Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d0438bd6 authored by Antoine Tenart's avatar Antoine Tenart Committed by David S. Miller
Browse files

phy: add the mvebu cp110 comphy driver 



On the CP110 unit, which can be found on various Marvell platforms such
as the 7k and 8k (currently), a comphy (common PHYs) hardware block can
be found. This block provides a number of PHYs which can be used in
various modes by other controllers (network, SATA ...). These common
PHYs must be configured for the controllers using them to work correctly
either at boot time, or when the system runs to switch the mode used.
This patch adds a driver for this comphy hardware block, providing
callbacks for the its PHYs so that consumers can configure the modes
used.

As of this commit, two modes are supported by the comphy driver: sgmii
and 10gkr.

Signed-off-by: default avatarAntoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5c23f2dc

drivers/phy/marvell/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -21,6 +21,17 @@ config PHY_BERLIN_USB 
	help

	  Enable this to support the USB PHY on Marvell Berlin SoCs.



config PHY_MVEBU_CP110_COMPHY

	tristate "Marvell CP110 comphy driver"

	depends on ARCH_MVEBU || COMPILE_TEST

	depends on OF

	select GENERIC_PHY

	help

	  This driver allows to control the comphy, an hardware block providing

	  shared serdes PHYs on Marvell Armada 7k/8k (in the CP110). Its serdes

	  lanes can be used by various controllers (Ethernet, sata, usb,

	  PCIe...).



config PHY_MVEBU_SATA

	def_bool y

	depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD

drivers/phy/marvell/Makefile

+1 −0
Original line number Diff line number Diff line 
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o

obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o

obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o

obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY)	+= phy-mvebu-cp110-comphy.o

obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o

obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o

obj-$(CONFIG_PHY_PXA_28NM_USB2)		+= phy-pxa-28nm-usb2.o

drivers/phy/marvell/phy-mvebu-cp110-comphy.c

0 → 100644
+644 −0

File added.

Preview size limit exceeded, changes collapsed.