Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0c4f6840 authored by qctecmdr's avatar qctecmdr Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Add qcom regulator-hw-type DT property"

parents 527e8341 57882134

arch/arm64/boot/dts/qcom/mdm9607-mtp.dtsi

+51 −58
Original line number Diff line number Diff line
@@ -69,50 +69,64 @@ 
	status = "ok";

};



/* MPP pin 2 configs for SMB358 interrupt line */

&pm8019_mpps {

	mpp@a100 {

		qcom,mode = <0>;	/* Digital input */

		qcom,vin-sel = <3>;	/* 1.8V (L11) */

		qcom,src-sel = <0>;	/* QPNP_PIN_SEL_FUNC_CONSTANT */

		qcom,pull = <2>;	/* PULL UP 10KOHM */

		qcom,master-en = <1>;

	/* MPP 2 configs for SMB358 interrupt line */

	smb_stat {

		smb_stat_default: smb_stat_default {

			pins = "mpp2";

			function = "digital";

			input-enable;

		};

	};



	mpp@a300 { /* MPP 4 */

		pins = "mpp4";

		function = "digital";

		output-high;

	};

};



&pm8019_gpios {

	gpio@c100 { /* BT_EN */

		qcom,mode = <1>;         /* Digital output*/

		qcom,pull = <4>;         /* Pulldown 10uA */

		qcom,vin-sel = <2>;      /* VIN2 */

		qcom,src-sel = <0>;      /* GPIO */

		qcom,invert = <0>;       /* Invert */

		qcom,master-en = <1>;    /* Enable GPIO */

		status = "ok";

		/* PMIC GPIO 1 for wlan power supply */

	wlan_en {

		wlan_en_default_wlan_en_default {

			pins = "gpio1";

			function = "normal";

			output-high;

			bias-pull-up;

			qcom,drive-strength = <1>;

			power-source = <1>;

		};

	};



	/* PMIC gpio for wlan power supply */

	gpio@c200 {

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <1>;		/* Output high */

		qcom,vin-sel = <3>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "okay";

	bt_en {

		bt_en_default: bt_en_default {  /* BT_EN GPIO 2*/

			pins = "gpio2";

			function = "normal";

			output-low;

			bias-pull-down;

			qcom,drive-strength = <2>;

			power-source = <1>;

		};

	};



	/* ROME 32k Sleep Clock */

	gpio@c300 { /* GPIO 4 */

		pins = "gpio4";

		function = "normal";

		output-high;

		bias-pull-up;

		qcom,drive-strength = <1>;

		power-source = <1>;

	};



	/* ROME 32k GPIO 6 Sleep Clock */

	gpio@c500 {

		qcom,mode = <1>;               /* Digital output */

		qcom,output-type = <0>;        /* CMOS logic */

		qcom,invert = <0>;             /* no inversion */

		qcom,vin-sel = <2>;            /* VIN 2 */

		qcom,src-sel = <2>;            /* Function 2 */

		qcom,out-strength = <2>;       /* Medium */

		qcom,master-en = <1>;          /* Enable GPIO */

		status = "ok";

		pins = "gpio6";

		function = "normal";

		output-low;

		bias-pull-down;

		qcom,drive-strength = <2>;

		power-source = <1>;

	};

};
@@ -132,29 +146,6 @@ 
	status = "ok";

};



&pm8019_gpios {

	gpio@c300 { /* GPIO 4 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <0>;		/* Output high */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,out-strength = <1>;	/* Low drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};

};



/* MPP pin 4 configs for SGMII */

&pm8019_mpps {

	mpp@a300 { /* MPP 4 */

		qcom,mode = <1>;		/* Digital output */

		qcom,vin-sel = <2>;		/* 1.8V */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "okay";

	};

};



&i2c_4 {

	/* SMB358 charger configuration */

	smb358_otg_vreg: smb358-charger@57 {
@@ -162,7 +153,9 @@ 
		regulator-name = "smb358_otg_vreg";

		reg = <0x57>;

		interrupt-parent = <&spmi_bus>;

		interrupts = <0x0 0xa1 0x0>;	/* PMIC MPP 2 */

		interrupts = <0x0 0xa1 0 IRQ_TYPE_NONE>;	/* PMIC MPP 2 */

		pinctrl-names = "default";

		pinctrl-0 = <&smb_stat_default>;

		qcom,float-voltage-mv = <4200>;

		qcom,irq-gpio = <&pm8019_mpps 2 0>;

		qcom,chg-vadc = <&pm8019_vadc>;

arch/arm64/boot/dts/qcom/mdm9607-regulator.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -10,7 +10,7 @@ 
 * GNU General Public License for more details.

