsigned long addr, unsigned long size) { if (gcmp_present >= 0) return gcmp_present; @@ -416,28 +424,36 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size) } #if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) +{ + int intr = baseintr + cpu; + gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr); + gic_intr_map[intr].cpunum = cpu; + gic_intr_map[intr].pin = cpupin; + gic_intr_map[intr].polarity = GIC_POL_POS; + gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; + gic_intr_map[intr].ipiflag = 1; + ipi_map[cpu] |= (1 << (cpupin + 2)); +} + static void __init fill_ipi_map(void) { - int i; + int cpu; - for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { - if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) - ipi_map[gic_intr_map[i].cpunum] |= - (1 << (gic_intr_map[i].pin + 2)); + for (cpu = 0; cpu < NR_CPUS; cpu++) { + fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); + fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); } } #endif void __init arch_init_irq(void) { - int gic_present, gcmp_present; - init_i8259_irqs(); if (!cpu_has_veic) mips_cpu_irq_init(); - gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); if (gcmp_present) { GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; gic_present = 1; @@ -514,24 +530,10 @@ void __init arch_init_irq(void) if (gic_present) { /* FIXME */ int i; - struct { - unsigned int resched; - unsigned int call; - } ipiirq[] = { - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 - } - }; + + gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; + gic_resched_int_base = gic_call_int_base - NR_CPUS; + fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { @@ -553,12 +555,15 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); - - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + for (i = 0; i < NR_CPUS; i++) { + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), &irq_call); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), handle_percpu_irq); } } else { /* set up ipi interrupts */ diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c index 42dee4da37bad5ad5d0b2932b475bf99577d9e2c..f48d60e8429017b52352e8e0b59bc18faa0e9061 100644 --- a/arch/mips/mti-malta/malta-reset.c +++ b/arch/mips/mti-malta/malta-reset.c @@ -28,9 +28,6 @@ #include #include -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - static void mips_machine_restart(char *command) { unsigned int __iomem *softres_reg = diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index e8a97f59e0661e585fc40565212d0e7d74130d1f..63d8a297c58da4f85abf378fa4da6e7e2c9ed5e6 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o + +ifdef CONFIG_PCI_MSI +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o +endif diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c index 1416bca6d1a3f8962bd23e76d34d0668c703d767..1c02f5737367aa7e75569afeb98aebcd3ebb5327 100644 --- a/arch/mips/pci/fixup-capcella.c +++ b/arch/mips/pci/fixup-capcella.c @@ -1,7 +1,7 @@ /* * fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa + * Copyright (C) 2002,2004 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index 5911596257222dec18a807e3fdae132ac2548a50..e08f49cb6875abd65d50b7cb1cee964f816d96b7 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -1,7 +1,7 @@ /* * fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa + * Copyright (C) 2002,2004 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index ed87733f679682d778b4b31a1cd62c10ffbe3f45..8084b17d44066a3f1ca658902f4b191939c91d84 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -2,7 +2,7 @@ * fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups. * * Copyright (C) 2003 Megasolution Inc. - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index e3eedf4bf9bd088567074cd3dc12df6f28fac811..4196ccf3ea3da5e6783de7acd913f68d2fc218bc 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -1,7 +1,7 @@ /* * fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups. * - * Copyright (C) 2002-2005 Yoichi Yuasa + * Copyright (C) 2002-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index 267ab3dc3d421420cde426812bf71ce6d661acaa..2fe29db4372595d5393ab11b38c8ac3f0fff466d 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -1,7 +1,7 @@ /* * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. * - * Copyright (C) 2005 Yoichi Yuasa + * Copyright (C) 2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c similarity index 88% rename from arch/mips/cavium-octeon/msi.c rename to arch/mips/pci/msi-octeon.c index 964b03b75a8f29b775ea0b19d80c1d23763230dc..03742e64765717ec3976c0eb7d7e77c8d8a283e0 100644 --- a/arch/mips/cavium-octeon/msi.c +++ b/arch/mips/pci/msi-octeon.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ #include #include @@ -16,8 +16,7 @@ #include #include #include - -#include "pci-common.h" +#include /* * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is @@ -47,8 +46,8 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); * programming the MSI control bits [6:4] before calling * pci_enable_msi(). * - * @param dev Device requesting MSI interrupts - * @param desc MSI descriptor + * @dev: Device requesting MSI interrupts + * @desc: MSI descriptor * * Returns 0 on success. */ @@ -213,14 +212,9 @@ void arch_teardown_msi_irq(unsigned int irq) } -/** +/* * Called by the interrupt handling code when an MSI interrupt * occurs. - * - * @param cpl - * @param dev_id - * - * @return */ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) { @@ -256,31 +250,37 @@ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) } -/** +/* * Initializes the MSI interrupt handling code - * - * @return */ int octeon_msi_initialize(void) { - int r; if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, IRQF_SHARED, - "MSI[0:63]", octeon_msi_interrupt); + "MSI[0:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); } else if (octeon_is_pci_host()) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, IRQF_SHARED, - "MSI[0:15]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[16:31]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[32:47]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[48:63]", octeon_msi_interrupt); + "MSI[0:15]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[16:31]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[32:47]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[48:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); + } return 0; } diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c index 900c6b32576c3db47e301655f42b5ca4f4c69f4b..28962a7c66066140865072556c741441ee9b2fd8 100644 --- a/arch/mips/pci/ops-vr41xx.c +++ b/arch/mips/pci/ops-vr41xx.c @@ -2,8 +2,8 @@ * ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copyright (C) 2004-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,7 +21,7 @@ */ /* * Changes: - * MontaVista Software Inc. or + * MontaVista Software Inc. * - New creation, NEC VR4122 and VR4131 are supported. */ #include diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c similarity index 78% rename from arch/mips/cavium-octeon/pci.c rename to arch/mips/pci/pci-octeon.c index 67c0ff5e92f1a528a7b133c1df206001cbf7532f..9cb0c807f564bdc00ac7e0f3f4e6ee43d4c1d730 100644 --- a/arch/mips/cavium-octeon/pci.c +++ b/arch/mips/pci/pci-octeon.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ #include #include @@ -17,8 +17,7 @@ #include #include #include - -#include "pci-common.h" +#include #define USE_OCTEON_INTERNAL_ARBITER @@ -54,6 +53,126 @@ union octeon_pci_address { } s; }; +int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); +enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (octeon_pcibios_map_irq) + return octeon_pcibios_map_irq(dev, slot, pin); + else + panic("octeon_pcibios_map_irq not set."); +} + + +/* + * Called to perform platform specific PCI setup + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + uint16_t config; + uint32_t dconfig; + int pos; + /* + * Force the Cache line setting to 64 bytes. The standard + * Linux bus scan doesn't seem to set it. Octeon really has + * 128 byte lines, but Intel bridges get really upset if you + * try and set values above 64 bytes. Value is specified in + * 32bit words. + */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); + /* Set latency timers for all devices */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); + + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (config & PCI_ERR_CAP_ECRC_GENC) + config |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (config & PCI_ERR_CAP_ECRC_CHKC) + config |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Report all errors to the root complex */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + + return 0; +} + /** * Return the mapping of PCI device number to IRQ line. Each * character in the return string represents the interrupt @@ -136,9 +255,8 @@ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, } -/** +/* * Read a value from configuration space - * */ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) @@ -174,15 +292,8 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, } -/** +/* * Write a value to PCI configuration space - * - * @bus: - * @devfn: - * @reg: - * @size: - * @val: - * Returns */ static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) @@ -251,10 +362,8 @@ static struct pci_controller