diff --git a/flash-scripts/linux/fp3_get_oem_unlockcode.sh b/flash-scripts/linux/gs290-flashingUnlock.sh
similarity index 52%
rename from flash-scripts/linux/fp3_get_oem_unlockcode.sh
rename to flash-scripts/linux/gs290-flashingUnlock.sh
index 6fdd59e262ccd7ee86e929ab2ee186383845cbfd..f37b0f61d6a3a6c9cc0c74d89b87e4e13323d9f6 100755
--- a/flash-scripts/linux/fp3_get_oem_unlockcode.sh
+++ b/flash-scripts/linux/gs290-flashingUnlock.sh
@@ -1,6 +1,6 @@
#!/bin/bash
-# Copyright (C) 2020 ECORP SAS - Author: Vincent Bourgmayer
+# Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,40 +16,38 @@
# along with this program. If not, see .
# Parameter
-# $1: The folder where adb runnable is stored
-# $2: serial number of device
+# $1: device id
+# $2: fastboot folder path
# Exit status
-# - 0 : OEM unlocked on device
-# - 10 : Missing ADB folder path
-# - 11 : Missing device ID
-# - 12: can't get IMEI
+# - 0 : bootloader locked
+# - 1 : unknown error
+# - 2 : Flashing unlocked failed
+# - 101 : $DEVICE_ID missing
+# - 102 : $FASTBOOT_FOLDER_PATH is missing
-ADB_FOLDER_PATH=$1
+DEVICE_ID=$1
+FASTBOOT_FOLDER_PATH=$2
-DEVICE_ID=$2
-if [ -z "$ADB_FOLDER_PATH" ]
+# check serial number has been provided
+if [ -z "$DEVICE_ID" ]
then
- exit 10
+ exit 101
fi
-if [ -z "$DEVICE_ID" ]
+# Check fastboot parent folder path has been provided
+if [ -z "$FASTBOOT_FOLDER_PATH" ]
then
- exit 11
+ exit 102
fi
+# Build fastboot path
+FASTBOOT_PATH=${FASTBOOT_FOLDER_PATH}"fastboot"
-ADB_PATH=${ADB_FOLDER_PATH}"adb"
-echo "ADB path: $ADB_PATH"
-
-# get Imei
-DEVICE_IMEI=$($ADB_PATH shell "service call iphonesubinfo 1 | cut -c 52-66 | tr -d '.[:space:]'")
-if [ -z "$DEVICE_IMEI" ]
+# Unlock bootloader
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flashing unlock
then
- exit 12
+ exit 2
fi
-URL="https://factory.fairphone.com/api/unlock-codes/$DEVICE_IMEI/$DEVICE_ID"
-RESULT=$(curl -X POST $URL)
-
-echo "${RESULT:9:8}"
\ No newline at end of file
+sleep 1
diff --git a/flash-scripts/linux/gs290-install-from-bootloader.sh b/flash-scripts/linux/gs290-install-from-bootloader.sh
new file mode 100755
index 0000000000000000000000000000000000000000..a80410cb730dcf90e6d499ef21598aa65afe8cc3
--- /dev/null
+++ b/flash-scripts/linux/gs290-install-from-bootloader.sh
@@ -0,0 +1,133 @@
+#!/bin/bash
+
+# Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# Parameter
+# $1: DEVICE_ID device id
+# $2: ARCHIVE_PATH path to archive
+# $3: fastboot folder path
+# $4: Java folder path
+
+
+# Exit status
+# - 0 : device flashed
+# - 1 : generic error
+# - 10: can't unpack system.img
+# - 11: can't wipe data
+# - 12: can't flash boot
+# - 13: can't flash recovery
+# - 14: can't flash system
+# - 15: can't flash lk
+# - 16: can't flash logo
+# - 101 : DEVICE_ID missing
+# - 102 : ARCHIVE_PATH missing
+# - 103 : fastboot folder path missing
+
+DEVICE_ID=$1
+ARCHIVE_PATH=$2
+FASTBOOT_FOLDER_PATH=$3
+JAVA_FOLDER_PATH=$4
+
+# Check serial number has been provided
+if [ -z "$DEVICE_ID" ]
+then
+ exit 101
+fi
+
+# check path to rom has been provided
+if [ -z "$ARCHIVE_PATH" ]
+then
+ exit 102
+fi
+
+#check path to adb/fasboot has been provided
+if [ -z "$FASTBOOT_FOLDER_PATH" ]
+then
+ exit 103
+fi
+
+# Check java folder has been provided
+if [ -z "$JAVA_FOLDER_PATH" ]
+then
+ exit 104
+fi
+
+
+# Build fastboot path
+FASTBOOT_PATH=${FASTBOOT_FOLDER_PATH}"fastboot"
+
+# Build java jar path
+JAR_PATH=${JAVA_FOLDER_PATH}"/bin/jar"
+
+# Build archive folder path
+ARCHIVE_FOLDER_PATH=$(dirname "$ARCHIVE_PATH")"/"
+
+# unzip for system.img
+cd "$ARCHIVE_FOLDER_PATH" || exit 104
+
+if ! "$JAR_PATH" -x -v -f "$ARCHIVE_PATH" ;
+then
+ exit 10
+fi
+
+echo "unpacked archive"
+
+sleep 1
+
+# Wipe user data
+if ! "$FASTBOOT_PATH" -w ;
+then
+ exit 11
+fi
+
+echo "user data wiped"
+sleep 5
+
+# Flash the device
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flash --disable-verity --disable-verification boot boot.img
+then
+ exit 12
+fi
+sleep 1
+echo "Flashed boot"
+
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flash recovery recovery-e-latest-GS290.img
+then
+ exit 13
+fi
+sleep 1
+echo "Flashed recovery"
+
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flash system system.img
+then
+ exit 14
+fi
+sleep 1
+echo "Flashed system"
+
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flash lk lk.img
+then
+ exit 15
+fi
+sleep 1
+echo "Flashed lk"
+
+if ! "$FASTBOOT_PATH" -s "$DEVICE_ID" flash logo logo.bin
+then
+ exit 16
+fi
+sleep 1
+echo "Flashed logo"
\ No newline at end of file
diff --git a/flash-scripts/linux/gs290-wait-reboot-from-fastboot.sh b/flash-scripts/linux/gs290-wait-reboot-from-fastboot.sh
new file mode 100755
index 0000000000000000000000000000000000000000..17621c173edbf6530eae77715b65bc16ee1ba9ea
--- /dev/null
+++ b/flash-scripts/linux/gs290-wait-reboot-from-fastboot.sh
@@ -0,0 +1,50 @@
+#!/bin/bash
+
+# Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# Parameter
+
+# $1: ADB_FOLDER_PATH: the path where runnable adb is stored
+
+# Exit status
+# - 0 : success
+# - 1 : unknown error
+# - 10 : fastboot reboot command failed
+# - 101 : no device found in fastboot
+
+FASTBOOT_FOLDER_PATH=$1
+FASTBOOT_PATH=${FASTBOOT_FOLDER_PATH}"fastboot"
+
+echo "fastboot path: $FASTBOOT_PATH"
+
+#check that device is in recovery mode
+if ! "$FASTBOOT_PATH" devices 2>&1 | grep "fastboot"
+then
+ echo "Device not detected in fastboot"
+ exit 101
+fi
+
+# Reboot the device
+if ! "$FASTBOOT_PATH" reboot
+then
+ exit 10
+fi
+
+#Then we wait that it left this state
+while [ "$($FASTBOOT_PATH devices | grep -q fastboot; echo $?)" = 0 ]
+do
+ sleep 1s
+done
\ No newline at end of file
diff --git a/flash-scripts/linux/reboot-fastboot.sh b/flash-scripts/linux/reboot-fastboot.sh
new file mode 100755
index 0000000000000000000000000000000000000000..8f11b149bc3ad6a925f2e141c94376ea67f81308
--- /dev/null
+++ b/flash-scripts/linux/reboot-fastboot.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+
+# Copyright (C) 2021 - Author: Vincent Bourgmayer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# TODO: What if 2 devices detected?
