diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 55f12ac37acdf105f65bd3981b8e8c1e6cf720b7..490d862c5f0ddffc748ebb56de4255ef0769c115 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -199,10 +199,33 @@ may be configured as a kernel built-in or a kernel loadable module. You can only make use of kgdbwait and early debugging if you build kgdboc into the kernel as a built-in. + Optionally you can elect to activate kms (Kernel Mode + Setting) integration. When you use kms with kgdboc and you have a + video driver that has atomic mode setting hooks, it is possible to + enter the debugger on the graphics console. When the kernel + execution is resumed, the previous graphics mode will be restored. + This integration can serve as a useful tool to aid in diagnosing + crashes or doing analysis of memory with kdb while allowing the + full graphics console applications to run. + kgdboc arguments - Usage: kgdboc=[kbd][[,]serial_device][,baud] + Usage: kgdboc=[kms][[,]kbd][[,]serial_device][,baud] + The order listed above must be observed if you use any of the + optional configurations together. + + Abbreviations: + + kms = Kernel Mode Setting + kbd = Keyboard + + + You can configure kgdboc to use the keyboard, and or a serial + device depending on if you are using kdb and or kgdb, in one of the + following scenarios. The order listed above must be observed if + you use any of the optional configurations together. Using kms + + only gdb is generally not a useful combination. Using loadable module or built-in @@ -212,7 +235,7 @@ As a kernel loadable module: Use the command: modprobe kgdboc kgdboc=<tty-device>,[baud] - Here are two examples of how you might formate the kgdboc + Here are two examples of how you might format the kgdboc string. The first is for an x86 target using the first serial port. The second example is for the ARM Versatile AB using the second serial port. @@ -240,6 +263,9 @@ More examples + You can configure kgdboc to use the keyboard, and or a serial + device depending on if you are using kdb and or kgdb, in one of the + following scenarios. You can configure kgdboc to use the keyboard, and or a serial device depending on if you are using kdb and or kgdb, in one of the following scenarios. @@ -255,6 +281,12 @@ kdb with a keyboard kgdboc=kbd + kdb with kernel mode setting + kgdboc=kms,kbd + + kdb with kernel mode setting and kgdb over a serial port + kgdboc=kms,kbd,ttyS0,115200 + @@ -637,6 +669,8 @@ Task Addr Pid Parent [*] cpu State Thread Command The logic to perform safe memory reads and writes to memory while using the debugger A full implementation for software breakpoints unless overridden by the arch The API to invoke either the kdb or kgdb frontend to the debug core. + The structures and callback API for atomic kernel mode setting. + NOTE: kgdboc is where the kms callbacks are invoked. @@ -747,6 +781,8 @@ Task Addr Pid Parent [*] cpu State Thread Command kgdboc internals + + kgdboc and uarts The kgdboc driver is actually a very thin driver that relies on the underlying low level to the hardware driver having "polling hooks" @@ -754,11 +790,8 @@ Task Addr Pid Parent [*] cpu State Thread Command implementation of kgdboc it the serial_core was changed to expose a low level UART hook for doing polled mode reading and writing of a single character while in an atomic context. When kgdb makes an I/O - request to the debugger, kgdboc invokes a call back in the serial - core which in turn uses the call back in the UART driver. It is - certainly possible to extend kgdboc to work with non-UART based - consoles in the future. - + request to the debugger, kgdboc invokes a callback in the serial + core which in turn uses the callback in the UART driver. When using kgdboc with a UART, the UART driver must implement two callbacks in the struct uart_ops. Example from drivers/8250.c: #ifdef CONFIG_CONSOLE_POLL @@ -772,9 +805,68 @@ Task Addr Pid Parent [*] cpu State Thread Command that they can be called from an atomic context and have to restore the state of the UART chip on return such that the system can return to normal when the debugger detaches. You need to be very careful - with any kind of lock you consider, because failing here is most + with any kind of lock you consider, because failing here is most likely going to mean pressing the reset button. + + + kgdboc and keyboards + The kgdboc driver contains logic to configure communications + with an attached keyboard. The keyboard infrastructure is only + compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the + kernel configuration. + The core polled keyboard driver driver for PS/2 type keyboards + is in drivers/char/kdb_keyboard.c. This driver is hooked into the + debug core when kgdboc populates the callback in the array + called kdb_poll_funcs[]. The + kdb_get_kbd_char() is the top-level function which polls hardware + for single character input. + + + + kgdboc and kms + The kgdboc driver contains logic to request the graphics + display to switch to a text context when you are using + "kgdboc=kms,kbd", provided that you have a video driver which has a + frame buffer console and atomic kernel mode setting support. + + Every time the kernel + debugger is entered it calls kgdboc_pre_exp_handler() which in turn + calls con_debug_enter() in the virtual console layer. On resuming kernel + execution, the kernel debugger calls kgdboc_post_exp_handler() which + in turn calls con_debug_leave(). + Any video driver that wants to be compatible with the kernel + debugger and the atomic kms callbacks must implement the + mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations. + For the fb_debug_enter and fb_debug_leave the option exists to use + the generic drm fb helper functions or implement something custom for + the hardware. The following example shows the initialization of the + .mode_set_base_atomic operation in + drivers/gpu/drm/i915/intel_display.c: + + +static const struct drm_crtc_helper_funcs intel_helper_funcs = { +[...] + .mode_set_base_atomic = intel_pipe_set_base_atomic, +[...] +}; + + + + Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in + drivers/gpu/drm/i915/intel_fb.c: + + +static struct fb_ops intelfb_ops = { +[...] + .fb_debug_enter = drm_fb_helper_debug_enter, + .fb_debug_leave = drm_fb_helper_debug_leave, +[...] +}; + + + + diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl index 254c1d5d2e502f4cc1bc00fa2b5ec194fb23dd36..85b25275196ffab5d34e31e207b78a483128a3f1 100644 --- a/Documentation/DocBook/stylesheet.xsl +++ b/Documentation/DocBook/stylesheet.xsl @@ -6,4 +6,5 @@ 0 2 +1 diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 508b5b2b0289dd88215a26301aa633d4c45821e8..b9a83dd24732486965f41225d8184405e4766c4a 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -7,7 +7,7 @@ Notes Written on Jan 15, 2002: Last Updated May 2, 2002 September 2003: Updated I/O Scheduler portions - Nick Piggin + Nick Piggin Introduction: diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt new file mode 100644 index 0000000000000000000000000000000000000000..cd2b0283706683423afe9a95a7827e79afe020a0 --- /dev/null +++ b/Documentation/coccinelle.txt @@ -0,0 +1,258 @@ +Copyright 2010 Nicolas Palix +Copyright 2010 Julia Lawall +Copyright 2010 Gilles Muller + + + Getting Coccinelle +~~~~~~~~~~~~~~~~~~~~ + +The semantic patches included in the kernel use the 'virtual rule' +feature which was introduced in Coccinelle version 0.1.11. + +Coccinelle (>=0.2.0) is available through the package manager +of many distributions, e.g. : + + - Debian (>=squeeze) + - Fedora (>=13) + - Ubuntu (>=10.04 Lucid Lynx) + - OpenSUSE + - Arch Linux + - NetBSD + - FreeBSD + + +You can get the latest version released from the Coccinelle homepage at +http://coccinelle.lip6.fr/ + +Once you have it, run the following command: + + ./configure + make + +as a regular user, and install it with + + sudo make install + + + Using Coccinelle on the Linux kernel +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A Coccinelle-specific target is defined in the top level +Makefile. This target is named 'coccicheck' and calls the 'coccicheck' +front-end in the 'scripts' directory. + +Four modes are defined: report, patch, context, and org. The mode to +use is specified by setting the MODE variable with 'MODE='. + +'report' generates a list in the following format: + file:line:column-column: message + +'patch' proposes a fix, when possible. + +'context' highlights lines of interest and their context in a +diff-like style.Lines of interest are indicated with '-'. + +'org' generates a report in the Org mode format of Emacs. + +Note that not all semantic patches implement all modes. + +To make a report for every semantic patch, run the following command: + + make coccicheck MODE=report + +NB: The 'report' mode is the default one. + +To produce patches, run: + + make coccicheck MODE=patch + + +The coccicheck target applies every semantic patch available in the +subdirectories of 'scripts/coccinelle' to the entire Linux kernel. + +For each semantic patch, a changelog message is proposed. It gives a +description of the problem being checked by the semantic patch, and +includes a reference to Coccinelle. + +As any static code analyzer, Coccinelle produces false +positives. Thus, reports must be carefully checked, and patches +reviewed. + + + Using Coccinelle with a single semantic patch +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The optional make variable COCCI can be used to check a single +semantic patch. In that case, the variable must be initialized with +the name of the semantic patch to apply. + +For instance: + + make coccicheck COCCI= MODE=patch +or + make coccicheck COCCI= MODE=report + + + Proposing new semantic patches +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +New semantic patches can be proposed and submitted by kernel +developers. For sake of clarity, they should be organized in the +subdirectories of 'scripts/coccinelle/'. + + + Detailed description of the 'report' mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +'report' generates a list in the following format: + file:line:column-column: message + +Example: + +Running + + make coccicheck MODE=report COCCI=scripts/coccinelle/err_cast.cocci + +will execute the following part of the SmPL script. + + +@r depends on !context && !patch && (org || report)@ +expression x; +position p; +@@ + + ERR_PTR@p(PTR_ERR(x)) + +@script:python depends on report@ +p << r.p; +x << r.x; +@@ + +msg="ERR_CAST can be used with %s" % (x) +coccilib.report.print_report(p[0], msg) + + +This SmPL excerpt generates entries on the standard output, as +illustrated below: + +/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg +/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth +/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg + + + Detailed description of the 'patch' mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When the 'patch' mode is available, it proposes a fix for each problem +identified. + +Example: + +Running + make coccicheck MODE=patch COCCI=scripts/coccinelle/err_cast.cocci + +will execute the following part of the SmPL script. + + +@ depends on !context && patch && !org && !report @ +expression x; +@@ + +- ERR_PTR(PTR_ERR(x)) ++ ERR_CAST(x) + + +This SmPL excerpt generates patch hunks on the standard output, as +illustrated below: + +diff -u -p a/crypto/ctr.c b/crypto/ctr.c +--- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200 ++++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200 +@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + if (IS_ERR(alg)) +- return ERR_PTR(PTR_ERR(alg)); ++ return ERR_CAST(alg); + + /* Block size must be >= 4 bytes. */ + err = -EINVAL; + + Detailed