Merge "hal: move audio specific config files to HAL" (59fbbbaa) · Commits · e / devices / samsung / android_hardware_qcom_audio

configs/msm8996/aanc_tuning_mixer.txt

0 → 100644

+143 −0

Original line number	Diff line number	Diff line
		#ANC_TEST_P_PATH_MIC_STEREO Capture
		acdb_dev_id:85
		!Capture
		Txdevice:0

		enable
		AIF1_CAP Mixer SLIM TX7:1
		AIF1_CAP Mixer SLIM TX8:1
		SLIM TX7 MUX:DEC7
		ADC MUX7:DMIC
		DMIC MUX7:DMIC3
		SLIM TX8 MUX:DEC8
		ADC MUX8:DMIC
		DMIC MUX8:DMIC2
		SLIM_0_TX Channels:Two
		MultiMedia1 Mixer SLIM_0_TX:1

		disable
		MultiMedia1 Mixer SLIM_0_TX:0
		AIF1_CAP Mixer SLIM TX7:0
		AIF1_CAP Mixer SLIM TX8:0
		SLIM TX7 MUX:ZERO
		SLIM TX8 MUX:ZERO
		DMIC MUX7:ZERO
		DMIC MUX8:ZERO

		#ANC_TEST_S_PATH_MIC_STEREO Capture
		acdb_dev_id:88
		!Capture
		Txdevice:0

		enable
		AIF1_CAP Mixer SLIM TX7:1
		AIF1_CAP Mixer SLIM TX8:1
		SLIM TX7 MUX:DEC7
		ADC MUX7:ANC_FB_TUNE1
		ADC MUX10:DMIC
		DMIC MUX10:DMIC2
		SLIM TX8 MUX:DEC8
		ADC MUX8:ANC_FB_TUNE2
		ADC MUX12:DMIC
		DMIC MUX12:DMIC2
		ANC0 FB MUX:ANC_IN_EAR
		ANC EAR Enable Switch:1
		SLIM_0_TX Channels:Two
		MultiMedia1 Mixer SLIM_0_TX:1

		disable
		MultiMedia1 Mixer SLIM_0_TX:0
		AIF1_CAP Mixer SLIM TX7:0
		AIF1_CAP Mixer SLIM TX8:0
		SLIM TX7 MUX:ZERO
		SLIM TX8 MUX:ZERO
		ADC MUX7:DMIC
		ADC MUX8:DMIC
		DMIC MUX10:ZERO
		DMIC MUX12:ZERO
		ANC0 FB MUX:ZERO
		ANC EAR Enable Switch:0


		#ANC_TEST_E_PATH_MIC_STEREO Capture
		acdb_dev_id:91
		!Capture
		Txdevice:0

		enable
		AIF1_CAP Mixer SLIM TX7:1
		AIF1_CAP Mixer SLIM TX8:1
		SLIM TX7 MUX:DEC7
		ADC MUX7:ANC_FB_TUNE1
		ADC MUX10:DMIC
		DMIC MUX10:DMIC3
		SLIM TX8 MUX:DEC8
		ADC MUX8:ANC_FB_TUNE2
		ADC MUX12:DMIC
		DMIC MUX12:DMIC3
		ANC0 FB MUX:ANC_IN_EAR
		ANC EAR Enable Switch:1
		SLIM_0_TX Channels:Two
		MultiMedia1 Mixer SLIM_0_TX:1

		disable
		MultiMedia1 Mixer SLIM_0_TX:0
		AIF1_CAP Mixer SLIM TX7:0
		AIF1_CAP Mixer SLIM TX8:0
		SLIM TX7 MUX:ZERO
		SLIM TX8 MUX:ZERO
		ADC MUX7:DMIC
		ADC MUX8:DMIC
		DMIC MUX10:ZERO
		DMIC MUX12:ZERO
		ANC0 FB MUX:ZERO
		ANC EAR Enable Switch:0


		#ANC_TEST_S_PATH_HANDSET_SPKR_ANC_MONO
		acdb_dev_id:86
		!Playback
		Rxdevice:0

		enable
		ANC Function:ON
		SLIM RX0 MUX:AIF_MIX1_PB
		SLIM_0_RX Channels:One
		RX INT0_1 MIX1 INP0:RX0
		RX INT0 DEM MUX:CLSH_DSM_OUT
		RX0 Digital Volume:87
		ANC Slot:7
		EAR PA Gain:G_6_DB
		SLIMBUS_0_RX Audio Mixer MultiMedia1:1

		disable
		SLIMBUS_0_RX Audio Mixer MultiMedia1:0
		ANC Slot:0
		SLIM RX0 MUX:ZERO
		RX INT0_1 MIX1 INP0:ZERO
		RX0 Digital Volume:0
		ANC Function:OFF