+# Parameter
+# $1: serial number of the device
+# $2: The folder where fastboot runnable is stored
+
+# Exit status
+# - 0 : Device in fastboot mode detected
+# - 1 : unknown Error
+# - 10: rebooting in bootloader failed
+# - 101: Device ID not provided
+# - 102: Missing path to adb and fastboot
+
+DEVICE_ID=$1
+ADBFASTBOOT_FOLDER_PATH=$2
+
+# Check DEVICE ID has been provided
+if [ -z "$DEVICE_ID" ]
+then
+ exit 101
+fi
+
+# Check adb and fastboot parent path has been provided
+if [ -z "$ADBFASTBOOT_FOLDER_PATH" ]
+then
+ exit 102
+fi
+
+# Construct path to ADB and FASTBOOT
+FASTBOOT_PATH=${ADBFASTBOOT_FOLDER_PATH}"fastboot"
+ADB_PATH=${ADBFASTBOOT_FOLDER_PATH}"adb"
+
+# reboot device in bootloader mode
+if ! "$ADB_PATH" -s "$DEVICE_ID" reboot bootloader
+then
+ exit 10;
+fi
+
+# Wait device to reboot in fastboot mode
+while [ "$($FASTBOOT_PATH devices | grep -q fastboot; echo $?)" = 1 ]
+do
+ sleep 3s
+done
+#TODO: we should handle the case where this doesn't work
+
+sleep 5s
+echo "fastboot mode detected"
\ No newline at end of file
diff --git a/flash-scripts/windows/COPYING.md b/flash-scripts/windows/COPYING.md
new file mode 100644
index 0000000000000000000000000000000000000000..2fb2e74d8d7fa1c9286b18af0afa5c00402f56e3
--- /dev/null
+++ b/flash-scripts/windows/COPYING.md
@@ -0,0 +1,675 @@
+### GNU GENERAL PUBLIC LICENSE
+
+Version 3, 29 June 2007
+
+Copyright (C) 2007 Free Software Foundation, Inc.
+
+
+Everyone is permitted to copy and distribute verbatim copies of this
+license document, but changing it is not allowed.
+
+### Preamble
+
+The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom
+to share and change all versions of a program--to make sure it remains
+free software for all its users. We, the Free Software Foundation, use
+the GNU General Public License for most of our software; it applies
+also to any other work released this way by its authors. You can apply
+it to your programs, too.
+
+When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you
+have certain responsibilities if you distribute copies of the
+software, or if you modify it: responsibilities to respect the freedom
+of others.
+
+For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the
+manufacturer can do so. This is fundamentally incompatible with the
+aim of protecting users' freedom to change the software. The
+systematic pattern of such abuse occurs in the area of products for
+individuals to use, which is precisely where it is most unacceptable.
+Therefore, we have designed this version of the GPL to prohibit the
+practice for those products. If such problems arise substantially in
+other domains, we stand ready to extend this provision to those
+domains in future versions of the GPL, as needed to protect the
+freedom of users.
+
+Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish
+to avoid the special danger that patents applied to a free program
+could make it effectively proprietary. To prevent this, the GPL
+assures that patents cannot be used to render the program non-free.
+
+The precise terms and conditions for copying, distribution and
+modification follow.
+
+### TERMS AND CONDITIONS
+
+#### 0. Definitions.
+
+"This License" refers to version 3 of the GNU General Public License.
+
+"Copyright" also means copyright-like laws that apply to other kinds
+of works, such as semiconductor masks.
+
+"The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of
+an exact copy. The resulting work is called a "modified version" of
+the earlier work or a work "based on" the earlier work.
+
+A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user
+through a computer network, with no transfer of a copy, is not
+conveying.
+
+An interactive user interface displays "Appropriate Legal Notices" to
+the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+#### 1. Source Code.
+
+The "source code" for a work means the preferred form of the work for
+making modifications to it. "Object code" means any non-source form of
+a work.
+
+A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+The Corresponding Source need not include anything that users can
+regenerate automatically from other parts of the Corresponding Source.
+
+The Corresponding Source for a work in source code form is that same
+work.
+
+#### 2. Basic Permissions.
+
+All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+You may make, run and propagate covered works that you do not convey,
+without conditions so long as your license otherwise remains in force.
+You may convey covered works to others for the sole purpose of having
+them make modifications exclusively for you, or provide you with
+facilities for running those works, provided that you comply with the
+terms of this License in conveying all material for which you do not
+control copyright. Those thus making or running the covered works for
+you must do so exclusively on your behalf, under your direction and
+control, on terms that prohibit them from making any copies of your
+copyrighted material outside their relationship with you.
+
+Conveying under any other circumstances is permitted solely under the
+conditions stated below. Sublicensing is not allowed; section 10 makes
+it unnecessary.
+
+#### 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such
+circumvention is effected by exercising rights under this License with
+respect to the covered work, and you disclaim any intention to limit
+operation or modification of the work as a means of enforcing, against
+the work's users, your or third parties' legal rights to forbid
+circumvention of technological measures.
+
+#### 4. Conveying Verbatim Copies.
+
+You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+#### 5. Conveying Modified Source Versions.
+
+You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these
+conditions:
+
+- a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+- b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under
+ section 7. This requirement modifies the requirement in section 4
+ to "keep intact all notices".
+- c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+- d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your
+ work need not make them do so.
+
+A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+#### 6. Conveying Non-Source Forms.
+
+You may convey a covered work in object code form under the terms of
+sections 4 and 5, provided that you also convey the machine-readable
+Corresponding Source under the terms of this License, in one of these
+ways:
+
+- a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium
+ customarily used for software interchange.
+- b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as
+ long as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the Corresponding
+ Source from a network server at no charge.
+- c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+- d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+- e) Convey the object code using peer-to-peer transmission,
+ provided you inform other peers where the object code and
+ Corresponding Source of the work are being offered to the general
+ public at no charge under subsection 6d.
+
+A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal,
+family, or household purposes, or (2) anything designed or sold for
+incorporation into a dwelling. In determining whether a product is a
+consumer product, doubtful cases shall be resolved in favor of
+coverage. For a particular product received by a particular user,
+"normally used" refers to a typical or common use of that class of
+product, regardless of the status of the particular user or of the way
+in which the particular user actually uses, or expects or is expected
+to use, the product. A product is a consumer product regardless of
+whether the product has substantial commercial, industrial or
+non-consumer uses, unless such uses represent the only significant
+mode of use of the product.
+
+"Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to
+install and execute modified versions of a covered work in that User
+Product from a modified version of its Corresponding Source. The
+information must suffice to ensure that the continued functioning of
+the modified object code is in no case prevented or interfered with
+solely because modification has been made.
+
+If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or
+updates for a work that has been modified or installed by the
+recipient, or for the User Product in which it has been modified or
+installed. Access to a network may be denied when the modification
+itself materially and adversely affects the operation of the network
+or violates the rules and protocols for communication across the
+network.
+
+Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+#### 7. Additional Terms.
