Merge remote-tracking branch 'remotes/origin/tmp-6e962a34' into msm-4.14

* remotes/origin/tmp-6e962a34:
  Linux 4.14.44
  rtc: goldfish: Add missing MODULE_LICENSE
  rtc: rp5c01: fix possible race condition
  rtc: tx4939: avoid unintended sign extension on a 24 bit shift
  rtc: m41t80: fix race conditions
  rtc: rk808: fix possible race condition
  rtc: hctosys: Ensure system time doesn't overflow time_t
  rtc: snvs: Fix usage of snvs_rtc_enable
  serial: altera: ensure port->regshift is honored consistently
  serial: 8250: Don't service RX FIFO if interrupts are disabled
  serial: arc_uart: Fix out-of-bounds access through DT alias
  serial: fsl_lpuart: Fix out-of-bounds access through DT alias
  serial: imx: Fix out-of-bounds access through serial port index
  serial: mxs-auart: Fix out-of-bounds access through serial port index
  serial: samsung: Fix out-of-bounds access through serial port index
  serial: sh-sci: Fix out-of-bounds access through DT alias
  serial: xuartps: Fix out-of-bounds access through DT alias
  media: cx25821: prevent out-of-bounds read on array card
  media: vivid: fix incorrect capabilities for radio
  media: vb2: Fix videobuf2 to map correct area
  media: i2c: adv748x: fix HDMI field heights
  media: v4l: vsp1: Fix display stalls when requesting too many inputs
  media: em28xx: Add Hauppauge SoloHD/DualHD bulk models
  media: lgdt3306a: Fix a double kfree on i2c device remove
  media: s3c-camif: fix out-of-bounds array access
  media: cx23885: Set subdev host data to clk_freq pointer
  media: cx23885: Override 888 ImpactVCBe crystal frequency
  media: ov5645: add missing of_node_put() in error path
  media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
  media: dmxdev: fix error code for invalid ioctls
  clk: samsung: exynos3250: Fix PLL rates
  clk: samsung: exynos5250: Fix PLL rates
  clk: samsung: exynos5433: Fix PLL rates
  clk: samsung: exynos5260: Fix PLL rates
  clk: samsung: exynos7: Fix PLL rates
  clk: samsung: s3c2410: Fix PLL rates
  clk: rockchip: Prevent calculating mmc phase if clock rate is zero
  clk: tegra: Fix pll_u rate configuration
  clk: hisilicon: mark wdt_mux_p[] as const
  clk: Don't show the incorrect clock phase
  clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
  ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
  ASoC: topology: create TLV data for dapm widgets
  ASoC: samsung: odroid: Fix 32000 sample rate handling
  ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs
  ASoC: hdmi-codec: Fix module unloading caused kernel crash
  scsi: lpfc: Fix frequency of Release WQE CQEs
  scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
  scsi: lpfc: Fix issue_lip if link is disabled
  scsi: mvsas: fix wrong endianness of sgpio api
  scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD
  scsi: aacraid: Insure command thread is not recursively stopped
  scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled
  scsi: sd: Keep disk read-only when re-reading partition
  scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
  scsi: qedi: Fix kernel crash during port toggle
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write
  crypto: inside-secure - fix the invalidation step during cra_exit
  crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
  crypto: inside-secure - fix the extra cache computation
  crypto: inside-secure - fix the cache_len computation
  crypto: inside-secure - do not process request if no command was issued
  crypto: ccp - don't disable interrupts while setting up debugfs
  crypto: atmel-aes - fix the keys zeroing on errors
  crypto: inside-secure - wait for the request to complete if in the backlog
  staging: lustre: lmv: correctly iput lmo_root
  staging: ks7010: Use constants from ieee80211_eid instead of literal ints.
  staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
  staging: fsl-dpaa2/eth: Fix incorrect casts
  staging: lustre: fix bug in osc_enter_cache_try
  staging: bcm2835-audio: Release resources on module_exit()
  xhci: Show what USB release number the xHC supports from protocol capablity
  Bluetooth: btusb: Add device ID for RTL8822BE
  media: em28xx: USB bulk packet size fix
  media: lgdt3306a: Fix module count mismatch on usb unplug
  usb: gadget: composite: fix incorrect handling of OS desc requests
  usb: gadget: udc: change comparison to bitshift when dealing with a mask
  usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS
  usb: gadget: ffs: Execute copy_to_user() with USER_DS set
  usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
