Merge "hal: Add support for adaptive bitrate" (567e52ba) · Commits · e / devices / FP5 / android_hardware_qcom_audio

hal/audio_extn/a2dp.c

+375 −52

Original line number	Diff line number	Diff line
		@@ -71,10 +71,14 @@
		#define MEDIA_FMT_SBC_ALLOCATION_METHOD_LOUDNESS 0
		#define MEDIA_FMT_SBC_ALLOCATION_METHOD_SNR 1
		#define MIXER_ENC_CONFIG_BLOCK "SLIM_7_RX Encoder Config"
		#define MIXER_DEC_CONFIG_BLOCK "SLIM_7_TX Decoder Config"
		#define MIXER_ENC_BIT_FORMAT "AFE Input Bit Format"
		#define MIXER_SCRAMBLER_MODE "AFE Scrambler Mode"
		#define MIXER_SAMPLE_RATE "BT SampleRate"
		#define MIXER_SAMPLE_RATE_RX "BT SampleRate RX"
		#define MIXER_SAMPLE_RATE_TX "BT SampleRate TX"
		#define MIXER_AFE_IN_CHANNELS "AFE Input Channels"
		#define MIXER_ABR_TX_FEEDBACK_PATH "A2DP_SLIM7_UL_HL Switch"
		#define MIXER_SET_FEEDBACK_CHANNEL "BT set feedback channel"
		#define MIXER_ENC_FMT_SBC "SBC"
		#define MIXER_ENC_FMT_AAC "AAC"
		#define MIXER_ENC_FMT_APTX "APTX"
		@@ -95,6 +99,18 @@
		#define DEFAULT_SINK_LATENCY_CELT 180
		#define DEFAULT_SINK_LATENCY_LDAC 180

		// Slimbus Tx sample rate for ABR feedback channel
		#define ABR_TX_SAMPLE_RATE "KHZ_8"

		// Purpose ID for Inter Module Communication (IMC) in AFE
		#define IMC_PURPOSE_ID_BT_INFO 0x000132E2

		// Maximum quality levels for ABR
		#define MAX_ABR_QUALITY_LEVELS 5

		// Instance identifier for A2DP
		#define MAX_INSTANCE_ID (UINT32_MAX / 2)

		/*
		* Below enum values are extended from audio_base.h to
		* to keep encoder codec type local to bthost_ipc
		@@ -134,6 +150,42 @@ enum A2DP_STATE {
		A2DP_STATE_DISCONNECTED,
		};

		typedef enum {
		IMC_TRANSMIT,
		IMC_RECEIVE,
		} imc_direction_t;

		typedef enum {
		IMC_DISABLE,
		IMC_ENABLE,
		} imc_status_t;

		/* PCM config for ABR Feedback hostless front end */
		static struct pcm_config pcm_config_abr = {
		.channels = 1,
		.rate = 8000,
		.period_size = 240,
		.period_count = 2,
		.format = PCM_FORMAT_S16_LE,
		.start_threshold = 0,
		.stop_threshold = INT_MAX,
		.avail_min = 0,
		};

		/* Adaptive bitrate config for A2DP codecs */
		struct a2dp_abr_config {
		/* Flag to denote whether Adaptive bitrate is enabled for codec */
		bool is_abr_enabled;
		/* Flag to denote whether front end has been opened for ABR */
		bool abr_started;
		/* ABR Tx path pcm handle */
		struct pcm *abr_tx_handle;
		/* ABR Inter Module Communication (IMC) instance ID */
		uint32_t imc_instance;
		};

		static uint32_t instance_id = MAX_INSTANCE_ID;

		/* structure used to update a2dp state machine
		* to communicate IPC library
		* to store DSP encoder configuration information
		@@ -162,10 +214,76 @@ struct a2dp_data {
		bool is_a2dp_offload_supported;
		bool is_handoff_in_progress;
		bool is_aptx_dual_mono_supported;
		/* Adaptive bitrate config for A2DP codecs */
		struct a2dp_abr_config abr_config;
		};

		struct a2dp_data a2dp;