+
+"Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders
+of that material) supplement the terms of this License with terms:
+
+- a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+- b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+- c) Prohibiting misrepresentation of the origin of that material,
+ or requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+- d) Limiting the use for publicity purposes of names of licensors
+ or authors of the material; or
+- e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+- f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions
+ of it) with contractual assumptions of liability to the recipient,
+ for any liability that these contractual assumptions directly
+ impose on those licensors and authors.
+
+All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions; the
+above requirements apply either way.
+
+#### 8. Termination.
+
+You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+#### 9. Acceptance Not Required for Having Copies.
+
+You are not required to accept this License in order to receive or run
+a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+#### 10. Automatic Licensing of Downstream Recipients.
+
+Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+#### 11. Patents.
+
+A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+A contributor's "essential patent claims" are all patent claims owned
+or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+A patent license is "discriminatory" if it does not include within the
+scope of its coverage, prohibits the exercise of, or is conditioned on
+the non-exercise of one or more of the rights that are specifically
+granted under this License. You may not convey a covered work if you
+are a party to an arrangement with a third party that is in the
+business of distributing software, under which you make payment to the
+third party based on the extent of your activity of conveying the
+work, and under which the third party grants, to any of the parties
+who would receive the covered work from you, a discriminatory patent
+license (a) in connection with copies of the covered work conveyed by
+you (or copies made from those copies), or (b) primarily for and in
+connection with specific products or compilations that contain the
+covered work, unless you entered into that arrangement, or that patent
+license was granted, prior to 28 March 2007.
+
+Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+#### 12. No Surrender of Others' Freedom.
+
+If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under
+this License and any other pertinent obligations, then as a
+consequence you may not convey it at all. For example, if you agree to
+terms that obligate you to collect a royalty for further conveying
+from those to whom you convey the Program, the only way you could
+satisfy both those terms and this License would be to refrain entirely
+from conveying the Program.
+
+#### 13. Use with the GNU Affero General Public License.
+
+Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+#### 14. Revised Versions of this License.
+
+The Free Software Foundation may publish revised and/or new versions
+of the GNU General Public License from time to time. Such new versions
+will be similar in spirit to the present version, but may differ in
+detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies that a certain numbered version of the GNU General Public
+License "or any later version" applies to it, you have the option of
+following the terms and conditions either of that numbered version or
+of any later version published by the Free Software Foundation. If the
+Program does not specify a version number of the GNU General Public
+License, you may choose any version ever published by the Free
+Software Foundation.
+
+If the Program specifies that a proxy can decide which future versions
+of the GNU General Public License can be used, that proxy's public
+statement of acceptance of a version permanently authorizes you to
+choose that version for the Program.
+
+Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+#### 15. Disclaimer of Warranty.
+
+THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
+WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
+PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
+DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
+CORRECTION.
+
+#### 16. Limitation of Liability.
+
+IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR
+CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
+NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
+LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
+TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
+PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+#### 17. Interpretation of Sections 15 and 16.
+
+If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+END OF TERMS AND CONDITIONS
+
+### How to Apply These Terms to Your New Programs
+
+If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively state
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+
+ Copyright (C)
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see .
+
+Also add information on how to contact you by electronic and paper
+mail.
+
+If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+ Copyright (C)
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands \`show w' and \`show c' should show the
+appropriate parts of the General Public License. Of course, your
+program's commands might be different; for a GUI interface, you would
+use an "about box".
+
+You should also get your employer (if you work as a programmer) or
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. For more information on this, and how to apply and follow
+the GNU GPL, see .
+
+The GNU General Public License does not permit incorporating your
+program into proprietary programs. If your program is a subroutine
+library, you may consider it more useful to permit linking proprietary
+applications with the library. If this is what you want to do, use the
+GNU Lesser General Public License instead of this License. But first,
+please read .
diff --git a/flash-scripts/windows/fp3_install-from-fastboot.bat b/flash-scripts/windows/fp3_install-from-fastboot.bat
old mode 100644
new mode 100755
index b441f049e3daa7def337ddbe54ec8a21d1e4b9c5..9d9c4dc60ba96fba36ca2db610edaee6a9eba6ac
--- a/flash-scripts/windows/fp3_install-from-fastboot.bat
+++ b/flash-scripts/windows/fp3_install-from-fastboot.bat
@@ -129,4 +129,4 @@ echo "flashed vbmeta"
timeout 1 >nul 2>&1
-exit /b 0
+exit /b 0
\ No newline at end of file
diff --git a/flash-scripts/windows/fp3_oem-unlock.bat b/flash-scripts/windows/fp3_oem-unlock.bat
old mode 100644
new mode 100755
diff --git a/flash-scripts/windows/gs290-flashingUnlock.bat b/flash-scripts/windows/gs290-flashingUnlock.bat
new file mode 100755
index 0000000000000000000000000000000000000000..4036966bb0a6e480a0cef50ae411ad92431bec64
--- /dev/null
+++ b/flash-scripts/windows/gs290-flashingUnlock.bat
@@ -0,0 +1,44 @@
+:: Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+::
+:: This program is free software: you can redistribute it and/or modify
+:: it under the terms of the GNU General Public License as published by
+:: the Free Software Foundation, either version 3 of the License, or
+:: (at your option) any later version.
+::
+:: This program is distributed in the hope that it will be useful,
+:: but WITHOUT ANY WARRANTY; without even the implied warranty of
+:: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+:: GNU General Public License for more details.
+::
+:: You should have received a copy of the GNU General Public License
+:: along with this program. If not, see .
+
+:: Parameter
+:: $1: device id
+:: $2: fastboot folder path
+
+:: Exit status
+:: - 0 : bootloader locked
+:: - 1 : unknown error
+:: - 2 : Flashing unlocked failed
+:: - 101 : $DEVICE_ID missing
+:: - 102 : $FASTBOOT_FOLDER_PATH is missing
+
+set DEVICE_ID="%1"
+set FASTBOOT_FOLDER_PATH=%~2
+
+if not defined %DEVICE_ID (
+ exit /b 101
+)
+
+if not defined %FASTBOOT_FOLDER_PATH (
+ exit /b 102
+)
+
+set FASTBOOT_PATH="%FASTBOOT_FOLDER_PATH%fastboot"
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flashing unlock
+if errorlevel 1 ( exit /b 2 )
+
+timeout 1 >nul 2>&1
+exit /b 0
\ No newline at end of file
diff --git a/flash-scripts/windows/gs290-install-from-bootloader.bat b/flash-scripts/windows/gs290-install-from-bootloader.bat
new file mode 100755
index 0000000000000000000000000000000000000000..97f45c82e760969ef4cb7f1eb7b0600b629d4fc5
--- /dev/null
+++ b/flash-scripts/windows/gs290-install-from-bootloader.bat
@@ -0,0 +1,116 @@
+:: Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+::
+:: This program is free software: you can redistribute it and/or modify
+:: it under the terms of the GNU General Public License as published by
+:: the Free Software Foundation, either version 3 of the License, or
+:: (at your option) any later version.
+::
+:: This program is distributed in the hope that it will be useful,
+:: but WITHOUT ANY WARRANTY; without even the implied warranty of
+:: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+:: GNU General Public License for more details.
+::
+:: You should have received a copy of the GNU General Public License
+:: along with this program. If not, see .