description of the 'context' mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +'context' highlights lines of interest and their context +in a diff-like style. + +NOTE: The diff-like output generated is NOT an applicable patch. The + intent of the 'context' mode is to highlight the important lines + (annotated with minus, '-') and gives some surrounding context + lines around. This output can be used with the diff mode of + Emacs to review the code. + +Example: + +Running + make coccicheck MODE=context COCCI=scripts/coccinelle/err_cast.cocci + +will execute the following part of the SmPL script. + + +@ depends on context && !patch && !org && !report@ +expression x; +@@ + +* ERR_PTR(PTR_ERR(x)) + + +This SmPL excerpt generates diff hunks on the standard output, as +illustrated below: + +diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing +--- /home/user/linux/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200 ++++ /tmp/nothing +@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + if (IS_ERR(alg)) +- return ERR_PTR(PTR_ERR(alg)); + + /* Block size must be >= 4 bytes. */ + err = -EINVAL; + + Detailed description of the 'org' mode +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +'org' generates a report in the Org mode format of Emacs. + +Example: + +Running + make coccicheck MODE=org COCCI=scripts/coccinelle/err_cast.cocci + +will execute the following part of the SmPL script. + + +@r depends on !context && !patch && (org || report)@ +expression x; +position p; +@@ + + ERR_PTR@p(PTR_ERR(x)) + +@script:python depends on org@ +p << r.p; +x << r.x; +@@ + +msg="ERR_CAST can be used with %s" % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +coccilib.org.print_todo(p[0], msg_safe) + + +This SmPL excerpt generates Org entries on the standard output, as +illustrated below: + +* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]] +* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]] +* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]] diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 634c625da8ce3435e23118e442c47d2d5b903898..1e5165aa9e4ef79eb007d39203524722aa7d21bb 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -22,11 +22,33 @@ building C files and assembler files. KAFLAGS -------------------------------------------------- -Additional options to the assembler. +Additional options to the assembler (for built-in and modules). + +AFLAGS_MODULE +-------------------------------------------------- +Addtional module specific options to use for $(AS). + +AFLAGS_KERNEL +-------------------------------------------------- +Addtional options for $(AS) when used for assembler +code for code that is compiled as built-in. KCFLAGS -------------------------------------------------- -Additional options to the C compiler. +Additional options to the C compiler (for built-in and modules). + +CFLAGS_KERNEL +-------------------------------------------------- +Addtional options for $(CC) when used to compile +code that is compiled as built-in. + +CFLAGS_MODULE +-------------------------------------------------- +Addtional module specific options to use for $(CC). + +LDFLAGS_MODULE +-------------------------------------------------- +Additional options used for $(LD) when linking modules. KBUILD_VERBOSE -------------------------------------------------- @@ -40,15 +62,15 @@ Set the directory to look for the kernel source when building external modules. The directory can be specified in several ways: 1) Use "M=..." on the command line -2) Environmnet variable KBUILD_EXTMOD -3) Environmnet variable SUBDIRS +2) Environment variable KBUILD_EXTMOD +3) Environment variable SUBDIRS The possibilities are listed in the order they take precedence. Using "M=..." will always override the others. KBUILD_OUTPUT -------------------------------------------------- Specify the output directory when building the kernel. -The output directory can also be specificed using "O=...". +The output directory can also be specified using "O=...". Setting "O=..." takes precedence over KBUILD_OUTPUT. ARCH @@ -90,7 +112,7 @@ The script will be called with the following arguments: $3 - kernel map file $4 - default install path (use root directory if blank) -The implmentation of "make install" is architecture specific +The implementation of "make install" is architecture specific and it may differ from the above. INSTALLKERNEL is provided to enable the possibility to diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index b2cb16ebcb161c7cc7751232411982e8deb395df..cca46b1a0f6c2a33f4a39ea87f49a4ae91585c2c 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -65,7 +65,7 @@ also use the environment variable KCONFIG_ALLCONFIG as a flag or a filename that contains config symbols that the user requires to be set to a specific value. If KCONFIG_ALLCONFIG is used without a filename, "make *config" checks for a file named -"all{yes/mod/no/random}.config" (corresponding to the *config command +"all{yes/mod/no/def/random}.config" (corresponding to the *config command that was used) for symbol values that are to be forced. If this file is not found, it checks for a file named "all.config" to contain forced values. diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 71c602d61680d422694a81c08b0cd4f802e18e7c..c375313cb12882a956364664b22a927bc96b936e 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -168,7 +168,7 @@ more details, with real examples. #drivers/isdn/i4l/Makefile # Makefile for the kernel ISDN subsystem and device drivers. # Each configuration option enables a list of files. - obj-$(CONFIG_ISDN) += isdn.o + obj-$(CONFIG_ISDN_I4L) += isdn.o obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o --- 3.3 Loadable module goals - obj-m @@ -187,34 +187,35 @@ more details, with real examples. Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm' If a kernel module is built from several source files, you specify - that you want to build a module in the same way as above. - - Kbuild needs to know which the parts that you want to build your - module from, so you have to tell it by setting an - $(-objs) variable. + that you want to build a module in the same way as above; however, + kbuild needs to know which object files you want to build your + module from, so you have to tell it by setting a $(-y) + variable. Example: #drivers/isdn/i4l/Makefile - obj-$(CONFIG_ISDN) += isdn.o - isdn-objs := isdn_net_lib.o isdn_v110.o isdn_common.o + obj-$(CONFIG_ISDN_I4L) += isdn.o + isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o In this example, the module name will be isdn.o. Kbuild will - compile the objects listed in $(isdn-objs) and then run + compile the objects listed in $(isdn-y) and then run "$(LD) -r" on the list of these files to generate isdn.o. - Kbuild recognises objects used for composite objects by the suffix - -objs, and the suffix -y. This allows the Makefiles to use - the value of a CONFIG_ symbol to determine if an object is part - of a composite object. + Due to kbuild recognizing $(-y) for composite objects, + you can use the value of a CONFIG_ symbol to optionally include an + object file as part of a composite object. Example: #fs/ext2/Makefile - obj-$(CONFIG_EXT2_FS) += ext2.o - ext2-y := balloc.o bitmap.o - ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o + obj-$(CONFIG_EXT2_FS) += ext2.o + ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \ + namei.o super.o symlink.o + ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \ + xattr_trusted.o - In this example, xattr.o is only part of the composite object - ext2.o if $(CONFIG_EXT2_FS_XATTR) evaluates to 'y'. + In this example, xattr.o, xattr_user.o and xattr_trusted.o are only + part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR) + evaluates to 'y'. Note: Of course, when you are building objects into the kernel, the syntax above will also work. So, if you have CONFIG_EXT2_FS=y, @@ -244,12 +245,12 @@ more details, with real examples. may contain both a built-in.o and a lib.a file. Example: - #arch/i386/lib/Makefile - lib-y := checksum.o delay.o + #arch/x86/lib/Makefile + lib-y := delay.o - This will create a library lib.a based on checksum.o and delay.o. - For kbuild to actually recognize that there is a lib.a being built, - the directory shall be listed in libs-y. + This will create a library lib.a based on delay.o. For kbuild to + actually recognize that there is a lib.a being built, the directory + shall be listed in libs-y. See also "6.3 List directories to visit when descending". Use of lib-y is normally restricted to lib/ and arch/*/lib. @@ -284,43 +285,40 @@ more details, with real examples. --- 3.7 Compilation flags ccflags-y, asflags-y and ldflags-y - The three flags listed above applies only to the kbuild makefile - where they are assigned. They are used for all the normal - cc, as and ld invocation happenign during a recursive build. + These three flags apply only to the kbuild makefile in which they + are assigned. They are used for all the normal cc, as and ld + invocations happening during a recursive build. Note: Flags with the same behaviour were previously named: EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS. - They are yet supported but their use are deprecated. + They are still supported but their usage is deprecated. - ccflags-y specifies options for compiling C files with $(CC). + ccflags-y specifies options for compiling with $(CC). Example: - # drivers/sound/emu10k1/Makefile - ccflags-y += -I$(obj) - ccflags-$(DEBUG) += -DEMU10K1_DEBUG - + # drivers/acpi/Makefile + ccflags-y := -Os + ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT This variable is necessary because the top Makefile owns the variable $(KBUILD_CFLAGS) and uses it for compilation flags for the entire tree. - asflags-y is a similar string for per-directory options - when compiling assembly language source. + asflags-y specifies options for assembling with $(AS). Example: - #arch/x86_64/kernel/Makefile - asflags-y := -traditional - + #arch/sparc/kernel/Makefile + asflags-y := -ansi - ldflags-y is a string for per-directory options to $(LD). + ldflags-y specifies options for linking with $(LD). Example: - #arch/m68k/fpsp040/Makefile - ldflags-y := -x + #arch/cris/boot/compressed/Makefile + ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds subdir-ccflags-y, subdir-asflags-y - The two flags listed above are similar to ccflags-y and as-falgs-y. - The difference is that the subdir- variants has effect for the kbuild - file where tey are present and all subdirectories. + The two flags listed above are similar to ccflags-y and asflags-y. + The difference is that the subdir- variants have effect for the kbuild + file where they are present and all subdirectories. Options specified using subdir-* are added to the commandline before the options specified using the non-subdir variants. @@ -340,18 +338,18 @@ more details, with real examples. CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ \ -DGDTH_STATISTICS - CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM - These three lines specify compilation flags for aha152x.o, - gdth.o, and seagate.o + These two lines specify compilation flags for aha152x.o and gdth.o. $(AFLAGS_$@) is a similar feature for source files in assembly languages. Example: # arch/arm/kernel/Makefile - AFLAGS_head-armv.o := -DTEXTADDR=$(TEXTADDR) -traditional - AFLAGS_head-armo.o := -DTEXTADDR=$(TEXTADDR) -traditional + AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) + AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 + AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt + --- 3.9 Dependency tracking @@ -923,16 +921,33 @@ When kbuild executes, the following steps are followed (roughly): The first example utilises the trick that a config option expands to 'y' when selected. - CFLAGS_KERNEL $(CC) options specific for built-in + KBUILD_AFLAGS_KERNEL $(AS) options specific for built-in + + $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile + resident kernel code. + + KBUILD_AFLAGS_MODULE Options for $(AS) when building modules + + $(KBUILD_AFLAGS_MODULE) is used to add arch specific options that + are used for $(AS). + From commandline AFLAGS_MODULE shall be used (see kbuild.txt). - $(CFLAGS_KERNEL) contains extra C compiler flags used to compile + KBUILD_CFLAGS_KERNEL $(CC) options specific for built-in + + $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile resident kernel code. - CFLAGS_MODULE $(CC) options specific for modules + KBUILD_CFLAGS_MODULE Options for $(CC) when building modules + + $(KBUILD_CFLAGS_MODULE) is used to add arch specific options that + are used for $(CC). + From commandline CFLAGS_MODULE shall be used (see kbuild.txt). - $(CFLAGS_MODULE) contains extra C compiler flags used to compile code - for loadable kernel modules. + KBUILD_LDFLAGS_MODULE Options for $(LD) when linking modules + $(KBUILD_LDFLAGS_MODULE) is used to add arch specific options + used when linking modules. This is often a linker script. + From commandline LDFLAGS_MODULE shall be used (see kbuild.txt). --- 6.2 Add prerequisites to archprepare: @@ -1176,14 +1191,14 @@ When kbuild executes, the following steps are followed (roughly): === 7 Kbuild syntax for exported headers The kernel include a set of headers that is exported to userspace. -Many headers can be exported as-is but other headers requires a +Many headers can be exported as-is but other headers require a minimal pre-processing before they are ready for user-space. The pre-processing does: - drop kernel specific annotations - drop include of compiler.h -- drop all sections that is kernel internat (guarded by ifdef __KERNEL__) +- drop all sections that are kernel internal (guarded by ifdef __KERNEL__) -Each relevant directory contain a file name "Kbuild" which specify the +Each relevant directory contains a file name "Kbuild" which specifies the headers to be exported. See subsequent chapter for the syntax of the Kbuild file. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d9239d5f3ad38ee2aca01e1c6cf25f4c1a6c82a5..f72ba727441faa8dd6f06ba78931052aeb62a2b5 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -116,6 +116,7 @@ parameter is applicable: More X86-64 boot options can be found in Documentation/x86/x86_64/boot-options.txt . X86 Either 32bit or 64bit x86 (same as X86-32+X86-64) + XEN Xen support is enabled In addition, the following text indicates that the option: @@ -1144,9 +1145,12 @@ and is between 256 and 4096 characters. It is defined in the file kgdboc= [KGDB,HW] kgdb over consoles. Requires a tty driver that supports console polling, or a supported polling keyboard driver (non-usb). - Serial only format: [,baud] - keyboard only format: kbd - keyboard and serial format: kbd,[,baud] + Serial only format: [,baud] + keyboard only format: kbd + keyboard and serial format: kbd,[,baud] + Optional Kernel mode setting: + kms, kbd format: kms,kbd + kms, kbd and serial format: kms,kbd,[,baud] kgdbwait [KGDB] Stop kernel execution and enter the kernel debugger at the earliest opportunity. @@ -2886,6 +2890,16 @@ and is between 256 and 4096 characters. It is defined in the file xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. xd_geo= See header of drivers/block/xd.c. + xen_emul_unplug= [HW,X86,XEN] + Unplug Xen emulated devices + Format: [unplug0,][unplug1] + ide-disks -- unplug primary master IDE devices + aux-ide-disks -- unplug non-primary-master IDE devices + nics -- unplug network devices + all -- unplug all emulated devices (NICs and IDE disks) + ignore -- continue loading the Xen platform PCI driver even + if the version check failed + xirc2ps_cs= [NET,PCMCIA] Format: ,,,,,[,[,[,]]] diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 6653017680ddcd0d813b074245de53c3b59310fb..1762b81fcdf2ec4a235423687865453a16196aed 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -285,6 +285,7 @@ architectures: - sparc64 (Return probes not yet implemented.) - arm - ppc +- mips 3. Configuring Kprobes diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index deb35de709886085594e35e142c627d2942366b7..b66cb6d31d69632b7bc66d2fec56ef59e72bee02 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also drive DVI monitors. Required properties: -- compatible : should be "fsl-diu". +- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". - reg : should contain at least address and length of the DIU register set. -- Interrupts : one DIU interrupt should be describe here. +- interrupts : one DIU interrupt should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. Example (MPC8610HPCD): display@2c000 { @@ -16,3 +23,12 @@ Example (MPC8610HPCD): interrupts = <72 2>; interrupt-parent = <&mpic>; }; + +Example for MPC5121: + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = <&ipic>; + edid = [edid-data]; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index 50da20310585f836eb8a13f2d6c922e14c21db73..1eacd6b20ed5eb8434d38f52c356834149bc3344 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -20,6 +20,7 @@ Recommended properties : - fsl,preserve-clocking : boolean; if defined, the clock settings from the bootloader are preserved (not touched). - clock-frequency : desired I2C bus clock frequency in Hz. + - fsl,timeout : I2C bus timeout in microseconds. Examples : @@ -59,4 +60,5 @@ Examples : interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; + fsl,timeout = <10000>; }; diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index 66e9358e2144233323e8b90ce75f9007999e7b2f..ccd951fa94eeda42a5a50c854b6b92e512fe6724 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -694,7 +694,7 @@ static void usage(void) #endif " -l|--list Show page details in ranges\n" " -L|--list-each Show page details one by one\n" -" -N|--no-summary Don't show summay info\n" +" -N|--no-summary Don't show summary info\n" " -X|--hwpoison hwpoison pages\n" " -x|--unpoison unpoison pages\n" " -h|--help Show this usage message\n" diff --git a/MAINTAINERS b/MAINTAINERS index 9eb77130b7cd3082daaa0dbc94caf51828f8b691..e6db704f7c35dc301d40118b25067b608f4bcecf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -694,6 +694,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git F: arch/arm/mach-sa1100/jornada720.c F: arch/arm/mach-sa1100/include/mach/jornada720.h +ARM/INCOME PXA270 SUPPORT +M: Marek Vasut +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/income.c +F: arch/arm/mach-pxa/include/mach-pxa/income.h + ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek M: Dan Williams @@ -949,8 +956,9 @@ ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt M: Magnus Damm L: linux-sh@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git W: http://oss.renesas.com +Q: http://patchwork.kernel.org/project/linux-sh/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ @@ -1570,6 +1578,16 @@ L: platform-driver-x86@vger.kernel.org S: Supported F: drivers/platform/x86/classmate-laptop.c +COCCINELLE/Semantic Patches (SmPL) +M: Julia Lawall +M: Gilles Muller +M: Nicolas Palix +L: cocci@diku.dk (moderated for non-subscribers) +W: http://coccinelle.lip6.fr/ +S: Supported +F: scripts/coccinelle/ +F: scripts/coccicheck + CODA FILE SYSTEM M: Jan Harkes M: coda@cs.cmu.edu @@ -3267,8 +3285,8 @@ F: fs/autofs4/ KERNEL BUILD + files below scripts/ (unless maintained elsewhere) M: Michal Marek -T: git git://repo.or.cz/linux-kbuild.git for-next -T: git git://repo.or.cz/linux-kbuild.git for-linus +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git for-next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git rc-fixes L: linux-kbuild@vger.kernel.org S: Maintained F: Documentation/kbuild/ @@ -4732,7 +4750,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER -M: Nick Piggin +M: Nick Piggin S: Maintained F: Documentation/blockdev/ramdisk.txt F: drivers/block/brd.c @@ -5358,7 +5376,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git S: Maintained F: arch/sparc/ -F: drivers/sbus +F: drivers/sbus/ SPARC SERIAL DRIVERS M: "David S. Miller" diff --git a/Makefile b/Makefile index 141da26fda4b87870ba19237f61ced915d0cebcb..66c94aad36651e723898749f94c163a72bf90705 100644 --- a/Makefile +++ b/Makefile @@ -332,10 +332,9 @@ CHECK = sparse CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ -Wbitwise -Wno-return-void $(CF) -MODFLAGS = -DMODULE -CFLAGS_MODULE = $(MODFLAGS) -AFLAGS_MODULE = $(MODFLAGS) -LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds +CFLAGS_MODULE = +AFLAGS_MODULE = +LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = CFLAGS_GCOV = -fprofile-arcs -ftest-coverage @@ -354,7 +353,12 @@ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -Werror-implicit-function-declaration \ -Wno-format-security \ -fno-delete-null-pointer-checks +KBUILD_AFLAGS_KERNEL := +KBUILD_CFLAGS_KERNEL := KBUILD_AFLAGS := -D__ASSEMBLY__ +KBUILD_AFLAGS_MODULE := -DMODULE +KBUILD_CFLAGS_MODULE := -DMODULE +KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) @@ -369,6 +373,8 @@ export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE +export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE +export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL # When compiling out-of-tree modules, put MODVERDIR in the module # tree rather than in the kernel tree. The kernel tree might @@ -412,9 +418,9 @@ endif # of make so .config is not included in this case either (for *config). no-dot-config-targets := clean mrproper distclean \ - cscope TAGS tags help %docs check% \ + cscope TAGS tags help %docs check% coccicheck \ include/linux/version.h headers_% \ - kernelrelease kernelversion + kernelversion config-targets := 0 mixed-targets := 0 @@ -526,7 +532,7 @@ endif # $(dot-config) # The all: target is the default when no target is given on the # command line. # This allow a user to issue only 'make' to build a kernel including modules -# Defaults vmlinux but it is usually overridden in the arch makefile +# Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE @@ -557,6 +563,10 @@ KBUILD_CFLAGS += -g KBUILD_AFLAGS += -gdwarf-2 endif +ifdef CONFIG_DEBUG_INFO_REDUCED +KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) +endif + ifdef CONFIG_FUNCTION_TRACER KBUILD_CFLAGS += -pg endif @@ -603,7 +613,7 @@ endif # Use --build-id when available. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ $(call cc-ldoption, -Wl$(comma)--build-id,)) -LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) +KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID) ifeq ($(CONFIG_STRIP_ASM_SYMS),y) @@ -1209,8 +1219,9 @@ help: @echo ' includecheck - Check for duplicate included header files' @echo ' export_report - List the usages of all exported symbols' @echo ' headers_check - Sanity check on exported headers' - @echo ' headerdep - Detect inclusion cycles in headers'; \ - echo '' + @echo ' headerdep - Detect inclusion cycles in headers' + @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help + @echo '' @echo 'Kernel packaging:' @$(MAKE) $(build)=$(package-dir) help @echo '' @@ -1369,6 +1380,9 @@ versioncheck: -name '*.