		#ANC_TEST_E_PATH_HANDSET_SPKR_ANC_MONO
		acdb_dev_id:89
		!Playback
		Rxdevice:0

		enable
		ANC Function:ON
		SLIM RX0 MUX:AIF_MIX1_PB
		SLIM_0_RX Channels:One
		RX INT0_1 MIX1 INP0:RX0
		RX INT0 DEM MUX:CLSH_DSM_OUT
		RX0 Digital Volume:87
		ANC Slot:8
		EAR PA Gain:G_6_DB
		SLIMBUS_0_RX Audio Mixer MultiMedia1:1

		disable
		SLIMBUS_0_RX Audio Mixer MultiMedia1:0
		ANC Slot:0
		SLIM RX0 MUX:ZERO
		RX INT0_1 MIX1 INP0:ZERO
		RX0 Digital Volume:0
		ANC Function:OFF

configs/msm8996/audio_effects.conf

0 → 100644

+349 −0

Original line number	Diff line number	Diff line
		# List of effect libraries to load. Each library element must contain a "path" element
		# giving the full path of the library .so file.
		# libraries {
		# <lib name> {
		# path <lib path>
		# }
		# }
		libraries {
		bundle {
		path /system/lib/soundfx/libbundlewrapper.so
		}
		reverb {
		path /system/lib/soundfx/libreverbwrapper.so
		}
		qcbassboost {
		path /vendor/lib/soundfx/libqcbassboost.so
		}
		qcvirt {
		path /vendor/lib/soundfx/libqcvirt.so
		}
		qcreverb {
		path /vendor/lib/soundfx/libqcreverb.so
		}
		visualizer_sw {
		path /system/lib/soundfx/libvisualizer.so
		}
		visualizer_hw {
		path /system/lib/soundfx/libqcomvisualizer.so
		}
		downmix {
		path /system/lib/soundfx/libdownmix.so
		}
		loudness_enhancer {
		path /system/lib/soundfx/libldnhncr.so
		}
		proxy {
		path /system/lib/soundfx/libeffectproxy.so
		}
		offload_bundle {
		path /system/lib/soundfx/libqcompostprocbundle.so
		}
		audio_pre_processing {
		path /system/lib/soundfx/libqcomvoiceprocessing.so
		}
		loudness_enhancer {
		path /system/lib/soundfx/libldnhncr.so
		}
		volume_listener {
		path /system/lib/soundfx/libvolumelistener.so
		}
		}

		# Default pre-processing library. Add to audio_effect.conf "libraries" section if
		# audio HAL implements support for default software audio pre-processing effects
		#
		# pre_processing {
		# path /system/lib/soundfx/libaudiopreprocessing.so
		# }

		# list of effects to load. Each effect element must contain a "library" and a "uuid" element.
		# The value of the "library" element must correspond to the name of one library element in the
		# "libraries" element.
		# The name of the effect element is indicative, only the value of the "uuid" element
		# designates the effect.
		# The uuid is the implementation specific UUID as specified by the effect vendor. This is not the
		# generic effect type UUID.
		# effects {
		# <fx name> {
		# library <lib name>
		# uuid <effect uuid>
		# }
		# ...
		# }

		effects {

		# additions for the proxy implementation
		# Proxy implementation
		#effectname {
		#library proxy
		#uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

		# SW implemetation of the effect. Added as a node under the proxy to
		# indicate this as a sub effect.
		#libsw {
		#library libSW
		#uuid yyyyyyyy-yyyy-yyyy-yyyy-yyyyyyyyyyyy
		#} End of SW effect

		# HW implementation of the effect. Added as a node under the proxy to
		# indicate this as a sub effect.
		#libhw {
		#library libHW
		#uuid zzzzzzzz-zzzz-zzzz-zzzz-zzzzzzzzzzzz
		#}End of HW effect
		#} End of effect proxy

		bassboost {
		library proxy
		uuid 14804144-a5ee-4d24-aa88-0002a5d5c51b

		libsw {
		library qcbassboost
		uuid 23aca180-44bd-11e2-bcfd-0800200c9a66
		}

		libhw {
		library offload_bundle
		uuid 2c4a8c24-1581-487f-94f6-0002a5d5c51b
		}
		}
		virtualizer {
		library proxy
		uuid d3467faa-acc7-4d34-acaf-0002a5d5c51b

