Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit fae50924 authored by Hoegeun Kwon's avatar Hoegeun Kwon Committed by Thierry Reding
Browse files

dt-bindings: Add support for Samsung s6e3ha2 panel binding 



The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected using
MIPI-DSI interfaces.

Signed-off-by: default avatarDonghwa Lee <dh09.lee@samsung.com>
Signed-off-by: default avatarHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: default avatarHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 966fea78

Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt

0 → 100644
+28 −0
Original line number Diff line number Diff line 
Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel



Required properties:

  - compatible: "samsung,s6e3ha2"

  - reg: the virtual channel number of a DSI peripheral

  - vdd3-supply: I/O voltage supply

  - vci-supply: voltage supply for analog circuits

  - reset-gpios: a GPIO spec for the reset pin (active low)

  - enable-gpios: a GPIO spec for the panel enable pin (active high)



Optional properties:

  - te-gpios: a GPIO spec for the tearing effect synchronization signal

    gpio pin (active high)



Example:

&dsi {

	...



	panel@0 {

		compatible = "samsung,s6e3ha2";

		reg = <0>;

		vdd3-supply = <&ldo27_reg>;

		vci-supply = <&ldo28_reg>;

		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;

		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;

		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;

	};

};