Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3b68c4e0 authored by Om Parkash's avatar Om Parkash
Browse files

ARM: dts: msm: Add EEPROM node in camera sensor DTSi 



Add EEPROM node in camera sensor DTSi

Change-Id: I3a25a32fb550130da57e9d258242a9743802e3e3
Signed-off-by: default avatarOm Parkash <quic_oparkash@quicinc.com>
parent 1e190ec6

arch/arm64/boot/dts/qcom/trinket-camera-sensor-idp.dtsi

+55 −2
Original line number Diff line number Diff line
@@ -50,6 +50,11 @@ 
	};

};



&L3P {

	regulator-min-microvolt = <2800000>;

	regulator-max-microvolt = <3300000>;

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;
@@ -183,6 +188,53 @@ 
		qcom,clock-rates = <24000000 0>;

	};



	/*ToF imx528 sensor */

	eeprom3: qcom,eeprom@3 {

		cell-index = <3>;

		reg = <0x3>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 3300000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 3300000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active

				&cam_sensor_custom1_active

				&cam_sensor_custom2_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend

				&cam_sensor_custom1_suspend

				&cam_sensor_custom2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>,

			<&tlmm 44 0>,//VILLU_3P65

			<&tlmm 47 0>;//LDD_XCLR

		qcom,gpio-reset = <1>;

		qcom,gpio-custom1 = <2>;

		qcom,gpio-custom2 = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CUSTOM_GPIO1",//VILLU_3P65

					"CUSTOM_GPIO2";//LDD_XCLR

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK0_CLK_SRC>,

				<&clock_gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";
@@ -315,14 +367,15 @@ 
		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom3>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-min-voltage = <1800000 3300000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 3300000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";