[hcS]' -type f -print | sort \ | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl +coccicheck: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@ + namespacecheck: $(PERL) $(srctree)/scripts/namespace.pl @@ -1393,9 +1407,9 @@ checkstack: $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH) -kernelrelease: - $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \ - $(error kernelrelease not valid - run 'make prepare' to update it)) +kernelrelease: include/config/kernel.release + @echo $(KERNELRELEASE) + kernelversion: @echo $(KERNELVERSION) @@ -1472,6 +1486,7 @@ cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*) a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \ + $(KBUILD_AFLAGS_KERNEL) \ $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e39caa8b0c93e323c9c1e2feda7bb90fd1a3a4a1..37a36457bb38f81e823ca2d3b790af08e88f6901 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -636,6 +636,7 @@ config ARCH_S3C2410 select ARCH_HAS_CPUFREQ select HAVE_CLK select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -665,6 +666,8 @@ config ARCH_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT + select HAVE_S3C2410_I2C + select HAVE_S3C2410_WATCHDOG help Samsung S3C64XX series based systems @@ -673,7 +676,10 @@ config ARCH_S5P6440 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select HAVE_S3C2410_WATCHDOG select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC help Samsung S5P6440 CPU based systems @@ -683,6 +689,7 @@ config ARCH_S5P6442 select GENERIC_GPIO select HAVE_CLK select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_WATCHDOG help Samsung S5P6442 CPU based systems @@ -693,6 +700,9 @@ config ARCH_S5PC100 select CPU_V7 select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC + select HAVE_S3C2410_WATCHDOG help Samsung S5PC100 series based systems @@ -703,9 +713,21 @@ config ARCH_S5PV210 select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C + select HAVE_S3C_RTC + select HAVE_S3C2410_WATCHDOG help Samsung S5PV210/S5PC110 series based systems +config ARCH_S5PV310 + bool "Samsung S5PV310/S5PC210" + select CPU_V7 + select GENERIC_GPIO + select HAVE_CLK + select GENERIC_CLOCKEVENTS + help + Samsung S5PV310 series based systems + config ARCH_SHARK bool "Shark" select CPU_SA110 @@ -907,6 +929,8 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" +source "arch/arm/mach-s5pv310/Kconfig" + source "arch/arm/mach-shmobile/Kconfig" source "arch/arm/plat-stmp3xxx/Kconfig" @@ -1098,10 +1122,11 @@ config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_S5PV310) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 ||\ + ARCH_S5PV310) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1171,9 +1196,9 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4) - default y - select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500) + ARCH_S5PV310 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \ + ARCH_U8500 || ARCH_VEXPRESS) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1184,7 +1209,8 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 63d998e8c672ef4488eb72df2cfdcce2f7ae502f..24f58d8576ede99484de36c48c9fe7d402dd9b7d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_S5P6440) := s5p6440 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 +machine-$(CONFIG_ARCH_S5PV310) := s5pv310 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7636c9b3f9a7899f9209d9a82fa78de8a6dc9b17..68775e33476c2fafb4c20d88f7f676c836a8edc1 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif -ifeq ($(CONFIG_PXA_SHARPSL),y) +ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y) OBJS += head-sharpsl.o endif diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 7974baacafcea74ec055a46ee0f6cea496f24e6f..6c091356245593b87860d2ccb6221650fc62855b 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -263,14 +263,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dev->bus == &pci_bus_type) && - ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); -} - int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { it8152_io.start = IT8152_IO_BASE + 0x12000; diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig deleted file mode 100644 index 22c2d147f793a8b8416649c72c97c5119cb25f18..0000000000000000000000000000000000000000 --- a/arch/arm/configs/s5pc110_defconfig +++ /dev/null @@ -1,66 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PV210=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDKC110=y -CONFIG_VMSPLIT_2G=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 1753836d00555b1bfbfe16012b5124400b3b628b..0488a1eb4d7dd9c67f0c24a0fd837eed29f020cd 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_S5PV210=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_DEV_FB=y +CONFIG_S5PV210_SETUP_FB_24BPP=y +CONFIG_MACH_AQUILA=y +CONFIG_MACH_GONI=y +CONFIG_MACH_SMDKC110=y CONFIG_MACH_SMDKV210=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 69ce0727edb534d5eb088cf37e810de5bd8e9306..b5ccc6a993d59fc94d8eeb02d857946e4502a959 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -298,7 +298,15 @@ extern void dmabounce_unregister_dev(struct device *); * DMA access and 1 if the buffer needs to be bounced. * */ +#ifdef CONFIG_SA1111 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); +#else +static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr, + size_t size) +{ + return 0; +} +#endif /* * The DMA API, implemented by dmabounce.c. See below for descriptions. diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h index 46492a63a7c4817ee3763fdadafa85ddbfd1b77e..ebb3ceaa8facf0f277dd2c088cdd22611a7b011c 100644 --- a/arch/arm/include/asm/hardware/scoop.h +++ b/arch/arm/include/asm/hardware/scoop.h @@ -22,18 +22,23 @@ #define SCOOP_GPWR 0x24 #define SCOOP_GPRR 0x28 -#define SCOOP_GPCR_PA22 ( 1 << 12 ) -#define SCOOP_GPCR_PA21 ( 1 << 11 ) -#define SCOOP_GPCR_PA20 ( 1 << 10 ) -#define SCOOP_GPCR_PA19 ( 1 << 9 ) -#define SCOOP_GPCR_PA18 ( 1 << 8 ) -#define SCOOP_GPCR_PA17 ( 1 << 7 ) -#define SCOOP_GPCR_PA16 ( 1 << 6 ) -#define SCOOP_GPCR_PA15 ( 1 << 5 ) -#define SCOOP_GPCR_PA14 ( 1 << 4 ) -#define SCOOP_GPCR_PA13 ( 1 << 3 ) -#define SCOOP_GPCR_PA12 ( 1 << 2 ) -#define SCOOP_GPCR_PA11 ( 1 << 1 ) +#define SCOOP_CPR_OUT (1 << 7) +#define SCOOP_CPR_SD_3V (1 << 2) +#define SCOOP_CPR_CF_XV (1 << 1) +#define SCOOP_CPR_CF_3V (1 << 0) + +#define SCOOP_GPCR_PA22 (1 << 12) +#define SCOOP_GPCR_PA21 (1 << 11) +#define SCOOP_GPCR_PA20 (1 << 10) +#define SCOOP_GPCR_PA19 (1 << 9) +#define SCOOP_GPCR_PA18 (1 << 8) +#define SCOOP_GPCR_PA17 (1 << 7) +#define SCOOP_GPCR_PA16 (1 << 6) +#define SCOOP_GPCR_PA15 (1 << 5) +#define SCOOP_GPCR_PA14 (1 << 4) +#define SCOOP_GPCR_PA13 (1 << 3) +#define SCOOP_GPCR_PA12 (1 << 2) +#define SCOOP_GPCR_PA11 (1 << 1) struct scoop_config { unsigned short io_out; diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h index 67af4b841984e44cab60be11686c423fe58a76f9..08265993227fc1d03bec79f7a420f63c005a3f2c 100644 --- a/arch/arm/include/asm/kgdb.h +++ b/arch/arm/include/asm/kgdb.h @@ -70,11 +70,11 @@ extern int kgdb_fault_expected; #define _GP_REGS 16 #define _FP_REGS 8 #define _EXTRA_REGS 2 -#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) +#define DBG_MAX_REG_NUM (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) #define KGDB_MAX_NO_CPUS 1 #define BUFMAX 400 -#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMREGBYTES (DBG_MAX_REG_NUM << 2) #define NUMCRITREGBYTES (32 << 2) #define _R0 0 @@ -93,7 +93,7 @@ extern int kgdb_fault_expected; #define _SPT 13 #define _LR 14 #define _PC 15 -#define _CPSR (GDB_MAX_REGS - 1) +#define _CPSR (DBG_MAX_REG_NUM - 1) /* * So that we can denote the end of a frame for tracing, diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index c868a8864117bbf0f3330ebd80150f263a3200ed..778c2f7024ff57304227ce67665e749f39b05fc7 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -10,57 +10,62 @@ * Deepak Saxena */ #include +#include #include #include -/* Make a local copy of the registers passed into the handler (bletch) */ -void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { - int regno; - - /* Initialize all to zero. */ - for (regno = 0; regno < GDB_MAX_REGS; regno++) - gdb_regs[regno] = 0; + { "r0", 4, offsetof(struct pt_regs, ARM_r0)}, + { "r1", 4, offsetof(struct pt_regs, ARM_r1)}, + { "r2", 4, offsetof(struct pt_regs, ARM_r2)}, + { "r3", 4, offsetof(struct pt_regs, ARM_r3)}, + { "r4", 4, offsetof(struct pt_regs, ARM_r4)}, + { "r5", 4, offsetof(struct pt_regs, ARM_r5)}, + { "r6", 4, offsetof(struct pt_regs, ARM_r6)}, + { "r7", 4, offsetof(struct pt_regs, ARM_r7)}, + { "r8", 4, offsetof(struct pt_regs, ARM_r8)}, + { "r9", 4, offsetof(struct pt_regs, ARM_r9)}, + { "r10", 4, offsetof(struct pt_regs, ARM_r10)}, + { "fp", 4, offsetof(struct pt_regs, ARM_fp)}, + { "ip", 4, offsetof(struct pt_regs, ARM_ip)}, + { "sp", 4, offsetof(struct pt_regs, ARM_sp)}, + { "lr", 4, offsetof(struct pt_regs, ARM_lr)}, + { "pc", 4, offsetof(struct pt_regs, ARM_pc)}, + { "f0", 12, -1 }, + { "f1", 12, -1 }, + { "f2", 12, -1 }, + { "f3", 12, -1 }, + { "f4", 12, -1 }, + { "f5", 12, -1 }, + { "f6", 12, -1 }, + { "f7", 12, -1 }, + { "fps", 4, -1 }, + { "cpsr", 4, offsetof(struct pt_regs, ARM_cpsr)}, +}; - gdb_regs[_R0] = kernel_regs->ARM_r0; - gdb_regs[_R1] = kernel_regs->ARM_r1; - gdb_regs[_R2] = kernel_regs->ARM_r2; - gdb_regs[_R3] = kernel_regs->ARM_r3; - gdb_regs[_R4] = kernel_regs->ARM_r4; - gdb_regs[_R5] = kernel_regs->ARM_r5; - gdb_regs[_R6] = kernel_regs->ARM_r6; - gdb_regs[_R7] = kernel_regs->ARM_r7; - gdb_regs[_R8] = kernel_regs->ARM_r8; - gdb_regs[_R9] = kernel_regs->ARM_r9; - gdb_regs[_R10] = kernel_regs->ARM_r10; - gdb_regs[_FP] = kernel_regs->ARM_fp; - gdb_regs[_IP] = kernel_regs->ARM_ip; - gdb_regs[_SPT] = kernel_regs->ARM_sp; - gdb_regs[_LR] = kernel_regs->ARM_lr; - gdb_regs[_PC] = kernel_regs->ARM_pc; - gdb_regs[_CPSR] = kernel_regs->ARM_cpsr; +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1) + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + else + memset(mem, 0, dbg_reg_def[regno].size); + return dbg_reg_def[regno].name; } -/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ -void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) { - kernel_regs->ARM_r0 = gdb_regs[_R0]; - kernel_regs->ARM_r1 = gdb_regs[_R1]; - kernel_regs->ARM_r2 = gdb_regs[_R2]; - kernel_regs->ARM_r3 = gdb_regs[_R3]; - kernel_regs->ARM_r4 = gdb_regs[_R4]; - kernel_regs->ARM_r5 = gdb_regs[_R5]; - kernel_regs->ARM_r6 = gdb_regs[_R6]; - kernel_regs->ARM_r7 = gdb_regs[_R7]; - kernel_regs->ARM_r8 = gdb_regs[_R8]; - kernel_regs->ARM_r9 = gdb_regs[_R9]; - kernel_regs->ARM_r10 = gdb_regs[_R10]; - kernel_regs->ARM_fp = gdb_regs[_FP]; - kernel_regs->ARM_ip = gdb_regs[_IP]; - kernel_regs->ARM_sp = gdb_regs[_SPT]; - kernel_regs->ARM_lr = gdb_regs[_LR]; - kernel_regs->ARM_pc = gdb_regs[_PC]; - kernel_regs->ARM_cpsr = gdb_regs[_CPSR]; + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return -EINVAL; + + if (dbg_reg_def[regno].offset != -1) + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + return 0; } void @@ -176,6 +181,33 @@ void kgdb_roundup_cpus(unsigned long flags) local_irq_disable(); } +static int __kgdb_notify(struct die_args *args, unsigned long cmd) +{ + struct pt_regs *regs = args->regs; + + if (kgdb_handle_exception(1, args->signr, cmd, regs)) + return NOTIFY_DONE; + return NOTIFY_STOP; +} +static int +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = __kgdb_notify(ptr, cmd); + local_irq_restore(flags); + + return ret; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_notify, + .priority = -INT_MAX, +}; + + /** * kgdb_arch_init - Perform any architecture specific initalization. * @@ -184,6 +216,11 @@ void kgdb_roundup_cpus(unsigned long flags) */ int kgdb_arch_init(void) { + int ret = register_die_notifier(&kgdb_notifier); + + if (ret != 0) + return ret; + register_undef_hook(&kgdb_brkpt_hook); register_undef_hook(&kgdb_compiled_brkpt_hook); @@ -200,6 +237,7 @@ void kgdb_arch_exit(void) { unregister_undef_hook(&kgdb_brkpt_hook); unregister_undef_hook(&kgdb_compiled_brkpt_hook); + unregister_die_notifier(&kgdb_notifier); } /* diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 244655d323ea2b255bd3614671290c5c2683b0a2..0629394a5fb9ad3dce6b73f0298a9ae56f52310f 