octeon_pci_controller = { }; -/** +/* * Low level initialize the Octeon PCI controller - * - * Returns */ static void octeon_pci_initialize(void) { @@ -398,7 +507,7 @@ static void octeon_pci_initialize(void) pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); } -#endif /* USE_OCTEON_INTERNAL_ARBITER */ +#endif /* USE_OCTEON_INTERNAL_ARBITER */ /* * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, @@ -457,10 +566,8 @@ static void octeon_pci_initialize(void) } -/** +/* * Initialize the Octeon PCI controller - * - * Returns */ static int __init octeon_pci_setup(void) { diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index d1e049b55f34f07f2035f830fd82d7324f8fbe41..56525711f8b75deb270b6c6b7f32db0b38289029 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -2,8 +2,8 @@ * pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copyright (C) 2004-2008 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copyright (C) 2004-2008 Yoichi Yuasa * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -22,7 +22,7 @@ */ /* * Changes: - * MontaVista Software Inc. or + * MontaVista Software Inc. * - New creation, NEC VR4122 and VR4131 are supported. */ #include diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h index 8a35e32b8376f734f61da3a74ec5b8726f5f1e48..6b1ae2eb1c065bc3b5b547ec6ff6258e14f05926 100644 --- a/arch/mips/pci/pci-vr41xx.h +++ b/arch/mips/pci/pci-vr41xx.h @@ -2,8 +2,8 @@ * pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copyright (C) 2004-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c similarity index 98% rename from arch/mips/cavium-octeon/pcie.c rename to arch/mips/pci/pcie-octeon.c index 49d14081b3b5aa2585911f812732a04cf61a7f12..75262247f3e482d445c677dcf6d4d2590b596727 100644 --- a/arch/mips/cavium-octeon/pcie.c +++ b/arch/mips/pci/pcie-octeon.c @@ -18,8 +18,7 @@ #include #include #include - -#include "pci-common.h" +#include union cvmx_pcie_address { uint64_t u64; @@ -976,13 +975,13 @@ static int cvmx_pcie_rc_initialize(int pcie_port) /** * Map a PCI device to the appropriate interrupt line * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux * enumerates through all the bridges and figures out the * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled + * @pin: The PCI interrupt pin read from the device, then swizzled * as it goes through each bridge. - * @return Interrupt number for the device + * Returns Interrupt number for the device */ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -1025,12 +1024,12 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, /** * Read a value from configuration space * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns */ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, int size, @@ -1156,12 +1155,12 @@ static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, /** * Write a value to PCI configuration space * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns */ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, @@ -1254,7 +1253,7 @@ static struct pci_controller octeon_pcie1_controller = { /** * Initialize the Octeon PCIe controllers * - * @return + * Returns */ static int __init octeon_pcie_setup(void) { diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c index 6d9bab8905877fe1b7b0324a4670bd424584b706..719f4a5b984458103ac95de630b0c6d3dfb9d7ae 100644 --- a/arch/mips/vr41xx/casio-e55/setup.c +++ b/arch/mips/vr41xx/casio-e55/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65. * - * Copyright (C) 2002-2006 Yoichi Yuasa + * Copyright (C) 2002-2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c index d77c330a0d592b49b700597529ec48a0f03e2f4a..6346c59c9f9d96d361396944c4e40e4fb20052e6 100644 --- a/arch/mips/vr41xx/common/bcu.c +++ b/arch/mips/vr41xx/common/bcu.c @@ -2,8 +2,8 @@ * bcu.c, Bus Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copyright (C) 2003-2005 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copyright (C) 2003-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. or + * MontaVista Software Inc. * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa + * Yoichi Yuasa * - Added support for NEC VR4133. */ #include diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c index ad0e8e3409d9099d3d6450a31533c1204574b152..8ba7d04a5ec58e4b05cf1d792eb766698b66e850 100644 --- a/arch/mips/vr41xx/common/cmu.c +++ b/arch/mips/vr41xx/common/cmu.c @@ -2,8 +2,8 @@ * cmu.c, Clock Mask Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copuright (C) 2003-2005 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copuright (C) 2003-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. or + * MontaVista Software Inc. * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa + * Yoichi Yuasa * - Added support for NEC VR4133. */ #include diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c index 2b272f1496fe97e55b57975e1850ad32e2ee26e0..22cc6f2100a1acba6d15f983804c3ee46660bdaa 100644 --- a/arch/mips/vr41xx/common/giu.c +++ b/arch/mips/vr41xx/common/giu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series GIU platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 3f23d9fda662621e2879ff37a2d1ecbef24cf1a5..6d39e222b170b1db7250cb990c7726f875127305 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -2,8 +2,8 @@ * icu.c, Interrupt Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa - * Copyright (C) 2003-2006 Yoichi Yuasa + * Author: Yoichi Yuasa + * Copyright (C) 2003-2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. or + * MontaVista Software Inc. * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa + * Yoichi Yuasa * - Coped with INTASSIGN of NEC VR4133. */ #include diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index c64995342ba82f12922267674f46936fbf2b9571..1386e6f081c86aa370e3ddf31179b07b668f9ba0 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -1,7 +1,7 @@ /* * init.c, Common initialization routines for NEC VR4100 series. * - * Copyright (C) 2003-2008 Yoichi Yuasa + * Copyright (C) 2003-2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 9cc389109b19f42ee82f5d09f69b8d3e8de27024..bef06872f012d6ecb055aafeae92d9ed6f962135 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -1,7 +1,7 @@ /* * Interrupt handing routines for NEC VR4100 series. * - * Copyright (C) 2005-2007 Yoichi Yuasa + * Copyright (C) 2005-2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 028aaf75eb216690a5217cfa69fb1bb65a4d4d5f..692b4e85b7fc98475ed33b5a8f3b9efd6733aa67 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -1,7 +1,7 @@ /* * pmu.c, Power Management Unit routines for NEC VR4100 series. * - * Copyright (C) 2003-2007 Yoichi Yuasa + * Copyright (C) 2003-2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c index 9f26c14edcac25cfdbf588babf855c9b0b1d8109..ebc5dcf0ed8e29dad672a529e6cf6abf45c66f6c 100644 --- a/arch/mips/vr41xx/common/rtc.c +++ b/arch/mips/vr41xx/common/rtc.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa + * Copyright (C) 2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c index 654dee6208be2258ce85ef608c0cc7a639696ad4..54eae56108fb94db06a5add150e8baad4ef5dbfe 100644 --- a/arch/mips/vr41xx/common/siu.c +++ b/arch/mips/vr41xx/common/siu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series SIU platform device. * - * Copyright (C) 2007-2008 Yoichi Yuasa + * Copyright (C) 2007-2008 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c index e0c1ac5e988e48335b471f8bf752ac21485a851f..ff841422b6389317567054761990d7d39ff4cb3b 100644 --- a/arch/mips/vr41xx/common/type.c +++ b/arch/mips/vr41xx/common/type.c @@ -1,7 +1,7 @@ /* * type.c, System type for NEC VR4100 series. * - * Copyright (C) 2005 Yoichi Yuasa + * Copyright (C) 2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c index 9eef297eca1a9ec1d52dbe7f3cda2a5ff200a4c8..3982f378a3e603242ebffe85fa45e6e4dbb52ae5 100644 --- a/arch/mips/vr41xx/ibm-workpad/setup.c +++ b/arch/mips/vr41xx/ibm-workpad/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the IBM WorkPad z50. * - * Copyright (C) 2002-2006 Yoichi Yuasa + * Copyright (C) 2002-2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index e58b9a46e1b14a0a8274479de290872ef28063fd..35d2ed6396f60dba7bb02777000a503b192c5a6c 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -70,10 +70,6 @@ struct pci_dev; */ #define PCI_DMA_BUS_IS_PHYS (1) - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (0) - /* Return the index of the PCI controller for device. */ static inline int pci_controller_num(struct pci_dev *dev) { diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 78a3881f3c1250f39eea83dc80a320c826ed650d..58d64f8b2cc3d44769ecdcee23c3ccb9477a4239 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -65,8 +65,6 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ @@ -76,7 +74,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index fef5b434dadcc6977212b6b1c821efbf211ead85..fad68616af32b4a9e73ed955975f9422d7026483 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -346,10 +346,12 @@ #define __NR_inotify_init1 333 #define __NR_preadv 334 #define __NR_pwritev 335 +#define __NR_rt_tgsigqueueinfo 336 +#define __NR_perf_counter_open 337 #ifdef __KERNEL__ -#define NR_syscalls 326 +#define NR_syscalls 338 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 7408a27199f342fd26679db7a326aa0b07885f53..e0d2563af4f24ad68ea2a0b0a72a76489257a99e 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -722,6 +722,8 @@ ENTRY(sys_call_table) .