+
+:: Parameter
+:: $1: DEVICE_ID device id
+:: $2: ARCHIVE_PATH path to archive
+:: $3: fastboot folder path
+:: $4: Java folder path
+
+
+:: Exit status
+:: - 0 : device flashed
+:: - 1 : generic error
+:: - 10: can't unpack system.img
+:: - 11: can't wipe data
+:: - 12: can't flash boot
+:: - 13: can't flash recovery
+:: - 14: can't flash system
+:: - 15: can't flash lk
+:: - 16: can't flash logo
+:: - 101 : DEVICE_ID missing
+:: - 102 : ARCHIVE_PATH missing
+:: - 103 : fastboot folder path missing
+
+set DEVICE_ID="%1"
+set ARCHIVE_PATH=%~2
+set FASTBOOT_FOLDER_PATH=%~3
+set JAVA_FOLDER_PATH=%~4
+
+if not defined %DEVICE_ID (
+ exit /b 101
+)
+
+if not defined %ARCHIVE_PATH (
+ exit /b 102
+)
+
+if not defined %FASTBOOT_FOLDER_PATH (
+ exit /b 103
+)
+
+:: Check java folder has been provided
+if not defined %JAVA_FOLDER_PATH (
+ exit /b 104
+)
+
+set FASTBOOT_PATH="%FASTBOOT_FOLDER_PATH%fastboot"
+
+
+set JAR_PATH="%JAVA_FOLDER_PATH%/bin/jar"
+
+:: Build archive folder path
+for %%a in ("%ARCHIVE_PATH%") do (
+ set ARCHIVE_FOLDER_PATH=%%~dpa"
+ echo %ARCHIVE_FOLDER_PATH%
+)
+:: unzip for system.img
+cd "%ARCHIVE_FOLDER_PATH%"
+
+%JAR_PATH% -x -v -f "%ARCHIVE_PATH%"
+if errorLevel 1 ( exit /b 10 )
+
+echo "unpacked archive"
+
+timeout 1 >nul 2>&1
+
+%FASTBOOT_PATH% -w
+if errorLevel 1 ( exit /b 11 )
+
+echo "user data wiped"
+
+timeout 5 >nul 2>&1
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flash --disable-verity --disable-verification boot boot.img
+if errorLevel 1 ( exit /b 12 )
+
+timeout 1 >nul 2>&1
+echo "Flashed boot"
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flash recovery recovery-e-latest-GS290.img
+if errorLevel 1 ( exit /b 13 )
+
+timeout 1 >nul 2>&1
+echo "Flashed recovery"
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flash system system.img
+if errorLevel 1 ( exit /b 14 )
+
+timeout 1 >nul 2>&1
+echo "Flashed system"
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flash lk lk.img
+if errorLevel 1 ( exit /b 15 )
+
+timeout 1 >nul 2>&1
+echo "Flashed lk"
+
+%FASTBOOT_PATH% -s %DEVICE_ID% flash logo logo.bin
+if errorLevel 1 ( exit /b 16 )
+
+
+timeout 1 >nul 2>&1
+echo "Flashed logo"
+exit /b 0
\ No newline at end of file
diff --git a/flash-scripts/windows/gs290-wait-reboot-from-fastboot.bat b/flash-scripts/windows/gs290-wait-reboot-from-fastboot.bat
new file mode 100755
index 0000000000000000000000000000000000000000..7e1fe0e7f213d06b195198f8ef10541829c5f7dc
--- /dev/null
+++ b/flash-scripts/windows/gs290-wait-reboot-from-fastboot.bat
@@ -0,0 +1,49 @@
+:: Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+::
+:: This program is free software: you can redistribute it and/or modify
+:: it under the terms of the GNU General Public License as published by
+:: the Free Software Foundation, either version 3 of the License, or
+:: (at your option) any later version.
+::
+:: This program is distributed in the hope that it will be useful,
+:: but WITHOUT ANY WARRANTY; without even the implied warranty of
+:: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+:: GNU General Public License for more details.
+::
+:: You should have received a copy of the GNU General Public License
+:: along with this program. If not, see .
+
+:: Parameter
+:: $1: ADB_FOLDER_PATH: the path where runnable adb is stored
+
+:: Exit status
+:: - 0 : success
+:: - 1 : unknown error
+:: - 10 : fastboot reboot command failed
+:: - 101 : no device found in fastboot
+
+set FASTBOOT_FOLDER_PATH=%~1
+set FASTBOOT_PATH="%FASTBOOT_FOLDER_PATH%fastboot"
+
+echo "fastboot path: %FASTBOOT_FOLDER_PATH%"
+
+
+%FASTBOOT_PATH% devices 2>&1 | findstr fastboot
+if errorLevel 1 (
+ echo "Device not detected in fastboot"
+ exit /b 101
+)
+
+%FASTBOOT_PATH% reboot
+if errorlevel 1 ( exit /b 10 )
+
+:fastboot_detect
+%FASTBOOT_PATH% devices 2>&1 | findstr fastboot
+if errorLevel 0 (
+ timeout 1 >nul 2>&1
+ goto :fastboot_detect
+)
+
+call fastboot_detect
+
+exit /b 0
\ No newline at end of file
diff --git a/flash-scripts/windows/install-from-bootloader-GS290.bat b/flash-scripts/windows/install-from-bootloader-GS290.bat
new file mode 100755
index 0000000000000000000000000000000000000000..452510cc3af85d7028f3b8745e639af66516f02a
--- /dev/null
+++ b/flash-scripts/windows/install-from-bootloader-GS290.bat
@@ -0,0 +1,81 @@
+#!/bin/bash
+
+# Copyright (C) 2020 ECORP SAS - Author: Romain Hunault
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# Parameter
+# $1: DEVICE_ID device id
+# $2: ARCHIVE_PATH path to archive
+# $3: fastboot folder path
+
+# Exit status
+# - 0 : device flashed
+# - 1 : generic error
+# - 101 : DEVICE_ID missing
+# - 102 : ARCHIVE_PATH missing
+# - 103 : fastboot folder path missing
+
+
+set DEVICE_ID="%1"
+set ARCHIVE_PATH=%~2
+set FASTBOOT_FOLDER_PATH=%~3
+set FASTBOOT_PATH="%FASTBOOT_FOLDER_PATH%fastboot"
+
+if not defined %DEVICE_ID (
+ exit /b 101
+)
+
+if not defined %ARCHIVE_PATH (
+ exit /b 102
+)
+
+if not defined %FASTBOOT_FOLDER_PATH (
+ exit /b 103
+)
+
+for %%a in ("%ARCHIVE_PATH%") do (
+ set ARCHIVE_NAME="%%~na"
+)
+
+for %%a in ("%ARCHIVE_PATH%") do (
+ set ARCHIVE_FOLDER_PATH="%%~dpa"
+)
+
+echo "archive path : "%ARCHIVE_PATH%
+echo "archive folder path : "%ARCHIVE_FOLDER_PATH%
+echo "fastboot path : "%FASTBOOT_PATH%
+
+cd "%ARCHIVE_FOLDER_PATH%"
+
+timeout 1 >nul 2>&1
+
+# Should we unzip ?
+
+%FASTBOOT_PATH% -s %DEVICE_ID% erase userdata
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% flash --disable-verity --disable-verification boot boot.img
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% flash recovery recovery-e-latest-GS290.img
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% flash system system.img
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% flash lk lk.img
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% flash logo logo.bin
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% -w
+sleep 1
+%FASTBOOT_PATH% -s %DEVICE_ID% reboot
+sleep 1
diff --git a/flash-scripts/windows/reboot-fastboot.bat b/flash-scripts/windows/reboot-fastboot.bat
new file mode 100755
index 0000000000000000000000000000000000000000..b425fac789796339d3ffda71e1912a9bc73bca7c
--- /dev/null
+++ b/flash-scripts/windows/reboot-fastboot.bat
@@ -0,0 +1,58 @@
+:: Copyright (C) 2021 ECORP SAS - Author: Vincent Bourgmayer
+::
+:: This program is free software: you can redistribute it and/or modify
+:: it under the terms of the GNU General Public License as published by
+:: the Free Software Foundation, either version 3 of the License, or
+:: (at your option) any later version.
