Merge remote-tracking branch 'quic/msm-4.14' into dev/msm-4.14-display

* quic/msm-4.14:
  wil6210: report amsdu support in BA resp only if it is supported
  defconfig: sm8150: align with android config requirement
  defconfig: Enable page_owner for sm8150 on perf config
  lib: stackdepot: Add support to configure STACK_HASH_SIZE
  msm: kgsl: Fix gmu_dev_ops null pointer deference
  sched: fair: mark parent domain overutilized if !SD_LOAD_BALANCE
  power: smb5: Fix ITERM thresholds configuration
  ARM: dts: msm: Use correct msm-id for SM8150P
  msm: msm_bus: Ignore -EBUSY from disp rsc when sending AMC cmds
  defconfig: Add support for compiling sdxprairie target
  ARM: dts: msm: Add support for UART console on sdxprairie target
  ARM: dts: msm: change clk name for QRNG driver on SM8150
  adsprpc: Disable dynamic loading from HLOS_PHYSPOOL for qcs405
  msm: gsi: Update GSI driver to support 24 event ring channels
  msm: npu: Add loopback test
  ARM: dts: msm: Add rpm-smd irq number for qcs405
  drivers: qcom: rpm-smd: Remove glink and smd based rpm-smd support
  diag: Validate peripheral received from user for switch logging
  Documentation: sound: Add documentation for qcs405 nodes
  ARM: dts: msm: Add wcss tpdm node for sm8150
  scsi: ufs-qcom: Add flag to keep track of PHY's power state
  mhi: core: use kmemdup rather than duplicating it's implementation
  llcc: Update SCT table entries
  msm: kgsl: Add support for A608 GPU
  soc: qcom: qmi: Fix possible use after free
  net: qualcomm: rmnet: Add support for ethtool private stats for port
  net: qualcomm: rmnet: Add support for dowlink marker
  Revert "ARM: dts: Update NPU clocks for sm8150"
  Revert "msm: npu: Enable npu cti/apb/atb clocks"
  msm: adsprpc: use right DMA bit mask for 32 and 64 bit systems
  defconfig: sm8150: Enable USB UAC 2.0 drivers
  USB: f_accessory: Fix NULL pointer dereference in acc_read()
  USB: f_accessory: Fix crash if driver failed to initialize
  usb: gadget: f_accessory: Make RX buffer size aligned to EP's MTU
  USB: f_accessory: Set manufacturer and model string to default value
  mhi: core: use fixed-length string for mhi_device_id
  mhi: core: marked __packed only members that's required
  mhi: core: remove having compile option for CONFIG_OF flag
  sched/sysctl: check for min/max values for sched_{up,down}_migrate knobs
  ARM: dts: msm: Add the parent-supply property to the GPU CX GDSC on SM8150
  leds: qpnp-flash-v2: Fix HW_STROBE configuration
  leds: qpnp-flash-v2: Add support for multi-strobe
  ARM: dts: msm: Disable USB3.0 core for QCS405 on rumi
  wil6210: rate limit wil_rx_refill error
  wil6210: remove unused rx_reorder members
  ARM: dts: msm: Add CommandDB device bindings for sdmmagpie
  wil6210: Initialize reply struct of the WMI commands
  wil6210: move WMI functionality out of wil_cfg80211_mgmt_tx
  ARM: dts: msm: add system PM device binding for sdmmagpie
  wil6210: change reply_size arg to u16 in wmi_call
  wil6210: fix call to wil6210_disconnect during unload
  ARM: dts: msm: Add RSC mailbox controller device nodes for sdmmagpie
  wil6210: align to latest auto generated wmi.h
  ARM: dts: msm: Add PDC interrupt controller for sdmmagpie
  drivers: irqchip: qcom: Add PDC pin data for sdmmagpie
  ARM: dts: msm: Add LPM nodes for sdmmagpie
  ARM: dts: msm: Untrusted pointer dereference
  selinux: Relocate ss_initialized and selinux_enforcing to separate 4k
  drivers: mailbox: rpmh: Enhance debug logs
  defconfig: sm8150: Enable QTI haptics input driver
  Coresight: Modify reset channel for tmc-etf
  ARM: dts: msm: Remove 650MHz GPU clock for QCS405
  msm: vidc: Add support for ar50 bus bw governor
  ARM: dts: msm: Add NPU TPDM node for sm8150
  ARM: dts: msm: Fix incorrect device-tree pickup for SM8150+SDX50
  clk: qcom: Update order of clocks registration
