Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6d1f178f authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge 4.14.257 into android-4.14-stable



Changes in 4.14.257
	USB: serial: option: add Telit LE910S1 0x9200 composition
	USB: serial: option: add Fibocom FM101-GL variants
	usb: hub: Fix usb enumeration issue due to address0 race
	usb: hub: Fix locking issues with address0_mutex
	binder: fix test regression due to sender_euid change
	ALSA: ctxfi: Fix out-of-range access
	media: cec: copy sequence field for the reply
	HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
	staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
	fuse: fix page stealing
	xen: don't continue xenstore initialization in case of errors
	xen: detect uninitialized xenbus in xenbus_init
	tracing: Fix pid filtering when triggers are attached
	netfilter: ipvs: Fix reuse connection if RS weight is 0
	ARM: dts: BCM5301X: Fix I2C controller interrupt
	ARM: dts: BCM5301X: Add interrupt properties to GPIO node
	ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
	net: ieee802154: handle iftypes as u32
	NFSv42: Don't fail clone() unless the OP_CLONE operation failed
	ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
	scsi: mpt3sas: Fix kernel panic during drive powercycle test
	drm/vc4: fix error code in vc4_create_object()
	ipv6: fix typos in __ip6_finish_output()
	net/smc: Ensure the active closing peer first closes clcsock
	PM: hibernate: use correct mode for swsusp_close()
	tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
	MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
	net/smc: Don't call clcsock shutdown twice when smc shutdown
	vhost/vsock: fix incorrect used length reported to the guest
	tracing: Check pid filtering when creating events
	s390/mm: validate VMA in PGSTE manipulation functions
	PCI: aardvark: Fix I/O space page leak
	PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
	PCI: aardvark: Wait for endpoint to be ready before training link
	PCI: aardvark: Train link immediately after enabling training
	PCI: aardvark: Improve link training
	PCI: aardvark: Issue PERST via GPIO
	PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
	PCI: aardvark: Indicate error in 'val' when config read fails
	PCI: aardvark: Introduce an advk_pcie_valid_device() helper
	PCI: aardvark: Don't touch PCIe registers if no card connected
	PCI: aardvark: Fix compilation on s390
	PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
	PCI: aardvark: Update comment about disabling link training
	PCI: aardvark: Remove PCIe outbound window configuration
	PCI: aardvark: Configure PCIe resources from 'ranges' DT property
	PCI: aardvark: Fix PCIe Max Payload Size setting
	PCI: Add PCI_EXP_LNKCTL2_TLS* macros
	PCI: aardvark: Fix link training
	PCI: aardvark: Fix checking for link up via LTSSM state
	pinctrl: armada-37xx: Correct mpp definitions
	pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup
	pinctrl: armada-37xx: Correct PWM pins definitions
	arm64: dts: marvell: armada-37xx: declare PCIe reset pin
	arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
	hugetlbfs: flush TLBs correctly after huge_pmd_unshare
	proc/vmcore: fix clearing user buffer by properly using clear_user()
	NFC: add NCI_UNREG flag to eliminate the race
	fuse: release pipe buf after last use
	xen: sync include/xen/interface/io/ring.h with Xen's newest version
	xen/blkfront: read response from backend only once
	xen/blkfront: don't take local copy of a request from the ring page
	xen/blkfront: don't trust the backend response data blindly
	xen/netfront: read response from backend only once
	xen/netfront: don't read data from request on the ring page
	xen/netfront: disentangle tx_skb_freelist
	xen/netfront: don't trust the backend response data blindly
	tty: hvc: replace BUG_ON() with negative return value
	shm: extend forced shm destroy to support objects from several IPC nses
	ipc: WARN if trying to remove ipc object which is absent
	NFSv42: Fix pagecache invalidation after COPY/CLONE
	hugetlb: take PMD sharing into account when flushing tlb/caches
	net: return correct error code
	platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
	s390/setup: avoid using memblock_enforce_memory_limit
	btrfs: check-integrity: fix a warning on write caching disabled disk
	thermal: core: Reset previous low and high trip during thermal zone init
	scsi: iscsi: Unblock session then wake up error handler
	ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
	net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
	net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
	perf hist: Fix memory leak of a perf_hpp_fmt
	vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
	kprobes: Limit max data_size of the kretprobe instances
	sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
	sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
	fs: add fget_many() and fput_many()
	fget: check that the fd still exists after getting a ref to it
	natsemi: xtensa: fix section mismatch warnings
	net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
	net: mpls: Fix notifications when deleting a device
	siphash: use _unaligned version by default
	net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
	net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available
	net/rds: correct socket tunable error in rds_tcp_tune()
	net/smc: Keep smc_close_final rc during active close
	parisc: Fix KBUILD_IMAGE for self-extracting kernel
	parisc: Fix "make install" on newer debian releases
	vgacon: Propagate console boot parameters before calling `vc_resize'
	xhci: Fix commad ring abort, write all 64 bits to CRCR register.
	usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
	x86/64/mm: Map all kernel memory into trampoline_pgd
	tty: serial: msm_serial: Deactivate RX DMA for polling support
	serial: pl011: Add ACPI SBSA UART match id
	serial: core: fix transmit-buffer reset and memleak
	parisc: Mark cr16 CPU clocksource unstable on all SMP machines
	Linux 4.14.257

Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@google.com>
Change-Id: I3148611f406a61ce3d7ff7dcb56977a114a4f499
parents cc48e333 c01d4d1b
Loading
Loading
Loading
Loading
+17 −9
Original line number Diff line number Diff line
@@ -43,26 +43,26 @@ group emmc_nb

group pwm0
 - pin 11 (GPIO1-11)
 - functions pwm, gpio
 - functions pwm, led, gpio

group pwm1
 - pin 12
 - functions pwm, gpio
 - functions pwm, led, gpio

group pwm2
 - pin 13
 - functions pwm, gpio
 - functions pwm, led, gpio

group pwm3
 - pin 14
 - functions pwm, gpio
 - functions pwm, led, gpio

group pmic1
 - pin 17
 - pin 7
 - functions pmic, gpio

group pmic0
 - pin 16
 - pin 6
 - functions pmic, gpio

group i2c2
@@ -112,17 +112,25 @@ group usb2_drvvbus1
 - functions drvbus, gpio

group sdio_sb
 - pins 60-64
 - pins 60-65
 - functions sdio, gpio

group rgmii
 - pins 42-55
 - pins 42-53
 - functions mii, gpio

group pcie1
 - pins 39-40
 - pins 39
 - functions pcie, gpio

group pcie1_clkreq
 - pins 40
 - functions pcie, gpio

group smi
 - pins 54-55
 - functions smi, gpio

group ptp
 - pins 56-58
 - functions ptp, gpio
+1 −2
Original line number Diff line number Diff line
@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER

	0: disable any special handling on port reuse. The new
	connection will be delivered to the same real server that was
	servicing the previous connection. This will effectively
	disable expire_nodest_conn.
	servicing the previous connection.

	bit 1: enable rescheduling of new connections when it is safe.
	That is, whenever expire_nodest_conn and for TCP sockets, when
+1 −1
Original line number Diff line number Diff line
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 256
SUBLEVEL = 257
EXTRAVERSION =
NAME = Petit Gorille

+3 −1
Original line number Diff line number Diff line
@@ -246,6 +246,8 @@

			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pcie0: pcie@12000 {
@@ -365,7 +367,7 @@
	i2c0: i2c@18009000 {
		compatible = "brcm,iproc-i2c";
		reg = <0x18009000 0x50>;
		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clock-frequency = <100000>;
+8 −0
Original line number Diff line number Diff line
@@ -280,6 +280,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr
	tlb_add_flush(tlb, addr);
}

static inline void
tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
		    unsigned long size)
{
	tlb_add_flush(tlb, address);
	tlb_add_flush(tlb, address + size - PMD_SIZE);
}

#define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
Loading