+::
+:: This program is distributed in the hope that it will be useful,
+:: but WITHOUT ANY WARRANTY; without even the implied warranty of
+:: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+:: GNU General Public License for more details.
+::
+:: You should have received a copy of the GNU General Public License
+:: along with this program. If not, see .
+
+:: Parameter
+:: $1: serial number of the device
+:: $2: The folder where fastboot runnable is stored
+
+:: Exit status
+:: - 0 : Device in fastboot mode detected
+:: - 1 : unknown Error
+:: - 10: rebooting in bootloader failed
+:: - 101: Device ID not provided
+:: - 102: Missing path to adb and fastboot
+
+set DEVICE_ID="%1"
+set ADBFASTBOOT_FOLDER_PATH=%~2
+
+if not defined %DEVICE_ID (
+ exit /b 101
+)
+
+if not defined %ADBFASTBOOT_FOLDER_PATH (
+ exit /b 102
+)
+
+set FASTBOOT_PATH="%ADBFASTBOOT_FOLDER_PATH%fastboot"
+set ADB_PATH="%ADBFASTBOOT_FOLDER_PATH%adb"
+
+
+%ADB_PATH% -s %DEVICE_ID% reboot bootloader
+if errorlevel 1 ( exit /b 10 )
+
+
+:fastboot_detect
+%FASTBOOT_PATH% devices 2>&1 | findstr fastboot
+if errorLevel 1 (
+ timeout 3 >nul 2>&1
+ goto :fastboot_detect
+)
+
+call fastboot_detect
+
+timeout 5 >nul 2>&1
+echo "fastboot mode detected"
+
+exit /b 0
\ No newline at end of file
diff --git a/flash-scripts/windows/wait-fastboot-unlocked.bat b/flash-scripts/windows/wait-fastboot-unlocked.bat
old mode 100644
new mode 100755
diff --git a/flash-scripts/windows/wait-fastboot.bat b/flash-scripts/windows/wait-fastboot.bat
old mode 100644
new mode 100755
diff --git a/flash-scripts/windows/wait-reboot-from-fastboot.bat b/flash-scripts/windows/wait-reboot-from-fastboot.bat
old mode 100644
new mode 100755
diff --git a/src/main/java/ecorp/easy/installer/controllers/subcontrollers/FlashSceneController.java b/src/main/java/ecorp/easy/installer/controllers/subcontrollers/FlashSceneController.java
index 14db165eca4169037faabeb7e02bdf2f3a77aeb3..b4e28ea5f600d74a4e72dfbfd1018f5fca7e7d23 100644
--- a/src/main/java/ecorp/easy/installer/controllers/subcontrollers/FlashSceneController.java
+++ b/src/main/java/ecorp/easy/installer/controllers/subcontrollers/FlashSceneController.java
@@ -300,8 +300,30 @@ public class FlashSceneController extends AbstractSubSteppedController implement
parentController.setNextButtonVisible((instructionsFlow.getChildren().size() >1));
- // /!\ LINE BELOW IS TEMPORARY
- setNextButtonOnClickListener();
+ parentController.setNextButtonOnClickListener((MouseEvent event)->{
+ final int instructionsCount = instructionsFlow.getChildren().size();
+
+ if ( !db.getBoolean("hasScript")
+ && currentSubStepId == (instructionsCount-1)
+ && !stopped )
+ {
+ synchronized (pauseLock) { pauseLock.notify(); }
+ }else{
+ onNextButtonClicked();
+ }
+ //If there is a script and this instruction before the last one
+ if( db.getBoolean("hasScript")
+ &¤tSubStepId == (instructionsCount-2)
+ && !stopped )
+ {
+ //hide the button to prevent clicking before the end of the full process
+ parentController.setNextButtonVisible(false);
+ }// If there is no script and it's the last instruction: notify flashThread
+
+
+
+ ++currentSubStepId;
+ });
//Hide progress Indicator
UiUtils.hideNode(loadStepProgressIndicator);
@@ -479,8 +501,7 @@ public class FlashSceneController extends AbstractSubSteppedController implement
//get previousLabel
Label nextSubStepLabel = (Label) children.get(currentSubStepId+1);
- //Update the image using instruction key code
-
+ //Update the image using instruction key cod
for(String instruction:instructionsKey){
if(i18n.containsKey(instruction) && i18n.getString(instruction).equals(nextSubStepLabel.getText() ) ){
Image img;
@@ -495,11 +516,7 @@ public class FlashSceneController extends AbstractSubSteppedController implement
break;
}
}
-
- if(currentSubStepId == instructionsNumber-2 && !stopped){
- parentController.setNextButtonVisible(false); //TO prevent clicking before the end of the full process
- }
-
+ //Deemphase previous instruction and emphasize new current one
if(currentSubStepId < instructionsNumber-1){
deemphasizeLabel(currentSubStepLabel);
emphasizeLabel(nextSubStepLabel);
diff --git a/src/main/java/ecorp/easy/installer/helpers/DeviceHelper.java b/src/main/java/ecorp/easy/installer/helpers/DeviceHelper.java
index 5e74e67e943dafd358558510f5a1a07d60edbac8..8471578eb77a93a77917df8e5114c3c08bf65dc3 100644
--- a/src/main/java/ecorp/easy/installer/helpers/DeviceHelper.java
+++ b/src/main/java/ecorp/easy/installer/helpers/DeviceHelper.java
@@ -32,6 +32,7 @@ public class DeviceHelper {
put("dream2lte", "0006");
put("dreamlte", "0007");
put("FP3", "0008");
+ put("GS290", "0009");
}};
diff --git a/src/main/java/ecorp/easy/installer/models/Command.java b/src/main/java/ecorp/easy/installer/models/Command.java
index cce01939d6dd66a72445a94031983353970421b0..5b191d387465d3abda12673079167801f9985949 100644
--- a/src/main/java/ecorp/easy/installer/models/Command.java
+++ b/src/main/java/ecorp/easy/installer/models/Command.java
@@ -138,28 +138,33 @@ public class Command {
ProcessBuilder pb;
if(AppConstants.isWindowsOs())
{
- //pb = new ProcessBuilder();
- String[] commandArray= new String[parameters.size()+3];
- commandArray[0] = "cmd.exe";
- commandArray[1] = "/c";
- commandArray[2] = "\"\""+command+"\"";
+ //@TODO REWRITE THIS PART AND MOVE IT TO getFinalCmd()
+ final int cmdArraySize = parameters.size()+3;
+ String[] commandArray= new String[cmdArraySize];
+
+ int cmdArrayIndex = 0;
+ commandArray[cmdArrayIndex++] = "cmd.exe";
+ commandArray[cmdArrayIndex++] = "/c";
+
+ commandArray[cmdArrayIndex++] = "\"\""+command+(parameters.isEmpty() ? "\"\"":"\"");
+ //if empty param: commandArray[2] = ""scriptFolder/scriptname.bat""
+ //else : commandArray[2] = ""scriptFolder/scriptname.bat"
- int i = 2;
for(String param : parameters.values()){
String quotedParam = "\""+param+"\"";
- if(i+1 == parameters.size()-1){