		libsw {
		library qcvirt
		uuid e6c98a16-22a3-11e2-b87b-f23c91aec05e
		}

		libhw {
		library offload_bundle
		uuid 509a4498-561a-4bea-b3b1-0002a5d5c51b
		}
		}
		equalizer {
		library proxy
		uuid c8e70ecd-48ca-456e-8a4f-0002a5d5c51b

		libsw {
		library bundle
		uuid ce772f20-847d-11df-bb17-0002a5d5c51b
		}

		libhw {
		library offload_bundle
		uuid a0dac280-401c-11e3-9379-0002a5d5c51b
		}
		}
		volume {
		library bundle
		uuid 119341a0-8469-11df-81f9-0002a5d5c51b
		}
		reverb_env_aux {
		library proxy
		uuid 48404ac9-d202-4ccc-bf84-0002a5d5c51b

		libsw {
		library qcreverb
		uuid a8c1e5f3-293d-43cd-95ec-d5e26c02e217
		}

		libhw {
		library offload_bundle
		uuid 79a18026-18fd-4185-8233-0002a5d5c51b
		}
		}
		reverb_env_ins {
		library proxy
		uuid b707403a-a1c1-4291-9573-0002a5d5c51b

		libsw {
		library qcreverb
		uuid 791fff8b-8129-4655-83a4-59bc61034c3a
		}

		libhw {
		library offload_bundle
		uuid eb64ea04-973b-43d2-8f5e-0002a5d5c51b
		}
		}
		reverb_pre_aux {
		library proxy
		uuid 1b78f587-6d1c-422e-8b84-0002a5d5c51b

		libsw {
		library qcreverb
		uuid 53ef1db5-c0c0-445b-b060-e34d20ebb70a
		}

		libhw {
		library offload_bundle
		uuid 6987be09-b142-4b41-9056-0002a5d5c51b
		}
		}
		reverb_pre_ins {
		library proxy
		uuid f3e178d2-ebcb-408e-8357-0002a5d5c51b

		libsw {
		library qcreverb
		uuid b08a0e38-22a5-11e2-b87b-f23c91aec05e
		}

		libhw {
		library offload_bundle
		uuid aa2bebf6-47cf-4613-9bca-0002a5d5c51b
		}
		}
		visualizer {
		library proxy
		uuid 1d0a1a53-7d5d-48f2-8e71-27fbd10d842c

		libsw {
		library visualizer_sw
		uuid d069d9e0-8329-11df-9168-0002a5d5c51b
		}

		libhw {
		library visualizer_hw
		uuid 7a8044a0-1a71-11e3-a184-0002a5d5c51b
		}
		}
		downmix {
		library downmix
		uuid 93f04452-e4fe-41cc-91f9-e475b6d1d69f
		}
		hw_acc {
		library offload_bundle
		uuid 7d1580bd-297f-4683-9239-e475b6d1d69f
		}
		loudness_enhancer {
		library loudness_enhancer
		uuid fa415329-2034-4bea-b5dc-5b381c8d1e2c
		}
		aec {
		library audio_pre_processing
		uuid 0f8d0d2a-59e5-45fe-b6e4-248c8a799109
		}
		ns {
		library audio_pre_processing
		uuid 1d97bb0b-9e2f-4403-9ae3-58c2554306f8
		}
		music_helper {
		library volume_listener
		uuid 08b8b058-0590-11e5-ac71-0025b32654a0
		}
		ring_helper {
		library volume_listener
		uuid 0956df94-0590-11e5-bdbe-0025b32654a0
		}
		alarm_helper {
		library volume_listener
		uuid 09f303e2-0590-11e5-8fdb-0025b32654a0
		}
		# voice_helper is called when stream type is voice_call in VoIP usecase
		voice_helper {
		library volume_listener
		uuid 0ace5c08-0590-11e5-ae9e-0025b32654a0
		}
		notification_helper {
		library volume_listener
		uuid 0b776dde-0590-11e5-81ba-0025b32654a0
		}
		}

		# additional effect from vendor
		# UUID generated using version 1

		output_session_processing {
		music {
		music_helper {
		}
		}
		ring {
		ring_helper {
		}
		}
		alarm {
		alarm_helper {
		}
		}
		# stream type voice_call is used for VoIP call
		voice_call {
		voice_helper {
		}
		}
		notification {
		notification_helper {
		}
		}
		}