		/* Adaptive bitrate (ABR) is supported by certain Bluetooth codecs.
		* Structures sent to configure DSP for ABR are defined below.
		* This data helps DSP configure feedback path (BTSoC to LPASS)
		* for link quality levels and mapping quality levels to codec
		* specific bitrate.
		*/

		/* Key value pair for link quality level to bitrate mapping. */
		struct bit_rate_level_map_t {
		uint32_t link_quality_level;
		uint32_t bitrate;
		};

		/* Link quality level to bitrate mapping info sent to DSP. */
		struct quality_level_to_bitrate_info {
		/* Number of quality levels being mapped.
		* This will be equal to the size of mapping table.
		*/
		uint32_t num_levels;
		/* Quality level to bitrate mapping table */
		struct bit_rate_level_map_t bit_rate_level_map[MAX_ABR_QUALITY_LEVELS];
		};

		/* Structure to set up Inter Module Communication (IMC) between
		* AFE Decoder and Encoder.
		*/
		struct imc_dec_enc_info {
		/* Decoder to encoder communication direction.
		* Transmit = 0 / Receive = 1
		*/
		uint32_t direction;
		/* Enable / disable IMC between decoder and encoder */
		uint32_t enable;
		/* Purpose of IMC being set up between decoder and encoder.
		* IMC_PURPOSE_ID_BT_INFO defined for link quality feedback
		* is the default value to be sent as purpose.
		*/
		uint32_t purpose;
		/* Unique communication instance ID.
		* purpose and comm_instance together form the actual key
		* used in IMC registration, which must be the same for
		* encoder and decoder for which IMC is being set up.
		*/
		uint32_t comm_instance;
		};

		/* Structure used for ABR config of AFE encoder and decoder. */
		struct abr_enc_cfg_t {
		/* Link quality level to bitrate mapping info sent to DSP. */
		struct quality_level_to_bitrate_info mapping_info;
		/* Information to set up IMC between decoder and encoder */
		struct imc_dec_enc_info imc_info;
		} __attribute__ ((packed));

		/* Structure to send configuration for decoder introduced
		* on AFE Tx path for ABR link quality feedback to BT encoder.
		*/
		struct abr_dec_cfg_t {
		/* Decoder media format */
		uint32_t dec_format;
		/* Information to set up IMC between decoder and encoder */
		struct imc_dec_enc_info imc_info;
		} __attribute__ ((packed));

		/* START of DSP configurable structures
		* These values should match with DSP interface defintion
		*/
		@@ -265,6 +383,7 @@ struct ldac_enc_cfg_t
		{
		struct custom_enc_cfg_t custom_cfg;
		struct ldac_specific_enc_cfg_t ldac_cfg;
		struct abr_enc_cfg_t abr_cfg;
		} __attribute__ ((packed));

		/* In LE BT source code uses system/audio.h for below
		@@ -348,6 +467,8 @@ typedef struct {
		uint32_t bit_rate; /303000,606000,909000(in bits per second)/
		uint16_t channel_mode; /* 0, 4, 2, 1*/
		uint16_t mtu; /679/
		bool is_abr_enabled;
		struct quality_level_to_bitrate_info level_to_bitrate_map;
		} audio_ldac_encoder_config;

		/********* END of DSP configurable structures ******************/
		@@ -405,6 +526,117 @@ static void update_offload_codec_capabilities()
		ALOGD("%s: codec cap = %s",__func__,value);
		}

		static int stop_abr()
		{
		struct mixer_ctl *ctl_abr_tx_path = NULL;
		struct mixer_ctl *ctl_set_bt_feedback_channel = NULL;

		/* This function can be used if !abr_started for clean up */
		ALOGV("%s: enter", __func__);

		// Close hostless front end
		if (a2dp.abr_config.abr_tx_handle != NULL) {
		pcm_close(a2dp.abr_config.abr_tx_handle);
		a2dp.abr_config.abr_tx_handle = NULL;
		}
		a2dp.abr_config.abr_started = false;
		a2dp.abr_config.imc_instance = 0;