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 335 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c index e143339ad28e00869d9b23c1d882d994cdd89d62..cf847dabc1bd3a7cd810628ea2500bbfd8b922a7 100644 --- a/arch/mn10300/kernel/ptrace.c +++ b/arch/mn10300/kernel/ptrace.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index 9f7572a0f5784a30d9ff16bbcfa407d10fc8a066..feb2f2e810db7c785ea5a7562ac77dfb79666a79 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index bca5a84dc72cced1e6c597a02ec725181a651cfb..29d196b83d258c16c4bff8fbc68e42be157358c6 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 681ad8c9e4fb68b59eebd992a7ee32f8be747e18..91365adba4f5568925d3398545d3b9bcc9ed9f96 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -136,8 +135,7 @@ void show_trace(unsigned long *sp) unsigned long *stack, addr, module_start, module_end; int i; - printk(KERN_EMERG "\n" - KERN_EMERG "Call Trace:"); + printk(KERN_EMERG "\nCall Trace:"); stack = sp; i = 0; @@ -153,7 +151,7 @@ void show_trace(unsigned long *sp) printk("\n"); #else if ((i % 6) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("[<%08lx>] ", addr); i++; #endif @@ -180,7 +178,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) if (((long) stack & (THREAD_SIZE - 1)) == 0) break; if ((i % 8) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("%08lx ", *stack++); } @@ -264,8 +262,7 @@ void show_registers(struct pt_regs *regs) show_stack(current, (unsigned long *) sp); #if 0 - printk(KERN_EMERG "\n" - KERN_EMERG "Code: "); + printk(KERN_EMERG "\nCode: "); if (regs->pc < PAGE_OFFSET) goto bad; @@ -311,16 +308,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code) { console_verbose(); spin_lock_irq(&die_lock); - printk(KERN_EMERG "\n" - KERN_EMERG "%s: %04x\n", + printk(KERN_EMERG "\n%s: %04x\n", str, code & 0xffff); show_registers(regs); if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 && (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) { printk(KERN_EMERG "Exception in usermode interrupt handler\n"); - printk(KERN_EMERG "\n" - KERN_EMERG " Please connect to kernel debugger !!\n"); + printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n"); asm volatile ("0: bra 0b"); } @@ -429,9 +424,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs) { console_verbose(); - printk(KERN_EMERG "\n" - KERN_EMERG "Asynchronous I/O Bus Error\n" - KERN_EMERG "==========================\n"); + printk(KERN_EMERG "Asynchronous I/O Bus Error\n"); + printk(KERN_EMERG "==========================\n"); if (bcberr & BCBERR_BEME) printk(KERN_EMERG "- Multiple recorded errors\n"); diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index bcebcefb4ad7abee8b96bd69e4d231e355fb44d6..c96ba3da95ac15b6b2582fae648925179e2d9d6b 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -61,7 +61,7 @@ SECTIONS _edata = .; /* End of data section */ } - .data.init_task : { INIT_TASK(THREAD_SIZE); } + .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); } /* might get freed after init */ . = ALIGN(PAGE_SIZE); diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index a62e1e138bc101c112872eae8b4eb9e0ce61d8cf..53bb17d0f0687764ab1d8a4e05d6cdfc81c03e25 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include /* For unblank_screen() */ diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 94c4a43580657a74b594561180759b5d2b43c37c..30016251f658507ec5a6501c35028dd74be22716 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9038f39d9d736320996f95e6bae5d10473895da0..06f8d5b5b0f96d4bbb30cc5653cc6490d47df93e 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -16,6 +16,8 @@ config PARISC select RTC_DRV_GENERIC select INIT_ALL_POSSIBLE select BUG + select HAVE_PERF_COUNTERS + select GENERIC_ATOMIC64 if !64BIT help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 7eeaff944360335c8548b0f25e1828432ea55f9b..8bc9e96699b2a690456aa75585a9f89c05cad7bf 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v)))) -#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v)))) +#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v)))) +#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v)))) #define atomic_inc(v) ((void)(__atomic_add_return( 1,(v)))) #define atomic_dec(v) ((void)(__atomic_add_return( -1,(v)))) -#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v))) -#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v))) +#define atomic_add_return(i,v) (__atomic_add_return( (i),(v))) +#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v))) #define atomic_inc_return(v) (__atomic_add_return( 1,(v))) #define atomic_dec_return(v) (__atomic_add_return( -1,(v))) @@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) -#endif /* CONFIG_64BIT */ +#else /* CONFIG_64BIT */ + +#include + +#endif /* !CONFIG_64BIT */ #include diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h index 31ad0f05af3d4dec0a66bba5d02a118f748d5896..f7a18f96870347172594335092840aa10a060683 100644 --- a/arch/parisc/include/asm/dma.h +++ b/arch/parisc/include/asm/dma.h @@ -1,5 +1,4 @@ -/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. +/* asm/dma.h: Defines for using and allocating dma channels. * Written by Hennus Bergman, 1992. * High DMA channel support & info by Hannu Savolainen * and John Boyd, Nov. 1992. diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h new file mode 100644 index 0000000000000000000000000000000000000000..dc9e829f7013992d89d4014aa6ede2577b7c3f2d --- /dev/null +++ b/arch/parisc/include/asm/perf_counter.h @@ -0,0 +1,7 @@ +#ifndef __ASM_PARISC_PERF_COUNTER_H +#define __ASM_PARISC_PERF_COUNTER_H + +/* parisc only supports software counters through this interface. */ +static inline void set_perf_counter_pending(void) { } + +#endif /* __ASM_PARISC_PERF_COUNTER_H */ diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 9d64df8754ba5203c9a7299038ab5c01ea68185b..9ce66e9d1c2b845275c41aaaf290a5fb5e123ba1 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -18,6 +18,7 @@ #include #include #include + #endif /* __ASSEMBLY__ */ #define KERNEL_STACK_SIZE (4*PAGE_SIZE) @@ -127,6 +128,8 @@ struct thread_struct { unsigned long flags; }; +#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs)) + /* Thread struct flags. */ #define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */ #define PARISC_UAC_SIGBUS (1UL << 1) diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h index ee80c920b464e549848664794ac742a9e4714fd9..d91357bca5b4cc18a3c143f948f24c7afef379cc 100644 --- a/arch/parisc/include/asm/system.h +++ b/arch/parisc/include/asm/system.h @@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val) /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ #define __ldcw(a) ({ \ unsigned __ret; \ - __asm__ __volatile__(__LDCW " 0(%1),%0" \ - : "=r" (__ret) : "r" (a)); \ + __asm__ __volatile__(__LDCW " 0(%2),%0" \ + : "=r" (__ret), "+m" (*(a)) : "r" (a)); \ __ret; \ }) diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 0407959da489d54a72b4ccab371cc21e996e79a3..4ce0edfbe9694dc4daaed2253a625e9d46a25c72 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -23,7 +23,7 @@ struct thread_info { .flags = 0, \ .cpu = 0, \ .addr_limit = KERNEL_DS, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall \ } \ diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index 1f6fd4fc05b91b518f4f574b3ada13ddd24b285a..8f1a8100bf2df394f0ca78e90dbec9f33d33125d 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -12,14 +12,12 @@ * N class systems, only one PxTLB inter processor broadcast can be * active at any one time on the Merced bus. This tlb purge * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. We also need to have - * preemption disabled on uniprocessor machines, and spin_lock does that - * nicely. + * it on all systems not just the N class. */ extern spinlock_t pa_tlb_lock; -#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) -#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) +#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags) +#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags) extern void flush_tlb_all(void); extern void flush_tlb_all_local(void *); @@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { + unsigned long flags; + /* For one page, it's not worth testing the split_tlb variable */ mb(); mtsp(vma->vm_mm->context,1); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb(addr); pitlb(addr); - purge_tlb_end(); + purge_tlb_end(flags); } void __flush_tlb_range(unsigned long sid, diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index ef26b009dc5da1f323a7fc77d329e6c520b5e40f..f3d3b8b012c494e9783511da12c37277c4d7c920 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -807,8 +807,12 @@ #define __NR_dup3 (__NR_Linux + 312) #define __NR_pipe2 (__NR_Linux + 313) #define __NR_inotify_init1 (__NR_Linux + 314) +#define __NR_preadv (__NR_Linux + 315) +#define __NR_pwritev (__NR_Linux + 316) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) +#define __NR_perf_counter_open (__NR_Linux + 318) -#define __NR_Linux_syscalls (__NR_inotify_init1 + 1) +#define __NR_Linux_syscalls (__NR_perf_counter_open + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 837530ea32e783e6671ce2793bf08f30424b6808..b6ed34de14e15899cbcfccdbfa25cd80649282a6 