		# Added aec, ns effects for voice_communication, which are supported by the board

		pre_processing {
		voice_communication {
		aec {
		}
		ns {
		}
		}
		}

		# Default pre-processing effects. Add to audio_effect.conf "effects" section if
		# audio HAL implements support for them.
		#
		# agc {
		# library pre_processing
		# uuid aa8130e0-66fc-11e0-bad0-0002a5d5c51b
		# }
		# aec {
		# library pre_processing
		# uuid bb392ec0-8d4d-11e0-a896-0002a5d5c51b
		# }
		# ns {
		# library pre_processing
		# uuid c06c8400-8e06-11e0-9cb6-0002a5d5c51b
		# }

		# Audio preprocessor configurations.
		# The pre processor configuration consists in a list of elements each describing
		# pre processor settings for a given input source. Valid input source names are:
		# "mic", "camcorder", "voice_recognition", "voice_communication"
		# Each input source element contains a list of effects elements. The name of the effect
		# element must be the name of one of the effects in the "effects" list of the file.
		# Each effect element may optionally contain a list of parameters and their
		# default value to apply when the pre processor effect is created.
		# A parameter is defined by a "param" element and a "value" element. Each of these elements
		# consists in one or more elements specifying a type followed by a value.
		# The types defined are: "int", "short", "float", "bool" and "string"
		# When both "param" and "value" are a single int, a simple form is allowed where just
		# the param and value pair is present in the parameter description
		# pre_processing {
		# <input source name> {
		# <fx name> {
		# <param 1 name> {
		# param {
		# int\|short\|float\|bool\|string <value>
		# [ int\|short\|float\|bool\|string <value> ]
		# ...
		# }
		# value {
		# int\|short\|float\|bool\|string <value>
		# [ int\|short\|float\|bool\|string <value> ]
		# ...
		# }
		# }
		# <param 2 name > {<param> <value>}
		# ...
		# }
		# ...
		# }
		# ...
		# }

		#
		# TODO: add default audio pre processor configurations after debug and tuning phase
		#

configs/msm8996/audio_output_policy.conf

0 → 100644

+56 −0

Original line number	Diff line number	Diff line
		# List of profiles for the output device session where stream is routed.
		# A stream opened with the inputs attributes which match the "flags" and
		# "formats" as specified in the profile is routed to a device at
		# sample rate specified under "sampling_rates" and bit width under
		# "bit_width" and the topology extracted from the acdb data against
		# the "app_type".
		#
		# the flags and formats are specified using the strings corresponding to
		# enums in audio.h and audio_policy.h. They are concatenated with "\|"
		# without space or "\n".
		# the flags and formats should match the ones in "audio_policy.conf"

		outputs {
		default {
		flags AUDIO_OUTPUT_FLAG_PRIMARY
		formats AUDIO_FORMAT_PCM_16_BIT
		sampling_rates 48000
		bit_width 16
		app_type 69937
		}
		deep_buffer {
		flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER
		formats AUDIO_FORMAT_PCM_16_BIT
		sampling_rates 48000
		bit_width 16
		app_type 69936
		}
		direct {
		flags AUDIO_OUTPUT_FLAG_DIRECT
		formats AUDIO_FORMAT_PCM_16_BIT
		sampling_rates 48000
		bit_width 16
		app_type 69936
		}
		direct_pcm {
		flags AUDIO_OUTPUT_FLAG_DIRECT\|AUDIO_OUTPUT_FLAG_DIRECT_PCM
		formats AUDIO_FORMAT_PCM_16_BIT
		sampling_rates 44100\|48000\|96000\|192000
		bit_width 16
		app_type 69936
		}
		compress_offload_16 {
		flags AUDIO_OUTPUT_FLAG_DIRECT\|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD\|AUDIO_OUTPUT_FLAG_NON_BLOCKING
		formats AUDIO_FORMAT_MP3\|AUDIO_FORMAT_PCM_16_BIT_OFFLOAD\|AUDIO_FORMAT_PCM_24_BIT_OFFLOAD\|AUDIO_FORMAT_FLAC\|AUDIO_FORMAT_ALAC\|AUDIO_FORMAT_APE\|AUDIO_FORMAT_AAC_LC\|AUDIO_FORMAT_AAC_HE_V1\|AUDIO_FORMAT_AAC_HE_V2\|AUDIO_FORMAT_WMA\|AUDIO_FORMAT_WMA_PRO\|AUDIO_FORMAT_VORBIS\|AUDIO_FORMAT_AAC_ADTS_LC\|AUDIO_FORMAT_AAC_ADTS_HE_V1\|AUDIO_FORMAT_AAC_ADTS_HE_V2
		sampling_rates 44100\|48000
		bit_width 16
		app_type 69936
		}
		compress_offload_24 {
		flags AUDIO_OUTPUT_FLAG_DIRECT\|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD\|AUDIO_OUTPUT_FLAG_NON_BLOCKING
		formats AUDIO_FORMAT_PCM_24_BIT_OFFLOAD\|AUDIO_FORMAT_FLAC\|AUDIO_FORMAT_ALAC\|AUDIO_FORMAT_APE\|AUDIO_FORMAT_VORBIS\|AUDIO_FORMAT_WMA\|AUDIO_FORMAT_WMA_PRO
		sampling_rates 44100\|48000\|96000\|192000
		bit_width 24
		app_type 69940
		}
		}