		// Reset BT driver mixer control for ABR usecase
		ctl_set_bt_feedback_channel = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SET_FEEDBACK_CHANNEL);
		if (!ctl_set_bt_feedback_channel) {
		ALOGE("%s: ERROR Set usecase mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_value(ctl_set_bt_feedback_channel, 0, 0) != 0) {
		ALOGE("%s: Failed to set BT usecase", __func__);
		return -ENOSYS;
		}

		// Reset ABR Tx feedback path
		ALOGV("%s: Disable ABR Tx feedback path", __func__);
		ctl_abr_tx_path = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_ABR_TX_FEEDBACK_PATH);
		if (!ctl_abr_tx_path) {
		ALOGE("%s: ERROR ABR Tx feedback path mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_value(ctl_abr_tx_path, 0, 0) != 0) {
		ALOGE("%s: Failed to set ABR Tx feedback path", __func__);
		return -ENOSYS;
		}

		return 0;
		}

		static int start_abr()
		{
		struct mixer_ctl *ctl_abr_tx_path = NULL;
		struct mixer_ctl *ctl_set_bt_feedback_channel = NULL;
		int abr_device_id;
		int ret = 0;

		if (!a2dp.abr_config.is_abr_enabled) {
		ALOGE("%s: Cannot start if ABR is not enabled", __func__);
		return -ENOSYS;
		}

		if (a2dp.abr_config.abr_started) {
		ALOGI("%s: ABR has already started", __func__);
		return ret;
		}

		// Enable Slimbus 7 Tx feedback path
		ALOGV("%s: Enable ABR Tx feedback path", __func__);
		ctl_abr_tx_path = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_ABR_TX_FEEDBACK_PATH);
		if (!ctl_abr_tx_path) {
		ALOGE("%s: ERROR ABR Tx feedback path mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_value(ctl_abr_tx_path, 0, 1) != 0) {
		ALOGE("%s: Failed to set ABR Tx feedback path", __func__);
		return -ENOSYS;
		}

		// Notify ABR usecase information to BT driver to distinguish
		// between SCO and feedback usecase
		ctl_set_bt_feedback_channel = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SET_FEEDBACK_CHANNEL);
		if (!ctl_set_bt_feedback_channel) {
		ALOGE("%s: ERROR Set usecase mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_value(ctl_set_bt_feedback_channel, 0, 1) != 0) {
		ALOGE("%s: Failed to set BT usecase", __func__);
		return -ENOSYS;
		}

		// Open hostless front end and prepare ABR Tx path
		abr_device_id = platform_get_pcm_device_id(USECASE_AUDIO_A2DP_ABR_FEEDBACK,
		PCM_CAPTURE);
		if (!a2dp.abr_config.abr_tx_handle) {
		a2dp.abr_config.abr_tx_handle = pcm_open(a2dp.adev->snd_card,
		abr_device_id, PCM_IN,
		&pcm_config_abr);
		if (a2dp.abr_config.abr_tx_handle == NULL \|\|
		!pcm_is_ready(a2dp.abr_config.abr_tx_handle))
		goto fail;
		}
		ret = pcm_start(a2dp.abr_config.abr_tx_handle);
		if (ret < 0)
		goto fail;
		a2dp.abr_config.abr_started = true;

		return ret;

		fail:
		ALOGE("%s: %s", __func__, pcm_get_error(a2dp.abr_config.abr_tx_handle));
		stop_abr();
		return -ENOSYS;
		}