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -1,5 +1,4 @@ -/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm); void clear_user_page_asm(void *page, unsigned long vaddr) { + unsigned long flags; /* This function is implemented in assembly in pacache.S */ extern void __clear_user_page_asm(void *page, unsigned long vaddr); - purge_tlb_start(); + purge_tlb_start(flags); __clear_user_page_asm(page, vaddr); - purge_tlb_end(); + purge_tlb_end(flags); } #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */ @@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { + unsigned long flags; + purge_kernel_dcache_page((unsigned long)page); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(page); - purge_tlb_end(); + purge_tlb_end(flags); clear_user_page_asm(page, vaddr); } EXPORT_SYMBOL(clear_user_page); void flush_kernel_dcache_page_addr(void *addr) { + unsigned long flags; + flush_kernel_dcache_page_asm(addr); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(addr); - purge_tlb_end(); + purge_tlb_end(flags); } EXPORT_SYMBOL(flush_kernel_dcache_page_addr); @@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { + unsigned long flags; + mtsp(sid, 1); - purge_tlb_start(); + purge_tlb_start(flags); if (split_tlb) { while (npages--) { pdtlb(start); @@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, start += PAGE_SIZE; } } - purge_tlb_end(); + purge_tlb_end(flags); } } diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index bd1f7f1ff74e7b6589c4a97f6fcebd28453a1d19..d228d823787991f138cea6651bbb6787701b7db5 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void) static int __init pat_query_module(ulong pcell_loc, ulong mod_index) { - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; unsigned long bytecnt; unsigned long temp; /* 64-bit scratch value */ long status; /* PDC return value status */ struct parisc_device *dev; + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + /* return cell module (PA or Processor view) */ status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, - PA_VIEW, &pa_pdc_cell); + PA_VIEW, pa_pdc_cell); if (status != PDC_OK) { /* no more cell modules or error */ return status; } - temp = pa_pdc_cell.cba; - dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); + temp = pa_pdc_cell->cba; + dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path)); if (!dev) { return PDC_OK; } @@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index) /* save generic info returned from the call */ /* REVISIT: who is the consumer of this? not sure yet... */ - dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */ - dev->pmod_loc = pa_pdc_cell.mod_location; + dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */ + dev->pmod_loc = pa_pdc_cell->mod_location; register_parisc_device(dev); /* advertise device */ @@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index) case PAT_ENTITY_PROC: printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", - pa_pdc_cell.mod[0]); + pa_pdc_cell->mod[0]); break; case PAT_ENTITY_MEM: printk(KERN_DEBUG "PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n", - pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], - pa_pdc_cell.mod[2]); + pa_pdc_cell->mod[0], pa_pdc_cell->mod[1], + pa_pdc_cell->mod[2]); break; case PAT_ENTITY_CA: printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); @@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index) print_ranges: pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, IO_VIEW, &io_pdc_cell); - printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]); - for (i = 0; i < pa_pdc_cell.mod[1]; i++) { + printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]); + for (i = 0; i < pa_pdc_cell->mod[1]; i++) { printk(KERN_DEBUG " PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, pa_pdc_cell.mod[2 + i * 3], /* type */ - pa_pdc_cell.mod[3 + i * 3], /* start */ - pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, pa_pdc_cell->mod[2 + i * 3], /* type */ + pa_pdc_cell->mod[3 + i * 3], /* start */ + pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ printk(KERN_DEBUG " IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, io_pdc_cell.mod[2 + i * 3], /* type */ - io_pdc_cell.mod[3 + i * 3], /* start */ - io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, io_pdc_cell->mod[2 + i * 3], /* type */ + io_pdc_cell->mod[3 + i * 3], /* start */ + io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ } printk(KERN_DEBUG "\n"); break; } #endif /* DEBUG_PAT */ + + kfree(pa_pdc_cell); + return PDC_OK; } diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 8007f1e6572986559789a2520603a77336c72214..330f536a9324798afda4580d152c09eb3b04c141 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(&irq_desc[irq].affinity); + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_dest < 0) return -1; - cpumask_copy(&irq_desc[irq].affinity, dest); + cpumask_copy(irq_desc[irq].affinity, dest); return 0; } #endif -static struct hw_interrupt_type cpu_interrupt_type = { +static struct irq_chip cpu_interrupt_type = { .typename = "CPU", .startup = cpu_startup_irq, .shutdown = cpu_disable_irq, @@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, &irq_desc[irq].affinity); + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 7d927eac932b9ccf598bc710bba8e965b2bcd539..c07f618ff7da9264fc9aa242cfaf1515b72d8af5 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; + if (!pte_none(*pte)) printk(KERN_ERR "map_pte_uncached: page already exists\n"); set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC)); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; (*paddr_ptr) += PAGE_SIZE; @@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; pte_t page = *pte; + pte_clear(&init_mm, vaddr, pte); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; pte++; diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6936386c9861a3721aba9a857158e8cc9133743e..f7064abc3bb6e60a544e3bfb97c12f468768fd89 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -1,5 +1,4 @@ -/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 61c07078c072d69c60769e4273339c3ac8fe8d62..1f3aa8db02030a1509253b6d0d51d4910f522761 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -156,7 +156,7 @@ void machine_power_off(void) * software. The user has to press the button himself. */ printk(KERN_EMERG "System shut down completed.\n" - KERN_EMERG "Please power this system off now."); + "Please power this system off now."); } void (*pm_power_off)(void) = machine_power_off; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index e09d0f7fb6b047ad2c2cf34d95046f89f2263874..c8fb61ed32f4eeee5bb27b648468e10da0962034 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -1,5 +1,4 @@ -/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds @@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev) if (is_pdc_pat()) { ulong status; unsigned long bytecnt; - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; #undef USE_PAT_CPUID #ifdef USE_PAT_CPUID struct pdc_pat_cpu_num cpu_info; #endif + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc, - dev->mod_index, PA_VIEW, &pa_pdc_cell); + dev->mod_index, PA_VIEW, pa_pdc_cell); BUG_ON(PDC_OK != status); /* verify it's the same as what do_pat_inventory() found */ - BUG_ON(dev->mod_info != pa_pdc_cell.mod_info); - BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location); + BUG_ON(dev->mod_info != pa_pdc_cell->mod_info); + BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location); + + txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */ - txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */ + kfree(pa_pdc_cell); #ifdef USE_PAT_CPUID /* We need contiguous numbers for cpuid. Firmware's notion diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 82131ca8e05c28790bbc133690e2267f1be67034..cb71f3dac99525a525027fa2f532a20e4c3caa93 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 1adb40c8166965ae1c397abe272187a42639fcf6..92a0acaa0d1213042bd871e83a2024cc1ae59aa6 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid, return ret; } -/*** copied from mips64 ***/ -/* - * Ooo, nasty. We need here to frob 32-bit unsigned longs to - * 64-bit unsigned longs. - */ - -static inline int -get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - if (ufdset) { - unsigned long odd; - - if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32))) - return -EFAULT; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - __get_user(l, ufdset); - __get_user(h, ufdset+1); - ufdset += 2; - *fdset++ = h << 32 | l; - n -= 2; - } - if (odd) - __get_user(*fdset, ufdset); - } else { - /* Tricky, must clear full unsigned long in the - * kernel fdset at the end, this makes sure that - * actually happens. - */ - memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32)); - } - return 0; -} - -static inline void -set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - unsigned long odd; - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - - if (!ufdset) - return; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - l = *fdset++; - h = l >> 32; - __put_user(l, ufdset); - __put_user(h, ufdset+1); - ufdset += 2; - n -= 2; - } - if (odd) - __put_user(*fdset, ufdset); -} - struct msgbuf32 { int mtype; char mtext[1]; diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 