- quotedParam += "\"";
+ //If this is the last parameter in the list
+ if(cmdArrayIndex == cmdArraySize-1){
+ quotedParam += "\""; //add a closing <<">>
}
- commandArray[++i] = quotedParam;
+ //add the quoted param in the cmdArray
+ commandArray[cmdArrayIndex++] = quotedParam;
}
pb = new ProcessBuilder(commandArray);
logger.debug("command: {}", pb.command());
- //pb.directory(new File(AppConstants.getRootPath().substring(0, AppConstants.getRootPath().length()-2)));
- //logger.debug("Pb dir: {}", pb.directory());
- //pb.command(commandArray);
}else{
- pb = new ProcessBuilder(getFinalCmd());
+ pb = new ProcessBuilder(getFinalCmd());
}
+
pb.redirectErrorStream(true);
pc= pb.start();
logger.info("Command's Process started");
@@ -261,4 +266,12 @@ public class Command {
}
return step.getAfterFail();
}
+
+ /**
+ * tell if the command has a script registered
+ * @return false if step's script is null else return true
+ */
+ public boolean hasScript(){
+ return (step.getScript() != null);
+ }
}
diff --git a/src/main/java/ecorp/easy/installer/threads/FlashThread.java b/src/main/java/ecorp/easy/installer/threads/FlashThread.java
index e6677dbc224e4862a3370f4416673b175fa46c3f..f38eb4c76173f7485930a26d68c3b52abc16be17 100644
--- a/src/main/java/ecorp/easy/installer/threads/FlashThread.java
+++ b/src/main/java/ecorp/easy/installer/threads/FlashThread.java
@@ -217,24 +217,14 @@ public class FlashThread extends Thread {
}
bundle.putString("stepTitle", newUIValues.getTitle());
bundle.putList("stepInstructions", String.class.getSimpleName(), newUIValues.getInstructions());
-
+ bundle.putBoolean("hasScript", cmd.hasScript());
}
}
//Update UI
Platform.runLater(()->{
- logger.debug("runLater-> Update UI for"+cmd.getCommand());
application.onStepStart(bundle);
});
-
- if(stepType.equals(AppConstants.ASK_ACCOUNT_KEY) || stepType.equals(AppConstants.UNLOCK_OEM_KEY))
- {
- try{
- synchronized(pauseLock){ pauseLock.wait(); }
- }catch (InterruptedException e) {
- logger.error("error = "+e.toString());
- }
- }
}
/**
@@ -290,23 +280,28 @@ public class FlashThread extends Thread {
while(nextCommandKey != null ){
currentStepCode = nextCommandKey;
final Command cmd = commands.get(nextCommandKey);
+ final String stepType = cmd.getNewUIValues().getType();
- updateParameters();
//UpdateUI
doBeforeToRunCommand();
- final String stepType = cmd.getNewUIValues().getType();
- if( stepType.equals(AppConstants.USER_ACTION_KEY)
- || stepType.equals(AppConstants.LOAD_KEY) )
+
+ if( cmd.hasScript() &&
+ ( stepType.equals(AppConstants.USER_ACTION_KEY) ||
+ stepType.equals(AppConstants.LOAD_KEY) ) )
{
+
+ updateParameters();
+
logger.debug("Run(), Command = "+cmd.getCommand());
cmd.execAndReadOutput();
success = handleResult(cmd);
+
+ doAfterToRunCommand();
}else{
+ logger.debug("run a no script step. Waiting for user's validation");
+ synchronized(pauseLock){ pauseLock.wait(); }
success = true;
}
-
- doAfterToRunCommand();
-
nextCommandKey = cmd.getNextCommandKey();
}
diff --git a/src/main/java/ecorp/easy/installer/threads/ThreadFactory.java b/src/main/java/ecorp/easy/installer/threads/ThreadFactory.java
index 771e68e7f9ed20da31347369364b278624b1c5a8..5cf6c5d742dfdfb6c50f53aca92164b21f961bc2 100644
--- a/src/main/java/ecorp/easy/installer/threads/ThreadFactory.java
+++ b/src/main/java/ecorp/easy/installer/threads/ThreadFactory.java
@@ -83,30 +83,34 @@ public class ThreadFactory {
//load config file
InputStream is = getClass().getResourceAsStream(yamlFolderPath+modelName+".yml");
- Map yamLContent= (Map)yaml.load(is);
-
- if(yamLContent == null) throw new NullPointerException("flash content load from yaml is empty");
- flashMould = new ProcessMould(modelName);
-
- loadFlashProcess((Map) yamLContent.get("flash"));
+ Map yamlContent= (Map)yaml.load(is);
is.close();
+ if(yamlContent == null || yamlContent.isEmpty() ) {
+ logger.error("Parsed step list from yaml file is empty or null");
+ return false;
+ }
+
+ flashMould = new ProcessMould(modelName);
+ loadFlashProcess((Map) yamlContent.get("flash"));
- //Load config file specific to Flash station
+ //Load config file specific to user interface
//DO NOT USE classLoader() to load resource!
is = getClass().getResourceAsStream(yamlFolderPath+modelName+"_fs.yml");
- yamLContent= (Map)yaml.load(is);
- if(yamLContent == null) throw new NullPointerException("extra content load from yaml is empty");
-
- loadFlashExtra((Map) yamLContent.get("flash"));
-
- loadSourcesToDownload((Map) yamLContent.get("sources"));
-
+ //@TODO @REFACTOR USE ANOTHER VARIABLE!
+ yamlContent= (Map)yaml.load(is);
is.close();
- }catch(IOException | NullPointerException e){
+ if(yamlContent == null || yamlContent.isEmpty()) {
+ logger.error("Parsed extra datas (UI, sources) from yaml file are empty or null");
+ return false;
+ }
+
+ loadFlashExtra((Map) yamlContent.get("flash"));
+ loadSourcesToDownload((Map) yamlContent.get("sources"));
+
+ }catch(IOException e){
logger.error("modelName = {}, error= {}", modelName, e.toString());
-
return false;
}
return true;
@@ -118,44 +122,50 @@ public class ThreadFactory {
*/
protected void loadFlashProcess( Map steps){
logger.info("loadFlashProcess( ... ) ");
- if(steps == null || steps.isEmpty()){
- throw new InvalidParameterException("Flash steps loaded from YAML are invalid");
- }
Set keys = steps.keySet();
-
- String scriptExtension = AppConstants.OsName.toLowerCase().contains("windows") ? ".bat" : ".sh";
+
for(String key: keys){
logger.debug("Key = "+key);
- Map stepData = (Map) steps.get(key);
- Step step = new Step();
+ Map stepData = (Map) steps.get(key); //Content load from YAML file
+ Step step = new Step(); //Object to build
- step.setScript((String) stepData.get("script")+scriptExtension);
-
- Map codes = (Map) stepData.get("codes");
- if(codes != null){
- step.setOkCode ( (Map) codes.get("ok") );
- step.setKoCode ( (Map) codes.get("ko") );
+ //1. Does the step contain a script ?