		/* API to open BT IPC library to start IPC communication */
		static void open_a2dp_output()
		{
		@@ -489,6 +721,12 @@ static int close_a2dp_output()
		a2dp.enc_sampling_rate = 48000;
		a2dp.enc_channels = 2;
		a2dp.bt_state = A2DP_STATE_DISCONNECTED;
		if (a2dp.abr_config.is_abr_enabled && a2dp.abr_config.abr_started)
		stop_abr();
		a2dp.abr_config.is_abr_enabled = false;
		a2dp.abr_config.abr_started = false;
		a2dp.abr_config.imc_instance = 0;
		a2dp.abr_config.abr_tx_handle = NULL;

		return 0;
		}
		@@ -516,48 +754,63 @@ static void a2dp_check_and_set_scrambler()
		}
		}

		static void a2dp_set_backend_cfg()
		static int a2dp_set_backend_cfg()
		{
		char rate_str = NULL, in_channels = NULL;
		uint32_t sampling_rate = a2dp.enc_sampling_rate;
		uint32_t sampling_rate_rx = a2dp.enc_sampling_rate;
		struct mixer_ctl ctl_sample_rate = NULL, ctrl_in_channels = NULL;

		//For LDAC encoder open slimbus port at 96Khz for 48Khz input
		//and 88.2Khz for 44.1Khz input.
		if ((a2dp.bt_encoder_format == ENC_CODEC_TYPE_LDAC) &&
		(sampling_rate == 48000 \|\| sampling_rate == 44100 )) {
		sampling_rate = sampling_rate *2;
		(sampling_rate_rx == 48000 \|\| sampling_rate_rx == 44100 )) {
		sampling_rate_rx *= 2;
		}
		//Configure backend sampling rate
		switch (sampling_rate) {

		// Set Rx backend sample rate
		switch (sampling_rate_rx) {
		case 44100:
		rate_str = "KHZ_44P1";
		break;
		case 48000:
		rate_str = "KHZ_48";
		break;
		case 88200:
		rate_str = "KHZ_88P2";
		break;
		case 96000:
		rate_str = "KHZ_96";
		break;
		case 48000:
		default:
		rate_str = "KHZ_48";
		break;
		}

		ALOGD("%s: set backend sample rate =%s", __func__, rate_str);
		ALOGD("%s: set backend rx sample rate = %s", __func__, rate_str);
		ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SAMPLE_RATE);
		MIXER_SAMPLE_RATE_RX);
		if (!ctl_sample_rate) {
		ALOGE(" ERROR backend sample rate mixer control not identifed");
		return;
		} else {
		ALOGE("%s: ERROR backend sample rate mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctl_sample_rate, rate_str) != 0) {
		ALOGE("%s: Failed to set backend sample rate = %s", __func__, rate_str);
		return;
		return -ENOSYS;
		}

		// Set Tx backend sample rate
		if (a2dp.abr_config.is_abr_enabled)
		rate_str = ABR_TX_SAMPLE_RATE;

		ALOGD("%s: set backend tx sample rate = %s", __func__, rate_str);
		ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SAMPLE_RATE_TX);
		if (!ctl_sample_rate) {
		ALOGE("%s: ERROR backend sample rate mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctl_sample_rate, rate_str) != 0) {
		ALOGE("%s: Failed to set backend sample rate = %s",
		__func__, rate_str);
		return -ENOSYS;
		}

		//Configure AFE input channels
		@@ -571,54 +824,98 @@ static void a2dp_set_backend_cfg()
		break;
		}

		ALOGD("%s: set afe input channels =%d", __func__, a2dp.enc_channels);
		ALOGD("%s: set AFE input channels = %d", __func__, a2dp.enc_channels);
		ctrl_in_channels = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_AFE_IN_CHANNELS);
		if (!ctrl_in_channels) {
		ALOGE(" ERROR AFE input channels mixer control not identifed");
		return;
		} else {
		ALOGE("%s: ERROR AFE input channels mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctrl_in_channels, in_channels) != 0) {
		ALOGE("%s: Failed to set AFE in channels = %d", __func__, a2dp.enc_channels);
		return;
		}
		return -ENOSYS;
		}

		return 0;
		}

		static void a2dp_reset_backend_cfg()
		static int a2dp_reset_backend_cfg()
		{
		char rate_str = "KHZ_8", in_channels = "Zero";
		struct mixer_ctl ctl_sample_rate = NULL, ctrl_in_channels = NULL;
		const char rate_str = "KHZ_8", in_channels = "Zero";
		struct mixer_ctl ctl_sample_rate_rx = NULL, ctl_sample_rate_tx = NULL;
		struct mixer_ctl *ctrl_in_channels = NULL;