03b9a01bc16cf49340db4d69329a08338e47650f..cf145eb026b34f9049075b2c6bf348ebef2ceb43 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -413,6 +413,10 @@ ENTRY_SAME(dup3) ENTRY_SAME(pipe2) ENTRY_SAME(inotify_init1) + ENTRY_COMP(preadv) /* 315 */ + ENTRY_COMP(pwritev) + ENTRY_COMP(rt_tgsigqueueinfo) + ENTRY_SAME(perf_counter_open) /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index d4dd05674c6234b495acdb25431bb5fd9a437261..a79c6f9e7e2c441f0d2d7feda117ae14c72ad065 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly; /* timer cycles per tick */ */ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) { - unsigned long now; + unsigned long now, now2; unsigned long next_tick; - unsigned long cycles_elapsed, ticks_elapsed; + unsigned long cycles_elapsed, ticks_elapsed = 1; unsigned long cycles_remainder; unsigned int cpu = smp_processor_id(); struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu); @@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) /* Initialize next_tick to the expected tick time. */ next_tick = cpuinfo->it_value; - /* Get current interval timer. - * CR16 reads as 64 bits in CPU wide mode. - * CR16 reads as 32 bits in CPU narrow mode. - */ + /* Get current cycle counter (Control Register 16). */ now = mfctl(16); cycles_elapsed = now - next_tick; - if ((cycles_elapsed >> 5) < cpt) { + if ((cycles_elapsed >> 6) < cpt) { /* use "cheap" math (add/subtract) instead * of the more expensive div/mul method */ cycles_remainder = cycles_elapsed; - ticks_elapsed = 1; while (cycles_remainder > cpt) { cycles_remainder -= cpt; ticks_elapsed++; } } else { + /* TODO: Reduce this to one fdiv op */ cycles_remainder = cycles_elapsed % cpt; - ticks_elapsed = 1 + cycles_elapsed / cpt; - } - - /* Can we differentiate between "early CR16" (aka Scenario 1) and - * "long delay" (aka Scenario 3)? I don't think so. - * - * We expected timer_interrupt to be delivered at least a few hundred - * cycles after the IT fires. But it's arbitrary how much time passes - * before we call it "late". I've picked one second. - */ - if (unlikely(ticks_elapsed > HZ)) { - /* Scenario 3: very long delay? bad in any case */ - printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" - " cycles %lX rem %lX " - " next/now %lX/%lX\n", - cpu, - cycles_elapsed, cycles_remainder, - next_tick, now ); + ticks_elapsed += cycles_elapsed / cpt; } /* convert from "division remainder" to "remainder of clock tick" */ @@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) cpuinfo->it_value = next_tick; - /* Skip one clocktick on purpose if we are likely to miss next_tick. - * We want to avoid the new next_tick being less than CR16. - * If that happened, itimer wouldn't fire until CR16 wrapped. - * We'll catch the tick we missed on the tick after that. + /* Program the IT when to deliver the next interrupt. + * Only bottom 32-bits of next_tick are writable in CR16! */ - if (!(cycles_remainder >> 13)) - next_tick += cpt; - - /* Program the IT when to deliver the next interrupt. */ - /* Only bottom 32-bits of next_tick are written to cr16. */ mtctl(next_tick, 16); + /* Skip one clocktick on purpose if we missed next_tick. + * The new CR16 must be "later" than current CR16 otherwise + * itimer would not fire until CR16 wrapped - e.g 4 seconds + * later on a 1Ghz processor. We'll account for the missed + * tick on the next timer interrupt. + * + * "next_tick - now" will always give the difference regardless + * if one or the other wrapped. If "now" is "bigger" we'll end up + * with a very large unsigned number. + */ + now2 = mfctl(16); + if (next_tick - now2 > cpt) + mtctl(next_tick+cpt, 16); + +#if 1 +/* + * GGG: DEBUG code for how many cycles programming CR16 used. + */ + if (unlikely(now2 - now > 0x3000)) /* 12K cycles */ + printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!" + " cyc %lX rem %lX " + " next/now %lX/%lX\n", + cpu, now2 - now, cycles_elapsed, cycles_remainder, + next_tick, now ); +#endif + + /* Can we differentiate between "early CR16" (aka Scenario 1) and + * "long delay" (aka Scenario 3)? I don't think so. + * + * Timer_interrupt will be delivered at least a few hundred cycles + * after the IT fires. But it's arbitrary how much time passes + * before we call it "late". I've picked one second. + * + * It's important NO printk's are between reading CR16 and + * setting up the next value. May introduce huge variance. + */ + if (unlikely(ticks_elapsed > HZ)) { + /* Scenario 3: very long delay? bad in any case */ + printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" + " cycles %lX rem %lX " + " next/now %lX/%lX\n", + cpu, + cycles_elapsed, cycles_remainder, + next_tick, now ); + } /* Done mucking with unreliable delivery of interrupts. * Go do system house keeping. @@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc); /* clock source code */ -static cycle_t read_cr16(void) +static cycle_t read_cr16(struct clocksource *cs) { return get_cycles(); } diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index c32f5d6d778ec7bd10c028cf40db645af659686a..528f0ff9b2738314ab61871379b0d8c980c4b530 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err) oops_enter(); /* Amuse the user in a SPARC fashion */ - if (err) printk( -KERN_CRIT " _______________________________ \n" -KERN_CRIT " < Your System ate a SPARC! Gah! >\n" -KERN_CRIT " ------------------------------- \n" -KERN_CRIT " \\ ^__^\n" -KERN_CRIT " \\ (xx)\\_______\n" -KERN_CRIT " (__)\\ )\\/\\\n" -KERN_CRIT " U ||----w |\n" -KERN_CRIT " || ||\n"); + if (err) printk(KERN_CRIT + " _______________________________ \n" + " < Your System ate a SPARC! Gah! >\n" + " ------------------------------- \n" + " \\ ^__^\n" + " (__)\\ )\\/\\\n" + " U ||----w |\n" + " || ||\n"); /* unlock the pdc lock if necessary */ pdc_emergency_unlock(); @@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs) else printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ", code); - printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm); + printk(KERN_CONT "pid=%d command='%s'\n", + task_pid_nr(current), current->comm); show_regs(regs); #endif si.si_signo = SIGSEGV; diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c index 462696d30d3bd601b366afcd4e0d0048a61050f3..ae66d31f9ecf7d713d3c995a23330980d361c067 100644 --- a/arch/parisc/lib/checksum.c +++ b/arch/parisc/lib/checksum.c @@ -13,8 +13,6 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $ */ #include #include diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index bbda909c866e57c1327b6ccd47cf9bab8dc992d4..abf41f4632a9fca1b8df2c4ba963c2e328e553e7 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -405,7 +405,7 @@ byte_copy: unaligned_copy: /* possibly we are aligned on a word, but not on a double... */ - if (likely(t1 & (sizeof(unsigned int)-1)) == 0) { + if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) { t2 = src & (sizeof(unsigned int) - 1); if (unlikely(t2 != 0)) { diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c index 66c8a9f6a27eba49f17798873e97419a6104c282..3ca1c61492182d3321c2fe7d2cf00d003ff5a8a5 100644 --- a/arch/parisc/math-emu/decode_exc.c +++ b/arch/parisc/math-emu/decode_exc.c @@ -40,7 +40,7 @@ * END_DESC */ - +#include #include "float.h" #include "sgl_float.h" #include "dbl_float.h" diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index bfb6dd6ab380c3a2b762575d28e36008900658f4..c6afbfc957703f800610a96f0caa8008f53e598e 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -1,5 +1,4 @@ -/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 4356ceb1e366d9ed010706ac21dceb8ac24ba151..b0831d9e35cba677d153af1ac7efd0583fc618aa 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -370,34 +370,22 @@ static void __init setup_bootmem(void) void free_initmem(void) { - unsigned long addr, init_begin, init_end; - - printk(KERN_INFO "Freeing unused kernel memory: "); + unsigned long addr; + unsigned long init_begin = (unsigned long)__init_begin; + unsigned long init_end = (unsigned long)__init_end; #ifdef CONFIG_DEBUG_KERNEL /* Attempt to catch anyone trying to execute code here * by filling the page with BRK insns. - * - * If we disable interrupts for all CPUs, then IPI stops working. - * Kinda breaks the global cache flushing. */ - local_irq_disable(); - - memset(__init_begin, 0x00, - (unsigned long)__init_end - (unsigned long)__init_begin); - - flush_data_cache(); - asm volatile("sync" : : ); - flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end); - asm volatile("sync" : : ); - - local_irq_enable(); + memset((void *)init_begin, 0x00, init_end - init_begin); + flush_icache_range(init_begin, init_end); #endif /* align __init_begin and __init_end to page size, ignoring linker script where we might have tried to save RAM */ - init_begin = PAGE_ALIGN((unsigned long)(__init_begin)); - init_end = PAGE_ALIGN((unsigned long)(__init_end)); + init_begin = PAGE_ALIGN(init_begin); + init_end = PAGE_ALIGN(init_end); for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); @@ -409,7 +397,8 @@ void free_initmem(void) /* set up a new led state on systems shipped LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); - printk("%luk freed\n", (init_end - init_begin) >> 10); + printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n", + (init_end - init_begin) >> 10); } diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 01bfb56bbe802a96d2c4a965df1651483d5d8ae6..31605ee4afb69444d9aa5f8c523f9eba9c5f5879 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -261,10 +261,11 @@ compatible = "gpio-leds"; green { gpios = <&GPIO1 0 0>; - default-state = "on"; + default-state = "keep"; }; red { gpios = <&GPIO1 1 0>; + default-state = "keep"; }; }; diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 3b77f092abe12d4ef3c234d0e62a1985ce498a74..787635f23d8fd0ca3772416c4240055754c3680f 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 07:57:16 2009 +# Linux kernel version: 2.6.30 +# Tue Jun 9 23:35:36 2009 # # CONFIG_PPC64 is not set @@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y @@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,10 +125,13 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,10 +186,11 @@ CONFIG_WARP=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set -# CONFIG_PPC4xx_GPIO is not set +CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # CONFIG_HAS_RAPIDIO is not set # @@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_XILINX_SYSACE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SCSI_WAIT_SCAN is not set # # SCSI Transports @@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_IBM_NEW_EMAC=y CONFIG_IBM_NEW_EMAC_RXB=128 CONFIG_IBM_NEW_EMAC_TXB=64 @@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +CONFIG_MMC_PIKASD=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_GPIO_PLATFORM is not set +CONFIG_LEDS_GPIO_OF=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers # -# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -992,6 +1077,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1130,16 +1227,19 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 @@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set -CONFIG_BDI_SWITCH=y +# CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h index 1e2eb41fa0577ff8ecceb2d9711220c82ea22fab..52e4d54da2a9845d16db0773ca81310178707723 100644 --- a/arch/powerpc/include/asm/delay.h +++ b/arch/powerpc/include/asm/delay.h @@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs); udelay(delay); \ else \ cpu_relax(); \ + if (!__ret) \ + __ret = (condition); \ __ret; \ }) diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index 8ccd4e155768fa749edf3f65fbc0c5a951ef9819..0ea0639fcf75be1c4393e4437aceaf7bb7ca87eb 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -61,6 +61,8 @@ struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +#define PERF_COUNTER_INDEX_OFFSET 1 + /* * Only override the default definitions in include/linux/perf_counter.h * if we have hardware PMU support. diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 9aba5a38a7c4f32a011c6af5c3bd22e28e88d8a6..c8b329255678802bc34e27c85e84bf5338be25ea 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -46,15 +46,13 @@ struct thread_info { /* * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. */ #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ .exec_domain = &default_exec_domain, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index 75ff47fed7bfcadf9d69028297b09796c9e8a342..c244133c67a67bcdd1591b9049f7487e78974b22 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -10,7 +10,6 @@ */ #include #include -#include #include #include diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 5d755ef7ac8f21d97fbe5ef347b38c44a0f17e23..5a9f5cbd40a48e9c19c4afaae64e86a57fd5c18d 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = { .get_constraint = power7_get_constraint, .get_alternatives = power7_get_alternatives, .disable_pmc = power7_disable_pmc, + .flags = PPMU_ALT_SIPR, .n_generic = ARRAY_SIZE(power7_generic_events), .generic_events = power7_generic_events, .cache_events = &power7_cache_events, diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 6637c87fe70eb27812578d9c7d2f51a904f6f1b8..833097ac45dc4aad00e7e3e8d43b060efccada77 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -10,7 +10,6 @@ */ #include #include -#include #include #include diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 297632cba047e5ee980950059bee841217978631..8a6daf4129f67ffb143e762a3972a1419b30d0bd 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c index bc400c78c97fb4030b28cbd6c7b4794bba70b199..bc122a120bf009c7b6457e56936d5e9f47071dd6 100644 --- a/arch/powerpc/mm/gup.c +++ b/arch/powerpc/mm/gup.c @@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, int psize; #endif - pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); start &= PAGE_MASK; addr = start; @@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, start, len))) goto slow_irqon; - pr_debug(" aligned: %lx .. %lx\n", start, end); + pr_devel(" aligned: %lx .. %lx\n", start, end); #ifdef CONFIG_HUGETLB_PAGE /* We bail out on slice boundary crossing when hugetlb is @@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, do { VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); ptep = huge_pte_offset(mm, a); - pr_debug(" %016lx: huge ptep %p\n", a, ptep); + pr_devel(" %016lx: huge ptep %p\n", a, ptep); if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, &nr)) goto slow; @@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, #ifdef CONFIG_PPC64 VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); #endif - pr_debug(" %016lx: normal pgd %p\n", addr, + pr_devel(" %016lx: normal pgd %p\n", addr, (void *)pgd_val(pgd)); next = pgd_addr_end(addr, end); if (pgd_none(pgd)) @@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, slow: local_irq_enable(); slow_irqon: - pr_debug(" slow path ! nr = %d\n", nr); + pr_devel(" slow path ! nr = %d\n", nr); /* Try to get the remaining pages with get_user_pages */ start += nr << PAGE_SHIFT; diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 8343986809c03fe2b3e952e411ec31a611fffe8b..92a197117d5b8012f57f83bb5d8fd56dcc055799 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id) id = first_context; continue; } - pr_debug("[%d] steal context %d from mm @%p\n", + pr_devel("[%d] steal context %d from mm @%p\n", smp_processor_id(), id, mm); /* Mark this mm has having no context anymore */ @@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id) /* Pick up the victim mm */ mm = context_mm[id]; - pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); + pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm); /* Flush the TLB for that context */ local_flush_tlb_mm(mm); @@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) spin_lock(&context_lock); #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n", + pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n", cpu, next, next->context.active, next->context.id); #endif @@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.active++; if (prev) { #ifndef DEBUG_STEAL_ONLY - pr_debug(" old context %p active was: %d\n", + pr_devel(" old context %p active was: %d\n", prev, prev->context.active); #endif WARN_ON(prev->context.active < 1); @@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.id = id; #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] picked up new id %d, nrf is now %d\n", + pr_devel("[%d] picked up new id %d, nrf is now %d\n", cpu, id, nr_free_contexts); #endif @@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) * local TLB for it and unmark it before we use it */ if (test_bit(id, stale_map[cpu])) { - pr_debug("[%d] flushing stale context %d for mm @%p !\n", + pr_devel("[%d] flushing stale context %d for mm @%p !\n", cpu, id, next); local_flush_tlb_mm(next); @@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu); + pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu); stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: - pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu); + pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu); kfree(stale_map[cpu]); stale_map[cpu] = NULL; break; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ae1d67cc090cfcdb4fd8cfd9ae390cf24c123a32..627767d6169bd4e4300528f4c37907693beea6a7 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte) page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_debug("do_dcache_icache_coherency... flushing\n"); + pr_devel("do_dcache_icache_coherency... flushing\n"); flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } else - pr_debug("do_dcache_icache_coherency... already clean\n"); + pr_devel("do_dcache_icache_coherency... already clean\n"); return __pte(pte_val(pte) | _PAGE_HWEXEC); } diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 3b52c80e5e33866141630e1e4ddbe587f7dd519d..5b7038f248b60ea5b7b7d1e0f432a5dad5fa285e 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -14,8 +14,6 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG - #include #include #include @@ -27,11 +25,6 @@ #include #include -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG pr_debug -#endif extern void slb_allocate_realmode(unsigned long ea); extern void slb_allocate_user(unsigned long ea); @@ -285,13 +278,13 @@ void slb_initialize(void) patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); - DBG("SLB: linear LLP = %04lx\n", linear_llp); - DBG("SLB: io LLP = %04lx\n", io_llp); + pr_devel("SLB: linear LLP = %04lx\n", linear_llp); + pr_devel("SLB: io LLP = %04lx\n", io_llp); #ifdef CONFIG_SPARSEMEM_VMEMMAP patch_slb_encoding(slb_miss_kernel_load_vmemmap, SLB_VSID_KERNEL | vmemmap_llp); - DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); + pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); #endif } diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 1be1b5e597962727bf41607684d6767b98548238..937eb90677d9ef658b4a2e7d9ebd982a9e0820f7 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, */ if (huge) { #ifdef CONFIG_HUGETLB_PAGE - psize = get_slice_psize(mm, addr);; + psize = get_slice_psize(mm, addr); #else BUG(); psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 258fa4411e9e48dde2c9bfdffce352c49e3d9a21..c591339daf58aff5f5b721bc883baeea8928e44e 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, goto fail; if (shdr_str.sh_type != SHT_STRTAB) - goto fail;; + goto fail; for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { if (copy_from_user(&sym, spu_elf_start + diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 0362c88f47d721d2d99d1cc3fc6bfdadec5e1147..e5c1b096c3e124186d9a4a4ae5c3f1cac8b06d06 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -64,8 +64,6 @@ define_machine(warp) { }; -static u32 post_info; - static int __init warp_post_info(void) { struct device_node *np; @@ -87,10 +85,9 @@ static int __init warp_post_info(void) iounmap(fpga); - if (post1 || post2) { + if (post1 || post2) printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); - post_info = 1; - } else + else printk(KERN_INFO "Warp POST OK\n"); return 0; @@ -166,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context) value ^= 1; mdelay(500); } + + /* Not reached */ + return IRQ_HANDLED; } static int pika_setup_leds(void) @@ -179,15 +179,10 @@ static int pika_setup_leds(void) } for_each_child_of_node(np, child) - if (strcmp(child->name, "green") == 0) { + if (strcmp(child->name, "green") == 0) green_led = of_get_gpio(child, 0); - /* Turn back on the green LED */ - gpio_set_value(green_led, 1); - } else if (strcmp(child->name, "red") == 0) { + else if (strcmp(child->name, "red") == 0) red_led = of_get_gpio(child, 0); - /* Set based on post */ - gpio_set_value(red_led, post_info); - } of_node_put(np); diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index ddf0bdc0fc8ba1a6845fb283a5330d21ab0701ce..7ee979f323d18c2da64e8597973bba0823ed1e8b 100644 --- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void) goto out; } - priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic)); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { of_node_put(np); ret = -ENOMEM; diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index c71498dbf211780675293c205d258cd17350f987..aca5741ddc6777663dcc55c9a840d963b83128f7 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn, static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val) { - pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); + pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); dcr_write(msic->dcr_host, dcr_n, val); } @@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) int retry = 0; write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG); - pr_debug("axon_msi: original write_offset 0x%x\n", write_offset); + pr_devel("axon_msi: original write_offset 0x%x\n", write_offset); /* write_offset doesn't wrap properly, so we have to mask it */ write_offset &= MSIC_FIFO_SIZE_MASK; @@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) msi = le32_to_cpu(msic->fifo_virt[idx]); msi &= 0xFFFF; - pr_debug("axon_msi: woff %x roff %x msi %x\n", + pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) { @@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) */ udelay(1); retry++; - pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + pr_devel("axon_msi: invalid irq 0x%x!\n", msi); continue; } if (retry) { - pr_debug("axon_msi: late irq 0x%x, retry %d\n", + pr_devel("axon_msi: late irq 0x%x, retry %d\n", msi, retry); retry = 0; } @@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device) struct axon_msic *msic = dev_get_drvdata(&device->dev); u32 tmp; - pr_debug("axon_msi: disabling %s\n", + pr_devel("axon_msi: disabling %s\n", msic->irq_host->of_node->full_name); tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG); tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE; @@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device, unsigned int virq; int dcr_base, dcr_len; - pr_debug("axon_msi: setting up dn %s\n", dn->full_name); + pr_devel("axon_msi: setting up dn %s\n", dn->full_name); msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL); if (!msic) { @@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device, set_irq_data(virq, msic); set_irq_chained_handler(virq, axon_msi_cascade); - pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq); + pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq); /* Enable the MSIC hardware */ msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32); @@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) addr = of_translate_address(dn, of_get_property(dn, "reg", NULL)); if (addr == OF_BAD_ADDR) { - pr_debug("axon_msi: couldn't translate reg property\n"); + pr_devel("axon_msi: couldn't translate reg property\n"); return; } msic->trigger = ioremap(addr, 0x4); if (!msic->trigger) { - pr_debug("axon_msi: ioremap failed\n"); + pr_devel("axon_msi: ioremap failed\n"); return; } @@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) if (!debugfs_create_file(name, 0600, powerpc_debugfs_root, msic, &fops_msic)) { - pr_debug("axon_msi: debugfs_create_file failed!\n"); + pr_devel("axon_msi: debugfs_create_file failed!\n"); return; } } diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 22ecfbe7183dec52e8f907a4ef9a8b23fdfe6a71..708c751333770b216009d1d4d112a0b0a74c08d1 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode) static struct pmf_function *pfunc_cpu_setfreq_high; static struct pmf_function *pfunc_cpu_setfreq_low; static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done;; +static struct pmf_function *pfunc_slewing_done; static int g5_pfunc_switch_freq(int speed_mode) { diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index dce736349107b3b7aa427956a610250c43709458..d212006a5b3c0d4ca5213acdf1d02e0939add083 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void) np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; - viaint = irq_of_parse_and_map(np, 0);; + viaint = irq_of_parse_and_map(np, 0); not_found: #endif /* CONFIG_ADB_PMU */ diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 9fead0faf38bbd5930fe0dd0f75fcc1f2711c296..3f763c5284acc2e682f0f9a3832159565bf3598b 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r) int result; dump_mmio_region(r); -; result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id, r->lpar_addr); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index e3139fa5e556e78ddcdeacc4e4850b7aeeba6ed4..903eb9eec687471628c37e30026ae6aad5c35548 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long hpte_v, hpte_r; if (!(vflags & HPTE_V_BOLTED)) - pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " "rflags=%lx, vflags=%lx, psize=%d)\n", hpte_group, va, pa, rflags, vflags, psize); @@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, hpte_r = hpte_encode_r(pa, psize) | rflags; if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); if (unlikely(lpar_rc == H_PTEG_FULL)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" full\n"); + pr_devel(" full\n"); return -1; } @@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, */ if (unlikely(lpar_rc != H_SUCCESS)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" lpar err %lu\n", lpar_rc); + pr_devel(" lpar err %lu\n", lpar_rc); return -2; } if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" -> slot: %lu\n", slot & 7); + pr_devel(" -> slot: %lu\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well @@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot, want_v = hpte_encode_avpn(va, psize, ssize); - pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", + pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", want_v, slot, flags, psize); lpar_rc = plpar_pte_protect(flags, slot, want_v); if (lpar_rc == H_NOT_FOUND) { - pr_debug("not found !\n"); + pr_devel("not found !