configs/msm8996/audio_platform_info.xml

0 → 100644

+43 −0

Original line number	Diff line number	Diff line
		<?xml version="1.0" encoding="ISO-8859-1"?>
		<!-- Copyright (c) 2014, 2016, The Linux Foundation. All rights reserved. -->
		<!-- -->
		<!-- Redistribution and use in source and binary forms, with or without -->
		<!-- modification, are permitted provided that the following conditions are -->
		<!-- met: -->
		<!-- * Redistributions of source code must retain the above copyright -->
		<!-- notice, this list of conditions and the following disclaimer. -->
		<!-- * Redistributions in binary form must reproduce the above -->
		<!-- copyright notice, this list of conditions and the following -->
		<!-- disclaimer in the documentation and/or other materials provided -->
		<!-- with the distribution. -->
		<!-- * Neither the name of The Linux Foundation nor the names of its -->
		<!-- contributors may be used to endorse or promote products derived -->
		<!-- from this software without specific prior written permission. -->
		<!-- -->
		<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
		<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
		<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
		<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
		<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
		<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
		<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
		<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
		<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
		<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
		<audio_platform_info>
		<acdb_ids>
		<device name="SND_DEVICE_OUT_SPEAKER" acdb_id="15"/>
		<device name="SND_DEVICE_OUT_SPEAKER_PROTECTED" acdb_id="124"/>
		</acdb_ids>
		<bit_width_configs>
		<device name="SND_DEVICE_OUT_SPEAKER" bit_width="24"/>
		</bit_width_configs>
		<config_params>
		<param key="spkr_1_tz_name" value="wsatz.11"/>
		<param key="spkr_2_tz_name" value="wsatz.12"/>
		<!-- In the below value string, first parameter indicates size -->
		<!-- followed by perf lock options -->
		<param key="perf_lock_opts" value="4, 0x101, 0x704, 0x20F, 0x1E01"/>
		</config_params>
		</audio_platform_info>

configs/msm8996/audio_platform_info_i2s.xml

0 → 100644

+35 −0

Original line number	Diff line number	Diff line
		<?xml version="1.0" encoding="ISO-8859-1"?>
		<!-- Copyright (c) 2014, 2016, The Linux Foundation. All rights reserved. -->
		<!-- -->
		<!-- Redistribution and use in source and binary forms, with or without -->
		<!-- modification, are permitted provided that the following conditions are -->
		<!-- met: -->
		<!-- * Redistributions of source code must retain the above copyright -->
		<!-- notice, this list of conditions and the following disclaimer. -->
		<!-- * Redistributions in binary form must reproduce the above -->
		<!-- copyright notice, this list of conditions and the following -->
		<!-- disclaimer in the documentation and/or other materials provided -->
		<!-- with the distribution. -->
		<!-- * Neither the name of The Linux Foundation nor the names of its -->
		<!-- contributors may be used to endorse or promote products derived -->
		<!-- from this software without specific prior written permission. -->
		<!-- -->
		<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
		<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
		<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
		<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
		<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
		<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
		<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
		<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
		<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
		<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
		<audio_platform_info_i2s>
		<device name="SND_DEVICE_IN_HANDSET_MIC" acdb_id="8" />
		<device name="SND_DEVICE_IN_SPEAKER_MIC" acdb_id="8" />
		<device name="SND_DEVICE_IN_VOICE_SPEAKER_MIC" acdb_id="8" />
		<device name="SND_DEVICE_OUT_HANDSET" acdb_id="10" />
		<device name="SND_DEVICE_OUT_VOICE_HANDSET" acdb_id="10" />
		<device name="SND_DEVICE_OUT_SPEAKER" acdb_id="10" />
		<device name="SND_DEVICE_OUT_VOICE_SPEAKER" acdb_id="10" />
		</audio_platform_info_i2s>