+ if(stepData.get("script") != null){
+ step.setScript(stepData.get("script")+( AppConstants.isWindowsOs() ? ".bat" : ".sh" ) );
+
+ //Fill the result codes fields
+ Map codes = (Map) stepData.get("codes");
+ if(codes != null){
+ step.setOkCode ( (Map) codes.get("ok") );
+ step.setKoCode ( (Map) codes.get("ko") );
+ }
+
+ //Fill the parameters field
+ step.setParameters ((LinkedHashMap) stepData.get("parameters") );
+
+ //Fill the output to read - this is the name of a variable
+ //to create and store in CommonParams for use in another step
+ step.setOutput ((String) stepData.get("output") );
+ }else{ //This is for step without script to run
+ step.setScript(null);
}
- step.setParameters ((LinkedHashMap) stepData.get("parameters") );
-
- step.setOutput ((String) stepData.get("output") );
+ //Fill the step's key of the next step in case of success or failure
step.setAfterSuccess ((String) stepData.get("succeed") );
step.setAfterFail ((String) stepData.get("failed") );
- this.flashMould.addStep(key, step);
+
+ //Integrate the step in the process
+ flashMould.addStep(key, step);
}
}
/**
- * Load extra element for Flash process (it contains mainly UI's element)
+ * Load extra element for Flash process (sources to dl and UI definition)
* @TODO: make entries's key a final static to be store only at one place
* @param steps Map Loaded from YAML
*/
protected void loadFlashExtra( Map steps){
logger.info("loadFlashExtra(...)");
- if(steps == null || steps.isEmpty()){
- throw new InvalidParameterException("Flash steps's extra loaded from YAML are invalid");
- }
for(String key : (Set) steps.keySet() ){
Map subObj = (Map) steps.get(key);
diff --git a/src/main/resources/images/gs290_allowOEMUnlocking.png b/src/main/resources/images/gs290_allowOEMUnlocking.png
new file mode 100644
index 0000000000000000000000000000000000000000..04079705b390056e9b0161bbe27f0e58342cfaac
Binary files /dev/null and b/src/main/resources/images/gs290_allowOEMUnlocking.png differ
diff --git a/src/main/resources/images/gs290_enableOEMUnlocking.png b/src/main/resources/images/gs290_enableOEMUnlocking.png
new file mode 100644
index 0000000000000000000000000000000000000000..3e3a219e66058a30a549211f7bfb9894038b222d
Binary files /dev/null and b/src/main/resources/images/gs290_enableOEMUnlocking.png differ
diff --git a/src/main/resources/images/gs290_pressVolUp.png b/src/main/resources/images/gs290_pressVolUp.png
new file mode 100644
index 0000000000000000000000000000000000000000..89f2e04c56e1e0af9ffec6f5de9b20580f420996
Binary files /dev/null and b/src/main/resources/images/gs290_pressVolUp.png differ
diff --git a/src/main/resources/images/gs290_searchOEM.png b/src/main/resources/images/gs290_searchOEM.png
new file mode 100644
index 0000000000000000000000000000000000000000..0df5b59b6784b6955c782870ad4acd038a73b2f2
Binary files /dev/null and b/src/main/resources/images/gs290_searchOEM.png differ
diff --git a/src/main/resources/images/gs290_settings.png b/src/main/resources/images/gs290_settings.png
new file mode 100644
index 0000000000000000000000000000000000000000..95fcdae40c155623ca2da10b6f244c181c99c103
Binary files /dev/null and b/src/main/resources/images/gs290_settings.png differ
diff --git a/src/main/resources/images/gs290_settingsSystem.png b/src/main/resources/images/gs290_settingsSystem.png
new file mode 100644
index 0000000000000000000000000000000000000000..17d580f9317ceaa5886c78b6a782eb2a8cd90bd1
Binary files /dev/null and b/src/main/resources/images/gs290_settingsSystem.png differ
diff --git a/src/main/resources/images/gs290_settingsSystemUpdate.png b/src/main/resources/images/gs290_settingsSystemUpdate.png
new file mode 100644
index 0000000000000000000000000000000000000000..b2e5315f150279f18cba075871faee68a47f0e30
Binary files /dev/null and b/src/main/resources/images/gs290_settingsSystemUpdate.png differ
diff --git a/src/main/resources/images/gs290_systemUpdate.png b/src/main/resources/images/gs290_systemUpdate.png
new file mode 100644
index 0000000000000000000000000000000000000000..320241d1b9c25ce9f756858a6369538563722509
Binary files /dev/null and b/src/main/resources/images/gs290_systemUpdate.png differ
diff --git a/src/main/resources/instructions/imageName_en_EN_0009.properties b/src/main/resources/instructions/imageName_en_EN_0009.properties
new file mode 100644
index 0000000000000000000000000000000000000000..848dd47db0a6b6be155cbd1924f3c8c6e92ecce7
--- /dev/null
+++ b/src/main/resources/instructions/imageName_en_EN_0009.properties
@@ -0,0 +1,23 @@
+# Copyright 2019-2020 - ECORP SAS
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+install_instr_openSettings=gs290_settings.png
+install_instr_searchOEM=gs290_searchOEM.png
+install_instr_enableOEMUnlocking=gs290_enableOEMUnlocking.png
+install_instr_acceptOEMUnlockWarning=gs290_allowOEMUnlocking.png
+install_instr_pressVolUpToAcceptOEMUnlocking=gs290_pressVolUp.png
+install_instr_GS290_accessSystemSettings=gs290_settingsSystem.png
+install_instr_GS290_accessSystemUpdate=gs290_settingsSystemUpdate.png
+install_instr_update_stockrom=gs290_systemUpdate.png
\ No newline at end of file
diff --git a/src/main/resources/lang/translation.properties b/src/main/resources/lang/translation.properties
index 505d05c74ecdbdc334ffdbc4e8ffa801fe47483c..302b78118f7aae77466eceaa0dad2bd0f246fe1b 100644
--- a/src/main/resources/lang/translation.properties
+++ b/src/main/resources/lang/translation.properties
@@ -158,6 +158,19 @@ install_instr_startDl_pressPowerBixbyVolDown= Keep pressing simultaneously "Powe
install_instr_startRec_pressPowerBixbyVolUp= Keep pressing simultaneously "Power" & "Bixby" & "Volume Up" until 'teamwin' screen appears
install_instr_leaveDl_pressPowerBixbyVolDown= Keep pressing simultaneously "Power" & "Bixby" & "Volume Down" until device turns off
install_instr_update_stockrom= Update your device to the latest version
+install_instr_connectTowifi= Connect your device to Wi-fi
+install_instr_GS290_accessSystemSettings = Open Settings and go to "System"
+install_instr_GS290_accessSystemUpdate = Open "System update"
+install_instr_continueIfDeviceUpToDate = Once your device is up-to-date, you can click on continue. Note that you must have the latest Android 10 version installed.
