Merge "ARM: dts: msmkrypton: Add nodes for USB3 DWC3 and its HS and SS PHYs"

		/* GPIO output to mss */

		qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>;

	};

	usb3: qcom,ssusb@f9200000 {

		compatible = "qcom,dwc-usb3-msm";

		reg = <0xf9200000 0xfc000>,

				<0xfd4ab000 0x4>;

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		interrupt-parent = <&usb3>;

		interrupts = <0 1>;

		#interrupt-cells = <1>;

		interrupt-map-mask = <0x0 0xffffffff>;

		interrupt-map = <0x0 0 &intc 0 133 0

						0x0 1 &spmi_bus 0x0 0x0 0x9 0x0>;

		interrupt-names = "hs_phy_irq", "pmic_id_irq";

		USB3_GDSC-supply = <&gdsc_usb30>;

		qcom,dwc-usb3-msm-dbm-eps = <8>;

		qcom,otg-capability;

		qcom,dwc-hsphy-init = <0x00D191A4>;

		qcom,msm-bus,name = "usb3";

		qcom,msm-bus,num-cases = <2>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

						<61 512 0 0>,

						<61 512 240000 960000>;

		dwc3@f9200000 {

				compatible = "synopsys,dwc3";

				reg = <0xf9200000 0xfc000>;

				interrupt-parent = <&intc>;

				interrupts = <0 131 0>, <0 179 0>;

				interrupt-names = "irq", "otg_irq";

				usb-phy = <&hsphy0>, <&ssphy0>;

		};

        };

	android_usb@fe8050c8 {

		reg = <0xfe8050c8 0xc8>;

		compatible = "qcom,android-usb";

		qcom,android-usb-swfi-latency = <100>;

	};

	hsphy0: hsphy@f92f8800 {

		compatible = "qcom,usb-hsphy";

		reg = <0xf92f8800 0x3ff>;

		qcom,hsphy-init = <0x00D191A4>;

		vdd-supply = <&pmd9635_l3_corner>;

		vdda18-supply = <&pmd9635_l8>;

		vdda33-supply = <&pmd9635_l10>;

		qcom,vdd-voltage-level = <1 5 7>;

		qcom,ext-vbus-id;

		qcom,vbus-valid-override;

	};

	ssphy0: ssphy@f9b38000 {

		compatible = "qcom,usb-ssphy-qmp";

		reg = <0xf9b38000 0x16c>;

		vdd-supply = <&pmd9635_l4>;

		vdda18-supply = <&pmd9635_l8>;

		qcom,vdd-voltage-level = <0 900000 1050000>;

		qcom,vbus-valid-override;

	};

};

&gdsc_pcie_0 {