 */



&rpm_bus {

&rpm_requests {

	rpm-regulator-smpa2 {

		status = "okay";

		mdm9607_s2: regulator-s2 {

arch/arm64/boot/dts/qcom/mdm9607.dtsi

+50 −105
Original line number Diff line number Diff line
@@ -16,6 +16,8 @@ 
#include <dt-bindings/clock/msm-clocks-a7.h>

#include <dt-bindings/interrupt-controller/arm-gic.h>

#include <dt-bindings/regulator/qcom,rpm-smd-regulator.h>

#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>



/ {

	model = "Qualcomm Technologies, Inc. MDM 9607";
@@ -1527,21 +1529,20 @@ 


	spmi_bus: qcom,spmi@200f000 {

		compatible = "qcom,spmi-pmic-arb";

		reg = <0x200f000 0x1000>,

		reg = <0x200f000 0xa00>,

			<0x2400000 0x800000>,

			<0x2c00000 0x800000>,

			<0x3800000 0x200000>,

			<0x200a000 0x2100>;

		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";

		interrupt-names = "periph_irq";

		interrupts = <0 190 0>;

		qcom,pmic-arb-channel = <0>;

		qcom,pmic-arb-max-peripherals = <128>;

		qcom,pmic-arb-max-periph-interrupts = <128>;

		qcom,pmic-arb-ee = <0>;

		#interrupt-cells = <3>;

		interrupt-controller;

		qcom,ee = <0>;

		qcom,channel = <0>;

		#address-cells = <1>;

		#size-cells = <0>;

		#size-cells = <1>;

		interrupt-controller;

		#interrupt-cells = <4>;

		cell-index = <0>;

	};
@@ -1814,19 +1815,16 @@ 
	};

};



#include "mdm9607-rpm-regulator.dtsi"

#include "msm-pm8019.dtsi"

#include "pm8019-rpm-regulator.dtsi"

#include "pm8019.dtsi"

#include "mdm9607-regulator.dtsi"



/* MPP pin 1 config for USB ID interrupt line */

&pm8019_mpps {

	mpp@a000 {

		qcom,mode = <0>;	/* Digital input */

		qcom,vin-sel = <3>;	/* 1.8V (L11) */

		qcom,src-sel = <0>;	/* QPNP_PIN_SEL_FUNC_CONSTANT */

		qcom,pull = <2>;	/* PULL UP 10KOHM */

		qcom,master-en = <1>;

		status = "okay";

		pins = "mpp1";

		function = "digital";

		input-enable;

	};

};
@@ -1835,109 +1833,56 @@ 
};



&pm8019_vadc {

	chan@6 {

	vbat_sns {

		label = "vbat_sns";

		reg = <6>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <1>;

		qcom,calibration-type = "absolute";

		qcom,scale-function = <0>;

		qcom,hw-settle-time = <0>;

		qcom,fast-avg-setup = <0>;

		reg = <VADC_VBAT_SNS>;

		qcom,pre-scaling = <1 3>;

	};



	chan@7 {

	vph_pwr {

		label = "vph_pwr";

		reg = <7>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <1>;

		qcom,calibration-type = "absolute";

		qcom,scale-function = <0>;

		qcom,hw-settle-time = <0>;

		qcom,fast-avg-setup = <0>;

		reg = <VADC_VSYS>;

		qcom,pre-scaling = <1 3>;

	};



	chan@31 {

	batt_id_therm {

		label = "batt_id_therm";

		reg = <0x31>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <0>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	 };



	chan@33 {

		label = "pa_therm0";

		reg = <0x33>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};



	chan@34 {

		reg = <VADC_LR_MUX2_BAT_ID>;

		qcom,ratiometric;

		qcom,pre-scaling = <1 1>;

		qcom,hw-settle-time = <200>;

	};



	pa_therm1 {

		label = "pa_therm1";

		reg = <0x34>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

		reg = <VADC_LR_MUX4_AMUX_THM1>;

		qcom,ratiometric;

		qcom,pre-scaling = <1 1>;

		qcom,hw-settle-time = <200>;

	};



	pa_therm2 {

		label = "pa_therm2";

		reg = <VADC_LR_MUX5_AMUX_THM2>;

		qqcom,ratiometric;

		qcom,pre-scaling = <1 1>;

		qcom,hw-settle-time = <200>;