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -150,9 +150,8 @@ static void __init common_init(void) MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, @@ -160,9 +159,8 @@ MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 8c3fa5d14f4bf44fad8ada81f230353934876e87..69bcba11f53f94d8cd5ee6d8f4f0a67d17847a70 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -42,9 +42,8 @@ static void __init avengers_lite_init(void) MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = avengers_lite_init, diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index e1e66c18b44633db8569cdf79b02801245bfbb13..3b29fa7e9b084c1c3891aea452d1e5cda5c35a03 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -31,7 +31,7 @@ static struct map_desc standard_io_desc[] __initdata = { }, }; -void __init pxa_map_io(void) +void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); } diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index b4a0ba05a0f4fe54af1bc20a5fb4878149824642..ec8d65ded25cb7a6dd908f1d950da7366d38618a 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -3,15 +3,6 @@ struct sys_timer; extern void timer_init(int irq); -extern void mmp2_clear_pmic_int(void); - -extern struct sys_timer pxa168_timer; -extern struct sys_timer pxa910_timer; -extern struct sys_timer mmp2_timer; -extern void __init pxa168_init_irq(void); -extern void __init pxa910_init_irq(void); -extern void __init mmp2_init_icu(void); -extern void __init mmp2_init_irq(void); extern void __init icu_init_irq(void); -extern void __init pxa_map_io(void); +extern void __init mmp_map_io(void); diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 4ec7709a34628ac361290a5e46abc411008af502..e4312d238eae3ec4e3a4b9a93564a5a265619549 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -114,9 +114,8 @@ static void __init flint_init(void) MACHINE_START(FLINT, "Flint Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = flint_init, diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h index 1fa0a492454adc305d70ee89313450b6383cde83..d0ec7dae88e4c06f9050f4bf3b2223121109c8c0 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -1,3 +1,6 @@ +#ifndef __MACH_DEVICE_H +#define __MACH_DEVICE_H + #include #define MAX_RESOURCE_DMA 2 @@ -47,3 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \ } extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); +#endif /* __MACH_DEVICE_H */ diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index fec220bd5046a4f64e8c16bf3df76980f1763a84..dbba6e8a60c41487e3cf4e61cecf9ef6c8231ea9 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -1,6 +1,13 @@ #ifndef __ASM_MACH_MMP2_H #define __ASM_MACH_MMP2_H +struct sys_timer; + +extern struct sys_timer mmp2_timer; +extern void __init mmp2_init_icu(void); +extern void __init mmp2_init_irq(void); +extern void mmp2_clear_pmic_int(void); + #include #include #include diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 3b2bd5d5eb050892d093a13f502b115eb83e3baf..27e1bc758623808cb30ed6471ca2d45fb2b40dbd 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,6 +1,11 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H +struct sys_timer; + +extern struct sys_timer pxa168_timer; +extern void __init pxa168_init_irq(void); + #include #include #include diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 4f0b4ec6f5d0530f158799254271b5e0601dd9a2..f13c49d6f8dc052988e6f5f407f333c2be183a2e 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,6 +1,11 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H +struct sys_timer; + +extern struct sys_timer pxa910_timer; +extern void __init pxa910_init_irq(void); + #include #include #include diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c index cb18221c0af3bad337e6655f5ecd605a94e818a8..01342be91c3c6a5df238b39d4a4f5ddf95b118b5 100644 --- a/arch/arm/mach-mmp/irq-mmp2.c +++ b/arch/arm/mach-mmp/irq-mmp2.c @@ -16,6 +16,7 @@ #include #include +#include #include "common.h" diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index d77dd41d60e1c170858706f7357fb6a82a18f33a..80c3e7ab1e1700c2aa96bdb9270b0e5a57004b3f 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -135,9 +135,8 @@ static void __init jasper_init(void) MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = jasper_init, diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 7f5eb059bb015f27a153efcb144d5717142f9a1a..daf3993349f81986fa8f5b90ca0c4bcb4e7acc8a 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -17,6 +17,7 @@ #include +#include #include #include #include @@ -26,6 +27,7 @@ #include #include #include +#include #include "common.h" #include "clock.h" @@ -158,6 +160,26 @@ static int __init mmp2_init(void) } postcore_initcall(mmp2_init); +static void __init mmp2_timer_init(void) +{ + unsigned long clk_rst; + + __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); + + /* + * enable bus/functional clock, enable 6.5MHz (divider 4), + * release reset + */ + clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); + __raw_writel(clk_rst, APBC_MMP2_TIMERS); + + timer_init(IRQ_MMP2_TIMER1); +} + +struct sys_timer mmp2_timer = { + .init = mmp2_timer_init, +}; + /* on-chip devices */ MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 0e0c9220eaba3646aeacfc75cd3d27ac5ab81e25..e81db7428215608ee2ade0281a755f9226983411 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -100,9 +100,8 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = tavorevb_init, diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index cf75694e9687d8a982df0af4632a447d45d18d66..66528193f9390c623875670a8450486ff637a875 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -200,24 +200,3 @@ void __init timer_init(int irq) clocksource_register(&cksrc); clockevents_register_device(&ckevt); } - -static void __init mmp2_timer_init(void) -{ - unsigned long clk_rst; - - __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); - - /* - * enable bus/functional clock, enable 6.5MHz (divider 4), - * release reset - */ - clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); - __raw_writel(clk_rst, APBC_MMP2_TIMERS); - - timer_init(IRQ_MMP2_TIMER1); -} - -struct sys_timer mmp2_timer = { - .init = mmp2_timer_init, -}; - diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index b22dec4abf78e3597c78b7e44c5922baf07d51e0..ee65e05f0cf15e0118461ce4a7b277e5038a77c2 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -123,9 +123,8 @@ static void __init ttc_dkb_init(void) MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") .phys_io = APB_PHYS_BASE, - .boot_params = 0x00000100, .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, - .map_io = pxa_map_io, + .map_io = mmp_map_io, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = ttc_dkb_init, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3b51741a48109e90c57f59ddbd5ef49810dc567f..7aefb90748527ae5b68550b7e311d1244b55639d 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -238,6 +238,17 @@ config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x +config MACH_COLIBRI_PXA270_EVALBOARD + bool "Toradex Colibri Evaluation Carrier Board support (PXA270)" + depends on MACH_COLIBRI + +config MACH_COLIBRI_PXA270_INCOME + bool "Income s.r.o. PXA270 SBC" + depends on MACH_COLIBRI + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx @@ -336,6 +347,9 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALM27X + bool + config MACH_PALMTE2 bool "Palm Tungsten|E2" default y @@ -360,6 +374,7 @@ config MACH_PALMT5 depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. @@ -370,6 +385,7 @@ config MACH_PALMTX depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. @@ -380,6 +396,7 @@ config MACH_PALMZ72 depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. @@ -390,6 +407,7 @@ config MACH_PALMLD depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select MACH_PALM27X help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. @@ -447,16 +465,13 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config SHARPSL_PM - bool - select APM_EMULATION - select SHARPSL_PM_MAX1111 - -config SHARPSL_PM_MAX1111 - bool - depends on !CORGI_SSP_DEPRECATED - select HWMON - select SENSORS_MAX1111 +config PXA_SHARPSL_DETECT_MACH_ID + bool "Detect machine ID at run-time in the decompressor" + depends on PXA_SHARPSL + help + Say Y here if you want the zImage decompressor to detect + the Zaurus machine ID at run-time. For latest kexec-based + boot loader, this is not necessary. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" @@ -510,6 +525,25 @@ config MACH_TOSA select PXA25x select PXA_HAVE_BOARD_IRQS +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + config MACH_ICONTROL bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" select CPU_PXA320 @@ -648,25 +682,15 @@ config PXA_SHARP_Cxx00 help Enable common support for Sharp Cxx00 models -config TOSA_BT - tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on tosa. - -config TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on MACH_TOSA - default n - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! +config SHARPSL_PM + bool + select APM_EMULATION + select SHARPSL_PM_MAX1111 +config SHARPSL_PM_MAX1111 + bool + select HWMON + select SENSORS_MAX1111 config PXA_HAVE_BOARD_IRQS bool diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index b8f1f4bc7ca78f1335424a359a35b582b885cc8c..85c7fb324dbb88ee68ce1d0da0cf0f9c0e92035c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -51,14 +51,16 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o -obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o -obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_VPAC270) += vpac270.o @@ -73,6 +75,7 @@ obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALM27X) += palm27x.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o @@ -84,12 +87,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o -obj-$(CONFIG_MACH_E330) += e330.o -obj-$(CONFIG_MACH_E350) += e350.o -obj-$(CONFIG_MACH_E740) += e740.o -obj-$(CONFIG_MACH_E750) += e750.o -obj-$(CONFIG_MACH_E400) += e400.o -obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index f3b5ace815e51488f8437f4fc08866e6478e12be..9041340fee1db17cdb6aa670ba43a2457a8193bf 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -22,9 +22,14 @@ #include #include #include +#include #include #include #include +#include +#include +#include +#include #include #include @@ -51,6 +56,59 @@ #include "generic.h" #include "devices.h" +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long balloon3_pin_config[] __initdata = { + /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* Reset, configured as GPIO wakeup source */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + + /* LEDs */ + GPIO9_GPIO, /* NAND activity LED */ + GPIO10_GPIO, /* Heartbeat LED */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, + GPIO95_GPIO, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + /* USB Host */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, +}; + +/****************************************************************************** + * Compatibility: Parameter parsing + ******************************************************************************/ static unsigned long balloon3_irq_enabled; static unsigned long balloon3_features_present = @@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg) } early_param("balloon3_features", parse_balloon3_features); +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition balloon3_nor_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data balloon3_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = balloon3_nor_partitions, + .nr_parts = ARRAY_SIZE(balloon3_nor_partitions) + } +}; + +static struct resource balloon3_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device balloon3_flash = { + .name = "physmap-flash", + .id = 0, + .resource = &balloon3_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = balloon3_flash_data, + }, +}; +static void __init balloon3_nor_init(void) +{ + platform_device_register(&balloon3_flash); +} +#else +static inline void balloon3_nor_init(void) {} +#endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), +}; + + +static struct platform_device balloon3_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init balloon3_ts_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_AUDIO)) + return; + + pxa_set_ac97_info(NULL); + platform_device_register(&balloon3_ucb1400_device); +} +#else +static inline void balloon3_ts_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info balloon3_lcd_modes[] = { + { + .pixclock = 38000, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 8, + .vsync_len = 2, + .upper_margin = 4, + .lower_margin = 5, + .sync = 0, + }, +}; + +static struct pxafb_mach_info balloon3_lcd_screen = { + .modes = balloon3_lcd_modes, + .num_modes = ARRAY_SIZE(balloon3_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static void balloon3_backlight_power(int on) +{ + gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); +} + +static void __init balloon3_lcd_init(void) +{ + int ret; + + if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY)) + return; + + ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON"); + if (ret) { + pr_err("Requesting BKL-ON GPIO failed!