\n"); return -1; } - pr_debug("ok\n"); + pr_devel("ok\n"); BUG_ON(lpar_rc != H_SUCCESS); @@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, unsigned long lpar_rc; unsigned long dummy1, dummy2; - pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", + pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", slot, va, psize, local); want_v = hpte_encode_avpn(va, psize, ssize); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index be3581a8c294c8de4d083b1b2c5710381a35c2d9..419f8a637ffe5b73db8c69080e118c2fdab00444 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq) int call_status; int server; - pr_debug("xics: unmask virq %d\n", virq); + pr_devel("xics: unmask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; - pr_debug(" -> map to hwirq 0x%x\n", irq); + pr_devel(" -> map to hwirq 0x%x\n", irq); if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) return; @@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq) { unsigned int irq; - pr_debug("xics: mask virq %d\n", virq); + pr_devel("xics: mask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) @@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) static int xics_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw); + pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw); /* Insert the interrupt mapping into the radix tree for fast lookup */ irq_radix_revmap_insert(xics_host, virq, hw); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 39db9d1155d27466ffe176887c7d9b2c320f288f..cbb3bed75d3c0c56a218e1a2678702d6ca0bcfd7 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) break; default: str = "Unknown"; - break;; + break; } dev_info(dev, "Hardware port width: %s\n", str); diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index a86d3ce01ead98293dcb0e28a14bf943163b40a2..69e2630c90624cf40690d0ecfd7643a75e1d4bf5 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) if (ret) return NULL; - ipic = alloc_bootmem(sizeof(struct ipic)); + ipic = kzalloc(sizeof(*ipic), GFP_KERNEL); if (ipic == NULL) return NULL; - memset(ipic, 0, sizeof(struct ipic)); - ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index d46de1f0f3eed445a872ba2e98884469e5dd8468..3981ae4cb58e7f3f41fb7ffa25e9a4757bed3d6f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -508,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); /* Allocate fixups array */ - mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); + mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL); BUG_ON(mpic->fixups == NULL); - memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup)); /* Init spinlock */ spin_lock_init(&mpic->fixup_lock); @@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, psize /= 4; bits = intvec_top + 1; mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long); - mpic->protected = alloc_bootmem(mapsize); + mpic->protected = kzalloc(mapsize, GFP_KERNEL); BUG_ON(mpic->protected == NULL); - memset(mpic->protected, 0, mapsize); for (i = 0; i < psize; i++) { if (psrc[i] > intvec_top) continue; @@ -1353,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic) #ifdef CONFIG_PM /* allocate memory to save mpic state */ - mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save)); + mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data), + GFP_KERNEL); BUG_ON(mpic->save_data == NULL); #endif } diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index daefc93ddffec42eb4e15ccfb218e127ccee4032..6ff9d71b4c0d877e99aedef1fd9d3820bd424a3d 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, */ /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(ep_size));; + sa = (0xffffffffffffffffull << ilog2(ep_size)); /* Setup BAR0 */ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); @@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr)); } else { /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(size));; + sa = (0xffffffffffffffffull << ilog2(size)); if (res->flags & IORESOURCE_PREFETCH) sa |= 0x8; diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 63cdf9887f3672dd4e16310b591b91d564de20bd..074905c3ee5a94d80fb3e0daa86e88b8f77f9650 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, if (ret) return; - qe_ic = alloc_bootmem(sizeof(struct qe_ic)); + qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL); if (qe_ic == NULL) return; - memset(qe_ic, 0, sizeof(struct qe_ic)); - qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); if (qe_ic->irqhost == NULL) diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index d35405c5943482c86efea86739099ed8c2f3da1e..466ce9ace1270ec881a4ae2f18e92a70648af40b 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node) BUG_ON(! of_device_is_compatible(node, "ibm,uic")); - uic = alloc_bootmem(sizeof(*uic)); + uic = kzalloc(sizeof(*uic), GFP_KERNEL); if (! uic) return NULL; /* FIXME: panic? */ - memset(uic, 0, sizeof(*uic)); spin_lock_init(&uic->lock); indexp = of_get_property(node, "cell-index", &len); if (!indexp || (len != sizeof(u32))) { diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e577839f3073e5a6e5687193817ddcb6e354c423..2ae5d72f47edaad3198a030c0ee7ed09deeea6b8 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -95,6 +95,11 @@ config S390 select HAVE_ARCH_TRACEHOOK select INIT_ALL_POSSIBLE select HAVE_PERF_COUNTERS + select GENERIC_ATOMIC64 if !64BIT + +config SCHED_OMIT_FRAME_POINTER + bool + default y source "init/Kconfig" @@ -116,6 +121,9 @@ config 32BIT bool default y if !64BIT +config KTIME_SCALAR + def_bool 32BIT + config SMP bool "Symmetric multi-processing support" ---help--- diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index fca9dffcc669b186f779785ae8d1ac3a9858c356..c7d0abfb0f0089a9ed9b716a31928c563abc18e2 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) #undef __CSG_LOOP -#endif + +#else /* __s390x__ */ + +#include + +#endif /* __s390x__ */ #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h index a7205a3828cb1553b89bb6730263c6549f26fbb9..7015188c2cc275b5cb86ad4ee1d4e326239f9fcc 100644 --- a/arch/s390/include/asm/perf_counter.h +++ b/arch/s390/include/asm/perf_counter.h @@ -6,3 +6,5 @@ static inline void set_perf_counter_pending(void) {} static inline void clear_perf_counter_pending(void) {} + +#define PERF_COUNTER_INDEX_OFFSET 0 diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 925bcc6490354c3f2fa2c5dbbca8b37b553b1bd6..ba1cab9fc1f92cd19acfe34d2353cce8a0858c7e 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -61,7 +61,7 @@ struct thread_info { .exec_domain = &default_exec_domain, \ .flags = 0, \ .cpu = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index d2f270c995d9baefa6ac75a743c4d5d165441b57..db943a7ec51331f5f471c23f838e454eb46c99b2 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index b8bf4b140065226bbb8f48e3f4eadd07e8c04b7b..371a2d88f4ac7b6e170134b96b4924c69f8a8b99 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -70,6 +70,7 @@ struct shutdown_action { char *name; void (*fn) (struct shutdown_trigger *trigger); int (*init) (void); + int init_rc; }; static char *ipl_type_str(enum ipl_type type) @@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger, int i; for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { - if (!shutdown_actions_list[i]) - continue; if (sysfs_streq(buf, shutdown_actions_list[i]->name)) { - trigger->action = shutdown_actions_list[i]; - return len; + if (shutdown_actions_list[i]->init_rc) { + return shutdown_actions_list[i]->init_rc; + } else { + trigger->action = shutdown_actions_list[i]; + return len; + } } } return -EINVAL; @@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void) for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { if (!shutdown_actions_list[i]->init) continue; - if (shutdown_actions_list[i]->init()) - shutdown_actions_list[i] = NULL; + shutdown_actions_list[i]->init_rc = + shutdown_actions_list[i]->init(); } } diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 490b39934d65aa8a98cc76f5772b10f3ef9735ea..43acd73105b7f06f279776a9c96be780ae1927ce 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index ab6735df2d2155b2755170048701f979272e6f03..97975ec7a27471253a8da274af72d14a16e9f171 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -3,6 +3,6 @@ # lib-y += delay.o string.o uaccess_std.o uaccess_pt.o -obj-$(CONFIG_32BIT) += div64.o qrnnd.o +obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 3f5f680726ed1e03bc74cc40a4217a93ab89e837..97c1eca83cc24274e796c491f60d5851252de150 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs) cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; __ctl_load(cr0 , 0, 0); mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + lockdep_off(); trace_hardirqs_on(); __load_psw_mask(mask); local_irq_disable(); + lockdep_on(); __ctl_load(cr0_saved, 0, 0); local_tick_enable(clock_saved); set_clock_comparator(S390_lowcore.clock_comparator); diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c new file mode 100644 index 0000000000000000000000000000000000000000..3e05ff5325824393d4d9caea405d277fccbb0cd2 --- /dev/null +++ b/arch/s390/lib/ucmpdi2.c @@ -0,0 +1,26 @@ +#include + +union ull_union { + unsigned long long ull; + struct { + unsigned int high; + unsigned int low; + } ui; +}; + +int __ucmpdi2(unsigned long long a, unsigned long long b) +{ + union ull_union au = {.ull = a}; + union ull_union bu = {.ull = b}; + + if (au.ui.high < bu.ui.high) + return 0; + else if (au.ui.high > bu.ui.high) + return 2; + if (au.ui.low < bu.ui.low) + return 0; + else if (au.ui.low > bu.ui.low) + return 2; + return 1; +} +EXPORT_SYMBOL(__ucmpdi2); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 74eb26bf1970ee4f92bf3d6f34e3036471a6302d..e5e119fe03b2c18b0664c4ed48653889380aa7ac 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8ece0b5bd0282495f872bc71f0ad56227d312b12..39224b57c6efe5ae5d37a45c68d34811fbc0f047 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,10 +61,6 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 9c3a33210d61750a71a2ae55d8fc7a7c5936403d..180455642a432ce08bd639f02b06826209cd9ac5 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port) unsigned short se7206_inw(unsigned long port) { - return *port2adr(port);; + return *port2adr(port); } void se7206_outb(unsigned char value, unsigned long port) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b88930583774a29837d5aa8424518d..8fed45a2fb8550dd4cf09f3f8844269194d613cd 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -19,10 +19,13 @@ #include #include #include +#include #include