	};



	chan@32 {

	xo_therm {

		label = "xo_therm";

		reg = <0x32>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <4>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

		reg = <VADC_LR_MUX3_XO_THERM>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};



	chan@3c {

	xo_therm_amux {

		label = "xo_therm_amux";

		reg = <0x3c>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <4>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};

};



&pm8019_adc_tm {

	/* Channel Node */

	chan@33 {

		label = "pa_therm0";

		reg = <0x33>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

		qcom,btm-channel-number = <0x48>;

		qcom,thermal-node;

	};



	chan@34 {

		label = "pa_therm1";

		reg = <0x34>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

		qcom,btm-channel-number = <0x68>;

		qcom,thermal-node;

		reg = <VADC_LR_MUX3_BUF_XO_THERM>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};



};

arch/arm64/boot/dts/qcom/msm-pm8019.dtsi

deleted100644 → 0
+0 −404
Original line number Diff line number Diff line 
/* Copyright (c) 2012,2013,2015, Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&spmi_bus {

	#address-cells = <1>;

	#size-cells = <0>;

	interrupt-controller;

	#interrupt-cells = <3>;



	qcom,pm8019@0 {

		spmi-slave-container;

		reg = <0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm8019_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		qcom,power_on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x2>;

			interrupt-names = "cblpwr";

			qcom,pon-dbc-delay = <15625>;

			qcom,system-reset;



			qcom,pon_1 {

				qcom,pon-type = <2>;

				qcom,pull-up = <1>;

				linux,code = <116>;

			};

		};





		rtc {

			spmi-dev-container;

			compatible = "qcom,qpnp-rtc";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,qpnp-rtc-write = <0>;

			qcom,qpnp-rtc-alarm-pwrup = <0>;



			qcom,pm8019_rtc_rw@6000 {

				reg = <0x6000 0x100>;

			};



			qcom,pm8019_rtc_alarm@6100 {

				reg = <0x6100 0x100>;

				interrupts = <0x0 0x61 0x1>;

			};

		};



		pm8019_gpios: gpios {

			spmi-dev-container;

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8019-gpio";



			gpio@c000 {

				reg = <0xc000 0x100>;

				qcom,pin-num = <1>;

			};



			gpio@c100 {

				reg = <0xc100 0x100>;

				qcom,pin-num = <2>;

			};



			gpio@c200 {

				reg = <0xc200 0x100>;

				qcom,pin-num = <3>;

			};



			gpio@c300 {

				reg = <0xc300 0x100>;

				qcom,pin-num = <4>;

			};



			gpio@c400 {

				reg = <0xc400 0x100>;

				qcom,pin-num = <5>;

			};



			gpio@c500 {

				reg = <0xc500 0x100>;

				qcom,pin-num = <6>;

			};

		};



		pm8019_mpps: mpps {

			spmi-dev-container;

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8019-mpp";



			mpp@a000 {

				reg = <0xa000 0x100>;

				qcom,pin-num = <1>;

			};



			mpp@a100 {

				reg = <0xa100 0x100>;

				qcom,pin-num = <2>;

			};



			mpp@a200 {

				reg = <0xa200 0x100>;

				qcom,pin-num = <3>;

			};



			mpp@a300 {

				reg = <0xa300 0x100>;

				qcom,pin-num = <4>;

			};



			mpp@a400 {

				reg = <0xa400 0x100>;

				qcom,pin-num = <5>;

			};



			mpp@a500 {

				reg = <0xa500 0x100>;

				qcom,pin-num = <6>;

			};

		};



		pm8019_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;



			chan@8 {

				label = "die_temp";

				reg = <8>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@9 {

				label = "ref_625mv";

				reg = <9>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@a {

				label = "ref_1250v";

				reg = <0xa>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};

		};



		pm8019_adc_tm: vadc@3400 {

			compatible = "qcom,qpnp-adc-tm";

			reg = <0x3400 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts =	<0x0 0x34 0x0>,

					<0x0 0x34 0x3>,

				     <0x0 0x34 0x4>;

			interrupt-names =	"eoc-int-en-set",

						"high-thr-en-set",

						"low-thr-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc_tm-vadc = <&pm8019_vadc>;

			qcom,adc-vdd-reference = <1800>;

		};

	};



	qcom,pm8019@1 {

		spmi-slave-container;

		reg = <0x1>;

		#address-cells = <1>;