\n"); + goto err; + } + + ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); + if (ret) { + pr_err("Setting BKL-ON GPIO direction failed!\n"); + goto err2; + } + + balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; + set_pxa_fb_info(&balloon3_lcd_screen); + return; + +err2: + gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT); +err: + return; +} +#else +static inline void balloon3_lcd_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data balloon3_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = -1, + .gpio_card_ro = -1, + .gpio_power = -1, + .detect_delay_ms = 200, +}; + +static void __init balloon3_mmc_init(void) +{ + pxa_set_mci_info(&balloon3_mci_platform_data); +} +#else +static inline void balloon3_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static void balloon3_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~UP2OCR_DPPUE; +} + +static int balloon3_udc_is_connected(void) +{ + return 1; +} + +static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = { + .udc_command = balloon3_udc_command, + .udc_is_connected = balloon3_udc_is_connected, + .gpio_pullup = -1, +}; + +static void __init balloon3_udc_init(void) +{ + pxa_set_udc_info(&balloon3_udc_info); + platform_device_register(&balloon3_gpio_vbus); +} +#else +static inline void balloon3_udc_init(void) {} +#endif + +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +static struct pxaficp_platform_data balloon3_ficp_platform_data = { + .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF, +}; + +static void __init balloon3_irda_init(void) +{ + pxa_set_ficp_info(&balloon3_ficp_platform_data); +} +#else +static inline void balloon3_irda_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data balloon3_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init balloon3_uhc_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_OHCI)) + return; + pxa_set_ohci_info(&balloon3_ohci_info); +} +#else +static inline void balloon3_uhc_init(void) {} +#endif + +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led balloon3_gpio_leds[] = { + { + .name = "balloon3:green:idle", + .default_trigger = "heartbeat", + .gpio = BALLOON3_GPIO_LED_IDLE, + .active_low = 1, + }, { + .name = "balloon3:green:nand", + .default_trigger = "nand-disk", + .gpio = BALLOON3_GPIO_LED_NAND, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data balloon3_gpio_led_info = { + .leds = balloon3_gpio_leds, + .num_leds = ARRAY_SIZE(balloon3_gpio_leds), +}; + +static struct platform_device balloon3_leds = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &balloon3_gpio_led_info, + } +}; + +struct gpio_led balloon3_pcf_gpio_leds[] = { + { + .name = "balloon3:green:led0", + .gpio = BALLOON3_PCF_GPIO_LED0, + .active_low = 1, + }, { + .name = "balloon3:green:led1", + .gpio = BALLOON3_PCF_GPIO_LED1, + .active_low = 1, + }, { + .name = "balloon3:orange:led2", + .gpio = BALLOON3_PCF_GPIO_LED2, + .active_low = 1, + }, { + .name = "balloon3:orange:led3", + .gpio = BALLOON3_PCF_GPIO_LED3, + .active_low = 1, + }, { + .name = "balloon3:orange:led4", + .gpio = BALLOON3_PCF_GPIO_LED4, + .active_low = 1, + }, { + .name = "balloon3:orange:led5", + .gpio = BALLOON3_PCF_GPIO_LED5, + .active_low = 1, + }, { + .name = "balloon3:red:led6", + .gpio = BALLOON3_PCF_GPIO_LED6, + .active_low = 1, + }, { + .name = "balloon3:red:led7", + .gpio = BALLOON3_PCF_GPIO_LED7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = { + .leds = balloon3_pcf_gpio_leds, + .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds), +}; + +static struct platform_device balloon3_pcf_leds = { + .name = "leds-gpio", + .id = 1, + .dev = { + .platform_data = &balloon3_pcf_gpio_led_info, + } +}; + +static void __init balloon3_leds_init(void) +{ + platform_device_register(&balloon3_leds); + platform_device_register(&balloon3_pcf_leds); +} +#else +static inline void balloon3_leds_init(void) {} +#endif + +/****************************************************************************** + * FPGA IRQ + ******************************************************************************/ static void balloon3_mask_irq(unsigned int irq) { int balloon3_irq = (irq - BALLOON3_IRQ(0)); @@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & balloon3_irq_enabled; - do { /* clear useless edge notification */ if (desc->chip->ack) @@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void) "enabled\n", __func__, BALLOON3_AUX_NIRQ); } -static unsigned long balloon3_ac97_pin_config[] = { - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO113_AC97_nRESET, -}; - -static void balloon3_backlight_power(int on) -{ - pr_debug("%s: power is %s\n", __func__, on ? "on" : "off"); - gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); -} - -static unsigned long balloon3_lcd_pin_config[] = { - /* LCD - 16bpp Active TFT */ - GPIOxx_LCD_TFT_16BPP, - - GPIO99_GPIO, /* Backlight */ +/****************************************************************************** + * GPIO expander + ******************************************************************************/ +#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE) +static struct pcf857x_platform_data balloon3_pcf857x_pdata = { + .gpio_base = BALLOON3_PCF_GPIO_BASE, + .n_latch = 0, + .setup = NULL, + .teardown = NULL, + .context = NULL, }; -static struct pxafb_mode_info balloon3_lcd_modes[] = { +static struct i2c_board_info __initdata balloon3_i2c_devs[] = { { - .pixclock = 38000, - .xres = 480, - .yres = 640, - .bpp = 16, - .hsync_len = 8, - .left_margin = 8, - .right_margin = 8, - .vsync_len = 2, - .upper_margin = 4, - .lower_margin = 5, - .sync = 0, + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &balloon3_pcf857x_pdata, }, }; -static struct pxafb_mach_info balloon3_pxafb_info = { - .modes = balloon3_lcd_modes, - .num_modes = ARRAY_SIZE(balloon3_lcd_modes), - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, - .pxafb_backlight_power = balloon3_backlight_power, -}; +static void __init balloon3_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs)); +} +#else +static inline void balloon3_i2c_init(void) {} +#endif + +/****************************************************************************** + * NAND + ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +static uint16_t balloon3_ctl = + BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | + BALLOON3_NAND_CONTROL_FLWP; + +static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; -static unsigned long balloon3_mmc_pin_config[] = { - GPIO32_MMC_CLK, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - GPIO112_MMC_CMD, -}; + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE; -static void balloon3_mci_setpower(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data *p_d = dev->platform_data; - - if ((1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __func__); - /* FIXME something to prod here? */ - } else { - pr_debug("%s: off\n", __func__); - /* FIXME something to prod here? */ + if (ctrl & NAND_ALE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE; + + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); } -static struct pxamci_platform_data balloon3_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .setpower = balloon3_mci_setpower, -}; +static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip < 0 || chip > 3) + return; -static int balloon3_udc_is_connected(void) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 | + BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | + BALLOON3_NAND_CONTROL_FLCE3; + + /* Deassert correct nCE line */ + balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip); + + __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); +} + +static int balloon3_nand_probe(struct platform_device *pdev) { - pr_debug("%s: udc connected\n", __func__); - return 1; + void __iomem *temp_map; + uint16_t ver; + int ret; + + __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG); + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver > 0x0201) + pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. " + "NAND support might be broken in this version!", ver); + + /* Power up the NAND chips */ + ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND"); + if (ret) + goto err1; + + ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1); + if (ret) + goto err2; + + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1); + + /* Deassert all nCE lines and write protect line */ + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); + return 0; + +err2: + gpio_free(BALLOON3_GPIO_RUN_NAND); +err1: + return ret; } -static void balloon3_udc_command(int cmd) +static void balloon3_nand_remove(struct platform_device *pdev) { - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE); - pr_debug("%s: connect\n", __func__); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~UP2OCR_DPPUE; - pr_debug("%s: disconnect\n", __func__); - break; - } + /* Power down the NAND chips */ + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0); + gpio_free(BALLOON3_GPIO_RUN_NAND); } -static struct pxa2xx_udc_mach_info balloon3_udc_info = { - .udc_is_connected = balloon3_udc_is_connected, - .udc_command = balloon3_udc_command, +static struct mtd_partition balloon3_partition_info[] = { + [0] = { + .name = "Boot", + .offset = 0, + .size = SZ_4M, + }, + [1] = { + .name = "RootFS", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, }; -static struct pxaficp_platform_data balloon3_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, -}; +static const char *balloon3_part_probes[] = { "cmdlinepart", NULL }; -static unsigned long balloon3_ohci_pin_config[] = { - GPIO88_USBH1_PWR, - GPIO89_USBH1_PEN, +struct platform_nand_data balloon3_nand_pdata = { + .chip = { + .nr_chips = 4, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(balloon3_partition_info), + .partitions = balloon3_partition_info, + .chip_delay = 50, + .part_probe_types = balloon3_part_probes, + }, + .ctrl = { + .hwcontrol = 0, + .dev_ready = 0, + .select_chip = balloon3_nand_select_chip, + .cmd_ctrl = balloon3_nand_cmd_ctl, + .probe = balloon3_nand_probe, + .remove = balloon3_nand_remove, + }, }; -static struct pxaohci_platform_data balloon3_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, +static struct resource balloon3_nand_resource[] = { + [0] = { + .start = BALLOON3_NAND_BASE, + .end = BALLOON3_NAND_BASE + 0x4, + .flags = IORESOURCE_MEM, + }, }; -static unsigned long balloon3_pin_config[] __initdata = { - /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* Wakeup GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, - - /* NAND & IDLE LED GPIOs */ - GPIO9_GPIO, - GPIO10_GPIO, +static struct platform_device balloon3_nand = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(balloon3_nand_resource), + .resource = balloon3_nand_resource, + .id = -1, + .dev = { + .platform_data = &balloon3_nand_pdata, + } }; -static struct gpio_led balloon3_gpio_leds[] = { +static void __init balloon3_nand_init(void) +{ + platform_device_register(&balloon3_nand); +} +#else +static inline void balloon3_nand_init(void) {} +#endif + +/****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply balloon3_max1587a_consumers[] = { { - .name = "balloon3:green:idle", - .default_trigger = "heartbeat", - .gpio = BALLOON3_GPIO_LED_IDLE, - .active_low = 1, + .supply = "vcc_core", + } +}; + +static struct regulator_init_data balloon3_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, + .consumer_supplies = balloon3_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers), +}; + +static struct max1586_subdev_data balloon3_max1587a_subdevs[] = { { - .name = "balloon3:green:nand", - .default_trigger = "nand-disk", - .gpio = BALLOON3_GPIO_LED_NAND, - .active_low = 1, - }, + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &balloon3_max1587a_v3_info, + } }; -static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = { - .leds = balloon3_gpio_leds, - .num_leds = ARRAY_SIZE(balloon3_gpio_leds), +static struct max1586_platform_data balloon3_max1587a_info = { + .subdevs = balloon3_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ }; -static struct platform_device balloon3led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &balloon3_gpio_leds_platform_data, +static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &balloon3_max1587a_info, }, }; -static void __init balloon3_init(void) +static void __init balloon3_pmic_init(void) { - pr_info("Initialising Balloon3\n"); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info)); +} +#else +static inline void balloon3_pmic_init(void) {} +#endif - /* system bus arbiter setting - * - Core_Park - * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 - */ +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init balloon3_init(void) +{ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - pxa_set_i2c_info(NULL); - if (balloon3_has(BALLOON3_FEATURE_AUDIO)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); - pxa_set_ac97_info(NULL); - } - - if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); - gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, - "LCD Backlight Power"); - gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); - set_pxa_fb_info(&balloon3_pxafb_info); - } - - if (balloon3_has(BALLOON3_FEATURE_MMC)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); - pxa_set_mci_info(&balloon3_mci_platform_data); - } - pxa_set_ficp_info(&balloon3_ficp_platform_data); - if (balloon3_has(BALLOON3_FEATURE_OHCI)) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config)); - pxa_set_ohci_info(&balloon3_ohci_platform_data); - } - pxa_set_udc_info(&balloon3_udc_info); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); - - platform_device_register(&balloon3led_device); + balloon3_i2c_init(); + balloon3_irda_init(); + balloon3_lcd_init(); + balloon3_leds_init(); + balloon3_mmc_init(); + balloon3_nand_init(); + balloon3_nor_init(); + balloon3_pmic_init(); + balloon3_ts_init(); + balloon3_udc_init(); + balloon3_uhc_init(); } static struct map_desc balloon3_io_desc[] __initdata = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index fdda6be6c391ea9d094aea6d7d52935e91d49c98..c70e6c2f4e7c47daf9c8a595bf6fafd11f2971d7 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -689,6 +689,7 @@ static void __init cm_x300_init_da9030(void) { pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info); i2c_register_board_info(1, &cm_x300_pmic_info, 1); + set_irq_wake(IRQ_WAKEUP0, 1); } static void __init cm_x300_init_wi2wi(void) @@ -745,9 +746,10 @@ static void __init cm_x300_init(void) { cm_x300_init_mfp(); - pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + if (cpu_is_pxa300()) + pxa_set_ffuart_info(NULL); cm_x300_init_da9030(); cm_x300_init_dm9000(); diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c new file mode 100644 index 0000000000000000000000000000000000000000..0f3b632c3b14f52ad182597198088040420f79c5 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c + * + * Support for Toradex PXA270 based Colibri Evaluation Carrier Board + * Daniel Mack + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init colibri_pxa270_mmc_init(void) +{ + pxa_set_mci_info(&colibri_pxa270_mci_platform_data); +} +#else +static inline void colibri_pxa270_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int colibri_pxa270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data colibri_pxa270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = colibri_pxa270_ohci_init, +}; + +static void __init colibri_pxa270_uhc_init(void) +{ + pxa_set_ohci_info(&colibri_pxa270_ohci_info); +} +#else +static inline void colibri_pxa270_uhc_init(void) {} +#endif + +void __init colibri_pxa270_evalboard_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + colibri_pxa270_mmc_init(); + colibri_pxa270_uhc_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c new file mode 100644 index 0000000000000000000000000000000000000000..37f0f3ed7c612d87b8974609da07bcfb4511c4e6 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -0,0 +1,272 @@ +/* + * linux/arch/arm/mach-pxa/income.c + * + * Support for Income s.r.o. SH-Dmaster PXA270 SBC + * + * Copyright (C) 2010 + * Marek Vasut + * Pavel Revak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "devices.h" +#include "generic.h" + +#define GPIO114_INCOME_ETH_IRQ (114) +#define GPIO0_INCOME_SD_DETECT (0) +#define GPIO0_INCOME_SD_RO (1) +#define GPIO54_INCOME_LED_A (54) +#define GPIO55_INCOME_LED_B (55) +#define GPIO113_INCOME_TS_IRQ (113) + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t income_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + GPIO1_GPIO, /* SD read-only */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* BFUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* LED */ + GPIO54_GPIO, /* LED A */ + GPIO55_GPIO, /* LED B */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data income_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_INCOME_SD_DETECT, + .gpio_card_ro = GPIO0_INCOME_SD_RO, + .detect_delay_ms = 200, +}; + +static void __init income_mmc_init(void) +{ + pxa_set_mci_info(&income_mci_platform_data); +} +#else +static inline void income_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data income_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init income_uhc_init(void) +{ + pxa_set_ohci_info(&income_ohci_info); +} +#else +static inline void income_uhc_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led income_gpio_leds[] = { + { + .name = "income:green:leda", + .default_trigger = "none", + .gpio = GPIO54_INCOME_LED_A, + .active_low = 1, + }, + { + .name = "income:green:ledb", + .default_trigger = "none", + .gpio = GPIO55_INCOME_LED_B, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data income_gpio_led_info = { + .leds = income_gpio_leds, + .num_leds = ARRAY_SIZE(income_gpio_leds), +}; + +static struct platform_device income_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &income_gpio_led_info, + } +}; + +static void __init income_led_init(void) +{ + platform_device_register(&income_leds); +} +#else +static inline void income_led_init(void) {} +#endif + +/****************************************************************************** + * I2C + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct i2c_board_info __initdata income_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1340", 0x68), + }, { + I2C_BOARD_INFO("lm75", 0x4f), + }, +}; + +static void __init income_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs)); +} +#else +static inline void income_i2c_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info income_lcd_modes[] = { +{ + .pixclock = 144700, + .xres = 320, + .yres = 240, + .bpp = 32, + .depth = 18, + + .left_margin = 10, + .right_margin = 10, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 20, + .vsync_len = 2, + + .sync = FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info income_lcd_screen = { + .modes = income_lcd_modes, + .num_modes = ARRAY_SIZE(income_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init income_lcd_init(void) +{ + set_pxa_fb_info(&income_lcd_screen); +} +#else +static inline void income_lcd_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) +static struct platform_pwm_backlight_data income_backlight_data = { + .pwm_id = 0, + .max_brightness = 0x3ff, + .dft_brightness = 0x1ff, + .pwm_period_ns = 1000000, +}; + +static struct platform_device income_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &income_backlight_data, + }, +}; + +static void __init income_pwm_init(void) +{ + platform_device_register(&income_backlight); +} +#else +static inline void income_pwm_init(void) {} +#endif + +void __init colibri_pxa270_income_boardinit(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + income_mmc_init(); + income_uhc_init(); + income_led_init(); + income_i2c_init(); + income_lcd_init(); + income_pwm_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 061c45316de8cb732b20ac43babefd9735c88c8a..98673ac6efd0d74f66dc270a67e97e7c874ecf97 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -3,6 +3,7 @@ * * Support for Toradex PXA270 based Colibri module * Daniel Mack + * Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -10,49 +11,55 @@ */ #include -#include -#include -#include #include -#include -#include -#include +#include #include #include #include -#include -#include -#include -#include -#include +#include +#include +#include + #include -#include -#include #include +#include +#include -#include +#include #include +#include -#include "generic.h" #include "devices.h" +#include "generic.h" -/* - * GPIO configuration - */ +/****************************************************************************** + * Pin configuration + ******************************************************************************/ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { + /* Ethernet */ GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* Touchscreen IRQ */ }; -/* - * NOR flash - */ +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition colibri_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, - .mask_flags = MTD_WRITEABLE /* force read-only */ + .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "Kernel", .offset = 0x00040000, @@ -90,50 +97,113 @@ static struct platform_device colibri_pxa270_flash_device = { .num_resources = 1, }; -/* - * DM9000 Ethernet - */ -#if defined(CONFIG_DM9000) -static struct resource dm9000_resources[] = { - [0] = { - .start = COLIBRI_PXA270_ETH_PHYS, - .end = COLIBRI_PXA270_ETH_PHYS + 3, +static void __init colibri_pxa270_nor_init(void) +{ + platform_device_register(&colibri_pxa270_flash_device); +} +#else +static inline void colibri_pxa270_nor_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource colibri_pxa270_dm9000_resources[] = { + { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 3, .flags = IORESOURCE_MEM, }, - [1] = { - .start = COLIBRI_PXA270_ETH_PHYS + 4, - .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500, + { + .start = PXA_CS2_PHYS + 4, + .end = PXA_CS2_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, - [2] = { - .start = COLIBRI_PXA270_ETH_IRQ, - .end = COLIBRI_PXA270_ETH_IRQ, + { + .