  usb: dwc2: host: Fix transaction errors in host mode
  usb: dwc2: hcd: Fix host channel halt flow
  usb: dwc2: Fix interval type issue
  xhci: zero usb device slot_id member when disabling and freeing a xhci slot
  usb: dwc3: Makefile: fix link error on randconfig
  usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
  usb: dwc3: Add SoftReset PHY synchonization delay
  ALSA: usb-audio: Add native DSD support for Luxman DA-06
  Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB
  net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
  net/usb/qmi_wwan.c: Add USB id for lt4120 modem
  USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
  usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
  ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
  net: usbnet: fix potential deadlock on 32bit hosts
  usb: cdc_acm: prevent race at write to acm while system resumes
  usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
  usb: gadget: fsl_udc_core: fix ep valid checks
  usb: gadget: core: Fix use-after-free of usb_request
  usb: dwc3: omap: don't miss events during suspend/resume
  usb: dwc3: Undo PHY init if soft reset fails
  usb: gadget: f_uac2: fix bFirstInterface in composite gadget
  x86/kexec: Avoid double free_page() upon do_kexec_load() failure
  hfsplus: stop workqueue when fill_super() failed
  cfg80211: limit wiphy names to 128 bytes
  loop: fix LOOP_GET_STATUS lock imbalance
  loop: don't call into filesystem while holding lo_ctl_mutex
  scsi: zfcp: fix infinite iteration on ERP ready list
  scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()
  scsi: libsas: defer ata device eh commands to libata
  s390: use expoline thunks in the BPF JIT
  s390: extend expoline to BC instructions
  s390: move spectre sysfs attribute code
  s390/kernel: use expoline for indirect branches
  s390/ftrace: use expoline for indirect branches
  s390/lib: use expoline for indirect branches
  s390/crc32-vx: use expoline for indirect branches
  s390: move expoline assembler macros to a header
  s390: add assembler macros for CPU alternatives
  ext2: fix a block leak
  sparc: vio: use put_device() instead of kfree()
  hv_netvsc: Fix net device attach on older Windows hosts
  hv_netvsc: Ensure correct teardown message sequence order
  hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()
  hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown
  hv_netvsc: common detach logic
  hv_netvsc: change GPAD teardown order on older versions
  hv_netvsc: use RCU to fix concurrent rx and queue changes
  hv_netvsc: disable NAPI before channel close
  hv_netvsc: defer queue selection to VF
  hv_netvsc: fix race in napi poll when rescheduling
  hv_netvsc: cancel subchannel setup before halting device
  hv_netvsc: fix error unwind handling if vmbus_open fails
  hv_netvsc: only wake transmit queue if link is up
  hv_netvsc: avoid retry on send during shutdown
  hv_netvsc: Use the num_online_cpus() for channel limit
  hv_netvsc: empty current transmit aggregation if flow blocked
  hv_netvsc: preserve hw_features on mtu/channels/ringparam changes
  hv_netvsc: netvsc_teardown_gpadl() split
  hv_netvsc: Set tx_table to equal weight after subchannels open
  hv_netvsc: Add initialization of tx_table in netvsc_device_add()
  hv_netvsc: Rename tx_send_table to tx_table
  hv_netvsc: Rename ind_table to rx_table
  hv_netvsc: Fix the real number of queues of non-vRSS cases
  vmxnet3: use DMA memory barriers where required
  vmxnet3: set the DMA mask before the first DMA map operation
  tcp: purge write queue in tcp_connect_init()
  sock_diag: fix use-after-free read in __sk_free
  packet: in packet_snd start writing at link layer allocation
  net: test tailroom before appending to linear skb
  net/smc: check for missing nlattrs in SMC_PNETID messages
  net: sched: red: avoid hashing NULL child
  net/sched: fix refcnt leak in the error path of tcf_vlan_init()
  net/mlx4_core: Fix error handling in mlx4_init_port_info.
  net: Fix a bug in removing queues from XPS map
  ANDROID: proc: fix undefined behavior in proc_uid_base_readdir
  x86: vdso: Fix leaky vdso linker with CC=clang.
  ANDROID: x86_64_cuttlefish_defconfig: Disable ORC unwinder.
  ANDROID: build: cuttlefish: Upgrade clang to newer version.
  ANDROID: build: cuttlefish: Upgrade clang to newer version.
  ANDROID: build: cuttlefish: Fix path to clang.

Conflicts:
	drivers/scsi/sd.c
	drivers/scsi/ufs/ufshcd.c
	drivers/usb/gadget/function/f_fs.c

Change-Id: Iba64240c1ddf00c0ba4531740be132a385bc4f5e
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>