		#size-cells = <1>;



		regulator@1400 {

			regulator-name = "8019_s1";

			spmi-dev-container;

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "qcom,qpnp-regulator";

			reg = <0x1400 0x300>;

			status = "disabled";



			qcom,ctl@1400 {

				reg = <0x1400 0x100>;

			};

			qcom,ps@1500 {

				reg = <0x1500 0x100>;

			};

			qcom,freq@1600 {

				reg = <0x1600 0x100>;

			};

		};



		regulator@1700 {

			regulator-name = "8019_s2";

			spmi-dev-container;

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "qcom,qpnp-regulator";

			reg = <0x1700 0x300>;

			status = "disabled";



			qcom,ctl@1700 {

				reg = <0x1700 0x100>;

			};

			qcom,ps@1800 {

				reg = <0x1800 0x100>;

			};

			qcom,freq@1900 {

				reg = <0x1900 0x100>;

			};

		};



		regulator@1a00 {

			regulator-name = "8019_s3";

			spmi-dev-container;

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "qcom,qpnp-regulator";

			reg = <0x1a00 0x300>;

			status = "disabled";



			qcom,ctl@1a00 {

				reg = <0x1a00 0x100>;

			};

			qcom,ps@1b00 {

				reg = <0x1b00 0x100>;

			};

			qcom,freq@1c00 {

				reg = <0x1c00 0x100>;

			};

		};



		regulator@1d00 {

			regulator-name = "8019_s4";

			spmi-dev-container;

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "qcom,qpnp-regulator";

			reg = <0x1d00 0x300>;

			status = "disabled";



			qcom,ctl@1d00 {

				reg = <0x1d00 0x100>;

			};

			qcom,ps@1e00 {

				reg = <0x1e00 0x100>;

			};

			qcom,freq@1f00 {

				reg = <0x1f00 0x100>;

			};

		};



		regulator@4000 {

			regulator-name = "8019_l1";

			reg = <0x4000 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4100 {

			regulator-name = "8019_l2";

			reg = <0x4100 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4200 {

			regulator-name = "8019_l3";

			reg = <0x4200 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4300 {

			regulator-name = "8019_l4";

			reg = <0x4300 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4400 {

			regulator-name = "8019_l5";

			reg = <0x4400 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4500 {

			regulator-name = "8019_l6";

			reg = <0x4500 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4600 {

			regulator-name = "8019_l7";

			reg = <0x4600 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4700 {

			regulator-name = "8019_l8";

			reg = <0x4700 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4800 {

			regulator-name = "8019_l9";

			reg = <0x4800 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4900 {

			regulator-name = "8019_l10";

			reg = <0x4900 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4a00 {

			regulator-name = "8019_l11";

			reg = <0x4a00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4b00 {

			regulator-name = "8019_l12";

			reg = <0x4b00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4c00 {

			regulator-name = "8019_l13";

			reg = <0x4c00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4d00 {

			regulator-name = "8019_l14";

			reg = <0x4d00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4e00 {

			regulator-name = "8019_ldo_xo";

			reg = <0x4e00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};



		regulator@4f00 {

			regulator-name = "8019_ldo_rfclk";

			reg = <0x4f00 0x100>;

			compatible = "qcom,qpnp-regulator";

			status = "disabled";

		};

	};

};

arch/arm64/boot/dts/qcom/mdm9607-rpm-regulator.dtsi→arch/arm64/boot/dts/qcom/pm8019-rpm-regulator.dtsi

+15 −1
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ 
 * GNU General Public License for more details.

 */



&rpm_bus {

&rpm_requests {

	rpm-regulator-smpa1 {

		qcom,resource-name = "smpa";

		qcom,resource-id = <1>;
@@ -80,6 +80,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <1>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -96,6 +97,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <2>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <5000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -112,6 +114,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <3>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -128,6 +131,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <4>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <5000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -144,6 +148,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <5>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -160,6 +165,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <6>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -176,6 +182,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <7>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -192,6 +199,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <8>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -208,6 +216,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <9>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -224,6 +233,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <10>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -240,6 +250,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <11>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -256,6 +267,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <12>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -272,6 +284,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <13>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";
@@ -288,6 +301,7 @@ 
		qcom,resource-name = "ldoa";

		qcom,resource-id = <14>;

		qcom,regulator-type = <0>;

		qcom,regulator-hw-type = "pmic4-ldo";

		qcom,hpm-min-load = <10000>;

		compatible = "qcom,rpm-smd-regulator-resource";

		status = "disabled";