		//reset backend sampling rate
		// Reset backend sampling rate
		ALOGD("%s: reset backend sample rate = %s", __func__, rate_str);
		ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SAMPLE_RATE);
		if (!ctl_sample_rate) {
		ALOGE(" ERROR backend sample rate mixer control not identifed");
		return;
		} else {
		if (mixer_ctl_set_enum_by_string(ctl_sample_rate, rate_str) != 0) {
		ALOGE("%s: Failed to reset backend sample rate =%s", __func__, rate_str);
		return;
		ctl_sample_rate_rx = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SAMPLE_RATE_RX);
		if (!ctl_sample_rate_rx) {
		ALOGE("%s: ERROR Rx backend sample rate mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctl_sample_rate_rx, rate_str) != 0) {
		ALOGE("%s: Failed to reset Rx backend sample rate = %s", __func__, rate_str);
		return -ENOSYS;
		}

		ctl_sample_rate_tx = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_SAMPLE_RATE_TX);
		if (!ctl_sample_rate_tx) {
		ALOGE("%s: ERROR Tx backend sample rate mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctl_sample_rate_tx, rate_str) != 0) {
		ALOGE("%s: Failed to reset Tx backend sample rate = %s", __func__, rate_str);
		return -ENOSYS;
		}

		//reset AFE input channels
		ALOGD("%s: reset afe input channels =%s", __func__, in_channels);
		// Reset AFE input channels
		ALOGD("%s: reset AFE input channels = %s", __func__, in_channels);
		ctrl_in_channels = mixer_get_ctl_by_name(a2dp.adev->mixer,
		MIXER_AFE_IN_CHANNELS);
		if (!ctrl_in_channels) {
		ALOGE(" ERROR AFE input channels mixer control not identifed");
		return;
		} else {
		ALOGE("%s: ERROR AFE input channels mixer control not identifed", __func__);
		return -ENOSYS;
		}
		if (mixer_ctl_set_enum_by_string(ctrl_in_channels, in_channels) != 0) {
		ALOGE("%s: Failed to reset AFE in channels = %d", __func__, a2dp.enc_channels);
		return;
		return -ENOSYS;
		}

		return 0;
		}

		/* API to configure AFE decoder in DSP */
		static bool configure_a2dp_decoder_format(int dec_format)
		{
		struct mixer_ctl *ctl_dec_data = NULL;
		struct abr_dec_cfg_t dec_cfg;
		int ret = 0;

		if (a2dp.abr_config.is_abr_enabled) {
		ctl_dec_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_DEC_CONFIG_BLOCK);
		if (!ctl_dec_data) {
		ALOGE("%s: ERROR A2DP codec config data mixer control not identifed", __func__);
		return false;
		}
		memset(&dec_cfg, 0x0, sizeof(dec_cfg));
		dec_cfg.dec_format = dec_format;
		dec_cfg.imc_info.direction = IMC_TRANSMIT;
		dec_cfg.imc_info.enable = IMC_ENABLE;
		dec_cfg.imc_info.purpose = IMC_PURPOSE_ID_BT_INFO;
		dec_cfg.imc_info.comm_instance = a2dp.abr_config.imc_instance;

		ret = mixer_ctl_set_array(ctl_dec_data, &dec_cfg,
		sizeof(dec_cfg));
		if (ret != 0) {
		ALOGE("%s: Failed to set decoder config", __func__);
		return false;
		}
		}