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; -static struct platform_device dm9000_device = { +static struct platform_device colibri_pxa270_dm9000_device = { .name = "dm9000", .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, + .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources), + .resource = colibri_pxa270_dm9000_resources, }; -#endif /* CONFIG_DM9000 */ -static struct platform_device *colibri_pxa270_devices[] __initdata = { - &colibri_pxa270_flash_device, -#if defined(CONFIG_DM9000) - &dm9000_device, +static void __init colibri_pxa270_eth_init(void) +{ + platform_device_register(&colibri_pxa270_dm9000_device); +} +#else +static inline void colibri_pxa270_eth_init(void) {} #endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { + .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), +}; + +static struct platform_device colibri_pxa270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &colibri_pxa270_ucb1400_pdata, + }, }; +static void __init colibri_pxa270_tsc_init(void) +{ + pxa_set_ac97_info(&colibri_pxa270_ac97_pdata); + platform_device_register(&colibri_pxa270_ucb1400_device); +} +#else +static inline void colibri_pxa270_tsc_init(void) {} +#endif + +static int colibri_pxa270_baseboard; +core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444); + static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices)); + + colibri_pxa270_nor_init(); + colibri_pxa270_eth_init(); + colibri_pxa270_tsc_init(); + + switch (colibri_pxa270_baseboard) { + case COLIBRI_PXA270_EVALBOARD: + colibri_pxa270_evalboard_init(); + break; + case COLIBRI_PXA270_INCOME: + colibri_pxa270_income_boardinit(); + break; + default: + printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", + colibri_pxa270_baseboard); + } +} + +/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either + * with the INCOME mach type or with COLIBRI and the kernel parameter + * "colibri_pxa270_baseboard=1" + */ +static void __init colibri_pxa270_income_init(void) +{ + colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME; + colibri_pxa270_init(); } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") @@ -146,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .timer = &pxa_timer, MACHINE_END +MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .init_machine = colibri_pxa270_income_init, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ae835fad7d10a7b644ff725b2948688a39a3cd43..99e850d847103eab977badf1d7a2491df942f687 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,8 @@ #include #include #include +#include +#include #include "generic.h" #include "devices.h" @@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void) static inline void colibri_pxa320_init_ohci(void) {} #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { + .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), + .gpio_pullup = -1, +}; + +static struct platform_device colibri_pxa320_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &colibri_pxa320_gpio_vbus_info, + }, +}; + +static void colibri_pxa320_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR = UP2OCR_HXOE; +} + +static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = { + .udc_command = colibri_pxa320_udc_command, + .gpio_pullup = -1, +}; + +static void __init colibri_pxa320_init_udc(void) +{ + pxa_set_udc_info(&colibri_pxa320_udc_info); + platform_device_register(&colibri_pxa320_gpio_vbus); +} +#else +static inline void colibri_pxa320_init_udc(void) {} +#endif + static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = { GPIO22_MMC1_CLK, GPIO23_MMC1_CMD, @@ -212,6 +251,7 @@ void __init colibri_pxa320_init(void) colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config), mfp_to_gpio(MFP_PIN_GPIO28)); colibri_pxa320_init_uart(); + colibri_pxa320_init_udc(); } MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 461ba4080155414d6e64b8d0f61f4dcee49a24fa..3fb0fc09908076b24ed5f7b0200da4afcda12788 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -50,14 +50,13 @@ #include #include #include -#include +#include #include #include #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long corgi_pin_config[] __initdata = { /* Static Memory I/O */ @@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = { .num_devs = 1, }; -EXPORT_SYMBOL(corgiscoop_device); - static struct w100_mem_info corgi_fb_mem = { .ext_cntl = 0x00040003, .sdram_mode_reg = 0x00650021, diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 3f1dc74ac048fffc96c049fa9ae28ebbdef950e4..29034778bfdaa03f2cc99608ac17de638ffa0c14 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -23,12 +23,11 @@ #include #include -#include #include #include +#include #include "generic.h" -#include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type) case SHARPSL_STATUS_ACIN: return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); case SHARPSL_STATUS_LOCK: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull); case SHARPSL_STATUS_FATAL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal); case SHARPSL_ACIN_VOLT: return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); case SHARPSL_BATT_TEMP: @@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .should_wakeup = corgi_should_wakeup, #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, -#elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, #endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 8e10db148f1b2cccdc70b07ba0785b280a80dcfc..65447dc736c2fd5b3f0fd4e3ce4c46c3c9711dc3 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include #include +#include #include #include #include @@ -31,6 +32,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data) dev_err(&dev->dev, "unable to register device: %d\n", ret); } +static struct resource pxa_resource_pmu = { + .start = IRQ_PMU, + .end = IRQ_PMU, + .flags = IORESOURCE_IRQ, +}; + +struct platform_device pxa_device_pmu = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pxa_resource_pmu, + .num_resources = 1, +}; + static struct resource pxamci_resources[] = { [0] = { .start = 0x41100000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 93817d99761e902a42bd610d5b060e49095b0450..50353ea49ba455bc856d371f1e6170861337f8c4 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,3 +1,4 @@ +extern struct platform_device pxa_device_pmu; extern struct platform_device pxa_device_mci; extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c deleted file mode 100644 index 8fde3387279d43662a16262c787716e3df3fd3cd..0000000000000000000000000000000000000000 --- a/arch/arm/mach-pxa/e330.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Hardware definitions for the Toshiba e330 PDAs - * - * Copyright (c) 2003 Ian Molton - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* -------------------- e330 tc6387xb parameters -------------------- */ - -static struct tc6387xb_platform_data e330_tc6387xb_info = { - .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, -}; - -static struct platform_device e330_tc6387xb_device = { - .name = "tc6387xb", - .id = -1, - .dev = { - .platform_data = &e330_tc6387xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* --------------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e330_tc6387xb_device, -}; - -static void __init e330_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - eseries_register_clks(); - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E330, "Toshiba e330") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e330_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c deleted file mode 100644 index f50f055f57208e45dfda5087dc5c8ce8c152ce9d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-pxa/e350.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Hardware definitions for the Toshiba e350 PDAs - * - * Copyright (c) 2003 Ian Molton - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* -------------------- e350 t7l66xb parameters -------------------- */ - -static struct t7l66xb_platform_data e350_t7l66xb_info = { - .irq_base = IRQ_BOARD_START, - .enable = &eseries_tmio_enable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, -}; - -static struct platform_device e350_t7l66xb_device = { - .name = "t7l66xb", - .id = -1, - .dev = { - .platform_data = &e350_t7l66xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ---------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e350_t7l66xb_device, -}; - -static void __init e350_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - eseries_register_clks(); - eseries_get_tmio_gpios(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E350, "Toshiba e350") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e350_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c deleted file mode 100644 index 55b950f128443b2eefd8f05105c07af84e7f2168..0000000000000000000000000000000000000000 --- a/arch/arm/mach-pxa/e400.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "generic.h" -#include "eseries.h" -#include "clock.h" - -/* ------------------------ E400 LCD definitions ------------------------ */ - -static struct pxafb_mode_info e400_pxafb_mode_info = { - .pixclock = 140703, - .xres = 240, - .yres = 320, - .bpp = 16, - .hsync_len = 4, - .left_margin = 28, - .right_margin = 8, - .vsync_len = 3, - .upper_margin = 5, - .lower_margin = 6, - .sync = 0, -}; - -static struct pxafb_mach_info e400_pxafb_mach_info = { - .modes = &e400_pxafb_mode_info, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .lccr3 = 0, - .pxafb_backlight_power = NULL, -}; - -/* ------------------------ E400 MFP config ----------------------------- */ - -static unsigned long e400_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO12_32KHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - - /* TMIO controller */ - GPIO19_GPIO, /* t7l66xb #PCLR */ - GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -/* ---------------------------------------------------------------------- */ - -static struct mtd_partition partition_a = { - .name = "Internal NAND flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, -}; - -static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; - -static struct nand_bbt_descr e400_t7l66xb_nand_bbt = { - .options = 0, - .offs = 4, - .len = 2, - .pattern = scan_ff_pattern -}; - -static struct tmio_nand_data e400_t7l66xb_nand_config = { - .num_partitions = 1, - .partition = &partition_a, - .badblock_pattern = &e400_t7l66xb_nand_bbt, -}; - -static struct t7l66xb_platform_data e400_t7l66xb_info = { - .irq_base = IRQ_BOARD_START, - .enable = &eseries_tmio_enable, - .suspend = &eseries_tmio_suspend, - .resume = &eseries_tmio_resume, - - .nand_data = &e400_t7l66xb_nand_config, -}; - -static struct platform_device e400_t7l66xb_device = { - .name = "t7l66xb", - .id = -1, - .dev = { - .platform_data = &e400_t7l66xb_info, - }, - .num_resources = 2, - .resource = eseries_tmio_resources, -}; - -/* ---------------------------------------------------------- */ - -static struct platform_device *devices[] __initdata = { - &e400_t7l66xb_device, -}; - -static void __init e400_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - /* Fixme - e400 may have a switched clock */ - eseries_register_clks(); - eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); -} - -MACHINE_START(E400, "Toshiba e400") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e400_init, - .timer = &pxa_timer, -MACHINE_END - diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c deleted file mode 100644 index d578021d1a10039752ac9da211e3ad4911f909db..0000000000000000000000000000000000000000 --- a/arch/arm/mach-pxa/e740.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Hardware definitions for the Toshiba eseries PDAs - * - * Copyright (c) 2003 Ian Molton - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include