  defconfig: enable HAVE_LOW_MEMORY_KILLER on all s[d]m configs
  ARM: dts: msm: Add CDSP pil node for SM6150
  nl80211: Fix external_auth check for offloaded authentication
  cfg80211: indicate support for external authentication
  nl80211: Allow SAE Authentication for NL80211_CMD_CONNECT
  cfg80211/nl80211: Optional authentication offload to userspace
  Linux 4.14.50
  crypto: omap-sham - fix memleak
  crypto: vmx - Remove overly verbose printk from AES XTS init
  crypto: vmx - Remove overly verbose printk from AES init routines
  crypto: cavium - Limit result reading attempts
  crypto: cavium - Fix fallout from CONFIG_VMAP_STACK
  crypto: caam - fix size of RSA prime factor q
  crypto: caam/qi - fix IV DMA mapping and updating
  crypto: caam - fix IV DMA mapping and updating
  crypto: caam - fix DMA mapping dir for generated IV
  crypto: caam - strip input zeros from RSA input buffer
  Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
  Input: goodix - add new ACPI id for GPD Win 2 touch screen
  kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
  tty: pl011: Avoid spuriously stuck-off interrupts
  vmw_balloon: fixing double free when batching mode is off
  serial: 8250: omap: Fix idling of clocks for unused uarts
  serial: samsung: fix maxburst parameter for DMA transactions
  tty/serial: atmel: use port->name as name in request_irq()
  serial: sh-sci: Stop using printk format %pCr
  usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
  usb: gadget: function: printer: avoid wrong list handling in printer_write()
  phy: qcom-qusb2: Fix crash if nvmem cell not specified
  Input: xpad - add GPD Win 2 Controller USB IDs
  usb-storage: Add compatibility quirk flags for G-Technologies G-Drive
  usb-storage: Add support for FL_ALWAYS_SYNC flag in the UAS driver
  usbip: vhci_sysfs: fix potential Spectre v1
  NFC: pn533: don't send USB data off of the stack
  staging: android: ion: Switch to pr_warn_once in ion_buffer_destroy
  KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
  kvm: nVMX: Enforce cpl=0 for VMX instructions
  KVM: x86: introduce linear_{read,write}_system
  KVM: X86: Fix reserved bits check for MOV to CR3
  gpio: No NULL owner
  af_key: Always verify length of provided sadb_key
  blkdev_report_zones_ioctl(): Use vmalloc() to allocate large buffers
  netfilter: nf_tables: fix NULL pointer dereference on nft_ct_helper_obj_dump()
  defconfig: Change panic timeout for target sm8150
  msm: npu: Return network handle to user instead of id
  msm: kgsl: Fix the DCVS table definition
  msm: kgsl: Clear OOB for CP init if HFI start fails
  ARM: dts: msm: Add cdsp rpmsg entry in sm8150
  mmc: core: Remove obsolete members from mmc_queue
  mmc: core: Update cmdq for making use of per-request data
  ARM: dts: msm: Add cti0 for tmc-etr/etf node for sm8150
  ARM: dts: msm: Include ION DT changes for sdxprairie
  of: make kobject and bin_attribute support configurable
  of: wrap accesses to device_node kobject
  ARM: dts: msm: Include reserved-memory DT changes for sdxprairie
  arm64: ssbd: Add prctl interface for per-thread mitigation
  arm64: ssbd: Introduce thread flag to control userspace mitigation
  arm64: ssbd: Restore mitigation status on CPU resume
  arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
  arm64: ssbd: Add global mitigation state accessor
  arm64: Add 'ssbd' command-line option
  arm64: Add ARCH_WORKAROUND_2 probing
  arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
  arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
  arm/arm64: smccc: Add SMCCC-specific return codes
  msm: fastcvpd: removing spin_lock around hyp_assign
  defconfig: qcs405: enable MDSS PLL driver

Change-Id: I5e1892edbdda4c06706a0015ed9bc582ed7290fe
Signed-off-by: Namratha Siddappa <namratha@codeaurora.org>