		return true;
		}

		/* API to configure SBC DSP encoder */
		bool configure_sbc_enc_format(audio_sbc_encoder_config *sbc_bt_cfg)
		{
		@@ -973,7 +1270,7 @@ bool configure_aac_enc_format(audio_aac_encoder_config *aac_bt_cfg)
		is_configured = true;
		a2dp.bt_encoder_format = ENC_CODEC_TYPE_AAC;
		a2dp.enc_sampling_rate = aac_bt_cfg->sampling_rate;
		a2dp.enc_channels = aac_bt_cfg->channels;;
		a2dp.enc_channels = aac_bt_cfg->channels;
		ALOGV("Successfully updated AAC enc format with samplingrate: %d channels:%d",
		aac_dsp_cfg.sample_rate, aac_dsp_cfg.channel_cfg);
		fail:
		@@ -1085,6 +1382,14 @@ bool configure_ldac_enc_format(audio_ldac_encoder_config *ldac_bt_cfg)
		ldac_dsp_cfg.custom_cfg.custom_size = sizeof(struct ldac_enc_cfg_t);
		ldac_dsp_cfg.ldac_cfg.mtu = ldac_bt_cfg->mtu;
		ldac_dsp_cfg.ldac_cfg.bit_rate = ldac_bt_cfg->bit_rate;
		if (ldac_bt_cfg->is_abr_enabled) {
		ldac_dsp_cfg.abr_cfg.mapping_info = ldac_bt_cfg->level_to_bitrate_map;
		ldac_dsp_cfg.abr_cfg.imc_info.direction = IMC_RECEIVE;
		ldac_dsp_cfg.abr_cfg.imc_info.enable = IMC_ENABLE;
		ldac_dsp_cfg.abr_cfg.imc_info.purpose = IMC_PURPOSE_ID_BT_INFO;
		ldac_dsp_cfg.abr_cfg.imc_info.comm_instance = a2dp.abr_config.imc_instance;
		}

		ret = mixer_ctl_set_array(ldac_enc_data, (void *)&ldac_dsp_cfg,
		sizeof(struct ldac_enc_cfg_t));
		if (ret != 0) {
		@@ -1108,6 +1413,7 @@ bool configure_ldac_enc_format(audio_ldac_encoder_config *ldac_bt_cfg)
		a2dp.bt_encoder_format = ENC_CODEC_TYPE_LDAC;
		a2dp.enc_sampling_rate = ldac_bt_cfg->sampling_rate;
		a2dp.enc_channels = ldac_dsp_cfg.custom_cfg.num_channels;
		a2dp.abr_config.is_abr_enabled = ldac_bt_cfg->is_abr_enabled;
		ALOGV("Successfully updated LDAC encformat with samplingrate: %d channels:%d",
		ldac_dsp_cfg.custom_cfg.sample_rate, ldac_dsp_cfg.custom_cfg.num_channels);
		fail:
		@@ -1130,6 +1436,9 @@ bool configure_a2dp_encoder_format()
		codec_info = a2dp.audio_get_codec_config(&multi_cast, &num_dev,
		&codec_type);

		// ABR disabled by default for all codecs
		a2dp.abr_config.is_abr_enabled = false;

		switch(codec_type) {
		case ENC_CODEC_TYPE_SBC:
		ALOGD(" Received SBC encoder supported BT device");
		@@ -1176,8 +1485,12 @@ bool configure_a2dp_encoder_format()
		break;
		case ENC_CODEC_TYPE_LDAC:
		ALOGD(" Received LDAC encoder supported BT device");
		if (!instance_id \|\| instance_id > MAX_INSTANCE_ID)
		instance_id = MAX_INSTANCE_ID;
		a2dp.abr_config.imc_instance = instance_id--;
		is_configured =
		configure_ldac_enc_format((audio_ldac_encoder_config *)codec_info);
		(configure_ldac_enc_format((audio_ldac_encoder_config *)codec_info) &&
		configure_a2dp_decoder_format(ENC_CODEC_TYPE_LDAC));
		break;
		default:
		ALOGD(" Received Unsupported encoder formar");
		@@ -1230,6 +1543,8 @@ int audio_extn_a2dp_start_playback()
		a2dp.a2dp_total_active_session_request++;
		a2dp_check_and_set_scrambler();
		a2dp_set_backend_cfg();
		if (a2dp.abr_config.is_abr_enabled)
		start_abr();
		}