+install_instr_searchOEM = Tap on the search icon. Type "OEM" to search "OEM unlocking" option
+install_instr_enableOEMUnlocking = Enable "OEM unlocking"
+install_instr_acceptOEMUnlockWarning = Accept the warning message by taping on "enable"
+install_instr_onceDoneThenContinue = Once OEM unlocking is enabled, you can click on continue
+install_instr_waitInstallStartAuto = Please wait, installation will start automatically
+install_instr_onceDeviceRebootThenContinue = Your device will reboot automatically. Once it's done, you can click on continue
+install_instr_rebootingOnBootloader=Your device will reboot automatically on bootloader mode
+install_instr_pressVolUpToAcceptOEMUnlocking = Press "Volume up" to accept OEM unlocking
+install_instr_unlockingOem= Easy-installer is unlocking OEM
script_error_waitDownload_1 = Can't detect device in "Download mode"
script_error_waitFastboot_1 = Can't detect device in "fastboot mode"
script_error_oemUnlock_10 = Can't allow custom OS installation on your device
@@ -178,6 +191,9 @@ script_error_installFromFastboot_102 = Could not unpack /e/ install archive
script_error_waitReboot_10 = No device's serial number provided
script_error_waitReboot_101 = Can't run instruction on the device
script_error_waitRebootFromFastboot_101 = Can't run instruction on the device
+script_error_serialNumber_missing=No device's serial number provided
+script_error_fastboot_path_missing= No fastboot tool path provided
+script_error_fastboot_flashingUnlock_failed=Could not unlock flashing
script_error_unknown= The installation encounter an error
java_error_unknow= The installation encounter an internal error
flash_process_cancelled=The installation process has been cancelled
@@ -249,4 +265,9 @@ stepTitle_formatDataTurnOff = Format data and turn off
stepTitle_restartRecovery = Restart in Recovery mode
stepTitle_installOS = /e/ Installation
stepTitle_resizeDataPartition = Resize Data partition
-stepTitle_StartInFastbootFP3 = Start device in Fastboot mode
\ No newline at end of file
+stepTitle_StartInFastbootFP3 = Start device in Fastboot mode
+stepTitle_checkDeviceUptodate= Check device is up-to-date
+stepTitle_enableOemUnlock= Enable OEM unlocking
+stepTitle_beforeInstallation= Before installation
+stepTitle_rebootDevice= Reboot device
+stepTitle_rebootBootloader = "Rebooting in bootloader mode"
\ No newline at end of file
diff --git a/src/main/resources/yaml/GS290.yml b/src/main/resources/yaml/GS290.yml
new file mode 100644
index 0000000000000000000000000000000000000000..9817806aa1bfd7f35840d2c58dd9d0a290ef6469
--- /dev/null
+++ b/src/main/resources/yaml/GS290.yml
@@ -0,0 +1,110 @@
+## Copyright 2019-2020 - ECORP SAS
+
+## This program is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program. If not, see .
+## Author: Vincent Bourgmayer
+---
+name: GS290
+flash:
+ f1:
+ script: ~
+ parameters: ~
+ codes: ~
+ output: ~
+ succeed: f2
+ failed: ~
+ f2:
+ script: ~
+ parameters: ~
+ codes: ~
+ output: ~
+ succeed: f3
+ failed: ~
+ f3:
+ script: reboot-fastboot
+ parameters:
+ device_id: ${DEVICE_ID}
+ fastboot_folder_path: ${ADB_FOLDER_PATH}
+ codes:
+ ok:
+ 0: ~
+ ko:
+ 1: script_error_unknown
+ 10: script_error_cantRebootBootloader
+ 101: script_error_deviceID_missing
+ 102: script_error_fastbootPath_missing
+ output: ~
+ succeed: f4
+ failed: ~
+ f4:
+ script: gs290-flashingUnlock
+ parameters:
+ device_id: ${DEVICE_ID}
+ fastboot_folder_path: ${ADB_FOLDER_PATH}
+ codes:
+ ok:
+ 0: ~
+ ko:
+ 1: script_error_unknown
+ 2: script_error_flashingUnlockFailed
+ 101: script_error_deviceID_missing
+ 102: script_error_fastbootPath_missing
+ output: ~
+ succeed: f5
+ failed: ~
+ f5:
+ script: gs290-install-from-bootloader
+ parameters:
+ device_id: ${DEVICE_ID}
+ archive_path: ${ARCHIVE_PATH}
+ fastboot_folder_path: ${ADB_FOLDER_PATH}
+ java_folder_path: ${JAVA_FOLDER_PATH}
+ codes:
+ ok:
+ 0: ~
+ ko:
+ 1: script_error_unknown
+ 10: script_error_cantUnpackSources
+ 11: script_error_cantWipeData
+ 12: script_error_cantFlashBoot
+ 13: script_error_cantFlashRecovery
+ 14: script_error_cantFlashsystem
+ 15: script_error_cantFlashLk
+ 16: script_error_cantFlashLogo
+ 101: script_error_deviceID_missing
+ 102: script_error_installFromFastboot_102
+ 103: script_error_fastbootPath_missing
+ output: ~
+ succeed: f6
+ failed: ~
+ f6:
+ script: askAccount
+ parameters: ~
+ codes: ~
+ output: ~
+ succeed: f7
+ failed: ~
+ f7:
+ script: gs290-wait-reboot-from-fastboot
+ parameters:
+ fastboot_folder_path: ${ADB_FOLDER_PATH}
+ codes:
+ ok:
+ 0: ~
+ ko:
+ 1: script_error_unknown
+ 10: script_error_cantrebootFromFasboot
+ 101: script_error_noDeviceFoundInFastboot
+ output: ~
+ succeed: ~
+ failed: ~
\ No newline at end of file
diff --git a/src/main/resources/yaml/GS290_fs.yml b/src/main/resources/yaml/GS290_fs.yml
new file mode 100644
index 0000000000000000000000000000000000000000..c0e2c7f976888279b2f72adcbd3082d6aef85919
--- /dev/null
+++ b/src/main/resources/yaml/GS290_fs.yml
@@ -0,0 +1,94 @@
+## Copyright 2019-2020 - ECORP SAS
+
+## This program is free software: you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation, either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program. If not, see .
+## Author: Vincent Bourgmayer
+---
+sources:
+ rom:
+ url: https://images.ecloud.global/stable/GS290/IMG-e-latest-GS290.zip
+ filePath: IMG-e-latest-GS290.zip
+ boot.img:
+ url: https://images.ecloud.global/stable/GS290/boot.img
+ filePath: boot.img
+ lk.img:
+ url: https://images.ecloud.global/stable/GS290/lk.img
+ filePath: lk.img
+ logo.bin:
+ url: https://images.ecloud.global/stable/GS290/logo.bin
+ filePath: logo.bin
+ recovery:
+ url: https://images.ecloud.global/stable/GS290/recovery-e-latest-GS290.img
+ filePath: recovery-e-latest-GS290.img
+flash:
+ f1:
+ ui:
+ type: action
+ title: stepTitle_checkDeviceUptodate
+ instruction:
+ - install_instr_connectTowifi
+ - install_instr_GS290_accessSystemSettings
+ - install_instr_GS290_accessSystemUpdate
+ - install_instr_update_stockrom
+ - install_instr_continueIfDeviceUpToDate
+ stepNumber: 1/6
+ titleIcon: icon-download.png
+ f2:
+ ui:
+ type: action
+ title: stepTitle_enableOemUnlock
+ instruction:
+ - install_instr_openSettings
+ - install_instr_searchOEM
+ - install_instr_enableOEMUnlocking
+ - install_instr_acceptOEMUnlockWarning
+ - install_instr_onceDoneThenContinue
+ stepNumber: 2/6
+ titleIcon: icon-download.png
+ f3:
+ ui:
+ type: load
+ title: stepTitle_rebootBootloader
+ instruction:
+ - install_instr_rebootingOnBootloader
+ stepNumber: 3/6
+ averageTime: 12
+ f4:
+ ui:
+ type: action
+ title: stepTitle_oemUnlock
+ instruction:
+ - install_instr_pressVolUpToAcceptOEMUnlocking
+ - install_instr_unlockingOem
+ - install_instr_waitInstallStartAuto
+ stepNumber: 4/6
+ titleIcon: icon-download.png
+ f5:
+ ui:
+ type: load
+ title: stepTitle_installOS
+ instruction:
+ - install_instr_eosInstall
+ stepNumber: 5/6
+ averageTime: 200
+ f6:
+ ui:
+ type: askAccount
+ f7:
+ ui:
+ type: action
+ title: stepTitle_rebootDevice
+ instruction:
+ - install_instr_onceDeviceRebootThenContinue
+ stepNumber: 6/6
+ titleIcon: icon-download.png