Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b3749b42 authored by Shankar Ravi's avatar Shankar Ravi
Browse files

ARM: dts: msm: Add nodes for eeprom, actuator in triple cam for sdmmagpie 



1.Add nodes for eeprom and actuator to support multicam
usecases as we cannot reuse the existing nodes.

2.Wide and tele use the same eeprom, so correct the eeprom
configuration.

Signed-off-by: default avatarShankar Ravi <rshankar@codeaurora.org>
Change-Id: I42e88ef491f11a91445f90af522f5098d06021ac
parent f81cd669

arch/arm64/boot/dts/qcom/sdmmagpie-camera-sensor-idp.dtsi

+65 −16
Original line number Diff line number Diff line
@@ -67,6 +67,19 @@ 
		rgltr-load-current = <100000>;

	};



	actuator_triple_tele: qcom,actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8009_s2>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2900000>;

		rgltr-max-voltage = <2900000>;

		rgltr-load-current = <100000>;

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;
@@ -183,33 +196,69 @@ 
		reg = <0x3>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l4>;

		cam_vana-supply = <&pm8009_l5>;

		cam_vdig-supply = <&pm8009_l1>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&pm8009_s2>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1200000 0 2900000>;

		rgltr-max-voltage = <1800000 2800000 1200000 0 2900000>;

		rgltr-min-voltage = <1800000 2800000 1100000 0 2900000>;

		rgltr-max-voltage = <1800000 2800000 1100000 0 2900000>;

		rgltr-load-current = <0 80000 105000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 14 0>,

			<&pm8009_gpios 2 0>;

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&pm8009_gpios 1 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_triple_uw: qcom,eeprom@4 {

		cell-index = <4>;

		reg = <0x4>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1050000 0>;

		rgltr-max-voltage = <1800000 2800000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 15 0>,

			<&pm8009_gpios 4 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;
@@ -438,7 +487,7 @@ 
		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear_aux>;

		eeprom-src = <&eeprom_triple_rear_aux>;

		actuator-src = <&actuator_rear>;

		actuator-src = <&actuator_triple_tele>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l4>;
@@ -479,10 +528,10 @@ 
		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		cam_vio-supply = <&pm8009_l7>;

		eeprom-src = <&eeprom_front>;

		eeprom-src = <&eeprom_triple_uw>;

		led-flash-src = <&led_flash_rear_aux>;

		actuator-src = <&actuator_rear_aux>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vana-supply = <&pm8009_l6>;

		cam_vdig-supply = <&pm8009_l2>;

		cam_clk-supply = <&titan_top_gdsc>;