		ALOGD("start A2DP playback total active sessions :%d",
		@@ -1288,6 +1603,10 @@ int audio_extn_a2dp_stop_playback()
		ALOGV("stop steam to BT IPC lib successful");
		reset_a2dp_enc_config_params();
		a2dp_reset_backend_cfg();
		if (a2dp.abr_config.is_abr_enabled && a2dp.abr_config.abr_started)
		stop_abr();
		a2dp.abr_config.is_abr_enabled = false;
		a2dp.a2dp_started = false;
		}
		if(!a2dp.a2dp_total_active_session_request)
		a2dp.a2dp_started = false;
		@@ -1446,6 +1765,10 @@ void audio_extn_a2dp_init (void *adev)
		a2dp.is_a2dp_offload_supported = false;
		a2dp.is_handoff_in_progress = false;
		a2dp.is_aptx_dual_mono_supported = false;
		a2dp.abr_config.is_abr_enabled = false;
		a2dp.abr_config.abr_started = false;
		a2dp.abr_config.imc_instance = 0;
		a2dp.abr_config.abr_tx_handle = NULL;
		reset_a2dp_enc_config_params();
		update_offload_codec_capabilities();
		}

hal/audio_hw.c

+3 −1

Original line number	Diff line number	Diff line
		@@ -351,7 +351,9 @@ const char * const use_case_table[AUDIO_USECASE_MAX] = {
		[USECASE_AUDIO_PLAYBACK_INTERACTIVE_STREAM7] = "audio-interactive-stream7",
		[USECASE_AUDIO_PLAYBACK_INTERACTIVE_STREAM8] = "audio-interactive-stream8",

		[USECASE_AUDIO_EC_REF_LOOPBACK] = "ec-ref-audio-capture"
		[USECASE_AUDIO_EC_REF_LOOPBACK] = "ec-ref-audio-capture",

		[USECASE_AUDIO_A2DP_ABR_FEEDBACK] = "a2dp-abr-feedback"
		};

		static const audio_usecase_t offload_usecases[] = {

hal/audio_hw.h

+3 −0

Original line number	Diff line number	Diff line
		@@ -201,6 +201,9 @@ enum {
		USECASE_AUDIO_PLAYBACK_INTERACTIVE_STREAM8,

		USECASE_AUDIO_EC_REF_LOOPBACK,

		USECASE_AUDIO_A2DP_ABR_FEEDBACK,

		AUDIO_USECASE_MAX
		};

hal/msm8916/platform.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -906,6 +906,7 @@ static struct name_to_index usecase_name_index[AUDIO_USECASE_MAX] = {
		{TO_NAME_INDEX(USECASE_AUDIO_PLAYBACK_AFE_PROXY)},
		{TO_NAME_INDEX(USECASE_AUDIO_RECORD_AFE_PROXY)},
		{TO_NAME_INDEX(USECASE_AUDIO_EC_REF_LOOPBACK)},
		{TO_NAME_INDEX(USECASE_AUDIO_A2DP_ABR_FEEDBACK)},
		};

		#define NO_COLS 2

hal/msm8974/platform.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -884,6 +884,7 @@ static struct name_to_index usecase_name_index[AUDIO_USECASE_MAX] = {
		{TO_NAME_INDEX(USECASE_AUDIO_PLAYBACK_AFE_PROXY)},
		{TO_NAME_INDEX(USECASE_AUDIO_RECORD_AFE_PROXY)},
		{TO_NAME_INDEX(USECASE_AUDIO_PLAYBACK_SILENCE)},
		{TO_NAME_INDEX(USECASE_AUDIO_A2DP_ABR_FEEDBACK)},
		};

		#define NO_COLS 2